Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Use gst_pad_check_pull_range() before _activate_pull()
to avoid unnecessary open/close (see #331690).
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/basesrc.c: (eos_event_counter),
(basesrc_eos_events_pull), (basesrc_eos_events_push),
(basesrc_eos_events_push_live_op), (basesrc_eos_events_pull_live_op),
(gst_basesrc_suite), (main):
... and add some tests for the base source EOS stuff.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_buffer_probe_n_times):
Test case originally showed the problem fixed below,
but was then amended. Add checks back at the place
where they used to be.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_loop),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
* libs/gst/base/gstbasesrc.h:
Don't unconditionally send EOS when going from PAUSED to
READY state, esp. make sure we don't send two EOS events
in some cases (e.g. one when reaching EOS and one when
going from PAUSED to READY). Also, we don't want to send
EOS events when operating in pull mode. However, we do
want to send an EOS event when shutting down a live
source explicitly, for example (fixes#330996).
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Update src->read_position after a seek when not using mmap.
Fixes#332277, patch by: Renchi Raju <renchi gmail com>
Original commit message from CVS:
* gst/Makefile.am:
* gst/gstparse.h:
* gst/gstutils.c:
* gst/gstutils.h:
Make things work with --disable-parse as they do with
--disable-load-save - the symbols involved disappear, but the
header is still installed and GST_DISABLE_PARSE is included via
gstconfig.h
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_change_state): Fix a stupid bug. I was
sure i compiled that.
------------------------------------------------------
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_blocked_async):
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe): Make those function act on the
ghostpad target when it's a ghostpad. (Closes#331727)
------------------------------------------------------
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_change_state): Make basetransform reusable.
(Closes#331898)
------------------------------------------------------
Original commit message from CVS:
* docs/random/release:
Move the current documentation of how to do a release to the top
of the file.
* gst/gstbin.c: (gst_bin_class_init),
(gst_bin_handle_message_func):
Allow multiple state-recalculation threads. (Closes#328873)
Original commit message from CVS:
2006-02-19 Julien MOUTTE <julien@moutte.net>
* gst/gstinfo.h: Add GST_STR_NULL to the second string.
* gst/gstpad.c: (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_getcaps_function): GST_DEBUG_PAD_NAME evaluates to
2 strings. You can't use the STR_NULL macro on that.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_event_function),
(gst_pad_set_query_function), (gst_pad_set_query_type_function),
(gst_pad_set_getcaps_function)
* gst/parse/grammar.y: (gst_parse_found_pad), (gst_parse_perform_delayed_link)
Fixed NULL pointer used in GST_CAT_DEBUG using GST_STR_NULL macro
So now, we can use --gst-debug-level=5 on Windows
* win32/common/libgstcontroller.def:
Added export of gst_controller_init
* win32/vs6/libgstcontroller.dsp:
Fixed Release post build configuration
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (find_peek):
We can do peeks at non-zero offsets, as long as they
fall within the buffer we have.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
When typefinding is unsuccessful in the chain function, don't
error out immediately. Only error out with NO_CAPS_FOUND if
the amount of data is at least MAX_TYPEFIND_SIZE bytes,
otherwise simply wait for more data so we can try typefinding
again with more data later. Also, don't attempt to typefind
if we have less than MIN_TYPEFIND_SIZE data available. Overall,
this should improve typefinding from network sources where the
size of the first buffer can be somewhat random.
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_get_default),
(_gst_registry_cleanup):
Protect default registry with lock and ref/sink it.
Fixes#324818, patch by Torsten Schoenfeld.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (data_probe), (buffer_probe),
(event_probe), (GST_START_TEST):
Only events up to the pipeline EOS are counted, there are
some more when going to NULL currently which we don't care
about for now.
Original commit message from CVS:
2006-02-10 Andy Wingo <wingo@pobox.com>
* gst/gstbus.c (gst_bus_class_init): Declare our private data
structure.
(gst_bus_init): Cache the location of the private data in the
instance structure.
(gst_bus_enable_sync_message_emission)
(gst_bus_disable_sync_message_emission): Implement new public
functions.
(gst_bus_post): Emit the sync-message signal if the user asked for
it. Fixes#330684.
* gst/gstbus.h (GstBus): Use a padding pointer to cache the
location of the bus-private structuure.
(gst_bus_enable_sync_message_emission)
(gst_bus_disable_sync_message_emission): New public functions.
Original commit message from CVS:
=== release 0.10.3 ===
2006-02-08 Jan Schmidt <thaytan@mad.scientist.com>
* configure.ac:
releasing 0.10.3, "Like a virgin"
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstcollectpads.c (gst_collect_pads_chain): Only
update last_stop if we're in TIME format and the timestamp is
valid.
* libs/gst/base/gstcollectpads.c (gst_collect_pads_event)
* libs/gst/base/gstbasetransform.c (gst_base_transform_eventfunc):
* libs/gst/base/gstbasesink.c (gst_base_sink_configure_segment):
If we get a new newsegment with a different format, adapt
accordingly.
* gst/gstclock.c (gst_clock_set_calibration): Accept a numerator
of 0. Not a problem, really.
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_chain_unlocked): Only
warn if sync=true.
Original commit message from CVS:
* win32/vs7:
project files updated to the default vs7 configuration
* win32/common/libgstbase.def:
* win32/common/libgstreamer.def:
added new symbols,
removed empty lines,
sorted all exported symbols alphabetically
* win32/common/dirent.c:
* win32/common/dirent.h:
* win32/common/gchar.h:
use windows line end.
Original commit message from CVS:
2006-02-05 Julien MOUTTE <julien@moutte.net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_event): Collectpads now holds a reference
to the GstPad that was added. Indeed we don't want to look
at pads that might just go away with no warning...
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_parse_bin_from_description),
(gst_utils_suite):
Add some simple tests for gst_parse_bin_from_description() and
gst_bin_find_unconnected_pad() (#329069).
