Commit graph

1889 commits

Author SHA1 Message Date
Sebastian Dröge
72b7677914 Release 1.9.90 2016-09-30 13:02:55 +03:00
Tim-Philipp Müller
b6a85dc45b configure: fix --disable-external
conditional "USE_VULKAN" was never defined
2016-09-19 10:18:22 +01:00
Scott D Phillips
a5ead086f9 wayland: Update from scaler to viewporter protocol
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=767671
2016-09-15 12:10:59 -04:00
Sebastian Dröge
3f44aea2e1 configure: Depend on gstreamer 1.9.2.1 2016-09-14 11:30:54 +02:00
Víctor Manuel Jáquez Leal
fa4786a401 kmssink: update libdrm dependency to 2.4.55
The latest libdrm feature supported by kmssink is the universal plane, which
was added in 2.4.55. Let's update the dependency to that version.

https://bugzilla.gnome.org/show_bug.cgi?id=770146
2016-09-14 10:39:51 +02:00
Matthew Waters
f3b0b22c48 build/vulkan: fix winsys detection based on the previously set variables
The X11/Wayland winsys checks weren't being used to enable the vulkan element.
Use them.
2016-09-07 00:15:02 +10:00
Sebastian Dröge
42e1dcac00 Back to development 2016-09-01 12:28:22 +03:00
Sebastian Dröge
e19307edfe Release 1.9.2 2016-09-01 12:27:59 +03:00
Sebastian Dröge
807b0322c5 applemedia: Conditionally compile qtkitvideosrc
The API was deprecated in 10.9 and apparently does not exist in the SDK for
macOS Sierra anymore.

https://bugzilla.gnome.org/show_bug.cgi?id=770587
2016-08-31 10:03:15 +03:00
Josep Torra
0208168952 build: unconditionally check for video, audio and pbutils modules
Check for modules in configure and use GST_*_LIBS vars to link with
the libraries instead of hardcoding them.
2016-08-25 16:27:41 +02:00
Tim-Philipp Müller
c8321a3173 applemedia-nonpublic: remove bitrotten plugin that's no longer needed 2016-08-19 11:02:46 +01:00
Matthew Waters
c42eb9932e build: bump graphene requirement to 1.4 2016-08-19 17:11:13 +10:00
Matthew Waters
2b6841da32 gl/build: add configure check for possibly missing EGLAttrib
Fixes the build on older android targets.
2016-08-16 16:51:02 +10:00
Tim-Philipp Müller
31fffdad10 fdkaac: actually build and dist 2016-08-07 20:53:30 +01:00
Sebastian Dröge
24501c6358 fdkaac: Initial plugin skeleton 2016-08-07 15:31:09 +03:00
Vivia Nikolaidou
a2c6e2b64a timecodestamper: New element to attach SMPTE timecode to buffers
The timecodestamper element attaches a SMPTE timecode to each video buffer.
This timecode corresponds to the current stream time.

https://bugzilla.gnome.org/show_bug.cgi?id=766419
2016-08-04 19:08:27 +03:00
Matthew Waters
2ae16c2f68 gl/build: fix configure when --enable-cocoa is passed on OS X
https://bugzilla.gnome.org/show_bug.cgi?id=768553
2016-07-11 11:29:07 +10:00
Stefan Sauer
13d963fbf0 lv2: keep working with older versions
Provide a fallback impl. for the only new function we were using from 0.22.
Fixes #768595
2016-07-10 20:44:19 +02:00
Nicolas Dufresne
c57d4f3e5e configure.ac: Cleanup unused variable
We only check for a header, no need for overriding LDFLAGS.
2016-07-07 13:22:47 -04:00
Nicolas Dufresne
4d6a21926e webrtcdsp: Relax C++11 check
The library does not require any STL C++11 specific headers.
This fixes our OSX build as we target a SDK version that does not
support C++11 STL.
2016-07-07 12:31:20 -04:00
Nicolas Dufresne
928dcd93ef webrtcdsp: Add Android GNUSTL support 2016-07-07 12:31:03 -04:00
Nicolas Dufresne
17e8533064 webrtcdsp: Set USE_WEBRTCDSP when disabled 2016-07-07 12:27:24 -04:00
Sebastian Dröge
2aaeb061c4 webrtcdsp: Also allow webrtc-audio-processing 0.3
It seems to work and is the version available in Debian.
2016-07-06 14:29:47 +03:00
Sebastian Dröge
0122fec530 Back to development 2016-07-06 13:51:06 +03:00
Sebastian Dröge
e06dd97007 Release 1.9.1 2016-07-06 13:07:21 +03:00
Nicolas Dufresne
640100fdb6 configure.ac: Add missing double quotes
That affectation was ignored. This worked on recent GCC as C++11 is
enabled by default now.
2016-07-04 15:23:08 -04:00
Wim Taymans
6b511fdcd1 musepackdec: port to 1.0 2016-07-04 16:54:53 +02:00
Tim-Philipp Müller
013eaee06b qt: fix build some more when QPA is not available
Compiler would complain about include directory that didn't
exist because QPA_INCLUDE_PATH gets subst-ed regardless
(and if it didn't we'd have just an empty -I argument).

https://bugzilla.gnome.org/show_bug.cgi?id=767553
2016-07-01 19:29:49 +01:00
Haihua Hu
d60b071474 qmlglsink: Fix build error when don't have QPA installed.
Check header file existance and wrap the header file include
in the necessary #ifdef to avoid build error.

https://bugzilla.gnome.org/show_bug.cgi?id=767553
2016-06-27 22:44:56 +10:00
Nirbheek Chauhan
539c032345 configure: Need to add -DGST_STATIC_COMPILATION when building only statically
https://bugzilla.gnome.org/show_bug.cgi?id=767463
2016-06-24 01:15:11 +01:00
Nicolas Dufresne
398f7059fc webrtcdsp: Add WebRTC Audio Processing support
This DSP library can be used to enhance voice signal for real time
communication call. In implements multiple filters like noise reduction,
high pass filter, echo cancellation, automatic gain control, etc.

The webrtcdsp element can be used along, or with the help of the
webrtcechoprobe if echo cancellation is enabled. The echo probe should
be placed as close as possible to the audio sink, while the DSP is
generally place close to the audio capture. For local testing, one can
use an echo loop pipeline like the following:

  autoaudiosrc ! webrtcdsp ! webrtcechoprobe ! autoaudiosink

This pipeline should produce a single echo rather then repeated echo.
Those elements works if they are placed in the same top level pipeline.

https://bugzilla.gnome.org/show_bug.cgi?id=767800
2016-06-21 13:46:00 -04:00
Sergey Borovkov
180405714c qml: Enable qmlglsink for eglfs
https://bugzilla.gnome.org/show_bug.cgi?id=763044
2016-06-16 01:49:16 +10:00
Haihua Hu
3903406304 qmlglsink: Add Wayland support
Don't use gstgldisplay to get wayland display. Should use QPA on wayland
to get wayland display for QT.

https://bugzilla.gnome.org/show_bug.cgi?id=767553
2016-06-16 01:49:16 +10:00
Joan Pau Beltran
e28b123608 dc1394src: port to 1.X
The dc1394src is a PushSrc element for IIDC cameras based on libdc1394.
The implementation from the 0.x series is deffective:
caps negotiation does not work, and some video formats
provided by the camera are not supported.

Refactor the code to port it to 1.X and enhance the support
for the full set of video options of IIDC cameras:

  - The IIDC specification includes a set of camera video modes
    (video format, frame size, and frame rates).
    They do not map perfectly to Gstreamer formats, but those that
    do not match are very rare (if used at all by any camera).
    In addition, although the specification includes a raw format,
    some cameras use mono video formats to capture in Bayer format.
    Map corresponding video modes to Gstreamer formats in capabilities,
    allowing both gray raw and Bayer video formats for mono video modes.

  - The specification includes scalable video modes (Format7),
    where the frame size and rate can be set to arbitrary values
    (within the limits of the camera and the bus transport).
    Allow the use of such mode, using the frame size and rate
    from the negotiatied caps, and set the camera frame rate
    adjusting the packet size as in:
    <http://damien.douxchamps.net/ieee1394/libdc1394/faq/#How_do_I_set_the_frame_rate>

    The scalable modes also allow for a custom ROI offset.
    Support for it can be easily added later using properties.

  - Camera operation using libdc1394 is as follows:

      1. Enumerate cameras on the system and open the camera
         identified the enumeration index or by a GUID (64bit hex code).

      2. Query the video formats supported by the camera.

      3. Configure the camera for the desired video format.

      4. Setup the capture resources for the configured video format
         and start the camera transmission.

      5. Capture frames from the camera and release them when not used.

      6. Stop the camera transmission and clear the capture resources.

      7. Close the camera freeing its resources.

    Do steps 2 and 3 when getting and setting the caps respectively.
    Ideally 4 and 6 would be done when going from PAUSED to PLAYING
    and viceversa, but since caps might not be set yet, the video mode
    is not properly configured leaving the camera in a broken state.
    Hence, setup capture and start transmission in the set caps method,
    and consequently clear the capture and stop the transmission
    when going from PAUSED to READY (instead of PLAYING to PAUSED).
    Symmetrycally, open the camera when going from READY to PAUSED,
    allowing to probe the camera caps in the negotiation stage.
    Implement that using the `start` and `stop` methods of `GstBaseSrc`,
    instead of the `change-state` method of `GstElement`.
    Stop the camera before setting new caps and restarting it again
    to handle caps reconfiguration while in PLAYING (it has no effect
    if the camera is not started).

  - Create buffers copying the bytes of the captured frames.
    Alternatively, the buffers could just wrap the bytes of the frames,
    releasing the frame in the buffer's destroy notify function,
    if all buffers were destroyed before going from PLAYING to PAUSED.

  - No timestamp nor offset is set when creating buffers.
    Timestamping is delegated to the parent class BaseSrc,
    setting `gst_base_src_set_live` TRUE, `gst_base_src_set_format`
    with GST_FORMAT_TIME and `gst_base_src_set_do_timestamp`.
    Captured frames have a timestamp field with the system time
    at the completion of the transmission of the frame,
    but it is not sure that this comes from a monotonic clock,
    and it seems to be left NULL in Windows.

  - Use GUID and unit properties to select the camera to operate on.
    The camera number used in version 0.X does not uniquely identify
    the device (it depends on the set of cameras currently detected).
    Since the GUID is 64bit identifier (same as MAC address),
    handle it with a string property with its hexadecimal representation.
    For practicality, operate on the first camera available if the GUID
    is null (default) and match any camera unit number if unit is -1.
    Alternatively, the GUID could be handed with an unsigned 64 bit
    integer type property, using `0xffffffffffffffff` as default value
    to select the first camera available (it is not a valid GUID value).

  - Keep name `GstDc1394` and prefix `gst_dc1394` as in version 0.X,
    although `GstDC1394Src` and `gst_dc1394_src` are more descriptive.

  - Adjust build files to reenable the compilation of the plugin.

    Remove dc1394 from the list of unported plugins in configure.ac.

    Add the missing flags and libraries to Makefile.
    Use `$()` for variable substitution, as many plugins do,
    although other plugins use `@@` instead.

https://bugzilla.gnome.org/show_bug.cgi?id=763026
2016-06-09 21:47:58 +01:00
Alex-P. Natsios
a865f6545a configure: check for shm_open() in OpenBSD
In OpenBSD there is no "actual" librt that programs can link with,
instead the system/base libc provides the functions one would
customarily find there.

https://bugzilla.gnome.org/show_bug.cgi?id=766441
2016-05-14 17:10:27 +03:00
Nirbheek Chauhan
1536f30cc2 openjpeg: Port to 2.1 and require a pkg-config file for 2.0 and 2.1
The port was trivial, and according to the NEWS file nothing else has changed,
but it is possible that other API was changed without proper notification.

OpenJPEG upstream has shipped a pkg-config file for the past 4 years, and all
distros should be shipping it by now.

https://bugzilla.gnome.org/show_bug.cgi?id=766213
2016-05-10 14:03:33 +03:00
Matthew Waters
344e7db975 gl: fix gles3 header usage for older platforms
Some platforms provide an old version of GLES2/gl2.h and GLES2/gl2ext.h that
will fail when including GLES3/gl3.h due to missing typedef's.

Seen on the RPi.
2016-05-03 20:02:34 +10:00
Víctor Manuel Jáquez Leal
c419d17dbf kmssink: add dmabuf support
This patch will enable the import of dmabufs into a KMS buffer using
the PRIME kernel interface.

If the driver does not support prime import, the method is skipped.

It has been tested with a Freescale I.MX6 board.

https://bugzilla.gnome.org/show_bug.cgi?id=761059
2016-04-11 19:57:48 +02:00
Víctor Manuel Jáquez Leal
620e1d2fcd kmssink: add plugin and sink element
This is simple video sink that use libdrm/libkms API to render frames.

The element uses planes to render through drmModeSetPlane().

It has been tested in an Exynos4412 board and in a Freescale I.MX6 board.

https://bugzilla.gnome.org/show_bug.cgi?id=761059
2016-04-11 19:57:48 +02:00
Matthew Waters
65770c2af9 vulkan: add a wayland winsys implementation 2016-04-11 14:18:47 +10:00
Matthew Waters
8fe5b198be gl/examples: remove duplicated videooverlay example
filtervideooverlay proved the exact same example (only with a extra glfiltercube).
2016-03-31 20:53:18 +11:00
Matthew Waters
9e40dd7d40 gl: add support for building against GLES3 headers
with a fallback to GLES2 headers if available.
2016-03-31 20:53:18 +11:00
Vanessa Chipirras Navalon
b37c759e52 opencv: Ported to OpenCV version 3.1 OpenCV
configure.ac was changed to work with new versions of OpenCV 3.X.
A new include is added gstopencvutils.cpp because it contains
the previous. This keeps compatibility with 2.4.

https://bugzilla.gnome.org/show_bug.cgi?id=760473
2016-03-30 22:10:58 +01:00
Thibault Saunier
c32e74fd8a lv2: Port filters to GStreamer 1.0 and use lilv instead of slv2
Properly separate files as we will not have only one single base class
for all elements as we used to with 0.10, but the same way it is done
with ladspa, we subclass GstAudioFilter, GstBaseSource etc...

https://bugzilla.gnome.org/show_bug.cgi?id=678207
2016-03-27 19:28:00 +02:00
Sebastian Dröge
795f63659c Back to development 2016-03-24 13:33:12 +02:00
Sebastian Dröge
740d3507ea Release 1.8.0 2016-03-24 12:33:19 +02:00
Matthew Waters
dd42e1c467 gl/build: add GST_GL_HAVE_DMABUF to gstglconfig.h
it's exposed in public API so hiding it in an AC_DEFINE for config.h only
works when building libgstgl itself.  Attempting to use libgstgl (especially
on egl platforms) will throw a compilation error.
2016-03-22 23:29:51 +11:00
Sebastian Dröge
51047d6bdb Release 1.7.91 2016-03-15 12:13:17 +02:00
Sebastian Dröge
3ebfefd220 Release 1.7.90 2016-03-01 18:23:36 +02:00
Sebastian Dröge
acdbbb92d8 Back to development 2016-02-19 12:38:31 +02:00