Commit graph

449 commits

Author SHA1 Message Date
Thibault Saunier
2fb716409c Use the new API to post flow ERROR messages on the bus
https://bugzilla.gnome.org/show_bug.cgi?id=770158
2016-08-26 19:23:31 -03:00
Thibault Saunier
50473d77cc meson: Make mpegts lib build when using subprojects
The headers passed as parametter are relative to the build dir
basically "../subproject/gst-plugins-bad/gst-libs/gst/mpegts/XXX.h"
but that does not match what is needed at build time when building as
subproject, also we always add current dir as include_dir so we are
safe including directly.

And link mpegtsdemux against the 'math' library as it is needed.
2016-08-25 15:17:17 -03:00
Nirbheek Chauhan
42af2d66d8 Add support for Meson as alternative/parallel build system
https://github.com/mesonbuild/meson

With contributions from:

Tim-Philipp Müller <tim@centricular.com>
Matej Knopp <matej.knopp@gmail.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)

Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded

... and many more. For more details see:

http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.html
http://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html

Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
2016-08-20 11:35:54 +01:00
Edward Hervey
51c5ff45de tsdemux: Fix draining on wrong programs
When draining a program, we might send a newsegment event on the pads
that are going to be removed (and then the pending data).

In order to do that, calculate_and_push_newsegment() needs to know
what list of streams it should take into account (instead of blindly
using the current one).

All callers to calculate_and_push_newsegment() and push_pending_data()
can now specify the program on which to act (or NULL for the default
one).
2016-08-03 17:15:41 +02:00
Edward Hervey
e2b98a7721 tsdemux: Fix GAP synchronization without a valid PCR PID
For streams that don't have a valid PCR PID, we just use the latest
PTS from any given stream.

https://bugzilla.gnome.org/show_bug.cgi?id=608148
2016-08-03 17:15:41 +02:00
Michael Olbrich
36e6590335 tsdemux: handle pcr_pid == 0x1fff
Streams without PCR make senses in HLS, where the playlist timestamps
can be used to seek or calculate the duration.

https://bugzilla.gnome.org/show_bug.cgi?id=608148
2016-08-03 17:15:41 +02:00
Arnaud Vrac
7a3d189250 mpegtsdemux: do not abort playback when no PCR were found during initial scan
Seeking will not be possible in those streams but at least the can be
played. Note scanning is only done when tsdemux is configured in pull mode.

https://bugzilla.gnome.org/show_bug.cgi?id=608148
2016-08-03 17:15:41 +02:00
Arnaud Vrac
35a1720de1 mpegtsdemux: only wait for PCR when PCR pid is set
Streams without PCR make senses in HLS, where the playlist timestamps
can be used to seek or calculate the duration.

https://bugzilla.gnome.org/show_bug.cgi?id=608148
2016-08-03 17:15:40 +02:00
Michael Olbrich
48c5cc1b1b tsdemux: add support for LPCM with stream_type = 0x83
https://bugzilla.gnome.org/show_bug.cgi?id=765807
2016-07-25 13:38:29 +03:00
Jan Schmidt
e3f5ccb333 tsdemux: Change the pad naming scheme to include a generation ID
A simple fix for the problem of creating new pads with duplicate
names when switching program, easier than the alternative of
trying to work out which pads might persist and manage that.

See https://bugzilla.gnome.org/show_bug.cgi?id=758454
2016-06-06 13:05:34 +03:00
Damian Ziobro
abc1c4fc9a mpegtsbase: remove unused variables: upstream_live and queried_latency
https://bugzilla.gnome.org/show_bug.cgi?id=766343
2016-05-13 10:28:46 +03:00
Jan Schmidt
d6ea4d83f2 mpegtsbase: Fix when applying new PMT with same program number
When the sub-class is delaying deactivation of the old program,
but it has the same program number as the new program, don't
overwrite the old program in the hash table and then steal
the new program back out of it. Instead, add the new program to
the hash table after handling removal of the old one.
2016-04-12 14:09:47 +10:00
Thiago Santos
dbd12ec82b mpegtsbase: plug EIT string leak 2016-03-24 11:29:35 -03:00
Thiago Santos
f8cad7d755 mpegtspacketizer: simplify variable reset
Just set it directly to 0, instead of checking and reseting
2016-03-24 11:06:55 -03:00
Vineeth TM
8cdfb13658 bad: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763081
2016-03-24 14:56:51 +02:00
Tim-Philipp Müller
5ec337f8ae tsdemux: add video/x-h265 to template caps 2016-03-12 15:44:54 +00:00
Jan Schmidt
6de7f0c0fa mpegts: Don't leave freed programs in the hash table
When the sub-class claims a program for later freeing, make
sure it's not left in the hash table, or it can cause crashes on shutdown.

Make sure tsdemux frees any program it has kept around at shutdown
if it wasn't freed already.

https://bugzilla.gnome.org/show_bug.cgi?id=763503
2016-03-12 03:32:32 +11:00
Edward Hervey
215c9eb71a tsdemux: Don't reset/recalculate segments with accurate seeks
When dealing with accurate seeks, we must send out a segment which
is exactly what is requested.

https://bugzilla.gnome.org/show_bug.cgi?id=763262
2016-03-08 15:13:40 +01:00
Aurélien Zanelli
d87177b69b mpegtspacketizer: handle early PTS conversion when a group has been found
In some cases, the PTS might be smaller than the first observed PCR
value which causes element to apply wraparound leading to bogus
timestamp. To solve this, we only apply it if the PTS-PCR difference is
greater that 1 second to be sure that it's a real wraparound.

Moreover, using unsigned 32 bits values to handle wrapover could end up
with bogus value, so it use pts value to handle it.

Also, convert pcr time to gst time before comparing it to pts.
Since refpcr is expressed in PCR time base while pts is expressed in GStreamer
time.

https://bugzilla.gnome.org/show_bug.cgi?id=743259
2016-03-03 00:50:15 +11:00
Edward Hervey
ab31900b64 tsparse: Fix per-program-pad pushing
This fixes a couple of issues regarding the output of (request)
per-program pads output:

We would never push out PAT sections (ok, that was one reallly stupid
mistake. I guess nobody ever uses this feature ...).

In the case where the PMT section of a program was bigger than one
packet, we would only end up pushing the last packet of that PMT. Which
obviously results in the resulting stream never containing the proper
(complete) PMT.

The problem was that the program is only started (in the base class)
after the PMT section is completely parsed. When dealing with single-program
pads, tsparse only wants to push the PMT corresponding to the requested
program (and not the other ones). tsparse did that check by looking
at the streams of the program...
... but that program doesn't exist for the first packets of the initial
PMT.

The fix is to use the base class program information (if it parsed the
PAT it already has some information, like the PMT PID for a given program)
if the program hasn't started yet.
2016-02-19 18:12:59 +01:00
Edward Hervey
00a1879d65 tsparse: Use GstFlowCombiner
In addition to the fact that it's a sane thing to do for multi-source
pad elements, it also avoids the situation where just using a request
pad (and not the main static pad) would result in the processing
stopping.
2016-02-19 18:04:23 +01:00
Vineeth TM
ee8a5455d0 mpegtsbase: Refactor code to check for subclass seek handling
If subclass is not able to handle seek event, then there is no need to
stop streaming and send flush events. We should simply return FALSE

https://bugzilla.gnome.org/show_bug.cgi?id=758516
2016-02-17 10:51:07 +02:00
Vineeth TM
6676ed6cb0 mpegtsbase: Add condition to check for non working negative rate
tsdemux is not able to handle negative playback rates.
But in mpegtsbase, the same check is not being done.
added a check to not handle negative rate while seeking unless
the same is handled upstream.

https://bugzilla.gnome.org/show_bug.cgi?id=758516
2016-02-17 10:51:07 +02:00
Edward Hervey
a21c2618c5 tsdemux: Expose DVB Subpicture as subpictures
For some reason we were considering them as private data.
2015-12-02 14:15:04 +01:00
Edward Hervey
531117b7df tsdemux: Push GAP events *after* deactivating old programs
The order in which program switch must happen is:
1) drain all data on old pads (but don't push EOS)
2) add new pads (but don't push any data on them)
3) Push EOS and remove old pads
4) Start pushing data on new pads

There was one caveat in this implementation, which is that when
we activate a sparse pad (step 2) we would push a GAP event. The problem
is that, while being an event, it is actually *data*.

We therefore need to make sure pushing those GAP event is done at the step
we start pushing data.

https://bugzilla.gnome.org/show_bug.cgi?id=750402
2015-12-02 14:15:04 +01:00
Edward Hervey
7336294635 tsdemux: Make sure old streams are drained before switching
Before we add any streams, make sure we drain all streams. This ensures
there's consistency that only "new" data will be pushed on buffers once
the new pads are added

https://bugzilla.gnome.org/show_bug.cgi?id=750402
2015-12-02 14:15:04 +01:00
Edward Hervey
14e6d2d427 mpegtsdemux: Allow deactivation of programs to be delayed
When changing programs, the order of events needs to be the following:
* add pads from new program
* send EOS on old pads
* remove old pads
* emit 'no-more-pads'

Previously tsdemux was not doing that, and was first deactivating and
removing old pads before adding new ones.

We fix this by allowing subclasses of mpegtsbase to be able to handle
themselves the deactivation of programs. In this case tsdemux will
properly deactivate it once it has activated the new program.

https://bugzilla.gnome.org/show_bug.cgi?id=750402
2015-12-02 14:15:04 +01:00
Reynaldo H. Verdejo Pinochet
86ec812429 Remove unnecessary NULL checks before g_free()
g_free() is NULL-safe
2015-11-18 16:05:42 -08:00
Nicolas Huet
d65d8657e6 mpegtsdemux: fix section_data leak
If packet->payload_unit_start_indicator is true and pointer 0, there is no
discontinuity check. Therefore there could be a previous section not complete
that need to be cleared.

https://bugzilla.gnome.org/show_bug.cgi?id=758010
2015-11-13 09:37:53 +01:00
Luis de Bethencourt
fc23467152 tsdemux: remove memory leak
The values of channel_mapping are copied by gst_codec_utils_opus_create_caps ()
but it doesn't free or take ownership of the g_new0 allocated memory. This
needs to be freed before going out of scope.

CID 1338692
2015-11-12 12:08:15 +00:00
Nicolas Huet
21a025c2a1 tsdemux: fix pending buffers leak when flushing
https://bugzilla.gnome.org/show_bug.cgi?id=757895
2015-11-11 15:35:54 +01:00
Etienne Peron
a336181ef5 tsdemux: Fix pad leak when the pad is never exposed
If tsdemux never receives data for a stream, the corresponding pad will never
be added and stream->active will remain FALSE. When the stream is removed, the
pad will not be unreffed and will be leaked.

https://bugzilla.gnome.org/show_bug.cgi?id=757873
2015-11-11 15:32:30 +01:00
Matthew Waters
ac9a2971bd tsdemux: provide our own definition of log2()
The log2 function/macro doesn't exist when targetting android API < 18 (or MSVC
< 2013) whereas our current baseline is API 9.
2015-11-11 18:57:55 +11:00
Tim-Philipp Müller
edab4deb3a glshader, tsdemux: simplify code
Jus use _delete_link() instead of _remove_link() + _free1()
2015-11-06 13:00:55 +00:00
Sebastian Dröge
ee2e082a27 tsdemux: Don't create an incomplete OpusHead but set all the other caps fields instead
OpusHead is optional, the other fields are not.

https://bugzilla.gnome.org/show_bug.cgi?id=757152
2015-11-03 20:35:41 +02:00
Sebastian Dröge
2609c394d7 tsmux: Simplify Opus caps parsing by using codecutils helpers
https://bugzilla.gnome.org/show_bug.cgi?id=757152
2015-11-03 20:35:41 +02:00
Sebastian Dröge
ecf7c7742c tsdemux/mux: Add support for GstAudioClippingMeta for Opus
https://bugzilla.gnome.org/show_bug.cgi?id=757153
2015-11-03 20:35:41 +02:00
Sebastian Dröge
1e785a3778 tsdemux: Add support for Opus
Code partially based on
  https://git.videolan.org/?p=ffmpeg.git;a=commit;h=74141f693ded2fbf75af56fff309d2db35183635
and based on the spec draft at
  https://wiki.xiph.org/OpusTS

Makes it possible to demux
  http://www.obe.tv/Downloads/opus.ts

https://bugzilla.gnome.org/show_bug.cgi?id=757049
2015-11-03 20:35:41 +02:00
Tim-Philipp Müller
54fc1ed5f4 tsdemux: fix latency handling again
The tsdemux latency should always be added to the minimum
latency (which is always a valid clock time value). The
"cleanup" in commit a1f709c2 made it so that it would not
be added if upstream reported 0 as minimum latency (as
e.g. udpsrc would). This broke playback of live mpeg-ts
streaming in some cases, leading to playback stutter due
to a too-small configured latency for the pipeline.

https://bugzilla.gnome.org/show_bug.cgi?id=751508
2015-08-24 10:46:31 +01:00
Edward Hervey
7ea4a66b9f mpegtsdemux: Fix illogical comparision
A variable can't be two values at once. We want to stop if it's not the
actual ts *AND* not the other ts

CID #1316475
2015-08-16 12:56:56 +02:00
Luis de Bethencourt
7ddaf8741b mpegtsbase: remove redundant check
No need to check if done is True since break will already terminate the for
loop.
2015-07-29 16:52:08 +01:00
Edward Hervey
631b2d8826 mpegtsbase: Fix previous commit
We only want to do a hard reset of the observations if we're working
with TIME segments in push mode. For BYTE segment we want to keep
the observations (in order to do seeks in push-mode).
2015-07-09 18:33:00 +02:00
Edward Hervey
0247dc7489 mpegtsbase: Flush more on DISCONT buffers in push mode
When in push mode, we want to discard all previous observations from the
mpegtspacketizer when we get a DISCONT buffer.

This avoids trying to calculate bogus timestamps (estimating them using old
PCR observations).

We only do a hard reset in push-mode. In pull-mode we still need the observations
(in order to seek properly)
2015-07-09 18:15:54 +02:00
Tim-Philipp Müller
f0358aac16 tsdemux: remove unnecessary check
This is not public API, use g_assert() instead of
g_return_if_fail(), so that it's compiled out in
releases. It's only called from our code, with &foo.
2015-07-08 14:50:00 +01:00
Tim-Philipp Müller
eeaf4d11b7 tsdemux: add support for KLV metadata streams
There's no timestamps for these streams though, we
might want to make some up based on the last/next
video PTS or so.
2015-07-08 14:50:00 +01:00
Nicolas Dufresne
338f7e8c8d tsdemux: Segment start should match first PTS
The segment should start at first PTS, and the vairable name lower_pts
state so correctly. Though we where using the first DTS instead. This
could lead to small desynchronization of video stream.

https://bugzilla.gnome.org/show_bug.cgi?id=740575
2015-06-12 17:10:29 -04:00
Luis de Bethencourt
afcb49dcce tsdemux: correct fix for dead code
Rename template to caps to keep the original intention of the code after
commit b4c9aa1c

CID #1304674
2015-06-08 14:19:27 +01:00
Luis de Bethencourt
e9cb38017b Revert "tsdemux: remove dead code"
This reverts commit 0635acfec0.
2015-06-08 14:14:41 +01:00
Luis de Bethencourt
0635acfec0 tsdemux: remove dead code
After commit b4c9aa1c30 template will always be
NULL. The if conditional will always be FALSE, so removing it.

CID #1304674
2015-06-08 13:37:35 +01:00
Luis de Bethencourt
7aed8e184f tsdemux: remove ignored assignment
Function goes to done before the value set in start_offset is ever used.
2015-06-05 14:34:59 +01:00