Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_preroll),
(gst_base_sink_flush_start), (gst_base_sink_flush_stop),
(gst_base_sink_event), (gst_base_sink_perform_seek),
(gst_base_sink_loop), (gst_base_sink_pad_activate_pull),
(gst_base_sink_send_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add method to commit the state in subclasses.
Refactor the flush_start and flush_stop code because we need it for
flushing while seeking too.
Implement the beginnings of seeking in pull mode.
Use the segment last_stop field for the pulling offset.
Fix the pause method in pull mode.
Configure the segment to BYTES for pull mode.
API: GstBaseSink::gst_base_sink_do_preroll()
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_handle_buffer):
Fix flow aggregation of tee. Error out immediately for all flow returns
except OK and NOT_LINKED, return NOT_LINKED if all pads are not linked
and return OK if at least one pad is linked.
Before we errored out on "fatal" flow returns (i.e. not for WRONG_STATE)
and otherwise returned the flow return of the last pad, which is wrong.
* tests/check/elements/tee.c: (_fake_chain), (_fake_chain_error),
(GST_START_TEST), (tee_suite):
Add unit tests for the flow aggregation.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Remove item from the todo list because it was fixed with the latency
state change rewrites.
* docs/design/part-seeking.txt:
* docs/design/part-segments.txt:
Update some docs.
* gst/gstevent.c: (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_new_seek),
(gst_event_parse_seek), (gst_event_new_latency),
(gst_event_parse_latency):
Use quarks to construct and parse events.
* gst/gstquark.c: (_priv_gst_quarks_initialize):
* gst/gstquark.h:
Add some more quarks to the table.
Emit a warning when the quark tables are not in sync.
* tests/check/gst/gstbus.c: (GST_START_TEST):
Add an assert.
Original commit message from CVS:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
Don't install static libs for plugins. Fixes#550851 for core.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_source_finalize),
(gst_bus_add_watch_full_unlocked), (gst_bus_add_watch_full),
(gst_bus_enable_sync_message_emission),
(gst_bus_disable_sync_message_emission),
(gst_bus_add_signal_watch_full), (gst_bus_remove_signal_watch):
Fix deadlock, g_source_get_id() cannot be called in finalize.
Keep track of the watch source by keeping a pointer to the source object
instead.
Use the bus lock to protect access to the pointer to the current
watch source.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbus.c: (gst_bus_source_finalize),
(gst_bus_add_watch_full), (gst_bus_add_signal_watch_full):
Only allow one bus watch to be set at a time. This is necessary
because the dispatcher pops the message from the bus and the second
watcher will then get NULL or the next message (and the first won't
get this next message then, etc). If more than one "watcher" is
required signal watches should be used. Fixes bug #526044.
Original commit message from CVS:
* tools/gst-launch.c:
Change the printing of the 'buffering...' output to avoid putting
a \r in a translateable string (flagged by the TP).
Original commit message from CVS:
* gst/gstxml.c:
Clarify that the save_thyself() and restore_thyself() virtual
functions of GstObject need to be overriden, not
gst_object_(save|restore)_thyself() which is impossible.
Fixes bug #555700.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_range), (gst_pad_pull_range):
Revert a patch from 21 months ago that broke caps negotiation in pull
mode. Basically, having a buffer pass over a pad will trigger the
setcaps function when caps change, just like in push mode.
Original commit message from CVS:
* docs/design/part-negotiation.txt:
Update the docs some more.
* libs/gst/base/gsttypefindhelper.c: (helper_find_peek):
If we pull a buffer with non-trivial caps, suggest those caps with the
max probability.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func), (update_degree),
(gst_bin_handle_message_func):
The message src can be NULL, don't try to print the object names in that
case.
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate):
Add some more debug info.
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST):
Add some debug.
Fix the test, pull based sinks go ASYNC to PAUSED, just like other
scheduling modes.
Original commit message from CVS:
* docs/design/part-negotiation.txt:
Small doc update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_pad_getcaps), (gst_base_sink_pad_setcaps),
(gst_base_sink_init), (gst_base_sink_set_blocksize),
(gst_base_sink_get_blocksize), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_needs_preroll),
(gst_base_sink_loop), (gst_base_sink_pad_activate),
(gst_base_sink_negotiate_pull), (gst_base_sink_pad_activate_pull),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add blocksize property and methods to control the amount of data
to pull.
Negotiate first before activating upstream in pull mode so that they can
negotiate themselves.
When we operate in pull mode, we only accept the caps that we
negotiated.
Make the sink go ASYNC to PAUSED, like all other sinks.
API: GstBaseSink::gst_base_sink_set_blocksize()
API: GstBaseSink::gst_base_sink_get_blocksize()
API: GstBaseSink::blocksize
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_set_live), (gst_base_src_is_live),
(gst_base_src_set_format), (gst_base_src_query_latency),
(gst_base_src_set_blocksize), (gst_base_src_get_blocksize),
(gst_base_src_set_do_timestamp), (gst_base_src_get_do_timestamp),
(gst_base_src_set_property), (gst_base_src_get_property):
* libs/gst/base/gstbasesrc.h:
Add typechecking in public API functions.
Add methods to control the blocksize in subclasses.
API: GstBaseSrc::gst_base_src_set_blocksize()
API: GstBaseSrc::gst_base_src_get_blocksize()
Original commit message from CVS:
* tests/check/gst/gstutils.c: (probe_do_nothing), (data_probe),
(buffer_probe), (event_probe), (GST_START_TEST):
We now see 3 events go through our pad, since basesink now sends
upstream latency events.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_send_event):
Forward LATENCY events upstreams so that elements know about the total
pipeline latency. Fixes#555307.
Original commit message from CVS:
* plugins/elements/gstqueue.c:
Allow through queries when we don't know how
to adjust them (not TIME or BYTES), as otherwise it's
not possible to query the current position in order
to seek in other formats at all.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/gstghostpad.h (GST_GHOST_PAD_CAST):
* gst/gstghostpad.c (GST_GHOST_PAD_CAST): Fix unintended API
removal: re-add GST_GHOST_PAD_CAST to the header.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/gstghostpad.h (GstProxyPad, GstProxyPadClass, GstGhostPad)
(GstGhostPadClass): Publically expose these structures so as to
allow easy subclassing from C. Hide the member data behind a
private opaque data pointer.
* gst/gstghostpad.c: Adapt to store instance data in the type
instance's private data region, not in the public struct.
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_write_cache):
If we can't get a cache file don't try to save something to it.
Dereferencing NULL pointers usually isn't a good idea.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_sparc.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_sparc.h:
Add Sparc ABI checks
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Cast signed integer to unsigned to avoid a compiler warning.
Original commit message from CVS:
* libs/gst/base/gstbytereader.c: (gst_byte_reader_get_uint24_le),
(gst_byte_reader_get_uint24_be), (gst_byte_reader_get_int24_le),
(gst_byte_reader_get_int24_be), (gst_byte_reader_peek_uint24_le),
(gst_byte_reader_peek_uint24_be), (gst_byte_reader_peek_int24_le),
(gst_byte_reader_peek_int24_be):
Use new GST_READ_UINT24_(LE|BE) macros.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstutils.h:
Always use the unaligned variants of GST_READ_UINT* and GST_WRITE_UINT*
as it's too easy to break the ISO C strict aliasing rules with simple
casts to the corresponding type and this would introduce hard to debug
bugs. Fixes bug #545714.
API: Add GST_READ_UINT24_(LE|BE) and GST_WRITE_UINT24_(LE|BE).
Original commit message from CVS:
* gst/gstbuffer.h: (GST_BUFFER_FREE_FUNC):
* gst/gstghostpad.c: (gst_ghost_pad_construct):
Add 'Since' bits to gtk-doc chunks for new API.
Original commit message from CVS:
2008-10-06 Andy Wingo <wingo@pobox.com>
* gst/gstghostpad.h:
* gst/gstghostpad.c (gst_ghost_pad_construct): New function,
finishes the initialization of ghost pad. Useful for language
bindings and subclassers of GstGhostPad. Fixes#539108.
(gst_ghost_pad_new_full): Use the new constructor.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (update_degree),
(gst_bin_sort_iterator_new), (gst_bin_handle_message_func):
Keep track of pads that are being linked/unlinked and resync the state
changes.
* gst/gstpad.c: (gst_pad_get_direction),
(gst_pad_set_chain_function), (gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_unlink),
(gst_pad_link_prepare), (gst_pad_link),
(gst_pad_event_default_dispatch), (gst_pad_chain), (gst_pad_push),
(gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
Some code cleanups, use macros to check pad direction.
Don't need to take the lock on the pad direction.
Post structure change when pads are linked/unlinked.
Change some checks into _return_if_fail().
* tests/check/gst/gstbin.c:
(test_link_structure_change_state_changed_sync_cb),
(GST_START_TEST), (gst_bin_suite):
Add testcase for pad link/unlinke resync during a state change.
Fixes#510354.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstmessage.c: (gst_message_new_structure_change),
(gst_message_parse_structure_change):
* gst/gstmessage.h:
Implement STRUCTURE_CHANGED messages. These messages will be used to
signal the parent bin of link/unlink operations that could require a
resync when doing a state change. See ##510354.
API: gst_message_new_structure_change()
API: gst_message_parse_structure_change()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Improve position reporting while flushing and other intermediate state
changes. Fixes#553874.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked):
Original patch by : Simon Descaries
Fix small refount leak in caps compatibility check.
Fixes#551676.
Original commit message from CVS:
* docs/pwg/advanced-request.xml:
Fix 0.8 api usage in example. Fixes#554561
* docs/pwg/appendix-porting.xml:
Change 0.9 to 0.10 here.
Original commit message from CVS:
* docs/manual/basics-data.xml:
Change "event-event interaction" to "element-element interaction".
Fixes#552448. Also fix sample code for seeking and do more 0.8->0.10
updates.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
* plugins/elements/gstcapsfilter.c:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/capsfilter.c:
Fix assertion in basetransform when the subclass chooses not to
allocate a buffer in prepare_buffer(), and make capsfilter error out
cleanly if requested to apply caps that don't completely specify the
buffer. Fixes#551509
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer):
Take new caps ref because our old one might have been gone when the
subclass performs a gst_pad_set_caps() on the srcpad. See #548764.
Original commit message from CVS:
* configure.ac:
Do not probe availability of check unit test library when cross
compiling, as test would not work anyway. Also cleanup verbose output
of the check test. Fixes#551952.
Original commit message from CVS:
Based on patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gstelement.c: (gst_element_sync_state_with_parent):
Avoid leaking the parent ref when we fail changing the state of the
element using gst_element_sync_state_with_parent(). Fixes#551978.
Original commit message from CVS:
* gst/gstpad.c: (add_unref_pad_to_list),
(gst_pad_get_internal_links_default):
Add fallback when calling the deprecated function on an element that
implements the new internal_link handler.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsttaglist.c:
* gst/gsttaglist.h:
Add new tags for geo location and clarify purpose of existing location
tag. Fixes#481169
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* docs/gst/gstreamer-sections.txt:
* win32/common/libgstreamer.def:
* gst/gstpad.c: (gst_pad_init),
(gst_pad_set_iterate_internal_links_function),
(int_link_iter_data_free), (iterate_pad),
(gst_pad_iterate_internal_links_default),
(gst_pad_iterate_internal_links), (gst_pad_get_internal_links):
* gst/gstpad.h:
Add threadsafe replacement functions for getting internal links of an
element. Deprecate the old internal links functions.
API:GstPad::gst_pad_set_iterate_internal_links_function()
API:GstPad::GstPadIterIntLinkFunction
API:GstPad::gst_pad_iterate_internal_links()
API:GstPad::gst_pad_iterate_internal_links_default()
* gst/gstghostpad.c: (gst_proxy_pad_do_iterate_internal_links),
(gst_proxy_pad_init):
Implement threadsafe internal links.
* tests/check/elements/tee.c: (GST_START_TEST), (tee_suite):
Unit test for internal links on tee. See #549504.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_get_compatible_pad):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstpad.c: (name_is_valid), (GST_START_TEST):
Fix all leaks due to the bug in gst_pad_template_new() by which it does
not steal the refcount of the given caps as stated.
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
Original commit message from CVS:
* gst/gstiterator.c:
* gst/gstiterator.h:
After 3 years it's about time to revise the documentation of the
iterator objects.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default):
Make the internal links function less thread-unsafe and add some
comments, dunno why.
Original commit message from CVS:
* gst/gst_private.h:
Include gstinfo.h even if GST_DISABLE_GST_DEBUG is defined. Fixes
build with --disable-gst-debug.
Original commit message from CVS:
* gst/gstpadtemplate.c: Revert last change, since it breaks
a few plugins, ffmpeg, alaw, and mulaw. Code is correct,
but shouldn't be enabled until we've released fixed versions
of -good and -ffmpeg.
Original commit message from CVS:
* gst/gstpadtemplate.c:
The old behaviour was that gst_pad_template_new() takes ownership of
the caps. As we now call g_object_new() which calls g_object_set() and
which copies the caps, we have to unref them to not leak them. Fixes
make valgrid for me.
Original commit message from CVS:
* gst/gstobject.c:
Due to popular request also include ObjectType in
gst_object_get_path_string(). Makes gst-launch -v bit more useful.
Original commit message from CVS:
* gst/gstutils.c: Remove check in gst_pad_query_convert() that
src_val must be positive, because that's not a requirement.
This causes problems with converting negative granulepos
values for Dirac.
* gst/gstquery.c: Same, gst_query_new_convert().
Original commit message from CVS:
* gst/gstutils.c: Remove check in gst_pad_query_convert() that
src_val must be positive, because that's not a requirement.
This causes problems with converting negative granulepos
values for Dirac.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_add_observation):
Add some more debugging to the clock slaving code.
* win32/common/libgstbase.def:
Add new basetransform method.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
Take the (recursive) state lock between getting the locked state of an
element and changing the element state. This allows the application to
lock an element's state and then change its state without races.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
When an element is in the locked state we still want to update the
base_time of the element.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Use the result from gst_pad_set_caps() instead of assuming the element
always accepted the caps computed by the default negotiate function.
Original commit message from CVS:
patch by: Murray Cumming <murrayc@murrayc.com>
* gst/gstutils.c:
Mention that this is just like gst_buffer_merge() but with extra
unreffing for C coders. Advise language bindings not to wrap it.
Fixes Bug #533856.
Also fix file comment.
Original commit message from CVS:
reviewed by: Wim Taymans <wim.taymans@collabora.co.uk>
* plugins/elements/gstfakesink.c:
* plugins/elements/gstfakesrc.c:
Call super::event() when not handling it. Fixes#544855.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro@nnva.org>
* plugins/elements/gstfilesrc.c:
Use 64 bit variants of stat functions on win32, to enable support
of large files there.
Fixes#547277.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_chain_unlocked),
(gst_base_sink_negotiate_pull), (gst_base_sink_pad_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Improve position reporting in the flushing state.
Also report the position when we are not yet prerolled but we
have a newsegment event. Fixes#543444.
Improve the pull-based negotiation code.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Add testcase for position reporting while flushing in PAUSED and
PLAYING.
* tests/check/generic/sinks.c: (GST_START_TEST):
Update unit-test, we can now query the position as soon as we receive a
NEWSEGMENT event.
Original commit message from CVS:
Based on patch by: Jason Zhao <e3423c at motorola dot com>
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object):
When the subclass event handler releases the PREROLL_LOCK, we could be
in the flushing state and we have to ignore the event. Fixes#548394.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer):
If the element is configured in passthrough mode but the
prepare_output_buffer gave us a new output buffer, discard that buffer
and reuse the input buffer.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas at tandberg com>
* plugins/elements/gsttee.c: (gst_tee_finalize), (gst_tee_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_find_buffer_alloc), (gst_tee_buffer_alloc):
* plugins/elements/gsttee.h:
Protect pad_alloc with a new lock so that we can be sure that nothing is
performing a pad_alloc when removing the pad. Fixes#547835.
* tests/check/elements/tee.c: (buffer_alloc_harness_setup),
(buffer_alloc_harness_teardown), (app_thread_func),
(final_sinkpad_bufferalloc), (GST_START_TEST), (tee_suite):
Added testcase for shutdown race.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc):
Go over the buffer_alloc function again and make sure we always end up
allocating a buffer.
Add some more docs.
Avoid doing pad alloc when we have a pending suggestion because we
cannot yet deal with changing caps in that case. Fixes#547728
Original commit message from CVS:
patch by: Luc Pionchon <luc.pionchon@nokia.com>
* docs/manual/advanced-clocks.xml:
* docs/manual/clocks.png:
* docs/manual/diagrams-clocks.svg:
Add one more image showing different times together with a describing
paragraph. Fixes#547729.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc), (gst_base_transform_suggest):
Don't overwrite the outsize when calculating the expected size of a new
buffer because we still need it in case we cannot process the new
buffer.
When converting the size of the new buffer to an upstream size, actually
use the expected size of the buffer, not some other random value.
Use an atomic int to signal that a new upstream caps suggestion is
available.
When we can convert the current buffer to a new format, check if the
buffer size is of the expected size and allocate a new buffer of the
expected size when this is not the case.
* tests/check/libs/transform1.c: (GST_START_TEST):
remove ifdeffed code from the unit test.
Original commit message from CVS:
* pkgconfig/gstreamer-uninstalled.pc.in:
* pkgconfig/gstreamer.pc.in:
Remove -lgstcontrol-0.10 which never worked anyway as the lib is
called gstcontroller-0.10.
Original commit message from CVS:
* gst/gstregistrybinary.c:
Don't use g_mkstmp() on win32, it's unsafe if glib is using a different
libc.
Fixes#544776.
Original commit message from CVS:
* docs/manual/advanced-interfaces.xml:
Turn thoughts about HAL into a note-tag. Remove mentioning that is
only used to discover devices.
Original commit message from CVS:
Patch by: Frederic Crozat <fcrozat@mandriva.org>
* gst/gst.c: (init_pre):
Make sure gettext returns translations in UTF-8 encoding rather
than in the current locale encoding (#546822).
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_structure_is_subset_field):
Fix subset test.
* tests/check/gst/gstcaps.c: (GST_START_TEST):
Improve unit test subset tests and add a testcase for the subset failure
cases.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Improve subtraction unit test.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/gststructure.c:
(gst_structure_fixate_field_nearest_fraction):
Avoid overflows in fixation code when dealing with MAXINT values, which
v4l2src seems to do.
Fixes#546328.
* tests/check/gst/gststructure.c: (GST_START_TEST):
Make a unit test to check the fix.
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (copy_func),
(gst_capsfilter_set_property):
Use new caps suggestion feature of basetransform to request a caps
negotiation upstream.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_handle_async_done),
(gst_bin_handle_message_func):
Fix race for bins that simulate ASYNC state changes by inserting
ASYNC_START and ASYNC_DONE messages in their bus. We need to check for
pending ASYNC messages even when the bin does not have ASYNC children.
We note detect this behaviour because we will receive an ASYNC message
that is originating from the bin itself.
Fixes races with decodebin2 state changes.
* tests/check/gst/gstbin.c: (GST_START_TEST):
Add some more debug.
Original commit message from CVS:
* gst/gsttaglist.c:
Argh. actually save the text before committing. Now adds
gst_tag_merge_strings_with_comma() to gst_tag_register().
Original commit message from CVS:
* gst/gsttaglist.c:
* gst/gsttaglist.h:
Do as tim pointed out and actually register the new tag. Also improve
te docs and use gst_tag_merge_strings_with_comma() method to allow
retriving all keywords merged in one list.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer.types:
Revert 'accidential' change of the configure option removal. We still
need to generate the types file in configure --disable-load-save.
Original commit message from CVS:
* gst/gstpadtemplate.c:
(gst_pad_template_class_init), (gst_static_pad_template_get),
(gst_pad_template_new), (gst_pad_template_pad_created),
(gst_pad_template_set_property), (gst_pad_template_get_property):
Add "name-template", "direction", "presence" and "caps" properties,
so that gst_pad_template_new() is just a thin wrapper around
g_object_new(), which is better for bindings. (Fixes: #539772)
Original commit message from CVS:
* gst/gsturi.c:
Be more liberal in what URIs we accept.
Do not unescape bits of the URI for no apparent reason before passing to
the element. Fixes#545352.
Original commit message from CVS:
Patch by: Robert Schwebel <r.schwebel@pengutronix.de>
* gst/gst.c:
Include gstconfig.h as macros from it are used. Fixes bug #545607.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* docs/gst/gstreamer.types:
* docs/gst/gstreamer.types.in:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_set_index_func):
* gst/gstconfig.h.in:
* gst/gstelement.c: (gst_element_get_index):
* gst/gstregistrybinary.c: (gst_registry_binary_save_feature),
(gst_registry_binary_load_feature),
(gst_registry_binary_read_cache):
* gst/gstregistryxml.c: (load_feature),
(gst_registry_xml_read_cache), (gst_registry_xml_save_feature):
* plugins/Makefile.am:
* tools/gst-indent:
* tools/gst-inspect.c: (print_index_info), (print_element_list),
(print_plugin_features), (print_element_features):
* tools/gst-xmlinspect.c: (print_event_masks),
(print_element_info):
* win32/common/gstconfig.h:
Remove GST_DISABLE_(ENUMTYPES|INDEX|URI) everywhere.
Disabling the indexers and URI handler code will only reduce the
required amount of memory by a very small amount but on the other hand
requires much more maintaince work. Apart from that many places of
code are broken when disabling them.
Disabling the enum types doesn't reduce the required amount of memory
by more than a few bytes and makes it hard to fix bugs like #539772,
i.e. use the enums as GObject properties.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_acceptcaps_default),
(gst_pad_configure_src), (gst_pad_alloc_buffer_full):
Remove silly redundant debug.
Add some more debug info.
Clarify the docs regarding new caps received from pad_alloc.
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_set_property),
(gst_capsfilter_get_property), (gst_capsfilter_transform_caps):
Make setting the caps more threadsafe.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_acceptcaps):
Add and use a custom acceptcaps function instead of falling back to the
potentially less optimized default implementation.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full):
Only sanity-check the buffer size if requested_caps == buffer_caps
(ie. don't take pad caps into account, they're not relevant here)
Original commit message from CVS:
* plugins/elements/gsttee.c:
* plugins/elements/gsttee.h:
Reverting as not everything is clear yet. Needs some general design
work.
Original commit message from CVS:
* docs/manual/advanced-autoplugging.xml: Add fakesink to example
code to close the pipeline graph. This prevents the program from
printing internal data flow errors.
Original commit message from CVS:
* configure.ac:
Remove AC_ISC_POSIX macro; it's broken on some platforms and not needed.
Add check (taken from -base) for winsock, adds WIN32_LIBS
* gst/Makefile.am:
Add WIN32_LIBS to LIBADD for libgstreamer. Needed now that gstpoll uses
winsock.
Define GST_EXPORTS when building libgstreamer (only used on win32)
* gst/gst_private.h:
* gst/gstinfo.h:
Use GST_EXPORT instead of locally-defined (and incorrect IMPORT_SYMBOL)
for symbols that we need to export in both these files.
* gst/gstpoll.c:
Include gst_private.h higher up to avoid some compile problems on win32.
Original commit message from CVS:
* gst/gstcaps.c:
Previous commit was wrong NULL caps does not exist
and indicate an error, so also add a FIXME to
gst_caps_is_equal where NULL caps are accepted.
Original commit message from CVS:
* gst/gstplugin.c:
* gst/gstregistry.c:
GstRegistryPool doesn't exist; don't refer to it in docs.
Don't refer to functions that don't exist in docs, it's
unhelpful.
Original commit message from CVS:
Patch by: tmatth <le dot businessman at gmail dot com>
* docs/pwg/building-testapp.xml:
Don't use an undeclared variable in the example program.
Fixes bug #542573.
Original commit message from CVS:
* libs/gst/controller/gstinterpolationcontrolsource.c:
(_list_find_sorted_custom):
Don't use declarations after statements.
Original commit message from CVS:
* gst/gstchildproxy.c: (gst_child_proxy_base_init):
Add FIXMEs for 0.11 to use GST_TYPE_OBJECT in the signature
of the the child-added / -removed signals as GstChildProxy
only supports GstObjects.
Original commit message from CVS:
* gst/gstplugin.c: (CHECK_PLUGIN_DESC_FIELD), (gst_plugin_load_file):
Print error debug message if plugin description fields that should
be set are NULL.
* gst/gstregistrybinary.c: (gst_registry_binary_save_const_string):
Don't crash if the string to serialise is NULL (it really should
not be, but apparently this used to work with the xml registry ...).
Original commit message from CVS:
* gst/gstevent.c:
Use gst_format_get_name() to improve debug output.
* gst/gstpreset.c:
Remove #ifdef'ed code. Add TODO comment.
* gst/gstsegment.c:
Add debug output to ease spotting format != segment.format assertions.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
Don't write to the same region of memory as a uint64 and uint16
as this breaks strict aliasing rules and apparantly breaks on PPC
and s390. Thanks to Sjoerd Simons for analysing. Fixes bug #348114.
Original commit message from CVS:
* libs/gst/controller/gstinterpolationcontrolsource.c:
Optimize list handling. Use own find function. Exploit that fact that
the list is sorted. Also pass back the node before, so that we can
insert quickly. Have a fast path for append.
Original commit message from CVS:
* configure.ac:
Show configuration sumary after configure run. Based on patch by
Luc Pionchon <luc.pionchon@nokia.com>. Fixes: #540134
Original commit message from CVS:
patch by: Luc Pionchon <luc.pionchon@nokia.com>
* docs/manual/advanced-autoplugging.xml:
* docs/manual/advanced-threads.xml:
* docs/manual/basics-bins.xml:
* docs/manual/basics-elements.xml:
* docs/manual/basics-helloworld.xml:
* docs/manual/basics-pads.xml:
Add scale factor for pdf output.
* docs/manual/intro-basics.xml:
Switched sections "pads" and "bins" and added a pipeline diagram.
* docs/manual/intro-gstreamer.xml:
Added more info on gstreamer.
* docs/manual/intro-motivation.xml:
Commented out the whole section "current problem", which sounds
historical and somehow osolete; it could be turned in a positive
way and reused to improve the design principles.
* docs/manual/intro-preface.xml:
- Update URLs to library.gnome.org.
- Do not mention GTK+ in preliminary reading (irrelevant).
- Mention Plugin Writer's Manual and further reading only in the
previous section.
- Added a list of most relevant GObject/glib topics.
* docs/manual/Makefile.am:
* docs/manual/bin-element-ghost.fig:
* docs/manual/bin-element-ghost.png:
* docs/manual/bin-element-noghost.fig:
* docs/manual/bin-element-noghost.png:
* docs/manual/bin-element.fig:
* docs/manual/bin-element.png:
* docs/manual/filter-element-multi.fig:
* docs/manual/filter-element-multi.png:
* docs/manual/filter-element.fig:
* docs/manual/filter-element.png:
* docs/manual/gstreamer-overview.png:
* docs/manual/hello-world.fig:
* docs/manual/hello-world.png:
* docs/manual/linked-elements.fig:
* docs/manual/linked-elements.png:
* docs/manual/mime-world.fig:
* docs/manual/mime-world.png:
* docs/manual/queue.fig:
* docs/manual/queue.png:
* docs/manual/simple-player.png:
* docs/manual/sink-element.fig:
* docs/manual/sink-element.png:
* docs/manual/src-element.fig:
* docs/manual/src-element.png:
* docs/manual/diagrams-general.svg:
* docs/manual/diagrams-pipelines.svg:
Removed .fig, added .png counterpart.
Fixes: #539137
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
* plugins/elements/gstmultiqueue.h:
revert extra-size-buffers stuff, caused some race conditions
and extra-size-buffers is not used anymore. Docs needs some updates
Original commit message from CVS:
patch by: Luc Pionchon <luc.pionchon@nokia.com>
* docs/manual/manual.xml:
- Reorganised the previous "introduction" bundle into Foreword,
Introduction, and About GStreamer. The two first are <preface>
docbook elements. The later is the first part of the book.
- added intro-gstreamer.xml (content partially from
intro-preface.xml)
- moved appendix-win32.xml into appendix-integration.xml
* docs/manual/intro-preface.xml: gstreamer section moved...
* docs/manual/intro-gstreamer.xml: ...here. new file.
* docs/manual/appendix-win32.xml: removed file. Content moved...
* docs/manual/appendix-integration.xml: ...here.
* docs/manual/highlevel-components.xml: section about GstEditor moved...
* docs/manual/appendix-checklist.xml: ...here.
Original commit message from CVS:
patch by: Luc Pionchon <luc.pionchon@nokia.com>
* docs/manual/basics-helloworld.xml:
* docs/manual/hello-world.fig:
- Explicitely include glib.h.
- Do not use global variables.
- Use g_printerr() instead of g_print().
- Minor formating/renaming to increase readibility.
- Renamed new_pad() to on_pad_added()
- Improved explenatory comments.
- renamed ogg parser to ogg demuxer
- Use "autoaudiosink" instead of "alsasink".
Fixes: #538619
Original commit message from CVS:
* docs/README:
Document that for plgin-docs we extraxt he short-desc from the element
details.
* docs/design/part-states.txt:
Tell that devices should be closed in PAUSED -> READY.
* docs/manual/README:
Document how tests in the manual are handled.
* docs/manuals.mak:
Typo in comment.
Original commit message from CVS:
* docs/design/part-block.txt:
Fix typo.
* docs/design/part-element-transform.txt:
Add notes about why transform needs to know input/output sizes.
Add some issues that need to be solved.
Add some more use cases.
* tests/check/libs/test_transform.c: (gst_test_trans_base_init),
(gst_test_trans_class_init), (result_sink_chain),
(result_buffer_alloc), (gst_test_trans_new), (gst_test_trans_free),
(gst_test_trans_push), (gst_test_trans_pop):
* tests/check/libs/transform1.c: (buffer_alloc_pt1),
(set_caps_pt1), (GST_START_TEST), (set_caps_pt2), (transform_ip_1),
(set_caps_1), (set_caps_ct1), (transform_ct1),
(transform_caps_ct1), (transform_size_ct1), (buffer_alloc_ct1),
(gst_basetransform_suite):
Add suport for different pad templates and buffer-alloc.
Add more checks for caps and buffer-alloc.
Add checks for proxy buffer alloc.
Add unit test for copy transform.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix some memory leaks and uses of object instances that we don't
actually own.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
Don't update the cur_time on GST_CLOCK_TIME_NONE (#537804) and don't
activate the pads if they are added in STATE_NULL.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Add new API to doc
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
API: gst_check_teardown_pad_by_name
Original commit message from CVS:
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
Also setup request pads and allow setup pads by name (#537812)
API: gst_check_setup_src_pad_by_name
API: gst_check_setup_sink_pad_by_name
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/test_transform.c: (gst_test_trans_base_init),
(gst_test_trans_class_init), (gst_test_trans_init),
(gst_test_trans_set_data), (result_sink_chain),
(gst_test_trans_new), (gst_test_trans_free), (gst_test_trans_push),
(gst_test_trans_pop):
* tests/check/libs/transform1.c: (GST_START_TEST),
(transform_ip_1), (set_caps_1), (gst_basetransform_suite):
Add some test basetransform element and the beginnings of various
unit tests for it.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (helper_find_peek):
Increase code readability.
Don't try to compare buffer offsets when ther are invalid.
Original commit message from CVS:
* docs/design/Makefile.am:
Dist some more design docs.
* docs/random/moving-plugins:
Small addition: good plugins mustn't have functional code
within assertion macros.
Original commit message from CVS:
* docs/design/draft-framestep.txt:
Some ideas about a framestep API
* docs/design/part-element-transform.txt:
Start design and use cases for basetransform in order to get it
fixed soon.
Original commit message from CVS:
Patch by: joel larsson <tilljoel at gmail dot com>
* docs/plugins/gstreamer-plugins.args:
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_update_fd),
(gst_fd_src_set_property), (gst_fd_src_get_property),
(gst_fd_src_create):
* plugins/elements/gstfdsrc.h:
Add timeout property like udpsrc. Fixes#538628.
Add some more docs and example pipelines.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_query_latency), (gst_base_sink_set_render_delay),
(gst_base_sink_get_render_delay), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
* win32/common/libgstbase.def:
Add method to allow sinks to specify additional delay between the sync
times and the actual rendering of the data.
API: gst_base_sink_set_render_delay()
API: gst_base_sink_get_render_delay()
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
Use freeze/thaw notify to sync notify emission a bit (its also more
efficient). Move debug output to LOG (is called a lot in a loop).
Always unset g_values if the have been initialized.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_eos), (gst_base_sink_event):
If we have not seen a buffer before EOS, use the segment values to
report the current position instead of invalid positions.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
* libs/gst/controller/gstinterpolationcontrolsource.c:
* tests/check/libs/controller.c:
Rewrite handling of default values. Fix overflow with unsigned types
in linear interpolation. Remove now obsolete _first_value() function.
Add more tests. Fixes#538201.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_transform_caps),
(gst_base_transform_prepare_output_buffer):
Add debug info.
When a buffer is writable, its metadata is also writable so we don't
need to subbuffer (which then makes the buffer not-writable anymore).
