Rather than create a dummy display, if none has propagated as a context, we
should try to get the one from vaapidecode.
As the bin is already in READY state, the vaapidecode should be also in that
state. That means that the contexts have been negotiated, and it should have
already a display.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757957
The former approach to left the bin unfinished has some problems: the context
cannot be shared because the vaapidecode is unlinked in many cases, leading to
creating a VADisplay twice.
Initially the bin is fully functional, constructed as
(-----------------------------------)
| vaapidecodebin |
| (-------------) (-------) |
|<--| vaapidecode |--->| queue |--->|
| (-------------) (-------) |
(-----------------------------------)
When the context is shared and the VADisplay has VPP capabilities, before
changing to READY state, the bin is reconfigured dynamically, adding the
vaapipostproc element afeter the queue:
(--------------------------------------------------------)
| vaapidecodebin |
| (-------------) (-------) (---------------) |
|<--| vaapidecode |--->| queue |--->| vaapipostproc |--->|
| (-------------) (-------) (---------------) |
(--------------------------------------------------------)
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757957
Delay the bin configuration until changing to READY state. This is because we
should add the vaapipostproc element until the vaapidecode has emitted the
HAVE_CONTEXT message, so de gst_bin_add() could set the context set to
vaapipostproc.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757957
Set crop rectange if:
There is display_width and display_height which is different from actual width/height
or
The changed resolution is less than the actual configured dimension of surfaces
Unlike other decoders, vp9 decoder doesn't need to reset the
whole context and surfaces for each resolution change. Context
reset only needed if resolution of any frame is greater than
what actullay configured. There are streams where a bigger
resolution set in ivf header or webm header but actual resolution
of all frames are less. Also it is possible to have inter-prediction
between these multi resolution frames.
clang complains about a couple variables and one label which were not
used. This patch removes them.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757958
Since gstreamer 1.4 is not required to have pad query functions if the query
vmethods are used.
This patch guards out the pad query functions for gstreamer < 1.4
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757629
GstVideoEncoder, the base class of vaapiencode, added support for pad queries
as virtual methods since gstreamer 1.4. This patch enables those vmethods,
while keeps support for previous versions of gstreamer.
This patch is relevant since GstVideoEncoder takes care of other queries that
we are currently ignoring.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757629
A caps query can occur before the element has a display. In that case, the
element can return its pad's template. But when the element already has a
display, and the caps probe fails, the element shall return an empty caps, so
the auto-plug could try with another decoder.
If the element has a display and the caps probe works, then the computed caps
should be returned.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Caps query can happen before the element has a bus. The display creation should
be should occur on the context negotiation, when the bus is already configured.
Then at caps query no display should be created.
Instead of force the display creation, we graciously fail the allowed_caps()
creation.
This change only applies for vaapidecode and vaapisink. The vaapipostroc, as a
basetransform descendant, seems to be not affected by this, nor the encoders.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
The current context query handling design is flawed: the function
gst_vaapi_reply_to_query() returns FALSE either if the query is not a
GST_CONTEXT_QUERY of if the query could not be handled correctly. But the
pad query function should handle differently each case.
This patch changes the gst_vaapi_reply_to_query() for
gst_vaapi_handle_context_query() and changes it usage in all the vaapi plugins
to match the correct context query handling.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
When processing the GST_CONTEXT_QUERY we should not lose the previous
context in the query, we should only add our display structure.
This patch copies the old context, if it is there, and stamp our display on
it. Otherwise, a new context is created.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
This function set the display to an already created context. This function is
going to be used later.
Also, gst_vaapi_video_context_new_with_display() now uses this function.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Since the context messages are sync'ed, the display assignation happens in the
same thread, hence we can know if the display was found or not as soon we call
for it.
In order to take advantage of it, gst_vaapi_video_context_prepare() receives,
as a new parameter, the address of the plugin's display, and reports back if
the display was found and set.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Instead of setting the display to the plugin directly after its creation, do
it through the gstreamer's context mechanism, avoiding double assignations.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
The context structure is named "display" which is too generic. The contrary
happens, for example, with GstGL, what uses the same name as the context, and
its logs make more sense.
This patch renames the context structure with the same name as the
context, thus GST_PTR_FORMAT can pretty print it.
https://bugzilla.gnome.org/show_bug.cgi?id=757598
First, refactorized run_context_query() into _gst_context_run_query(), adding
a new parameter: the pad direction, in order to simplify the code.
Second, added a new helper function: _gst_context_query(), which is a generic
context query function. It isolates the operation of running the query and
sets the context if found, also it enhances the logs.
_gst_context_query() is similar to the one used in GstGL. Perhaps, in the
future this helper function will be merged into the core libraries of
GStreamer.
Finally, gst_vaapi_video_context_prepare() was rewritten to use
_gst_context_query().
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Refactor the extraction GST_CAT_CONTEXT logging using a only once
initializator, so we could get the debug category from different code
paths, safely.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
gst-indent does not handle correctly some expression like function
declaration with attributes, breaking the following expressions.
This patch makes gst-indent to ignore the attributed function
declartion so the followed function definition is not mangled, such
as happened in commit b4154a
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
The display returned by gst_vaapi_video_context_get_display() increments the
references. Thus, we have to unref the returned display.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757595
Since gstvaapidisplay_glx.h do not expose gl.h/glx.h structures, it is not
required to include them in the header. It is not also required to include
them in gstvaapidisplay_glx.c, since gstvaapiutils_glx.h includes them and
exposes their structures (e.g. GLXPixmap).
Nonetheless, glext.h neither glxext.h are required to include, they are
already included conditionally by gl.h and glx.h, respectively.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757577
If the environment lacks of gstreamer development packages, this error will
be reported to the user: "gstreamer- was not found"
This is because we are using an undefined variable in the printed message. The
fix simple changes the variable for the hard-coded string "1.0".
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757283
Though caps features are supported since GStreamer 1.2, there are some
issues with the features caps negotiation in that version. Nonetheless,
those issues are fixed in GStreamer 1.4. So, the memoy:VASurface caps
feature negotiation is relaxed for GStreamer 1.4.
The guard is the same as in vaapisink's caps template.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=756686
The received caps query will bring the already negotiated caps, so they are
not expected to change.
This patch removes this verification which is dead code path.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=756686
Instead of calling gst_vaapi_find_preferred_caps_feature(), which is
expensive, we check the caps from the allocation query, to check the
negotiated feature.
In order to do this verification a new utility function has been implemented:
gst_vaapi_caps_feature_contains().
As this new function shared its logic with gst_caps_has_vaapi_surface(), both
have been refactorized.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=756686
There is a regression from commit 3d8e5e. It was expected the buffer pool
allocation occur before the caps negotiation, but it is not.
This patch fixes this regression: the caps negotiation is done regardless the
allocation query from downstream.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=756686
Support for GStreamer 1.2 is obsolete. i.e. it is no longer supported.
Our goal is to support the last two stable versions of GStreamer which
are 1.4 and 1.6 at the moment.
We still keep the 1.2 specific codes until the next gstreamer-vaapi-0.7
release and will get rid of those in 0.8.
gst_buffer_copy_deep() was added in GStreamer 1.5. If want to use it we should
add an implementation if gstreamer-vaapi is linked to previous versions.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
