Commit graph

202 commits

Author SHA1 Message Date
Guillaume Desmottes
5a5bf4b3e3 h264parse: add constrained and progressive profiles
Those profiles have been added in the version 2012-01
and 2011-06 of the AVC spec.

https://bugzilla.gnome.org/show_bug.cgi?id=794127
2018-04-25 09:12:45 +02:00
Brendan Shanks
8e3827b7be h264parse: reset internal 'state' variable properly
Reset the internal 'state' variable when the parser is started, fixes
errors when parser is being re-used.

https://bugzilla.gnome.org/show_bug.cgi?id=794537
2018-03-21 09:12:28 +02:00
Nicolas Dufresne
7e45b9f03f Revert "h264parse: early set src caps when input is avc"
This reverts commit 5ac886d85a.
2018-03-02 10:37:45 -05:00
Guillaume Desmottes
a1b271d2ec h26{4,5}parse: expose chroma format and bit depth in caps
This information could be used for example to pick a decoder supporting
a specific chroma and/or bit depth, like 4:2:2 10 bits.
It can also be used to inform earlier decoder about the format it is
about to decode.

https://bugzilla.gnome.org/show_bug.cgi?id=792039
2018-01-24 11:50:54 -05:00
Tim-Philipp Müller
c0226e08e3 h264parse: make caps writable before modifying them
https://bugzilla.gnome.org/show_bug.cgi?id=790628
2017-12-07 19:17:07 +00:00
Guillaume Desmottes
5ac886d85a h264parse: early set src caps when input is avc
When input is in AVC format there is no need to wait for the first buffer
before setting src caps. We already have all the information from the
input codec_data.

This allow us to already configure downstream elements allowing them,
for example, to already allocate their internal buffers as they know
the format of the input they are about to receive.

https://bugzilla.gnome.org/show_bug.cgi?id=790709
2017-11-24 11:13:05 +02:00
Guillaume Desmottes
d5067b42de h264parse: put downstream caps first if possible on sink caps
Try prioritizing downstream's caps over upstream's if possible so the
parser can configured in "passthrough" if possible and save it from
doing useless conversions.

https://bugzilla.gnome.org/show_bug.cgi?id=790628
2017-11-22 17:38:04 +02:00
Vincent Penquerc'h
a06423efa4 h264parse: fix caps leak in renegotiation 2017-05-12 11:15:00 +01:00
Sebastian Dröge
8f8c5e25fa h264parse: frame->buffer can't be NULL in pre_push_frame()
CID 1402118
2017-03-08 14:22:52 +02:00
Hyunjun Ko
a997a99fdd h264parse: fix some failures in testcases
Move logic of judgement whether or not to insert AU Delimiter before
draining.
Besides, aud_needed flag is reset to TRUE when skip.

https://bugzilla.gnome.org/show_bug.cgi?id=736213
2017-03-08 14:18:18 +02:00
Hyunjun Ko
201e71c3aa h264parse: insert AU delimiter only in case of byte-stream
Inserts AU delimeter by default if missing au delimeter from upstream.
This should be done only in case of byte-stream format.

Note that:
We have to compensate for the new bytes added for the AU, otherwise
insertion of PPS/SPS will use wrong offsets and overwrite wrong data.

Also mark the AU delimiter blob const, and use frame->out_buffer for
storing the output to keep baseparse assumptions valid.

Original-Patch-By: Michal Lazo <michal.lazo@mdragon.org>
Helped by Sebastian Dröge <sebastian@centricular.com>

https://bugzilla.gnome.org/show_bug.cgi?id=736213
2017-03-07 13:27:33 +02:00
Thibault Saunier
b75a61342f h264parse: Include interlace-mode in caps
Those are the rules:

In the SPS:
  * if frame_mbs_only_flag=1 => all frame progressive
  * if frame_mbs_only_flag=0 => field_pic_flag defines if each frame is
    progressive or interlaced, thus the mode is 'mixed' in GStreamer
    terms.

https://bugzilla.gnome.org/show_bug.cgi?id=779309
2017-02-27 15:28:31 -03:00
Sebastian Dröge
55043aff12 h264parse: Fix indentation 2016-11-26 12:16:58 +02:00
Sebastian Dröge
47bf425cba h264parse: Fix assertion when encountering an invalid NALU
Error out properly instead.

https://bugzilla.gnome.org/show_bug.cgi?id=775130
2016-11-26 12:16:58 +02:00
Sebastian Dröge
1dbfef93d6 h264parse: Ensure codec_data has the required size when reading number of SPS
https://bugzilla.gnome.org/show_bug.cgi?id=774896
2016-11-23 10:53:40 +02:00
Nirbheek Chauhan
bb0a83b018 plugins: Use explicit type conversion from enums
MSVC warns about this because it's a C++ compiler, and this actually
results in useful things such as the incorrect 'gboolean' return value
for functions that return GstFlowReturn, so let's do explicit
conversions to reduce the noise and increase its efficacy.
2016-10-27 23:06:26 +05:30
Sreerenj Balachandran
14cc51cddc videoparsers: h264: Add more scalable profiles to the profile list
Adding Scalable Constrained High (G.10.1.2.1) and
Scalable High Intra(G.10.1.3) profiles to the profile list

https://bugzilla.gnome.org/show_bug.cgi?id=769303
2016-08-02 14:26:40 +03:00
Edward Hervey
c19d1b46c3 h264parse: Drop filler data
When skipping data, check if they are filler bytes. If so, drop the
data instead of skipping. We don't want to output filler bytes, but they
shouldn't cause a discontinuity.

https://bugzilla.gnome.org/show_bug.cgi?id=768125
2016-06-30 10:32:01 +02:00
Jan Schmidt
92e7e3a3bf h264parse: When input alignment=AU, always drain each packet.
If the input alignment claims AU alignment, each received
buffer should contain a complete video frame, so never hold over parts
of buffers for later processing. Also reduces latency, as packets
are parsed/converted and output immediately instead of 1 buffer
later.

Fixes a problem where an (arguably disallowed) padding byte on the
end of a buffer is detected as an extra byte in the following
start code, and messes up the timestamping that should apply to
that start code.
2016-06-24 22:55:18 +10:00
Mats Lindestam
a0876aa750 h264parse: support for handling of config-interval = -1
Added support for handling of config-interval = -1.
config-inteval = -1 represents resending SPS and PPS for each
I-/IDR-frame.

https://bugzilla.gnome.org/show_bug.cgi?id=766803
2016-06-13 10:10:21 +01:00
Mats Lindestam
bf0d952387 h264parse: refactored handling of SPS/PPS when pushing frames
https://bugzilla.gnome.org/show_bug.cgi?id=766803
2016-06-13 10:10:05 +01:00
Mats Lindestam
0c04e004bb h264parse: change "config-interval" property type from uint to int
So we can use -1 as special value like in rtph264pay.

https://bugzilla.gnome.org/show_bug.cgi?id=766803
2016-06-13 10:08:22 +01:00
Sebastian Dröge
4bdda1d810 h264parse: H264 level idc 0 is not valid
Don't put level=0 into the caps, it confuses other elements.

https://bugzilla.gnome.org/show_bug.cgi?id=765538
2016-04-25 18:50:59 +03:00
Sebastian Dröge
0fa43aaab4 h264parse: constrained-baseline is a subset of baseline
We get into this code path if the profile is already constrained-baseline and
downstream does not support constrained-baseline. So we should try baseline
and the other compatible profiles.

https://bugzilla.gnome.org/show_bug.cgi?id=764448
2016-04-01 12:08:29 +03:00
Vineeth TM
8cdfb13658 bad: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763081
2016-03-24 14:56:51 +02:00
Aleksander Wabik
d8e681bb63 h264parse, h265parse: fix handling of downstream force-key-unit events
The parser handles the downstream force-key-unit event incorrectly,
it tries to parse it as an upstream force-key-unit event, does not
check the return value, and then uses uninitialized memory in
"all_headers" boolean variable.

https://bugzilla.gnome.org/show_bug.cgi?id=763793
2016-03-17 19:24:32 +00:00
Sreerenj Balachandran
cf7056a312 videoparsers: h264: Disable passthorugh mode enabling
Enabling passthorugh mode is causing multiple issue:
For nal aligned multiresoluton streams, passthrough mode
make h264parse unable to advertise the new resoultions.
Also causing issues while parsing MVC streams which have two
separate layers (base-view and non-base-view).

This fix is only a temporary workaround.

For MVC, proper fixes needed in many places:
(handle prefix nal unit, handle non-base-view slice nal extension,
fix the picture_start detection for multi-layer-mvc streams etc)

https://bugzilla.gnome.org/show_bug.cgi?id=758656
2016-02-29 12:35:58 +02:00
Luis de Bethencourt
63af4649c6 h264parse: remove unused mview_mode value
Since commit b77f8e172a the new value
assigned to mview_mode hasn't been used. That commit changed the following
"if" check to an "else if", which means the original value of mview_mode
is used.
2016-02-04 12:50:47 +00:00
Matthew Waters
72bc7d7f73 h264parse: increase caps equality check for no codec_data
When converting from avc to byte-stream, there will not be any codec_data
in the src caps.  Remove it before the equality check to avoid sending caps
events downstream on every SPS/PPS change.

https://bugzilla.gnome.org/show_bug.cgi?id=761014
2016-02-04 18:07:57 +11:00
Matthew Waters
f352691a04 h264parse: try the current caps before querying downstream
If we have a stream that contains an unchanging SPS/PPS for every video frame,
we don't need to to constantly query downstream for it's supported caps if the
current caps are compatible with the negotiated caps.

https://bugzilla.gnome.org/show_bug.cgi?id=761014
2016-02-04 18:07:47 +11:00
Dave Craig
88d7beb921 videoparsers: Check for NULL return value of gst_pad_get_current_caps()
https://bugzilla.gnome.org/show_bug.cgi?id=759503
2015-12-16 10:08:43 +01:00
Nicolas Dufresne
fe116092cd h26xparse: Resend PPS/SPS after seek
This is to support byte-stream decoder that does not remember the
PPS/SPS after a flush. This is not needed by all decoders, but is
harmless for those that do remember.

https://bugzilla.gnome.org/show_bug.cgi?id=758405
2015-12-05 19:05:26 -05:00
Nicolas Dufresne
b392a6e3b9 h264parse/h265parse: Fix negotiation crash
As it's recursive, gst_pad_get_allowed_caps() may also return
empty for anything incompatible downstream. EMPTY is not valid caps
value for gst_caps_fixate(). This lead to assertion and then crash.
Ideally, the negotiate function should be re-factored to have a return
value, and we could make the negotiation fails earlier.

https://bugzilla.gnome.org/show_bug.cgi?id=754122
2015-08-26 10:56:07 -04:00
Olivier Crête
567b1e8c46 videoparsers: Use gst_base_parse_merge_tags()
Instead of squashing all upstream tags

https://bugzilla.gnome.org/show_bug.cgi?id=679768
2015-08-16 17:28:29 +01:00
Jan Schmidt
fdac09d843 h264parse: Clear SPS info after processing.
The SPS struct might be filled out by a call to
gst_h264_parser_parse_subset_sps, which fills out
dynamically allocated data and requires a call
to gst_h264_sps_clear() to free it. Also make sure
to clear out any allocated SPS data when returning
an error.

https://bugzilla.gnome.org/show_bug.cgi?id=753306
2015-08-15 15:39:23 +10:00
Thiago Santos
c4cd1ce4fd videoparsers: enable accept-template flag
Do a quick check with the pad template caps as it is enough. Users
should have figured the appropriate full caps on a previous caps query

https://bugzilla.gnome.org/show_bug.cgi?id=753623
2015-08-14 13:42:59 -03:00
Jan Schmidt
c1b0d818bb h264parse: Add more NAL types for debugging output.
Register more NAL unit types so that they are dumped
by name in the debug output instead of being labelled
'Invalid'
2015-07-29 23:10:49 +10:00
Jan Schmidt
48a1f27923 h264parse: Don't discard first AU delimiter
Don't throw away AU delimiter(s) that precede the SPS/PPS. Should
fix MPEG-TS playback on iOS/Quicktime when muxing streams that
already have AU delimiters.

See https://bugzilla.gnome.org/show_bug.cgi?id=736213 for getting
h264parse to insert AU delimiters when they don't already
exist.
2015-07-24 02:46:21 +10:00
Tim-Philipp Müller
1bf7ca64c0 h264parse: fix typo in log message 2015-06-20 16:07:57 +01:00
Jan Schmidt
b77f8e172a h264parse: Move PAR calcs, and use them for stereoscopic half-aspect
Move the pixel-aspect-ratio calculations higher up in caps
determination, so the results are available for a call to
gst_video_multiview_guess_half_aspect() when stereoscopic video
is detected.
2015-06-19 01:49:33 +10:00
Jan Schmidt
08c73f9cc7 h264parse: Add support for passing stereoscopic/multiview info
Pass any multiview info from the container or SEI info downstream
2015-06-12 00:39:15 +10:00
Jan Schmidt
e8908f5aee h264parse: Don't switch to passthrough on set_caps()
Wait until at least one keyframe has been parsed before
deciding to switch to passthrough mode, in case the
stream contains SEI messages that supplement the output
caps - for example by providing stereoscopic information
2015-06-12 00:39:15 +10:00
Edward Hervey
69c09c38cf h264parse: Consider SEI NALU as "HEADER" packets
Like SPS/PPS they do contain information which will be needed to
decode the following data (as per definition of the flag)

Also ensures that the series of SPS/PPS/SEI NALU before a keyframe
can be considered as one contiguous header
2015-05-20 15:41:11 +02:00
Luis de Bethencourt
8899efae60 Update references to decodebin
Update old references for decodebin2 to decodebin.
2015-05-08 13:54:08 +01:00
Sreerenj Balachandran
3fae18b5d2 h264parse: Fix profile and level setting in caps
Don't use the apis in codec-utils to extract the profile and level
syntax elements since it is wrong if there are emulation prevention
bytes existing in the byte-stream data.

https://bugzilla.gnome.org/show_bug.cgi?id=747613
2015-05-04 09:30:05 +02:00
Luis de Bethencourt
c944093d08 remove unused enum items PROP_LAST
This were probably added to the enums due to cargo cult programming and are
unused.
2015-04-24 16:48:26 +01:00
Edward Hervey
8ba1fbbe64 h264parse: Remove dead code
The detection for missing format/alignment is done way before this
codepath is reached (at which point we have already decided of a
format and alignment).

CID #1232800
2015-04-20 14:35:19 +02:00
Sebastian Dröge
9b50a12b52 h264parse: Don't unref buffer that was unreffed just a few lines before already 2015-04-15 21:07:59 +02:00
Thiago Santos
14f6fcdbd8 h264parse: reset the parser information when caps changes
This prevents it from going into passthrough after receiving 2
byte-stream caps (different ones) as it would keep the have_pps and
have_sps set to true and would just go into passthrough without
updating its caps.

This patch makes it reset its stream information to restart properly
when new caps are received.

https://bugzilla.gnome.org/show_bug.cgi?id=745409
2015-03-04 08:00:52 -03:00
Víctor Manuel Jáquez Leal
654e2a0298 h264parse: expose stereo-high profile
Exposing stereo-high profile as a compatible profile of multiview-high
if the maximum number of encoded views in the stream is two.

https://bugzilla.gnome.org/show_bug.cgi?id=743174
2015-01-21 01:03:36 +11:00