Commit graph

20 commits

Author SHA1 Message Date
yychao
adc3d12741 tsdemux: Add support for AC4
According to following two specs, add support for AC4 in tsdemux.

1. ETSI TS 103 190-2 V1.2.1 (2018-02) : Annex D (normative): AC-4 in MPEG-2 transport streams
2. ETSI EN 300 468 V1.16.1 (2019-08) : Annex D (normative):Service information implementation of AC-3, EnhancedAC-3, and AC-4 audio in DVB systems
2020-03-09 21:54:09 +00:00
Scott D Phillips
0345fb8aef mpegtsdemux: fix operator precedence in SAFE_FOURCC_ARGS
Type cast has higher precedence than bitwise shift, so the third
argument will truncate to 8 bits and then shift right by 8 bits
resulting in constant zero.

https://bugzilla.gnome.org/show_bug.cgi?id=774293
2016-11-12 10:53:02 +02:00
Wonchul Lee
35d147930d tsdemux: Support ATSC EAC3
EAC3 bit streams shall be identified with a stream_type value of 0x87 when
transmitted as PES streams conforming to ATSC-published standards. It is specified
in ATSC Standard A/52.

https://bugzilla.gnome.org/show_bug.cgi?id=770528
2016-09-01 17:56:41 -04:00
Michael Olbrich
48c5cc1b1b tsdemux: add support for LPCM with stream_type = 0x83
https://bugzilla.gnome.org/show_bug.cgi?id=765807
2016-07-25 13:38:29 +03:00
Edward Hervey
f96604099d tsdemux: Fix scaling macros
While the calculation done in these macros will work with 64bit
integers, they will fail if working with 32bit integers.

Force the scaling up to solve that.

This amazingly didn't introduce major issues up to now, but resulted
in bogus values in debug logs.
2014-04-18 16:20:31 +02:00
Edward Hervey
2762ead5ef mpegtsdemux: New PCR<=>Offset estimation code
This allows:
* Better duration estimation
* More accurate PCR location
* Overall more accurate running-time location and calculation

Location and values of PCR are recorded in groups (PCROffsetGroup)
with notable PCR/Offset observations in them (when bitrate changed
for example). PCR and offset are stored as 32bit values to
reduce memory usage (they are differences against that group's
first_{pcr|offset}.

Those groups each contain a global PCR offset (pcr_offset) which
indicates how far in the stream that group is.

Whenever new PCR values are observed, we store them in a sliding
window estimator (PCROffsetGroupCurrent).

When a reset/wrapover/gap is detected, we close the current group with
current values and start a new one (the pcr_offset of that new group
is also calculated).

When a notable change in bitrate is observed (+/- 10%), we record
new values in the current group. This is a compromise between
storing all PCR/offset observations and none, while at the same time
providing better information for running-time<=>offset calculation
in VBR streams.

Whenever a new non-contiguous group is start (due to seeking for example)
we re-evaluate the pcr_offset of each groups. This allows detecting as
quickly as possible PCR wrapover/reset.

When wanting to find the offset of a certain running-time, one can
iterate the groups by looking at the pcr_offset (which in essence *is*
the running-time of that group in the overall stream).
Once a group (or neighbouring groups if the running-time is between two
groups) is found, once can use the recorded values to find the most
accurate offset.

Right now this code is only used in pull-mode , but could also
be activated later on for any seekable stream, like live timeshift
with queue2.

Future improvements:
* some heuristics to "compress" the stored values in groups so as to keep
  the memory usage down while still keeping a decent amount of notable
  points.
* After a seek compare expected and obtained PCR/Offset and if the
  difference is too big, re-calculate position with newly observed
  values and seek to that more accurate position.

Note that this code will *not* provide keyframe-accurate seeking, but
will allow a much more accurate PCR/running-time/offset location on
any random stream.
For past (observed) values it will be as accurate as can be.
For future values it will be better than the current situation.
Finally the more you seek, the more accurate your positioning will be.
2013-09-28 13:15:43 +02:00
Edward Hervey
cea403eaa5 mpegdefs: Simplify PCR/PTS/DTS => GST conversion macros
We know we will not overflow 64 bits, therefore just use direct
multiplication/division instead of the scale method (trims usage from
50 instruction calls to 2/3).
2013-07-29 09:42:11 +02:00
Edward Hervey
a3b6b1a951 mpegtsdemux: Handle registration descriptor for programs and streams
* Allows us to simplify some code and prepare for future cleanups.
* Remove useless casts
* Add some FIXME regarding VC1
2013-07-06 10:59:54 +02:00
Edward Hervey
7814ed196b mpegtsdemux: Switch to using GstMpegTsStreamType
We still have some other stream types which haven't been ported, but
we will do so once we have defined the enums in the mpegts library.

Also add some FIXMEs regarding items discovered during analysis
2013-07-04 08:45:32 +02:00
Edward Hervey
92edd82c86 mpegtsdemux: Switch to MPEG-TS SI library
* Only mpeg-ts section packetization remains.
* Improve code to detect duplicated sections as early as possible
* Add FIXME for various issues that need fixing (but are not regressions)

https://bugzilla.gnome.org/show_bug.cgi?id=702724
2013-07-03 09:17:25 +02:00
Edward Hervey
05b51dfec0 mpegtsdemux: header cleanups/updates 2013-04-26 15:49:18 +02:00
Greg Rutz
2306d51d9d tsdemux: Add support for Motorola DigiCipher II MPEG2 video
Since there is a conflict between the DCII stream type and BluRay
stream types, moved the processing of BluRay-specific stream types
to the beginning of the function.  Only if a BluRay stream type
IS NOT found do we proceed to check the rest of the stream type
identifiers

Previous code was also "sort-of" handling a similar conflict between
BluRay AC3 audio and standard AC3 audio.  Moved the special case BluRay
AC3 handling in the main switch statement to the new BluRay-specific
switch.

https://bugzilla.gnome.org/show_bug.cgi?id=697892
2013-04-18 09:30:58 +02:00
Tim-Philipp Müller
9e1b75fda3 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:09:59 +00:00
Edward Hervey
25f6c78d79 mpegdefs: Add list of known table_id
Along with the specifications from which they come. Avoids having
to search for which spec a table_id belongs to
2012-06-05 10:54:26 +02:00
Edward Hervey
097f09b823 mpegtsbase/tsdemux: Refactor seek and segment handling
All calculations go through the mpegtspacketizer
Remove unused variables/code
2012-03-01 18:15:51 +01:00
Thibault Saunier
cda0d3aed8 tsdemux: Add AAC latm support 2012-02-15 15:48:44 -03:00
Edward Hervey
42cf7d016c mpegdefs: clarify some stream ids 2011-07-17 09:49:06 +02:00
Janne Grunau
bf046719a2 mpegtsdemux: add stream types for DSM CC A, B, C, D 2011-03-21 19:27:08 +01:00
Janne Grunau
535bf57d1f mpegtsdemux: relicense gstmpegdefs.h, gstmpegdesc.h and gstmpegdesc.c to LGPL only
with permission from the license header:
"""
This library is licensed under 2 different licenses and you
can choose to use it under the terms of either one of them. The
two licenses are the MPL 1.1 and the LGPL.
"""
2011-02-17 17:57:17 +01:00
Janne Grunau
22ecf13e42 mpegtsdemux: add MPEG TS demuxer rewrite from Edward Hervey
with contributions from Miquel Angel Farre Guiu and Zaheer Abbas Merali
2011-02-17 17:56:59 +01:00