Commit graph

8176 commits

Author SHA1 Message Date
Wim Taymans
c971d1a9ab rtpsource: refactor bitrate estimation
Don't reuse the same variable we need for stats for the bitrate estimation
because we're updating it.
Refactor the bitrate estimation code so that both sender and receivers use the
same code path.
2010-03-08 17:48:00 +01:00
Tristan Matthews
a0a6d4ff3b added bitrate estimation to receiver-side stats, fixes #611213 2010-03-08 17:47:55 +01:00
Wim Taymans
968c981e74 h263pay: fix typo in debug 2010-03-08 17:47:14 +01:00
Tim-Philipp Müller
4379378239 Release 0.10.19 2010-03-06 00:43:03 +00:00
Tim-Philipp Müller
bcad939757 Update .po files 2010-03-06 00:42:09 +00:00
Tim-Philipp Müller
552d6b703d 0.18.4 pre-release 2010-03-03 20:29:30 +00:00
Edward Hervey
869ff4263f matroskademux: Make sure we don't send invalid newsegments
Fixes #611501
2010-03-02 21:20:45 +01:00
Edward Hervey
be186bd089 matroskademux: Mark streams as being EOS at the right time.
This allows us to stop streaming only when all streams have gone past the
segment.stop and not before.

Fixes #611501
2010-03-02 21:20:31 +01:00
Sebastian Dröge
ad71d43f52 matroskademux: Advance sparse streams only as much as required to keep the gap smaller than 500ms
Changing it to the newest timestamp that was ever pushed will
increase the segment start in 500ms jumps, which could be just
after the next sparse stream buffer. E.g.

Video at 1.0s, sparse stream at 0.5s would jump the
sparse stream to 1.0s. Now a new sparse stream buffer could
appear that has a timestamp of 0.9s and this would be
dropped for no good reason because of bad luck.
2010-02-27 12:20:06 +01:00
Tim-Philipp Müller
ec642338e3 0.10.18.3 pre-release 2010-02-24 21:31:00 +00:00
Alessandro Decina
49b2a94644 Make sure FLUSH_STOP is sent so not to leave downstream flushing. 2010-02-24 02:05:49 +01:00
Volker Grabsch
673459c711 configure: Use $PKG_CONFIG instead of pkg-config to fix cross compilation
Fixes bug #610839.
2010-02-23 17:25:54 +01:00
Sebastian Dröge
bcd06ea527 rtpjitterbuffer: Reset skew detection after instantiating the jitterbuffer
...not only when going to READY. This sets high_level and friends to
a more useful value.
2010-02-23 17:24:03 +01:00
Sebastian Dröge
0a12e69024 rtpjitterbuffer: Return 100 if high-level is 0 instead of dividing by zero 2010-02-23 17:20:02 +01:00
Wim Taymans
3a09d334a0 rtpmp4gdepay: avoid division by 0
Avoid a division by 0 when no constantDuration was specified and when out two
timestamps are equal.

Fixes #610265
2010-02-23 12:58:03 +01:00
Wim Taymans
e43839eae9 dvdepay: don't output frames until we have a header
Wait for the complete first 6 header DIF packets before outputting a frame.
Decoders need this info to correctly decode the data.

Fixes #610556
2010-02-23 12:54:36 +01:00
David Hoyt
ad05705afb jpegdec: Fix invalid memory access by first checking and then reading
Fixes bug #610483.
2010-02-22 20:55:29 +01:00
Philippe Normand
3ab666762f pulsesink: gst_pulsesink_get_mute: set result earlier.
In the cases where no buffer was process yet or the index is not
available, get_pulsesink_get_mute() would unconditionally return
FALSE.

https://bugzilla.gnome.org/show_bug.cgi?id=610337
2010-02-22 20:49:03 +01:00
Tim-Philipp Müller
6aade594ac pkgconfig: fix gstreamer-plugins-good uninstalled .pc file
Fix gst-plugins-base reference/requirement. This caused spurious
problems with uninstalled -ugly/-bad not finding -good plugins in
their unit tests (when distchecking).
2010-02-19 12:35:29 +00:00
Tim-Philipp Müller
56a8c9143c 0.10.18.2 pre-release 2010-02-19 12:13:08 +00:00
Tim-Philipp Müller
27569e53e8 Make git ignore shapewipe examples and tests 2010-02-19 12:13:08 +00:00
Tim-Philipp Müller
8c46cce875 flvdemux: minor micro-optimisation
We know these values don't change during the loop, but the compiler
doesn't and has to re-check them for every iteration.
2010-02-19 12:13:08 +00:00
Tim-Philipp Müller
ec9add84a8 flvdemux: remove static keyword from variables that shouldn't be static
Multiple flvparse/flvdemux instances should be able to operate without
trampling over each other by accidentally re-using the same (static)
variables. (Spotted by Mark Nauwelaerts)
2010-02-19 12:13:07 +00:00
Tim-Philipp Müller
07fa73f199 docs: add Since: markers for new jitterbuffer properties 2010-02-19 12:13:07 +00:00
Robert Swain
8d801f41d8 qtdemux: Fix off-by-one logic error in frame rate cap regression commit 2010-02-18 18:20:24 +01:00
Thiago Santos
f1c61e1d84 qtdemux: Use the correct duration when comparing segments
Do not confuse QtDemuxSegments with GstSegments when
comparing the total file duration with the segment duration

Fixes #610296
2010-02-18 07:53:34 -03:00
Robert Swain
2723de585e qtdemux: add durations modulo 1<<32
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.

Fixes #610280
2010-02-17 18:06:29 +01:00
Anders Skargren
6a877b2e6d multipartdemux: improve header mime-type parsing
Make the handing of the mime type within the "boundary" a bit less naive.
The standard for MIME allows parameters to follow the "type" / "subtype"
clause separated from the mime type by ';'.

Modifies the multipartdemuxer's header parsing so it doesnt assume
the whole line after "content-type:" is the mime type and thus makes it a bit
more resilient to finding absurd mime types in the case where parameters are
added.

Fixes #604711
2010-02-16 21:05:24 +01:00
Wim Taymans
a0b651bf5b rtspsrc: avoid stopping NULL tasks
Check the task for NULL, it could be paused and set to NULL before.
2010-02-16 19:54:32 +01:00
Mark Nauwelaerts
d14685eb08 qtdemux: fix ALAC codec-data handling
ALAC codec-data apparently comes in (at least) two flavours (mov, mp4),
so use atom based parsing to retrieve required data, rather than
aiming for a specific offset.

See also #580731.
2010-02-16 16:22:28 +01:00
Mark Nauwelaerts
105d8c925b qtdemux: fix debug message 2010-02-16 16:09:36 +01:00
Mark Nauwelaerts
58d84a993c qtdemux: handle signed values in 3GPP location tag 2010-02-16 16:09:26 +01:00
Mark Nauwelaerts
87e80aab57 rtspsrc: fix typo in debug message 2010-02-16 16:07:21 +01:00
Mark Nauwelaerts
172c0c6a6a avidemux: reset some more stream state after seek
In particular, fixes non-flushing seek.
2010-02-16 15:03:59 +01:00
Robert Swain
e2f5409d40 qtdemux: Fix frame rate cap regression
Look for a non-zero min_duration during initialisation to avoid
incorrect frame rate caps.
2010-02-16 14:44:11 +01:00
Stefan Kost
0134e950fa v4l2: log more details in buffer pool finalize
Helps to align with the loggin from libv4l.
2010-02-16 10:15:22 +02:00
Stefan Kost
f94bfc65a5 v4l2: init datastructures after pre-conditions checks 2010-02-16 10:15:22 +02:00
Stefan Kost
45522aab46 jpegenc: add a fixme for handling other YUV variants 2010-02-16 10:15:22 +02:00
Brian Cameron
a45b351ddf matroska: fix GST_ELEMENT_ERROR usage
Fixes #610053.
2010-02-16 01:40:19 +00:00
Tim-Philipp Müller
3a52d21f95 configure: fix up GST_CXXFLAGS properly
We don't want C specific flags in GST_CXXFLAGS, so base it on the
GST_CFLAGS that only contains the pkg-config CFLAGS but none of
the GST_OPTION_CFLAGS. Also, we only need the local includes once.
Fix typo as well (GST_FLAGS -> GST_CFLAGS).
2010-02-16 00:50:15 +00:00
Stefan Kost
8866c7ca8d configure: base GST_CXXFLAGS on --cflags from pkg-config
pkg-config sets GST_CFLAGS and GST_LIBS. We need to use CFLAGS as a starting
point for for both C and CXX settings.
2010-02-15 23:13:46 +02:00
Wim Taymans
9d40d60960 rtpbin: remove use of ntp_ns_base 2010-02-15 21:36:29 +01:00
Wim Taymans
5a4ecc9da1 rtpbin: remove more ntpnstime and cleanups
Remove some code where we pass ntpnstime around, we can do most things with the
running_time just fine.
Rename a variable in the ArrivalStats struct so that it's clear that this is the
current system time.
2010-02-15 21:36:29 +01:00
Wim Taymans
74241e549f rtpsource: use running_time for jitter
Use the running_time to calculate the jitter instead of the ntp time. Part of
the plan to get rid of ntpnsbase.
2010-02-15 21:36:29 +01:00
Wim Taymans
83cb1aecc8 rtpbin: change how NTP time is calculated in RTCP
Don't calculate the NTP time based on the running_time of the pipeline but from
the systemclock. This allows us to generate more accurate NTP timestamps in case
the systemclock is synchronized with NTP or similar.
2010-02-15 21:36:29 +01:00
Tim-Philipp Müller
2baa107562 v4l2: printf format string fix
The compiler wants a cast here even though the type is already
typedefed as 64-bit integer (presumably because glib has typedefed
guint64 to unsigned long here).
2010-02-15 12:13:43 +00:00
Tim-Philipp Müller
0233257612 matroska: fix printf format string 2010-02-15 10:33:02 +00:00
Tim-Philipp Müller
63c86ac3d8 raw1394, matroska, rtpmanager: remove padding from structures
None of these element and class structures are in public headers,
so don't need padding.
2010-02-15 00:50:10 +00:00
Tim-Philipp Müller
de6483c9f6 po: update for new translator comment 2010-02-15 00:47:11 +00:00
Tim-Philipp Müller
3f2a803c48 pulsesink: add comment for translators for 'x by y' message
Fixes #609724.
2010-02-15 00:45:51 +00:00