Edward Hervey
105737db54
mpegtspacketizer: Fix flushing/sync handling
...
There was a stray adapter_flush() now that we used a temporary buffer
2012-08-14 19:07:58 +02:00
Edward Hervey
121aa3ad13
mpegtspacketizer: Better detect PCR resets
...
Assume that any differences in PCR greater than 15s means there is
a reset in the stream.
2012-08-14 19:07:51 +02:00
Edward Hervey
508e4e7e9f
vp8dec: Call gst_video_decoder_negotiate()
2012-08-14 19:07:47 +02:00
Edward Hervey
54bfdebd9f
schrodec: Call gst_video_decoder_negotiate()
2012-08-14 19:07:43 +02:00
Edward Hervey
3153965658
mpegtspacketizer: Remove/demote some debugging
2012-08-14 19:07:39 +02:00
Edward Hervey
9abedc97ff
tsdemux: Always use current PTS/DTS
...
This avoids setting old PTS and/or DTS
2012-08-14 19:07:33 +02:00
Edward Hervey
e25c2e8e74
mpegtspacketizer: Remove unneeded memset(0)
2012-08-14 19:07:28 +02:00
Edward Hervey
8b80114101
mpegts: Use G_GNUC_INTERNAL
2012-08-14 19:07:24 +02:00
Edward Hervey
28a8ccc0d4
configure.ac: dvb plugin is ported
2012-08-14 19:07:20 +02:00
Edward Hervey
48ae90aff8
dvb: More fixups to 1.0
...
Not tested yet !
Conflicts:
sys/dvb/gstdvbsrc.c
2012-08-14 19:07:06 +02:00
Edward Hervey
7a72c961de
cam: Allow time for CA to initialize
...
Some devices take some time to initialize, and until they are they
will error out when trying to get information about the CA device.
2012-08-14 19:06:30 +02:00
Edward Hervey
25cb359ddb
cam: PMT_REPLY parsing
...
Not used yet
2012-08-14 19:06:25 +02:00
Edward Hervey
dfdbb87813
dvbbasebin: Switch to use tsparse
2012-08-14 19:06:21 +02:00
Edward Hervey
4d4d2f6eb0
mpegtspacketizer: Use gst_structure_*_take_value where applicable
...
Saves copying/freeing data
2012-08-14 19:06:16 +02:00
Edward Hervey
5de6fd1ff8
mpegtspacketizer: Cache the GIConv
...
Avoids having to constantly open/free them (which will end up being
very often with EIT/NIT).
2012-08-14 19:06:11 +02:00
Edward Hervey
e3c0bbe5f6
mpegtbase: reset element in READY=>PAUSED
...
Ensures all subclass reset vmethods are called
2012-08-14 19:06:04 +02:00
Edward Hervey
b1295aef14
mpegtspacketizer: Use more Quarks
2012-08-14 19:05:58 +02:00
Edward Hervey
d54624aa49
tsdemux: Remove useless code
...
PCR/OPCR is meant to be handled by the packetizer
2012-08-14 19:05:52 +02:00
Edward Hervey
4f55cc12ae
tsdemux: Calculate pcr/time/offset separately per program
...
Avoids quite a few issues with multi-program streams
2012-08-14 19:05:48 +02:00
Edward Hervey
a8d1e88bda
tsparse: Push out buffer on main source pad
2012-08-14 19:05:44 +02:00
Edward Hervey
558beab1b4
mpegtbase: vmethod to notify when we're done processing input
...
This can be used to notify subclasses no more data is expected this
round.
tsparse will use it to push whole buffers (without copy) on the main
source pad.
It could also be used later to decide whether to push pending data
in order to reduce latency.
2012-08-14 19:05:37 +02:00
Fabrizio (Misto) Milo
fe5cf525e1
dvbsrc + dvb api buffer property to overcome buffer under reads
2012-08-14 19:05:32 +02:00
Edward Hervey
c4ccca8795
soundtouch: Don't assume output buffer timestamps
...
There's no guarantee whatsoever that the first buffer to output will
start at the segment.start.
Instead, wait for the first buffer after a segment, and use that timestamp
2012-08-14 19:04:42 +02:00
Sebastian Dröge
c6b16aed08
vp8dec: Add support for multiple decoding threads
2012-08-14 11:17:25 +02:00
Sebastian Dröge
14317a3408
vp8dec: Add support for the MFQE postprocessing flag
...
Which is enabled by default if postprocessing is enabled.
2012-08-14 11:09:46 +02:00
Wim Taymans
a9f46ed059
mpegvideoparse: only apply repeat count when set
...
When there is no extension header, the repeat_count variable is left to 0 and
then the duration on the output buffers is calculated wrongly. Because the
duration is used to interpolate output timestamps, the output timestamps are
also wrong, causing bad framerates.
See https://bugzilla.gnome.org/show_bug.cgi?id=681535
2012-08-13 10:58:50 +02:00
Sebastian Dröge
85e45a09e2
vp8: Use pkg-config file for getting the LIBS and CFLAGS
2012-08-09 13:37:22 +02:00
Sebastian Dröge
7369d28e1f
mpg123: Give MARGINAL rank to the mpg123 decoder element
2012-08-09 11:48:39 +02:00
Sebastian Dröge
abfa30a42b
gst: Set alignment at the correct place of GstAllocationParams
2012-08-08 17:41:42 +02:00
Sebastian Dröge
880359f32b
vp8enc: Update the per-component strides for every frame too
...
This is necessary because of GstVideoAlignment
2012-08-08 17:41:42 +02:00
Tim-Philipp Müller
969572f9e5
Back to development
2012-08-08 16:35:12 +01:00
Tim-Philipp Müller
2cd52450f2
Release 0.11.93
2012-08-08 15:32:19 +01:00
Tim-Philipp Müller
7960591c01
mpg123: dist header file
2012-08-08 12:58:50 +01:00
Tim-Philipp Müller
42e0ace84b
win32: update for photography API changes
2012-08-08 12:13:13 +01:00
Tim-Philipp Müller
330b432044
tests: .gitignore new curlsmtpsink test binary
2012-08-08 11:53:05 +01:00
Olivier Crête
bc6b513620
mimic: Port to 0.11
2012-08-07 15:41:25 -07:00
Andoni Morales Alastruey
a3519d59ef
winks: add missing default switch case
2012-08-07 19:05:10 +02:00
Andoni Morales Alastruey
71c1a0e999
winks: fix types
2012-08-07 19:05:04 +02:00
Andoni Morales Alastruey
97a95c9cba
winks: fix format warnings
2012-08-07 19:05:00 +02:00
Andoni Morales Alastruey
64f77b2f84
winks: fix unused variables warnings
2012-08-07 19:04:55 +02:00
Andoni Morales Alastruey
4120cfa43f
winks: don't reinitialize MEDIASUBTYPE_I420
2012-08-07 19:04:50 +02:00
Andoni Morales Alastruey
ffb40074cd
winks: define STATIC_KSPROPSETID_Wave_Queued if not defined
2012-08-07 19:04:42 +02:00
Andoni Morales Alastruey
544840ff38
winks: integrate build with autotools
2012-08-07 19:04:36 +02:00
Andoni Morales Alastruey
a55786274d
d3dvideosink: avoid duplicated symbols in static links
...
Rename the DLL entry point the avoid duplicated symbols in static
links.
2012-08-07 19:04:01 +02:00
Andoni Morales Alastruey
beea4bd161
d3dvideosink: avoid duplicated symbols in static links
...
Rename the DLL entry point the avoid duplicated symbols in static
links.
2012-08-06 14:37:36 +02:00
Sebastian Dröge
bdc46898de
gst: Add stream-id to stream-start events
2012-08-06 14:05:08 +02:00
Oleksij Rempel
94337d05a5
vp8enc: initiate encoder to fix a crash.
...
Without this patch vp8enc send header before and after first
key frame. On second keyframe vp8dec will crash without getting
decoded frame. With this pipe it is easy to reproduce this issue:
gst-launch-1.0 videotestsrc ! vp8enc ! vp8dec ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=680667
2012-08-05 19:35:32 +01:00
Tim-Philipp Müller
f10875fc72
Automatic update of common submodule
...
From 94ccf4c to 668acee
2012-08-05 16:40:28 +01:00
Tim-Philipp Müller
489b102a43
gst_tag_list_free -> gst_tag_list_unref
2012-08-04 16:31:30 +01:00
Patricia Muscalu
a7037cd0e3
curl: fixed some memory leaks in the plugin and the unit tests
...
https://bugzilla.gnome.org/show_bug.cgi?id=681117
https://bugzilla.gnome.org/show_bug.cgi?id=681115
2012-08-03 20:28:40 +01:00