Commit graph

1459 commits

Author SHA1 Message Date
Sebastian Dröge
0f43e801f2 uridecodebin: Ignore missing-plugin messages unless all decodebins post one
When playing RTSP streams there will be one decodebin per stream. If some of
them fail because of a missing plugin we should not fail completely but play
the supported streams at least.

https://bugzilla.gnome.org/show_bug.cgi?id=730868
2014-06-04 17:00:43 +02:00
Sebastian Dröge
393f090197 decodebin: Do async-done on expose errors too 2014-06-04 17:00:43 +02:00
Thiago Santos
783195ccef decodebin: aggregate buffering messages
Aggregate buffering messages to only post the lower value
to avoid setting pipeline to playing while any multiqueue
is still buffering.

There are 3 scenarios where the entries should be removed from
the list:

1) When decodebin is set to READY
2) When an element posts a 100% buffering (already implemented)
3) When a multiqueue is removed from decodebin.

For item 3 we don't need to handle it because this should only
happen when either 1 is hapenning or when it is playing a
chained file, for which number 2 should have happened for the
previous stream to finish

https://bugzilla.gnome.org/show_bug.cgi?id=726423
2014-05-29 18:59:30 -03:00
Sebastian Dröge
0760fe8625 playsink: Always take the playsink lock when adding or removing pad probes
Otherwise we might end up inside the callback without having stored
the probe id... then try to remove that probe (not!) from the callback
and wait forever for the pad to unblock.
2014-05-20 09:51:07 +02:00
Wim Taymans
0e8b47443e uridecodebin: use downloadbuffer for download buffering
Use the new downloadbuffer element to implement the download buffering
feature

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=680183
2014-05-08 17:12:54 +02:00
Sebastian Dröge
0d87f8fdb2 playbin: Don't block on non-serialized events
https://bugzilla.gnome.org/show_bug.cgi?id=729321
2014-05-01 13:18:11 +02:00
Sebastian Dröge
4d062b230a playsink: Don't block on non-serialized events
https://bugzilla.gnome.org/show_bug.cgi?id=729321
2014-05-01 13:18:10 +02:00
Sebastian Dröge
67289fd184 playsinkconvertbin: Don't block on non-serialized events
https://bugzilla.gnome.org/show_bug.cgi?id=729321
2014-05-01 13:18:10 +02:00
Sebastian Dröge
ab0e37c320 subtitleoverlay: Don't block on non-serialized events
https://bugzilla.gnome.org/show_bug.cgi?id=729321
2014-05-01 13:18:10 +02:00
Tim-Philipp Müller
184fe464da playbin: add nick for soft colorbalance play flag to fix gst-inspect
Fix gst-inspect-1.0 playbin criticals when printing the
flags, which was caused by a missing nick name for one
of the flags.
2014-04-27 00:26:14 +01:00
Tim-Philipp Müller
bcb8068e27 docs: remove outdated and pointless 'Last reviewed' lines from docs
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
2014-04-26 23:28:57 +01:00
Vincent Penquerc'h
9e99a1ca41 decodebin: consider "no demuxer" case to not have dynamic pads
This fixes a possible NULL dereference.

Coverity 1195146
2014-04-10 13:51:18 +01:00
Sebastian Dröge
2c2e286c38 decodebin: In adaptive streaming mode, only have a fixed buffer limit for the non-buffering multiqueue 2014-04-09 16:06:06 +02:00
Jan Schmidt
968e28a818 subtitleoverlay: Consider all caps for overlays, not just the first.
Check all supported caps on the overlay video pad, not just the
first of (possibly) many.
2014-04-06 22:28:27 +10:00
Jan Schmidt
98482c3a0e playbin: Drop reference to any source element in NULL state
Drop the reference instead of waiting for either finalize(), or
for a new source when reused. Everyone else already forgot about
the old source.
2014-04-04 02:15:53 +11:00
Arun Raghavan
f4cab18ec1 playback: Add video-/audio-filter properties
This provides an audio-filter and video-filter property to allow
applications to set filter elements/bins. The idea is that these will
e
applied if possible -- for non-raw sinks, the filters will be skipped.

If the application wishes to force the application of the filters, this
can be done by setting the new flag introduced on playsink -
GST_PLAY_FLAG_FORCE_FILTERS.

https://bugzilla.gnome.org/show_bug.cgi?id=679031
2014-03-16 18:38:29 +01:00
Sebastian Dröge
1bda077374 Revert "playback: Add video-/audio-filter properties"
This reverts commit fb8fdedb4f.
2014-03-16 18:38:25 +01:00
Arun Raghavan
fb8fdedb4f playback: Add video-/audio-filter properties
This provides an audio-filter and video-filter property to allow
applications to set filter elements/bins. The idea is that these will be
applied if possible -- for non-raw sinks, the filters will be skipped.

If the application wishes to force the application of the filters, this
can be done by setting the new flag introduced on playsink -
GST_PLAY_FLAG_FORCE_FILTERS.

https://bugzilla.gnome.org/show_bug.cgi?id=679031
2014-03-16 18:35:57 +01:00
Arun Raghavan
bfb78cee42 playsink: Fix documentation for what the audio chain looks like
https://bugzilla.gnome.org/show_bug.cgi?id=679031
2014-03-16 11:02:43 +01:00
Sebastian Dröge
5e364c1d7b decodebin: Buffer up to 5 seconds in multiqueue buffering mode
2 seconds might be too small for some container formats, e.g.
MPEGTS with some video codec and AAC/ADTS audio with 700ms
long buffers. The video branch of multiqueue can run full while
the audio branch is completely empty, especially because there
are usually more queues downstream on the audio branch.
2014-03-07 17:09:24 +01:00
Sebastian Dröge
539eaf73e5 decodebin: Keep the number of buffers after an adaptive streaming demuxer lower
Usually these buffers are multiple seconds large, and having a maximum
of 5 buffers in the multiqueue there can use a lot of memory. Lower
this to 2 for adaptive streaming demuxers.
2014-03-06 22:45:30 +01:00
Sebastian Dröge
274b4eb870 decodebin: Simplify adaptive streaming demuxer code a bit 2014-03-06 22:45:30 +01:00
Matthieu Bouron
45dfceacdb playbin: improve autoplug_query_caps return
Makes autoplug_query_caps return
downstream_caps + intersect_first(filter_caps, element_caps)

https://bugzilla.gnome.org/show_bug.cgi?id=724828
2014-02-27 21:23:12 +01:00
Matthieu Bouron
5c1167a2c7 playsinkconvertbin: improve gst_play_sink_convert_bin_getcaps return
If we have the peer caps and a caps filter, return peer_caps +
intersect_first (filter, converter_caps) instead of
intersect_first (filter, peer_caps + converter_caps) and preservers
downstream caps preference order.

https://bugzilla.gnome.org/show_bug.cgi?id=724893
2014-02-26 09:35:04 +01:00
Sebastian Dröge
2df1e56bb7 decodebin: If we have a demuxer without dynamic srcpads, just assume no-more-pads
Otherwise we will wait until the multiqueue after the demuxer will
overrun, which is clearly not needed then.
2014-02-23 00:10:01 +01:00
Sebastian Dröge
f149c27a61 decodebin: Also make sure to not duplicate an element factory after a group
If we are using an adaptive stream demuxer, which outputs a non-container
stream, we are putting another multiqueue after the *parser* following
the adaptive stream demuxer. We do not want to add another instance of
the same parser right after this multiqueue.
2014-02-23 00:10:01 +01:00
Sebastian Dröge
41117606dd decodebin: During pre-rolling always use the auto-preroll limits on multiqueues
Even if we're buffering in the multiqueues.
2014-02-23 00:10:01 +01:00
Sebastian Dröge
2d2aa02b77 decodebin: Pass through the seekability information when setting multiqueue limits 2014-02-23 00:10:01 +01:00
Sebastian Dröge
db771185ed decodebin: During exposing of pads don't set the multiqueue limits multiple times to different values
Instead just set them once in the very end to the correct values.
2014-02-23 00:10:01 +01:00
Sebastian Dröge
c4caeb73ce decodebin: Only enable multiqueue buffering once we're pre-rolled
Otherwise we will emit buffering messages not just from the last
multiqueue but also from previous multiqueues... confusing the
application with different percentages during pre-rolling.
2014-02-23 00:10:01 +01:00
Sebastian Dröge
4f32010916 decodebin: Make sure that we always have a second multiqueue for adaptive streaming demuxers
For adaptive streaming demuxer we insert a multiqueue after
this demuxer. This multiqueue will get one fragment per buffer.
Now for the case where we have a container stream inside these
buffers, another demuxer will be plugged and after this second
demuxer there will be a second multiqueue. This second multiqueue
will get smaller buffers and will be the one emitting buffering
messages.
If we don't have a container stream inside the fragment buffers,
we'll insert a multiqueue below right after the next element after
the adaptive streaming demuxer. This is going to be a parser or
decoder, and will output smaller buffers.
2014-02-23 00:10:00 +01:00
Sebastian Dröge
ad51b38b7c uridecodebin: Always use buffering in multiqueue for adaptive streams 2014-02-23 00:10:00 +01:00
Sebastian Dröge
a2837a22a5 uridecodebin: Only add a queue2 for buffering for non-adaptive streaming streams 2014-02-23 00:10:00 +01:00
Thiago Santos
89c9e23bfe uridecodebin: pass on the buffering property for adaptive streams
Adaptive streams should download its data inside the demuxer, so
we want to use multiqueue's buffering messages to control the
pipeline flow and avoid losing sync if download rates are low;

https://bugzilla.gnome.org/show_bug.cgi?id=707636
2014-02-23 00:10:00 +01:00
Sebastian Dröge
a5918b0ab5 playbin: Keep inputselector around until we release its pads
Otherwise there's an interesting race condition when we destroy
the inputselector (actually it will be destroyed later when its state
change message gets destroyed) and afterwards release its sinkpad.

This is the code path when the last channel is removed from the
input selector.

Gave this warning sometimes, for chained oggs or whenever else
we change decode groups:
GStreamer-CRITICAL **: Padname '':sink_0 does not belong to element inputselector0 when removing
2014-02-18 15:06:25 +01:00
Sebastian Dröge
4dd30bbd16 playsink: Only remove the complete text chain if the text pad goes away
If the text pads does not go away we just set the overlay to silent, which
allows us to immediately re-enable subs later again. However before this
change we also released the streamsynchronizer text pads, which deadlocked
because there was still dataflow going on. Just do this only if we remove
the complete chain.

https://bugzilla.gnome.org/show_bug.cgi?id=683504
2014-02-16 15:35:31 +01:00
Sebastian Dröge
2ddc07e93e uridecodebin: Don't leak pad references 2014-02-12 17:34:32 +01:00
Sebastian Dröge
a02678057e playbin: First try to get the pad's current caps, then query caps
The caps query might give us ANY caps while the pad has fixed caps
configured currently.
2014-02-11 16:36:20 +01:00
Sebastian Dröge
57295753d5 playbin: Fix memory leak in autoplugging code
We should not leak element factories ideally.
2014-02-10 16:33:50 +01:00
Sebastian Dröge
c91a4af9ab subtitleoverlay: Remove unused function 2014-02-09 23:17:03 +01:00
Alessandro Decina
6a699b6c40 decodebin: make it possible to register multiple handlers for autoplug-select
Change the way autoplug-select is accumulated so that it's possible to have
multiple handlers. The handlers keep getting called as long as they keep
returning GST_AUTOPLUG_SELECT_TRY.

One practical example of when this is needed is when hooking into playbin's
uridecodebin, which is perhaps not very elegant but the only way to influence
which streams playbin autoplugs/exposes.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=723096
2014-01-28 13:45:07 +11:00
Sjoerd Simons
43237ad0e2 uridecodebin: Drop hardcoded list of media suitable for download buffering
Discussion on IRC indicated that the main reason for this list was to
prevent demuxers that can trigger a lot of seeking from using
progressive buffering using queue2 (which due to being seekable triggers
that behaviour).

However given that upstream can indicate seeks are possible but should
be avoided via a scheduling query, this extra whitelisting shouldn't be
necessary for well-behaved demuxers.

https://bugzilla.gnome.org/show_bug.cgi?id=704933
2014-01-24 22:34:51 +01:00
Wonchul Lee
c2746d753e playbin: Remove unnecessary assignment
Remove duplicated assignment

https://bugzilla.gnome.org/show_bug.cgi?id=722491
2014-01-18 13:33:57 +01:00
Sebastian Dröge
4f8f5918be playbin: Insert decoders without GstAVElement information between the other decoders
Otherwise they would be preferred over all decoders independent
of their ranks.

https://bugzilla.gnome.org/show_bug.cgi?id=722316
2014-01-18 13:33:57 +01:00
Sebastian Dröge
6b46019abf playbin: Only put parsers and sinks first, not all non-decoders
https://bugzilla.gnome.org/show_bug.cgi?id=722316
2014-01-18 13:33:57 +01:00
Matthieu Bouron
98e0dec715 playback: add ANY caps features to default audio/video raw caps
Allows elements using audio/video caps features to be used by playbin.
2013-12-30 11:25:49 +01:00
Wim Taymans
6db3b535eb uridecodebin: copy sticky events 2013-11-29 17:30:09 +01:00
Wim Taymans
a7151d0b3e decodebin2: copy sticky events 2013-11-29 17:26:13 +01:00
Wim Taymans
65e492a403 decodebin2: activate ghost pad before targetting
Activate the decodebin2 pad before setting the target. This makes sure
that the events are copied.
2013-11-28 11:27:23 +01:00
Sebastian Dröge
0e9806a03e playsink: Fix visualizations if no visualization plugin was set
https://bugzilla.gnome.org/show_bug.cgi?id=712280
2013-11-26 12:03:24 +01:00