This is needed for cross-compiling without a build machine compiler
available. The option was added in 0.54, but we only need this in
Cerbero and it doesn't affect older versions so it should be ok.
Will only cause a spurious warning.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1266>
Instead of storing the raw cc_data, store the 2 cea608 fields individually
as well as the ccp data.
Simply copying the input cc_data to the output cc_data violates a number of
requirements in the cea708 specification. The most prominent being, that
cea608 triples must be placed at the beginning of each cdp.
We also need to comply with the framerate-dpendent limits for both the
cea608 and the ccp data which may involve splitting or merging some
cea608 data but not ccp data or vice versa.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1116>
Add some properties to allow TCP and UDP candidates to be toggled. This
is useful in cases where someone is using this element in an environment
where it is known in advance whether a given transport will work or not
and will prevent wasting time generating and checking candidate pairs
that will not succeed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1223>
When negotiating the SDP we should only connect the streams that are
actually mentioned in the SDP. All other streams are not relevant at
this time and would likely be part of a future SDP update. Fixes a
couple of the renegotiation webrtc unit tests.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
Proper calculate running time for buffers that are out of current
segment and try to honor them.
A typical case is for AVTP packets coming from avtpcvfpay element, as
those may have DTS that falls out of segment (which is about PTS).
By using gst_segment_to_running_time_full(), avtpsink can properly
calculate when to transmit those buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
Seek events will cause new segments to be sent to avtpcvfpay, and for
flushing seeks, a pipeline running time reset. This running time
reset, which effectively changes pipeline base time, will cause
avtpcvfpay element to generate incorrect DTS for the initial set of
buffers sent after FLUSH_STOP.
This happens due the fact that base time change happens only when the
sink gets the first buffer after the FLUSH_STOP - so avtpcvfpay used
the wrong base time to do its calculations.
However, if the pipeline is paused before the seek, sink will update
base time when pipeline state goes to PLAYING again, before avtpcvfpay
gets the first buffers after the flush. Then avtpcvfpay element will be
able to normally calculate DTS for the outgoing packets.
This patch simply adds a warning message in case a flushing seek is
performed on a playing pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
TSN streams are expected to send packets to the network in a well
defined "pace", which is arbitrarily defined for each stream. This pace
is defined by the "measurement interval" property of a stream.
When the AVTP CVF payloader element - avtpcvfpay - fragments a video
frame that is too big to be sent to the network, it currently defines
that all fragments should be transmitted at the same time (via DTS
property of GstBuffers generated, as sink will use those to time the
transmission of the AVTPDU). This doesn't comply with stream definition,
which also has a limit on how many packets can be sent on a given
measurement interval.
This patch solves that by spreading in time the DTS of the GstBuffers
containing the AVTPDUs. Two new properties, "measurement-interval" and
"max-interval-frames", added to avptcvfpay element so that it knows
stream measurement interval and how many AVTPDUs it can send on any of
them. More details on the method used to proper spread DTS/PTS according
to measurement interval can be found in a code commentary inside this patch.
Tests also added for the new property and behaviour.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
If the remote is bundling, but we are not and remote is offering.
we cannot put the remote media sections into a bundled transport as that
is not how we are going to respond.
This specific failure case was that the remote ICE credentials were
never set on the ice stream and so ice connectivity would fail.
Technically, this whole bunde-policy=none handling should be removed
eventually when we implement bundle-policy=balanced. Until such time,
we have this workaround.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1231>
This commit introduces the AVTP Clock Reference Format (CRF) Checker
element. This element re-uses the GstAvtpCrfBase class introduced along
with the CRF Synchronizer element.
This element will typically be used along with the avtpsrc element to
ensure that the AVTP timestamp (and H264 timestamp in case of CVF-H264
packets) is "aligned" with the incoming CRF stream. Here, "aligned" means
that the timestamp value should be within 25% of the period of the media
clock recovered from the CRF stream.
The user can also set an option (drop-invalid) in order to drop any packet
whose timestamp is not within the thresholds of the incoming CRF stream.
This commit introduces the AVTP Clock Reference Format (CRF) Synchronizer
element. This element implements the AVTP CRF Listener as described in IEEE
1722-2016 Section 10.
CRF is useful in synchronizing events within different systems by
distributing a common clock. This is useful in a scenario where there are
multiple talkers who are sending data to a single listener which is
processing that data. E.g. CCTV cameras on a network sending AVTP video
streams to a base station to display on the same screen.
It is assumed that all the systems are already time-synchronized with each
other. So, the AVTP Talker essentially adjusts the AVTP Presentation Time
so it's phase-locked with the reference clock provided by the CRF stream.
There are 2 different roles of systems which participate in CRF data
exchange. A system can either be a CRF Talker, which samples it's own
clock and generates a stream of timestamps to transmit over the network, or
a CRF Listener, the system which receives the generated timestamps and
recovers the media clock from the timestamps. It then adjusts it's own
clock to align with recovered media clock. The timestamps generated by the
talker may not be continuous and the listener might have to interpolate
some timestamps to recover the media clock. The number of timestamps to
interpolate is mentioned in the CRF stream AVTPDU (Refer IEEE 1722-2016
Section 10.4 for AVTPDU structure). Only CRF Listener has been implemented
in this commit.
The CRF Sync element will create a separate thread to listen for the CRF
stream. This thread will calculate and store the average period of the
recovered media clock. The pipeline thread will use this stored period
along with the first timestamp of the latest CRF AVTPDU received to
calculate adjustment for timestamps in the audio/video streams. In case of
CRF AVTPDUs with single timestamp, two consecutive CRF AVTPDUs will be used
to figure out the average period of the recovered media clock.
In case of H264 streams, both AVTP timestamp and H264 timestamp will be
adjusted.
In the future commits, another "CRF Checker" element will be introduced
which will validate the timestamps on the AVTP Listener side. Which is why
a lot of code has been implemented as part of the gstcrfbase class.
If we are in a state where we are answering, we would start gathering
when the offer is set which is incorrect for at least two reasons.
1. Sending ICE candidates before sending an answer is a hard error in
all of the major browsers and will fail the negotiation.
2. If libnice ever adds the username fragment to the candidate for
ice-restart hardening, the ice username and fragment would be
incorrect.
JSEP also hints that the right call flow is to only start gathering when
a local description is set in 4.1.9 setLocalDescription
"This API indirectly controls the candidate gathering process."
as well as hints throughout other sections.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1226>
