Commit graph

77 commits

Author SHA1 Message Date
Nicolas Dufresne
7df99f7469 v4l2videodec: Handle flush while in start_streaming
We need to handle the case where a flush occure while the streaming
thread is being brought up. In this case, the flushing state of the poll
object is cleared. To solve this, we simply set the capture poll to flushing
again, this way we know the thread will exit. The decoder streamlock
is used to synchronize with handle frame.
2014-05-16 21:49:00 -04:00
Nicolas Dufresne
077fcbcf15 v4l2: Cleanup M2M properties
M2M devices were sharing the same properties as src and sink. Most of
these made no sense. This patch reduces the number of propeties and
makes io-mode clearer by having capture-io-mode and output-io-mode. This
also accidently fixed a bug in gstv4l2transform io-mode code, where the
capture io-mode could not be set.

https://bugzilla.gnome.org/show_bug.cgi?id=729591
2014-05-15 19:06:52 -04:00
Nicolas Dufresne
541a9670d2 v4l2videodec: Handle start_streaming error
https://bugzilla.gnome.org/show_bug.cgi?id=730207
2014-05-15 12:22:04 -04:00
Nicolas Dufresne
bff156bc57 v4l2videodec: Print the flow return causing the loop to leave
https://bugzilla.gnome.org/show_bug.cgi?id=730207
2014-05-15 12:21:59 -04:00
Nicolas Dufresne
f384047be3 v4l2videodec: Don't lock the decoder when stopping task
That src pad task may need to take the lock when being pulled
down. takeing that lock can lead to a deadlock.

https://bugzilla.gnome.org/show_bug.cgi?id=730207
2014-05-15 12:21:54 -04:00
Nicolas Dufresne
a4b5811d22 v4l2: Split flush in start/stop_streaming
This allow calling start streaming later for capture device. Currently it breaks
in dmabuf-import because downstream is holding a buffer that will only be
released after stream-start.

https://bugzilla.gnome.org/show_bug.cgi?id=730207
2014-05-15 12:21:44 -04:00
Nicolas Dufresne
82a806e63b v4l2: Replace miss-use of crop meta in favour of proper offset
This moves away from copying information and store everything inside
the GstVideoInfo structure. The alignement exposed by v4l2 api
is now handled using proper offset.
2014-05-08 15:56:37 -04:00
Nicolas Dufresne
815c9b7d35 v4l2bufferpool: Acquire cannot return a buffer from another pool
Return a buffer from an otherpool has unwanted side effects that lead to leaks and
prevents deactivating the pool. Instead, we change the _process() API so it can
replace the internal buffer with the buffer from the downstream pool. This implied
moving from _fill() to _create() method in the src.
2014-05-08 15:56:37 -04:00
Nicolas Dufresne
a89986ebd5 v4l2videodec: Ensure pool is configured 2014-05-08 15:56:36 -04:00
Nicolas Dufresne
cf788c9ec7 v4l2videodec: Install PROP_CAPTURE_IO_MODE with right ID 2014-05-08 15:56:36 -04:00
Nicolas Dufresne
8d6e72a299 v4l2: Move capture eos handling in _process()
Now that we might be copying out buffer (e.g. downstream don't support video
meta bug we need it) we need to move the EOS handling inside the process
method.
2014-05-08 15:56:35 -04:00
Nicolas Dufresne
a6a8c2b5eb v4l2videodec: Cleanly fail if set_format is never called 2014-05-08 15:56:35 -04:00
Nicolas Dufresne
e9eba56cd3 v4l2videodec: Ensure internal pool are activated 2014-05-08 15:56:35 -04:00
Nicolas Dufresne
a8024fef04 v4l2videodec: Check that pool where allocated before flushing them
Upon error, the pools might not have been allocated yet, hence we should not
try and flush them (even though we still want to make sure the processing thread
is fully stopped).
2014-05-08 15:56:35 -04:00
Nicolas Dufresne
70e7868f18 v4l2object: Rename setup_format() method into acquire_format()
The setup_format() was confusing since it does not set anything, in fact
it reads the setup from the driver and save it.
2014-05-08 15:56:35 -04:00
Nicolas Dufresne
b4d89b9809 v4l2videodec: Protect NULL pool while going to READY
When the pipeline fails early, the pool might be unset before the processing
thread has run once. Add protection against that.
2014-05-08 15:56:35 -04:00
Nicolas Dufresne
7e379e8fff v4l2videodec: Clear the input state pointer after unref
If caps are set again, we have a risk od returning from set_format with a
input_state pointing to dead memory. Clearing the pointer after unref fix
this issue.
2014-05-08 15:56:35 -04:00
Nicolas Dufresne
7101c4341a v4l2videodec: handle stop being called without flush
Uppon certain downstream error, stop() is called without a flush(). This mean that
the streaming thread may still be running even though unlock has been called.
Now calling flush to reset the decoder state if we are processing.
2014-05-08 15:56:35 -04:00
Nicolas Dufresne
fb852669de v4l2videodec: Default to template in caps query 2014-05-08 15:56:35 -04:00
Nicolas Dufresne
27a617d75f v4l2videodec: Ensure processing thread has stopped when draining 2014-05-08 15:56:35 -04:00
Nicolas Dufresne
6f48c74f2a v4l2videodec: Don't drain if processing thread is inactive 2014-05-08 15:56:35 -04:00
Nicolas Dufresne
aa74871080 v4l2: Use single pass iterator for M2M probe
Instead of having each M2M class do their own probing, use the
GstV4l2Iterator and probe all devices in a single pass.

https://bugzilla.gnome.org/show_bug.cgi?id=727925
2014-05-03 23:11:35 -04:00
Nicolas Dufresne
f7d34bd237 v4l2videodec: Simplify sub-instanciation mechanism
Simplify sub-instanciation by defining an absract type and using subtype
class and instance init callback. This also fixes a bug where the template
pads get initialized too late.

https://bugzilla.gnome.org/show_bug.cgi?id=727925
2014-05-03 23:11:34 -04:00
Sebastian Dröge
ab02b1db6c v4l2videodec: Initialise ioctl struct with zeroes before passing it to ioctl() 2014-04-16 17:23:52 +02:00
Benjamin Gaignard
2a870d7d9b v4l2videodec: Create one element per device
For each videoCdevice probe it input/output capabilities
if it match with video decoder requirement register a new element.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

https://bugzilla.gnome.org/show_bug.cgi?id=722128
2014-02-25 14:29:10 -05:00
Nicolas Dufresne
bd51c37196 v4l2videodec: Calculate latency from device information
Decoders or other devices that expose a minimum buffers required produce
an first output. We use this information to calculate latency.

https://bugzilla.gnome.org/show_bug.cgi?id=722128
2014-02-25 14:29:10 -05:00
Nicolas Dufresne
61183670c0 v4l2videodec: Implement v4l2videodec
Implement an element that can driver V4L2 M2M decoder device.

https://bugzilla.gnome.org/show_bug.cgi?id=722128
2014-02-25 14:29:10 -05:00