Commit graph

1368 commits

Author SHA1 Message Date
Matthew Waters
640a65bf96 gst: don't use volatile to mean atomic
volatile is not sufficient to provide atomic guarantees and real atomics
should be used instead.  GCC 11 has started warning about using volatile
with atomic operations.

https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1719

Discovered in https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/868

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2098>
2021-03-22 14:34:36 +11:00
Matthew Waters
e463bcfadf tests/webrtc: check for more sdp things across the board
e.g.

- test for a=setup:$val and direction attributes in all tests
- test number of media sections
- test number of formats in each m= section (for audio/video)
- test no duplicate formats

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2093>
2021-03-19 18:02:21 +11:00
Mathieu Duponchelle
08442cc792 cccombiner: implement scheduling
Prior to that, cccombiner's behaviour was essentially that of
a funnel: it strictly looked at input timestamps to associate
together video and caption buffers.

This patch instead exposes a "schedule" property, with a default
of TRUE, to control whether caption buffers should be smoothly
scheduled, in order to have exactly one per output video buffer.

This can involve rewriting input captions, for example when the
input is CDP sequence counters are rewritten, time codes are dropped
and potentially re-injected if the input video frame had a time code
meta.

Caption buffers may also get split up in order to assign captions to
the correct field when the input is interlaced.

This can also imply that the input will drift from synchronization,
when there isn't enough padding in the input stream to catch up. In
that case the element will start dropping old caption buffers once
the number of buffers in its internal queue reaches a certain limit
(configurable).

The property is exposed so that existing users of cccombiner can
revert back to the original behaviour, but should eventually be
removed, as that behaviour was simply inadequate.

This commit also disallows changing the input caption type, as
this would needlessly complicate implementation, and removes
the corresponding test.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2076>
2021-03-17 22:00:25 +00:00
Stéphane Cerveau
451c875d40 zxing: update to support version 1.1.1
Support new API in 1.1.1
Update the supported input video format.
Update tests to use parse_launch

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2037>
2021-03-12 01:03:49 +00:00
Philippe Normand
fae7c8dd7e play: tests: Switch user-agent test to a real HTTP server
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2061>
2021-03-09 18:03:48 +00:00
Philippe Normand
3eec2f4be8 play: tests: Refactor to use new Message bus API
Instead of relying on an extra GMainLoop, the messages are poped from the player
bus and handled synchronously. This should avoid flaky behaviors.

Fixes #608

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2061>
2021-03-09 18:03:48 +00:00
Matthew Waters
2bed220771 webrtc: don't generate duplicate rtx payloads when bundle-policy is set
It was possible to generate a SDP that had an RTX payload type
that matched one of the media payload types when providing caps via
codec_preferences without any sink pads.

Fixes

m=video 9 UDP/TLS/RTP/SAVPF 96
...
a=rtpmap:96 VP8/90000
a=rtcp-fb:96 nack pli
a=fmtp:96 apt=96

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2046>
2021-03-09 02:22:35 +00:00
Vivia Nikolaidou
4ccad5336f tests: Add negotiation tests for the interlace elements
Many complicated cases exist. Would be good to have some checks.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2062>
2021-03-08 21:02:13 +02:00
Ilya Kreymer
92626535c7 webrtc ice: Add 'min/max-rtp-port' props for setting RTP port range
default min port == 0, max port == 65535 -- if min port == 0, uses existing random port selection (range ignored)
add 'gathering_started' flag to avoid changing ports after gathering has started
validity checks: min port <= max port enforced, error thrown otherwise
include tests to ensure port range is being utilized (by @hhardy)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/119>
2021-03-01 14:42:17 +00:00
Michael Olbrich
5a03862fca h264parse: don't invalidate the last PPS when parsing a new SPS
When a SPS is received then any previous PPS remains valid. So don't clear
the PPS flag from the parser state.

This is important because there are encoders that don't generated a PPS after
every SPS.

Closes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/571

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2019>
2021-02-17 16:22:18 +00:00
He Junyan
be7a9e29df test: Add more test cases for the av1parse obu aligned output.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1979>
2021-01-26 12:22:31 +00:00
He Junyan
3e82c1f88e test: Add test cases for av1parse element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1614>
2021-01-19 18:38:03 +00:00
Seungha Yang
d1e7290109 d3d11: Add support for packed 4:2:2 and 4:4:4 10bits formats
Add support for Y210 and Y410 formats which are commonly used format
for en/decoders on Windows. Note that those formats cannot be used for
render target (output) of shader.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1821>
2020-11-20 02:28:54 +09:00
He Junyan
12af439c58 test: av1parser: update the test result because of bug fixing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1464>
2020-11-17 19:31:09 +00:00
Jan Schmidt
be131dba6a tests: Don't set dtlsenc state before linking.
Link the dtlsenc in the testsuite before setting it to paused, as it
starts a pad task that can generate a not-linked error otherwise.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1744>
2020-10-31 21:46:16 +11:00
Jan Schmidt
c1be9c53e1 dtls: Catch bus errors and fail instead of hanging.
If the DTLS elements fail, they post a bus error and don't signal any
key negotiation. Catch the bus error and fail the test early instead
of letting it hang and time out.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1741>
2020-10-31 01:47:06 +00:00
Seungha Yang
f62ecc1625 tests: Add CUDA filter unit tests
Adding a test for buffer meta and colorspace conversion

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1633>
2020-10-16 15:56:49 +00:00
Jan Alexander Steffens (heftig)
3ea6387f96 tests: svthevcenc: Fix test_encode_simple
Pick the same I420 format the other test use. Without this, the source
picks AYUV64, which fails.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1573>
2020-10-10 04:34:56 +00:00
Ederson de Souza
8335039ecd tests/avtp: Fix coverity issues
Fixes sign extension issues, unchecked return values and some constant
expression results.

CID: 1465073, 1465074, 1465075, 1465076, 1465077
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1398>
2020-09-28 18:40:43 +00:00
Seungha Yang
ea24a2e527 d3d11: Add support for packed 8bits 4:2:2 YUV formats
Note that newly added formats (YUY2, UYVY, and VYUY) are not supported
render target view formats. So such formats can be only input of d3d11convert
or d3d11videosink. Another note is that YUY2 format is a very common
format for hardware en/decoders on Windows.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1581>
2020-09-18 14:47:21 +00:00
Haihao Xiang
4a93f6e651 h265parse: recognize more HEVC extension streams
There are streams which have the right general_profile_idc and
general_profile_compatibility_flag, but don't have the right extension
flags. We may try to use chroma_format_idc and bit_depth to
recognize these streams.

e.g.
https://www.itu.int/wftp3/av-arch/jctvc-site/bitstream_exchange/draft_conformance/SCC/IBF_Disabled_A_MediaTek_2.zip

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1328>
2020-09-16 16:51:45 +00:00
Haihao Xiang
626af12498 h265parser: select the right profile for high throughput SCC stream
Currently screen-extended-high-throughput-444 is recognized as
screen-extended-main-444, screen-extended-high-throughput-444-10 is
recognized as screen-extended-main-444-10 because they have the same
extension flags, so without this patch, it is possible that a decoder
which supports SCC but doesn't support throughput SCC will try to decode
a throughput SCC stream.

e.g.
https://www.itu.int/wftp3/av-arch/jctvc-site/bitstream_exchange/draft_conformance/SCC/HT_A_SCC_Apple_2.zip

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1328>
2020-09-16 16:51:45 +00:00
Jordan Petridis
e4732fbbd5
validate: plug leak in gssdp
These are triggered by the webrtcbin tests

https://gitlab.gnome.org/GNOME/gssdp/-/issues/10
2020-09-14 14:42:36 +03:00
Matthew Waters
e2d88f0569 webrtc: propagate more errors through the promise
Return errors on promises when things fail where available.

Things like parsing errors, invalid states, missing fields, unsupported
transitions, etc.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1565>
2020-09-14 04:04:29 +00:00
Seungha Yang
2b152eae69 videoparsers: Add vp9parse element
Adding vp9parse element to parse various stream information such as
resolution, profile, and so on. If upstream does not provide resolution and/or
profile, this would be useful for decodebin pipeline for autoplugging
suitable decoder element depending on template caps of each decoder element.

In addition, vp9parse element supports unpacking superframe into
single frame for decoders. The vp9 superframe is a frame which consists
of multiple frames (or superframe with one frame is allowed) followed by superframe
index block. Then unpacked each frame will be considered as normal frame
by decoder. The decision for unpacking will be done by downstream element's
"alignment" caps field, which can be "super-frame" or "frame".
If downstream specifies the "alignment" as "frame",
then vp9parse element will split an incoming superframe into single frames
and the superframe index (located at the end of the superframe) data
will be discarded by vp9parse element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1041>
2020-09-10 14:56:52 +00:00
Mathieu Duponchelle
c58357fb66 line21enc: add remove-caption-meta property
Similar to #GstCCExtractor:remove-caption-meta

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1554>
2020-09-09 22:11:28 +02:00
Mathieu Duponchelle
c07e2a89ba line21enc: heavily constrain video height
We can only determine a correct placement for the CC line
with:

* height == 525 (standard NTSC, line 21 / 22)
* height == 486 (NTSC usable lines + 6 lines for VBI, line 1 / 2)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1554>
2020-09-09 19:38:58 +02:00
Jan Alexander Steffens (heftig)
ebe397892b tests: mpegtsmux: Test that we can manipulate pads after stop
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1552>
2020-09-01 14:01:56 +00:00
Matthew Waters
e4b848e2a8 tests/webrtc: unref GBytes after use
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1535>
2020-08-24 17:02:35 +10:00
Sebastian Dröge
1d1b3eb8b4 cccombiner: Update for additional info parameter to the "samples-selected" signal
See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/590

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1498>
2020-08-07 17:53:14 +00:00
Mathieu Duponchelle
265128e7f7 cccombiner: implement samples selection API
Call gst_aggregator_selected_samples() after identifying the
caption buffers that will be added as a meta on the next video
buffer.

Implement GstAggregator.peek_next_sample.

Add an example that demonstrates usage of the new API in
combination with the existing buffer-consumed signal.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1390>
2020-07-30 23:10:33 +00:00
Tim-Philipp Müller
395ecb3d2f avtp: rename tstamp-mode to timestamp-mode
I thnk w cn spre the xtra lttrs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1397>
2020-07-11 00:14:44 +01:00
Jan Alexander Steffens (heftig)
9c2982d22c tests: mpegtsmux: Test we don't crash releasing unused pad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1411>
2020-07-07 14:05:04 +02:00
Jan Alexander Steffens (heftig)
076189e2dc tests: mpegtsmux: Avoid use-after-unref
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1411>
2020-07-07 14:05:04 +02:00
Matthew Waters
ebd1b2c929 ccconverter: write the cdp timecode data correctly
We were mixing up the tens part with the unit parts all over the place.

e.g. 12 seconds would be encoded as 0x21 instead of the correct 0x12

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1400>
2020-07-03 06:54:46 +00:00
Matthew Waters
c6c4d42c4a ccconverter: fail negotiation when framerate conversion is not possible
Converting between anything but cdp will fail at converting
framerates and negotiation should reflect that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1393>
2020-07-01 19:33:56 +00:00
Matthew Waters
4f334234c8 ccconverter: fix missing output framerate on the caps
A pipeline like this:

closedcaption/x-cea-708,format=cdp,framerate=30000/1001 ! ccconverter ! closedcaption/x-cea-708,format=cc_data

would produce a critical/assert:

GStreamer-CRITICAL **: 14:21:11.509: gst_util_fraction_multiply: assertion 'a_d != 0' failed

because there would be no framerate field on ccconverter's output.

Fixed by always fixating a framerate if the input has a framerate.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1393>
2020-07-01 19:33:56 +00:00
Matthew Waters
0e72318515 vulkan/instance: expose extension/layer choices
Extensions and layers can be enabled before calling
gst_vulkan_instance_open() but after calling
gst_vulkan_instance_fill_info().

Use the list of available extensions to better choose a default display
implementation to use based on the available Vulkan extensions for surface
output.

Defaults are still the same.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1341>
2020-06-21 09:30:29 +00:00
Matthew Waters
aad7ed31e1 vulkan/instance: add vulkan API version selection and checking
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1341>
2020-06-21 09:30:29 +00:00
Seungha Yang
57c8ad1dbc tests: wasapi2: Add unit test for reusing wasapisrc
Test state change between playing and null and playing again

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1264>
2020-06-08 03:10:05 +00:00
Ederson de Souza
6caea9e19b tests/avtp: Plug some (more) leaks
Some leaks were introduced in new tests - this patch fix them.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1312>
2020-06-01 18:03:19 +00:00
Jan Alexander Steffens (heftig)
aad9cf8096 mpegtsdemux: tests: Test that tsparse doesn't drop padding
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1300>
2020-05-28 16:41:30 +00:00
Jan Schmidt
737cfc40de avtp: Initialise strack structures to 0 in tests
Avoid valgrind warnings about accessing uninitialised memory
in the tests by initialisting structures to 0

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1305>
2020-05-28 10:58:02 +00:00
Jan Schmidt
0e578b1096 avtp: Fix some leaks in the tests
Fix valgrind errors that area showing on the CI now
that AVTP elements are built.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1305>
2020-05-28 10:58:02 +00:00
Tim-Philipp Müller
690f8d30ac tests: fix meson test env setup to make sure we use the right gst-plugin-scanner
If core is built as a subproject (e.g. as in gst-build), make sure to use
the gst-plugin-scanner from the built subproject. Without this, gstreamer
might accidentally use the gst-plugin-scanner from the install prefix if
that exists, which in turn might drag in gst library versions we didn't
mean to drag in. Those gst library versions might then be older than
what our current build needs, and might cause our newly-built plugins
to get blacklisted in the test registry because they rely on a symbol
that the wrongly-pulled in gst lib doesn't have.

This should fix running of unit tests in gst-build when invoking
meson test or ninja test from outside the devenv for the case where
there is an older or different-version gst-plugin-scanner installed
in the install prefix.

In case no gst-plugin-scanner is installed in the install prefix, this
will fix "GStreamer-WARNING: External plugin loader failed. This most
likely means that the plugin loader helper binary was not found or
could not be run. You might need to set the GST_PLUGIN_SCANNER
environment variable if your setup is unusual." warnings when running
the unit tests.

In the case where we find GStreamer core via pkg-config we use
a newly-added pkg-config var "pluginscannerdir" to get the right
directory. This has the benefit of working transparently for both
installed and uninstalled pkg-config files/setups.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1302>
2020-05-27 15:17:12 +01:00
Stéphane Cerveau
298e22e217 tests: fix nalutils file name
The filename was too long causing issues with ccache

Fix https://gitlab.freedesktop.org/gstreamer/gst-build/-/issues/97

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1281>
2020-05-19 15:39:50 +02:00
Jan Alexander Steffens (heftig)
055de3cdff mpegtsdemux: tests: Add simple tests for tsparse and tsdemux
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1274>
2020-05-18 14:11:40 +00:00
Matthew Waters
ba1558a7ab ccconverter: use a better padding byte sequence for writing cdp
0xf8 can be interpreted as cea608 data at the beginning of a cdp packet
as the cc_valid bit is not checked when cc_valid in (0b00 or 0b01).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1116>
2020-05-11 12:30:31 +00:00
Matthew Waters
7ed0bc539f ccconverter: split temporary storage into 3
Instead of storing the raw cc_data, store the 2 cea608 fields individually
as well as the ccp data.

Simply copying the input cc_data to the output cc_data violates a number of
requirements in the cea708 specification.  The most prominent being, that
cea608 triples must be placed at the beginning of each cdp.

We also need to comply with the framerate-dpendent limits for both the
cea608 and the ccp data which may involve splitting or merging some
cea608 data but not ccp data or vice versa.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1116>
2020-05-11 12:30:31 +00:00
Matthew Waters
3417a1709c ccconvert: compact input cc_data where possible
Skip over padding cc_data triples.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1116>
2020-05-11 12:30:31 +00:00