Originally decodebin couldn't deal with that in 0.10, but now simply
setting the caps when we know them should be enough. Pad activation
mode switching might need some more testing/tweaking with the new
arrangement.
gst_basertppayload -> gst_base_rtp_payload
Add pts/dts support in the depayloader
Remove old timestamp code
Add a default getcaps function so subclasses can chain up to it instead of
relying on the return value of the getcaps function.
Now we can configure how much time to wait before deciding that a
discont has happened.
Also, adds getter and setter to allow derived implementations to set
this value upon construction.
Suggestions and several improvements by Havard Graff.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
A common problem for audio-playback is that the timestamps might not
be completely linear. This is specially common when doing streaming over
a network, where you can have jittery and/or bursty packettransmission,
which again will often be reflected on the buffertimestamps.
Now, the current implementation have a threshold that says how far the
buffertimestamp is allowed o drift from the ideal aligned time in the
ringbuffer. This was an instant reaction, and ment that if one buffer
arrived with a timestamp that would breach the drift-tolerance, a resync
would take place, and the result would be an audible gap for the
listener.
The annoying thing would be that in the case of a "timestamp-outlier",
you would first resync one way, say +100ms, and then, if the next
timestamp was "back on track", you would end up resyncing the other way
(-100ms) So in fact, when you had only one buffer with slightly off
timestamping, you would end up with *two* audible gaps. This is the
problem this patch addresses.
The way to "fix" this problem with the previous implementation, would
have been to increase the "drift-tolerance" to a value that was greater
than the largest timestamp-outlier one would normally expect. The big
problem with this approach, however, is that it will allow normal
operations with a huge offset timestamp vs running-time, which is
detrimental to lip-sync. If the drift-tolerance is set to 200ms, it
basically means that lip-sync can easily end up being off by that much.
This patch will basically start a timer when the first breach of
drift-tolerance is detected. If any following timestamp for the next n
nanoseconds gets "back on track" within the threshold, it has basically
eliminated the effect of an outlier, and the timer is stopped. If,
however, all timestamps within this time-limit are breaching the
threshold, we are probably facing a more permanent offset in the
timestamps, and a resync is allowed to happen.
So basically this patch offers something as rare as both higher
accuracy, it terms of allowing smaller drift-tolerances, as well as much
smoother, less glitchy playback!
Commit message and improvments by Havard Graff.
Fixes bug #640859.
Otherwise we'll just error out when the first buffer gets pushed.
This is a porting artefact, in 0.10 the infos were allocated on the
heap, now we're doing everything with stack-allocated structs.
Not sure how this one got pulled into a merge. In 0.10, it was moved away to
gst-template a long time ago. gstaudiofilterexample.c got generated from
gstaudiofiltertemplate.c.
The array we're writing to is limited to 64 ... but the amount of
input positions might be lower than 64. Therefore use MIN and not
MAX to know how many values to read from the array.
Add a method to configure the output caps. Subclasses can't use
gst_pad_set_caps() anymore because then we won't see the caps.
Unbreak the padtemplate registration, the GTypeClass that is configured in the
object during _init is not the right one, we need to use the klass passed as the
argument to the init function..
This reverts commit 11e375486e.
GST_BOILERPLATE() can't define an abstract type and
G_DEFINE_ABSTRACT_TYPE() does not pass the class struct to
the instance_init function and there's no way to get the
class struct of the current type in instance_init().
There's no code whatsoever that uses these macros. If anyone
ever feels the need to resurrect them, we should add them to
gstutils.h in core or libgstaudio or so.
The /*< ... >*/ style is only used for public|protected|private,
signal comments use /* signals */. This prevents the some code
parsers/binding generators to be confused by the comment.
Merge in doc updates for audio enums from 0.10, and get rid
of the #if #else in the enum list, since that confuses gtk-doc.
Conflicts:
gst-libs/gst/audio/audio.c
gst-libs/gst/audio/audio.h
Remove the _ in front of the endianness prefix.
Remove the _3 postfix for the 24 bits formats.
Add a _32 postfix after the formats that occupy extra space beyond their
natural size.
The result is that the GST_AUDIO_NE() macro can simply append the endianness
after all formats and that we only specify a different sample width when it is
different from the natural size of the sample. This makes things more consistent
and follows the pulseaudio conventions instead of the alsa ones.
Leaving the GST_USE_UNSTABLE_API guards in until some of the
ported decoders have been updated and it's clear that I didn't
mess up anywhere porting things to the new audio API.
Adds little beyond baseaudiocodec (seeking, bit of query), and what it adds
is mainly out-of-scope (e.g. decoder seeking, should be done by upstream
demuxer/parser) and/or based on non-prime example (mad).
Moved most of the code to GstBaseAudioCodec, GstBaseAudioDecode is
now really small, maybe we do not really need it (or its encoder
counterpart). Added more API for subclasses and documentation.
Otherwise, discoverer will generated an "inner" codec
where there can be a tranformation (eg, kate -> DVD SPU,
and various ->text/x-pango-markup).
https://bugzilla.gnome.org/show_bug.cgi?id=639055
Without the perfect timestamp machinery, the RTP timestamp can be
computed directly from the running time of a buffer, but the perfect
timestamp patch broke that assumption. This patch restores it by
having the first perfect timestamp be the running time of that buffer
and counting from there.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=654434
Rename @view_id to @id.
Add an id to the video metadata. Add a method to get the metadata from a buffer
with the given id.
Make a method to map a frame with a certain id. This only maps the frame with
the given id on the video metadata. The generic frame id can be used when a
buffer carries multiple video frames such as in multiview mode but maybe also
when dealing with interlaced video that stores the fields in separate buffers.
Make enums for the chroma siting for easier use in the videoinfo.
Make enums for the color range, color matrix, transfer function and the
color primaries. Add these values to the video info structure in a Colorimetry
structure. These values define the exact colors and are needed to perform
correct colorspace conversion. Use a couple of predefined colorimetry specs
because in practice only a few combinations are in use.
Add view_id to the video frames to identify the view this frame represents in
multiview video.
Remove old gst_video_parse_caps_framerate, use the videoinfo for this.
Port elements to new colorimetry info.
Remove deprecated colorspace property from videotestsrc.
Rework the audio caps similar to the video caps. Remove
width/depth/endianness/signed fields and replace with a simple string
format and media type audio/x-raw.
Create a GstAudioInfo and some helper methods to parse caps.
Remove duplicate code from the ringbuffer and replace with audio info.
Use AudioInfo in the base audio filter class.
Port elements to new API.
Unlike linux, OSX wakes up select with POLLOUT (instead of POLLERR) when
connect() is done async and the connection is refused. Therefore always check
for the socket error state using getsockopt (..., SO_ERROR, ...) after a
connection attempt.
In ID3 v2.3 compressed frames will have a 4-byte data length indicator
after the frame header to indicate the size of the decompressed data.
This integer is unlikely to be a sync-safe integer for v2.3 tags,
only in v2.4 it's sync-safe.
Reversing the unsynchronisation seems to work slightly differently
for ID3 v2.3 tags and v2.4 tags: v2.3 tags don't have syncsafe frame
sizes in the frame header, so the unsynchronisation is applied to
the whole frame data including all the frame headers. v2.4 frames
have sync-safe sizes, however, so the unsynchronisation only needs
to be applied to the actual frame data, and it seems that's what's
being done as well. So we need to undo the unsynchronisation on a
per-frame basis for v2.4 tags for things to work properly.
Fixes extraction of coverart/images from APIC frames in ID3 v2.4
tags (#588148).
Add unit test for this as well.
We didn't handle unsynchronization at all up to now, which might have
caused frames to not be extracted - esp. frames after an APIC picture
frame. Fixes#577468.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_extract_picture_buffer):
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Use new utility functions in libgsttag to process coverart (#512333).
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_extract_picture_buffer):
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Generate the image-type values correctly. Leave them out of the caps
when outputting a "preview image" tag, since it only makes sense
to have one of those - the type is irrelevant.
* sys/sunaudio/gstsunaudiomixerctrl.c:
(gst_sunaudiomixer_ctrl_open):
If we can, mark the mixer multiple open when we use it, in case
(for some reason) the process wants to open it again elsewhere.
Original commit message from CVS:
Based on patch by: Tommi Myöhänen <ext-tommi.myohanen nokia com>
* gst-libs/gst/tag/id3v2frames.c: (parse_comment_frame):
Make sure the ISO 639-X language code in ID3v2 COMM frames
is actually valid UTF-8 (or rather: ASCII), so we don't end
up with non-UTF8 strings in tags if there's garbage in the
language field. Also make sure the language code is always
lower case. Fixes: #508291.
Original commit message from CVS:
* tag: id3v2: (parse_url_link_frame):
Parse WOAF frames and put the result into GST_TAG_CONTACT,
which is where it would end up if the same information was
put in a vorbis comment (don't think it's worth adding a
new URI tag for this). Fixes#488112.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c:
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
We don't want the same string multiple times in a tag list for the
same tag ever, for any tag, not just for GST_TAG_GENRE, so make sure
this doesn't happen and remove special-case code for GST_TAG_GENRE.
Original commit message from CVS:
Based on patch by: Jason Kivlighn <jkivlighn gmail com>
* gst-libs/gst/tag/id3v2frames.c:
Extract license/copyright URIs from ID3v2 WCOP frames
(Fixes#447000).
* tests/check/elements/id3demux.c:
* tests/files/Makefile.am:
* tests/files/id3-447000-wcop.tag:
Add simple unit test.
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c:
* gst-libs/gst/tag/gstid3demux.h:
* gst-libs/gst/tag/id3v2.c:
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c:
Port ID3 tag demuxer over to the new GstTagDemux in -base
(now would be a good time to test re-importing your music
collection).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Fix parsing of ID3 v2.2.0 PIC frames. Only in version >= 2.3.0 is
the image format a variable-length NUL-terminated string; in
versions before that the image format is a fixed-length string of
3 characters (see #348644 for a sample tag).
Also make supplied mime type lower-case and fix up 'jpg' to 'jpeg'.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_obsolete_tdat_frame):
Do not convert obsolete TDA/TDAT frames to TDRC frames, otherwise
the four-digit number will be interpreted as a year, whereas it is
month and day in DDMM format. Instead, parse TDAT frames and fix up
the date in the GST_TAG_DATE tag later if we also extracted a year.
Fixes#407349.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame):
Make sure that g_free always gets called on the same pointer that was
returned by g_malloc. Fixes#376594.
Do not leak memory if decompressed size is wrong.
Remove unneeded check of return value of g_malloc.
Patch by: René Stadler <mail@renestadler.de>
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
We require a -base more recent than 0.10.9, so it's safe to use
GST_TYPE_TAG_IMAGE_TYPE unconditionally now.
* ext/dv/gstdvdec.c: (gst_dvdec_sink_event):
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_sink_event):
Use _newsegment_full() now that we depend on a recent enough core.
* gst/wavparse/gstwavparse.c:
Remove cruft that we don't need any longer now that we depend on
a recent enough -base.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_text_identification_frame),
(parse_insert_string_field):
If strings in text fields are marked ISO8859-1, but contain
valid UTF-8 already, then handle them as UTF-8 and ignore
the encoding. (#351794)
Original commit message from CVS:
* configure.ac:
Require CVS of GStreamer core and -base (for
GST_TAG_EXTENDED_COMMENT and gst_tag_parse_extended_comment()).
* ext/taglib/gstid3v2mux.cc:
Write extended comment tags properly (#348762).
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_comment_frame):
Extract COMM frames into extended comments, which makes it
easier to properly retain the description bit of the tag
and maintain this information when re-tagging (#348762).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c:
(id3demux_add_id3v2_frame_blob_to_taglist):
Extract frames for ID3v2 versions prior to ID3v2.3.0 properly as
well, and add the version to the blob's buffer caps, since that
information will be needed for deserialisation later on (#348644).
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c: (plugin_init):
* gst-libs/gst/tag/id3v2.c:
(id3demux_add_id3v2_frame_blob_to_taglist):
* gst-libs/gst/tag/id3v2.h:
On second thought, it might be wiser and more efficient
not to do tag registration from a streaming thread.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c:
(id3demux_add_id3v2_frame_blob_to_taglist),
(id3demux_id3v2_frames_to_tag_list):
Put ID3v2 frames we can't parse as binary blobs into private
tags, so that they are not lost when retagging, at least once
id3v2mux has been taught to re-inject those frames again.
See bug #334375.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_parse_stream),
(gst_avi_demux_process_next_entry):
Fix some leaks.
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
Don't use \n in debug lines.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Set image type from APIC frame as "image-type" field
of GST_TAG_IMAGE buffer caps (#344605).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(scan_encoded_string), (parse_picture_frame):
Extract images from ID3v2 tags (APIC frames). Fixes#339704.
* configure.ac:
Require core >= 0.10.8 (for GST_TAG_IMAGE and
GST_TAG_PPEVIEW_IMAGE used in the patch above).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
A track/volume number or count of 0 does not make sense,
just ignore it along with negative numbers (a tag might
only contain a track count without a track number).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
Don't output any tag when we encounter a negative track number - the
tag type is uint, so we end up outputting huge positive numbers
instead. (Fixes: #342029)
Original commit message from CVS:
* gst/autodetect/gstautoaudiosink.c:
(gst_auto_audio_sink_find_best):
* gst/autodetect/gstautovideosink.c:
(gst_auto_video_sink_find_best):
Make the name of the child element be based on the name of the
parent, so that debug output is more useful.
* gst-libs/gst/tag/id3v2frames.c: (find_utf16_bom),
(parse_insert_string_field), (parse_split_strings):
Rework string parsing to always walk over BOM markers in UTF16
strings, using the endianness indicated by the innermost one,
then trying the opposite endianness if that fails to convert
to valid UTF-8. Fixes#341774
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_insert_string_field):
Some more debug info. No need to check whether the string
returned by g_convert() is really UTF-8 - either it is or
we get NULL returned.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_genre_fields_to_taglist):
Fix parsing of numeric genre strings some more, by ensuring that
we only try and parse strings that a) Start with '(' and b) Consist
only of digits.
Also, when finding an escaping '((' sequence, bust it back to '(' by
swallowing the first parenthesis
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (has_utf16_bom),
(parse_split_strings):
Recognise and skip any byte order marker (BOM) in
UTF-16 strings.
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_chain):
* gst-libs/gst/tag/gstid3demux.c: (gst_id3demux_chain):
Don't attempt typefinding on too-short buffers that have been
completely trimmed away.
* gst-libs/gst/tag/id3v2.c: (id3demux_read_id3v2_tag):
Improve the debug output
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c:
(parse_relative_volume_adjustment_two):
We only care about gain and peak data for the master volume.
Original commit message from CVS:
* configure.ac:
Bump -base requirement to 0.10.5 for gst_tag_from_id3_user_tag(),
used by id3demux.
* gst-libs/gst/tag/gstid3demux.c: (plugin_init):
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_user_text_identification_frame),
(parse_unique_file_identifier):
Add support for UFID and TXXX frames and extract musicbrainz tags.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
* gst-libs/gst/tag/id3v2frames.c: (id3v2_genre_fields_to_taglist):
Handle 0 data size in otherwise valid frames.
Handle numeric strings in 2.4.0 even when not in parentheses
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
ID3 2.3.0 used synch-safe integers for the tag size, but not for the
frame size. (Fixes#331368)
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_insert_string_field),
(parse_split_strings):
Add more validation to ensure that a char encoding conversion
produced a valid UTF-8 string.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_split_strings):
Adjust for data length indicators when parsing (Fixes#329810)
Fix stupid bug parsing UTF-8 tag text.
Output tag strings with multiple fields as multiple tags, so the
app gets all the data.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_text_identification_frame),
(id3v2_tag_to_taglist), (id3v2_genre_string_to_taglist),
(id3v2_genre_fields_to_taglist):
Never output a tag with a null contents string.
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c: (gst_id3demux_chain),
(gst_id3demux_read_id3v1), (gst_id3demux_sink_activate),
(gst_id3demux_send_tag_event):
* gst-libs/gst/tag/id3v2.c: (id3demux_read_id3v1_tag):
Someone should kick my butt. Remove ID3v1 tags from the end of the
file.
Improve error messages. Send the TAG message as soon as we complete
typefinding, instead of waiting until we send the first buffer.
Downstream tag event is still sent before the first buffer.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame):
Never trust ANY information encoded in a media file, especially
when it's giving you sizes. (Fixes#328452)
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
Remove errant break statement, and fix compilation with
older GCC.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_read_id3v2_tag):
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_comment_frame), (parse_text_identification_frame),
(id3v2_tag_to_taglist), (id3v2_are_digits),
(id3v2_genre_string_to_taglist), (id3v2_genre_fields_to_taglist),
(parse_split_strings), (free_tag_strings):
Rewrite parsing of text tags to handle multiple NULL terminated
strings. Parse numeric genre strings and ID3v2 type
"(3)(6)Alternative" style genre strings.
Parse dates that are only YYYY or YYYY-mm format.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame):
Fix compilation of id3demux when zlib is not present.
(Fixes#326602; patch by: Sergey Scobich)
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c: (gst_id3demux_add_srcpad):
Add gst_element_no_more_pads() for proper decodebin behaviour.
* gst-libs/gst/tag/id3v2frames.c: (parse_comment_frame),
(parse_text_identification_frame), (parse_split_strings):
Failure to decode some tags is not a GST_ERROR() but a
GST_WARNING()
When iterating over a chunk of text, check that we haven't gone too
far.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_read_id3v2_tag):
If a broken tag has 0 bytes payload, at least still skip
the 10 byte header
No point building these by default. Also, these generated files
should go into the srcdir, not the builddir in this case, since
they're version controlled.
