Sreerenj Balachandran
0abec3f89a
pbutils: recognise more H.264 profiles/levels
...
Add profile/level extraction for Multiview High profile
and Stereo High profile.
https://bugzilla.gnome.org/show_bug.cgi?id=694346
2013-02-21 23:55:10 +00:00
Sreerenj Balachandran
9791f0aaf1
typefindfunctions: recognize SVC and MVC nal units in h264 streams
...
Ensure the detection of svc and mvc as a part of h264 stream.
Once the typefinder detect a subset_sequence_parameter_set(ssps),
then each nal unit with type 14 or 20 should be detected as a
part of h264 stream thereafter.
https://bugzilla.gnome.org/show_bug.cgi?id=694346
2013-02-21 12:20:36 +00:00
Stefan Sauer
a86ca535c8
adder: ensure sending a flush-stop after flush-start
...
Previously adder was only sending the flush-stop, when it saw the flushing seek.
If one sends a flushing see direcly to an element upstream of adder, it would
fail to unflush the downstream pads.
2013-02-21 10:11:32 +01:00
Arnaud Vrac
95266cf212
video-overlay-composition: fix ayuv/argb conversion
...
Helps when using dvbsuboverlay in connection with vaapisink
or some other video sink that wants ARGB pixels (dvbsuboverlay
attaches pixels in AYUV format, and we then convert as needed).
Alignment should not be a problem here.
2013-02-19 20:39:29 +00:00
Tim-Philipp Müller
8e4934820f
pango: use new GST_VIDEO_OVERLAY_COMPOSITION_BLEND_FORMATS define
...
https://bugzilla.gnome.org/show_bug.cgi?id=665751
2013-02-19 12:54:40 +00:00
Tim-Philipp Müller
0b329f2c22
video: add define for video formats supported by the overlay blending code
...
For use in template caps by overlay elements that use
video_overlay_composition_blend().
API: GST_VIDEO_OVERLAY_COMPOSITION_BLEND_FORMATS
https://bugzilla.gnome.org/show_bug.cgi?id=665751
2013-02-19 12:54:40 +00:00
Sebastian Dröge
20d2a60977
pkg-config: Fix gstreamer-plugins-base pkg-config files to include all libraries
2013-02-19 12:55:34 +01:00
Benjamin Gaignard
9a69f66ed1
dmabuf: Include config.h
2013-02-19 12:41:58 +01:00
Tim-Philipp Müller
1b1bb98256
allocators: add guard and minor clean-ups
2013-02-19 10:45:23 +00:00
Tim-Philipp Müller
4179fe42e0
allocators: add some since markers and misc other doc clean-ups
2013-02-19 09:40:31 +00:00
Tim-Philipp Müller
320c992b94
allocators: header clean-up
2013-02-19 09:35:10 +00:00
Tim-Philipp Müller
f56720fc7b
configure: use AC_CHECK_FUNC to check for mmap
2013-02-19 09:32:08 +00:00
Sebastian Dröge
26ff0ced15
allocators: Integrate into the documentation
2013-02-19 10:05:38 +01:00
Sebastian Dröge
d405dddd50
allocators: Add .def file with all exports
2013-02-19 10:05:38 +01:00
Sebastian Dröge
37f0067946
allocators: Add single-include header
2013-02-19 10:05:38 +01:00
Sebastian Dröge
76400ef226
dmabuf: Improve documentation and annotations a bit
2013-02-19 10:05:38 +01:00
Benjamin Gaignard
ceecdb8e1d
allocators: Add dmabuf-based GstMemory and GstAllocator
...
Create new GstMemory and GstAllocator base on dmabuf.
Memory is not allocated/freed by userland but mapped/unmmaped
from a dmabuf file descriptor when requested.
This allocator is included in a new lib called libgstallocators
https://bugzilla.gnome.org/show_bug.cgi?id=693826
2013-02-19 10:05:38 +01:00
Tim-Philipp Müller
ed87e77baa
tests: fix encodebin unit test on 32-bit systems
...
Fixes critical warning on x86:
g_object_set_valist: object class `GstOggMux' has no property named `testingoggmux'
2013-02-16 23:55:57 +00:00
Tim-Philipp Müller
6682215d9d
audio: fix GST_AUDIO_INFO_ENDIANNESS macro
2013-02-16 13:06:54 +00:00
Vincent Penquerc'h
bccfc679b5
encodebin: activate ghost pad after creating it
...
This ensures the ghost pad will not stay in flushing mode
when it receives a flush stop event, and generally behave
badly.
This fixes at least one case of a dynamic decodebin2 + encodebin
pipeline finding a source that has not prerolled when it should
have been (due to the ghostpad staying in flushing mode).
2013-02-14 16:07:48 +00:00
Matej Knopp
1e5b50e94c
decodebin: don't block on caps
2013-02-14 11:37:54 +01:00
Sebastian Dröge
cfd73a8cf7
decodebin: Remove left-over line from last commit
2013-02-14 11:25:37 +01:00
Matej Knopp
872cc295a6
decodebin: Check if value is set before unsetting it
...
https://bugzilla.gnome.org/show_bug.cgi?id=693401
2013-02-14 11:22:34 +01:00
Matej Knopp
5385a65b04
riffmedia: add systemstream to all mpeg video caps
2013-02-14 10:58:38 +01:00
Tim-Philipp Müller
7110c7216f
vorbistag: add mapping for TOTALTRACKS and TOTALDISCS tags
...
Found TOTALTRACKS in a FLAC file instead of TRACKTOTAL,
we should at least read this if present.
http://www.hydrogenaudio.org/forums/index.php?showtopic=91496&st=0&p=773857&#entry773857
2013-02-14 00:33:56 +00:00
Tim-Philipp Müller
03d4a69df4
typefinding: add parsed=true to mp3 and mpeg2 video ES caps
...
Because we can, and that's also what we do for other formats.
2013-02-13 21:02:39 +00:00
Stefan Sauer
cff9fccc69
adder: use the collect_pads_query func
...
We were setting the query-func on the sink-pad, which got overwritten when
adding the new pad to collect pads. Instead register our query-func with the
collect pads object. This fixes filter caps. Add a test for it.
2013-02-13 21:11:41 +01:00
Stefan Sauer
abfa8678ec
mediatype-audio: write out 24 in 32bit formats
2013-02-13 21:11:41 +01:00
Sebastian Dröge
c7e93ad043
decodebin: Fix MP3 parser unit test
...
The MP3 parser required fields on its caps that it
didn't need and never got from (e.g.) typefind.
2013-02-13 11:25:02 +01:00
Vincent Penquerc'h
17cdb54aa4
encodebin: sync muxer state with parent bin
...
Other elements were synced, but not the muxer.
2013-02-12 17:27:10 +00:00
Thijs Vermeir
d189beda4d
videodecoder: allow parse function to not use all data on adapter
2013-02-12 10:17:46 +01:00
Alexander Schrab
e7caef6b29
decodebin: Push caps event immediately to ghost pad to avoid exposing pads without caps
2013-02-12 10:12:14 +01:00
David Schleef
31312d586e
videodecoder: Don't blindly assign DTS to PTS
...
DTS and PTS usually have a non-zero offset between them in MPEG-TS,
so assigning DTS to PTS is almost always wrong. The other, newer
timestamp recovery code does it correctly if we leave it as invalid.
2013-02-11 11:57:08 -08:00
David Schleef
ceb6585d26
videodecoder: warn if frame list gets long
...
Decoders that get unparsed input are internally leaking nearly
every incoming buffer. This checks that case.
2013-02-11 11:56:14 -08:00
Tim-Philipp Müller
804959ac5f
tests: don't use deprecated thread API in streamsynchronizer test
2013-02-09 16:50:05 +00:00
Marc Leeman
f704b3f975
decodebin: g_mutex_new -> g_mutex_init
...
Don't use deprecated GLib API.
https://bugzilla.gnome.org/show_bug.cgi?id=693302
2013-02-07 13:51:17 +00:00
Jan Schmidt
fb102419c7
pango: 3rd time's the charm. Fix attribute list handling.
...
Really really fix attribute list handling by taking a
copy of the original attributes that pango_attr_list_filter
can mutate, but keep the original around intact to restore
later.
2013-02-08 00:05:24 +11:00
Jan Schmidt
bc42d382e2
pango: Don't modify the original attributes list.
...
Take a copy of the original attributes list instead of just
a ref, since pango_attr_list_filter can remove elements from it.
2013-02-07 23:45:26 +11:00
Jan Schmidt
2528baf2c2
pango: Remove extra pango_attr_list_copy() from basetextoverlay
...
Fixes a per-buffer memory leak of the attribute list.
2013-02-07 23:06:57 +11:00
Tim-Philipp Müller
dce49a1a7e
video: fix return type of _get_palette() and add since markers to docs
...
'const gpointer' is not the same as 'gconstpointer', see
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=35928 .
2013-02-06 12:43:51 +00:00
Wim Taymans
ed6e7776f3
appsrc: negotiate before popping buffer
...
First negotiate and then try to pop a buffer from the queue. This is just
to improve the debug log.
2013-02-06 10:07:47 +01:00
Wim Taymans
d4ed3ddf6f
appsrc: always take mutex before object lock
...
The locking order is to first take the appsrc mutex and then the
object lock.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=693224
2013-02-06 10:00:27 +01:00
Wim Taymans
ebf24e292e
videotestsrc: use video library palette
...
Use the palette provided and used by the video library instead of making our own
copy.
2013-02-05 11:20:20 +01:00
Wim Taymans
0085a77919
videoscale: scale each field in interlace mode
...
When we are dealing with interlaced content, scale each field intependently so
that we don't destroy the interlacing.
See https://bugzilla.gnome.org/show_bug.cgi?id=588535
2013-02-05 10:49:57 +01:00
Wim Taymans
be866d4b78
videoconvert: interlace support to some fastpath functions
...
Add interlace support for some fastpath functions.
2013-02-04 16:21:20 +01:00
Wim Taymans
599880ff8d
videoconvert: make fast path interlaced aware
...
Make sure that we also handle interlacing when choosing the fast path.
See https://bugzilla.gnome.org/show_bug.cgi?id=588535
2013-02-04 15:40:02 +01:00
Wim Taymans
e3a9a7cf07
videoconvert: pass frame interlaced flag to pack/unpack
...
If the frame is interlaced, pass the interlaced flag to the pack/unpack
functions to make it unpack correctly.
2013-02-04 15:19:35 +01:00
Wim Taymans
c1a25d2ce7
video-format: fix interlaced 4:2:0 and 4:1:0 pack/unpack
...
For interlaced vertically subsampled images we need to combine alternating
chroma lines with alternating luma lines. That is line 0 and 2 are combined
with the first line of chroma samples and line 1 and 3 with the second line
of chroma samples.
See also: https://bugzilla.gnome.org/show_bug.cgi?id=588535
2013-02-04 15:06:10 +01:00
Wim Taymans
ed2ce49499
videoconvert: use the palette helper functions
...
Get the palette from the video library instead of making our own.
2013-02-04 15:06:10 +01:00
Wim Taymans
cb7a7cd05c
video-format: add method to get palette
...
Make a new method to get the default palette for paletted formats.
2013-02-04 15:06:07 +01:00