Commit graph

1629 commits

Author SHA1 Message Date
Edward Hervey
2d3743e37d decodebin2: Forward event/queries for unlinked groups
When upstream events/queries reach sinkpads of unlinked groups (i.e.
no longer linked to the upstream demuxer), this patch attempts to find
the linked group and forward it upstream of that group.

This is done by adding upstream event/query probes on new group sinkpads
and then:
* Checking if the pad is linked or not (has a peer or not)
* If there is a peer, just let the event/query follow through normally
* If there is no peer, we find a pad to which to proxy it and return
  GST_PROBE_HANDLED if it succeeded (allowing the event/query to be properly
  returned to the initial called)

Note that this is definitely not thread-safe for the time being

https://bugzilla.gnome.org/show_bug.cgi?id=606382
2015-08-15 18:50:06 +02:00
Thiago Santos
052d1c7b8b playsinkconvertbin: remove accept-caps handling
Just let the internal element of the bin do it instead of forcing a
caps query to do it.
2015-08-14 05:48:31 -03:00
Vineeth TM
0a3fe31f26 decodebin: fix deadend_details string leak
deadend_details need not be returned when the pad is not a deadend.
Hence checking if res value is TRUE and clearing the string instead of
passing it on

https://bugzilla.gnome.org/show_bug.cgi?id=753088
2015-08-05 14:33:35 -03:00
Thiago Santos
9c2e08c54d decodebin: only try to expose complete groups
When switching to a new chain it might be that this new chain
is not yet ready to be exposed so check it before exposing.

Can happen with mpegts that might delay adding pads or pushing data
until it has found the PMT/PAT/PCR and that may take a while depending
on the stream.

It happened frequently with HLS:
http://vevoplaylist-live.hls.adaptive.level3.net/vevo/ch1/appleman.m3u8
2015-07-14 00:11:59 -03:00
Thiago Santos
1d1bebd769 decodebin: fix typo
Hided -> hid
2015-07-14 00:11:59 -03:00
Sebastian Dröge
f99a24f8b3 playsink: Require the streamvolume interface on the sink when using the sink's volume/mute properties
If the sink has properties named volume and mute, we have no idea about their
meaning. The streamvolume interface standardizes the meaning.

In the case of osxaudiosink for example, the current volume property has a
range of 0.0 to 1.0, but we need 0.0 to 10.0 or similar. Also osxaudiosink
has no mute property. As such, the volume element should be used here instead.

https://bugzilla.gnome.org/show_bug.cgi?id=752156
2015-07-10 11:55:23 +03:00
danny song
49d0083456 playbin: remove unnecessary break
https://bugzilla.gnome.org/show_bug.cgi?id=751690
2015-06-29 19:55:34 -03:00
Song Bing
d2e942ac02 streamsynchronizer: Unblock EOS wait when track switching.
sink_event () will blocked on EOS event. which will cause can't
send event when switch EOS track to non-EOS one.

https://bugzilla.gnome.org/show_bug.cgi?id=750761
2015-06-23 15:28:49 +02:00
Sebastian Dröge
bd508a343f streamsynchronizer: Don't wait for sparse streams when doing stream switches
Their stream-start event might come a bit later, like just before the first
buffer... and queues might run full before that happens.
2015-06-22 20:54:18 +02:00
Sebastian Dröge
152534611d streamsynchronizer: Add some more debug output 2015-06-22 20:29:52 +02:00
Sebastian Dröge
203b635d0c streamsynchronizer: Reset group start time when flushing
We reset the group start time to the running time of the start of the other
streams that are not flushed. This fixes seeking in gapless mode after the
first track has played.

https://bugzilla.gnome.org/show_bug.cgi?id=750013
2015-06-22 20:17:56 +02:00
Sebastian Dröge
ab79e50510 playbin: Reset suburi also when receiving an error message from the sub uridecodebin
http://bugzilla.gnome.org/show_bug.cgi?id=751118
2015-06-22 14:51:07 +02:00
Brijesh Singh
bcc9021071 playbin: free group->suburi on failure
If suburidecodebin is failed to negotiate (e.g file does not exist)
then free internal suburi variable so that 'current-suburi' property
returns correct status.

https://bugzilla.gnome.org/show_bug.cgi?id=751118
2015-06-22 14:48:42 +02:00
Sebastian Dröge
9c47e7d5e6 playbin: Check in autoplug_continue against the subtitle factory caps correctly
6a2f017bfa changed it to check the subtitle
factory caps if there is a text-sink but we fail to get its sinkpad. What
actually should be done here is to use the factory caps if there is no
text-sink at all.

https://bugzilla.gnome.org/show_bug.cgi?id=750785
2015-06-11 16:18:51 +02:00
Jan Schmidt
ca864ce46e playbin: Fix some warnings with clang around multiview enums
There is the GstVideoMultiviewMode enum and the
GstVideoMultiviewFramePacking, which is a subset of the
multiview modes, with the same values as the corresponding
types from the full enum. Do some casts and use the right
times to avoid implicitly using/passing GstVideoMultiviewFramePacking
when a GstVideoMultiviewMode is needed.
2015-06-11 23:01:48 +10:00
Jan Schmidt
383d8f02be playbin: Implement multiview frame-packing overrides
Add GstVideoMultiviewFramePacking enum, and the
video-multiview-mode and video-multiview-flags
properties on playbin.

Use a pad probe to replace the multiview information in
video caps sent out from uridecodebin.

This is a part implementation only - for full
correctness, it should also modify caps in caps events,
accept-caps and allocation queries.

https://bugzilla.gnome.org/show_bug.cgi?id=611157
2015-06-11 12:05:00 +10:00
Víctor Manuel Jáquez Leal
7b78a33dc6 playsink: fix the channel of color balance element
When traversing the color balance element channel list to find the one that
matches with the playsink proxy, the assignation was set to iterator of the
playsink proxy, not the balance element. Thus, the mapping to the values of
the balance element channel was wrong.

This patch fixes the assignation of the color balance element channel, so the
mapping to the channel of the color balance element is fixed.

https://bugzilla.gnome.org/show_bug.cgi?id=750691
2015-06-10 13:12:31 +02:00
Vineeth TM
50beddd474 playsink: cannot enable text flag while playing
when text playbin is not enabled in the beginning, then
video_srcpad_stream_synchronizer gets linked to videochain->sinkpad
and when we try to enable text bin during play, since it is already linked to videochain,
text chain does not get linked properly. Hence unlinking the same
before linking to text chain

https://bugzilla.gnome.org/show_bug.cgi?id=748908
2015-06-10 10:38:45 +02:00
Sreerenj Balachandran
90bbb830d9 playback: Skip 'ANY' capsfeature while finding the count of common capsfeatures
https://bugzilla.gnome.org/show_bug.cgi?id=687182
2015-06-09 10:13:08 +02:00
Sreerenj Balachandran
16378a7de3 playback: Add gstplaybackutils.{h,c} to deploy the common subroutines
Bring some of the helper functions in gstplaybin2.c to new files
gstplaybackutils.{h,c} which can be utilized by other files
in gst/playback too.

https://bugzilla.gnome.org/show_bug.cgi?id=687182
2015-06-09 10:13:08 +02:00
Jan Schmidt
b14ede9332 playback: Document GST_PLAY_FLAG_SOFT_COLORBALANCE 2015-05-30 01:11:47 +10:00
Thiago Santos
12ac087807 playsink: use queue to avoid lock in audiotee audio branches
This part of pipeline is:

tee name=t ! visualizationbin ! streamsynchronizer name=s
t. ! s.

streamsynchronizer might block and it could starve the visualization
branch of the pipeline when it is enabled.

The visualization bin has queues internally but the other branch
that links the audiotee directly to the synchronizer is vulnerable
to block. Adding a queue between "t. ! s." fixes deadlocks.

https://bugzilla.gnome.org/show_bug.cgi?id=749676
2015-05-28 04:56:16 -03:00
Stefan Sauer
9b9d1a6119 Revert "doc: Workaround gtkdoc issue"
This reverts commit df7ef3c35d.

This is fixed by the gtk-doc 1.23 release.
2015-05-18 20:01:49 +02:00
eunhae choi
1b755eb272 playbin: check the flags before set again
check the previous flags of playsink to avoid the reconfigure of playsink repeatedly

https://bugzilla.gnome.org/show_bug.cgi?id=749528
2015-05-18 10:01:04 +03:00
Nicolas Dufresne
df7ef3c35d doc: Workaround gtkdoc issue
With gtkdoc 1.22, the XML generator fails when a itemizedlist is
followed by a refsect2. Workaround the issue by wrapping the refsect2
into para.
2015-05-16 23:33:55 -04:00
Stefan Sauer
015bd9285a playback: use the new gst_object api
Use gst_object_has_as_anchestor instead of the now deprecated _has_ancestor.
2015-05-15 14:49:47 +02:00
Tim-Philipp Müller
ec5c93f169 docs: update element example pipelines
- gst-launch -> gst-launch-1.0
- use autoaudiosink and audiovideosink more often
- review pipeline examples and descriptions
2015-05-10 11:38:19 +01:00
Sebastian Dröge
a73631a29d streamsynchronizer: Don't override segment.base from upstream with 0
Upstream might want to use it to properly map timestamps to running/stream
times, if we just override it with 0 synchronization will be just wrong.

For this we remove some old 0.10 code related to segment accumulation, and
remove some more code that is useless now, and accumulate the group start time
(aka segment.base offset) manually now.

https://bugzilla.gnome.org/show_bug.cgi?id=635701
2015-05-05 15:35:46 +02:00
Tim-Philipp Müller
c680e324bc Remove obsolete Android build cruft
This is not needed any longer.
2015-04-26 18:42:34 +01:00
Luis de Bethencourt
df08f5eabe remove unused enum items PROP_LAST
This were probably added to the enums due to cargo cult programming and are
unused. Removing them.
2015-04-24 17:11:01 +01:00
Sebastian Dröge
3570100b66 decodebin: Also log the pointer value of sticky events in debug output
Makes it easier to follow them in the debug logs.
2015-04-08 20:49:39 -07:00
Vincent Penquerc'h
77dc09c3a9 decodebin2: fix deadlock on chain shutdown
When shutting down the chain, we can get a deadlock when removing
a pad, if that chain was being busy streaming but blocked (eg, while
waiting for a queue to have free space).

https://bugzilla.gnome.org/show_bug.cgi?id=746480
2015-04-03 15:42:49 +01:00
Luis de Bethencourt
985ed4847f playbin: avoid possible deference of null pointer
For safety, check the pointer playbin->curr_group is valid before
reading parameters of the structure.

CID #1291624
2015-03-30 10:50:48 +01:00
Thiago Santos
ceb26dd93d decodebin: improve debug message by printing the object
Print the pad object that EOS'd too early
2015-03-27 09:21:59 -03:00
Thiago Santos
d54d51d0d2 playbin: ignore new pads if it is shutting down
If a new pad is added after playbin has been put to READY/NULL it
should ignore new pads as it is shutting down.

This can happen when the pipeline fails to preroll (is still in READY)
and the user gives up on waiting or an error that doesn't reach
the demuxer occurs (on some event handling) and it will continue to
work and exposing pads while playbin has been put to NULL.

Without this check an input-selector is created and set to PAUSED
state, preventing playbin from properly shutting down in case it
has data blocked inside it.
2015-03-25 08:32:33 -03:00
Duncan Palmer
bf3e35a598 decodebin2: Set multiqueue sizes before use-buffering.
This fixes a race where the use-buffering property on a multiqueue was
set before the queue depth was changed from it's high preroll limits to
lower playback limits. This resulted in buffering messages being emitted
by the multiqueue in the short window between use-buffering being
set and the queue depth being reset.

https://bugzilla.gnome.org/show_bug.cgi?id=744308
2015-03-24 08:17:47 -03:00
Thiago Santos
b0b0ae1f24 streamsynchronizer: fix deadlock condition
The variables could have changed when the lock was released
to push a gap event. Streamsynchronizer needs to check them
again before going to sleep.

Bonus: fix a comment typo
2015-03-14 18:14:07 +00:00
Ramiro Polla
33b9535d97 playsink: remove redundant else statements 2015-03-14 14:21:32 +00:00
Ramiro Polla
b636fe29f3 playbin: don't escape percent sign in documentation code sample 2015-03-14 14:20:17 +00:00
Sebastian Dröge
8093e3ba94 playbin: Disconnect signals and invalidate group if it fails to activate
Otherwise playbin might move to the group directly after EOS of the next
group, and then error out again.
2015-03-12 12:18:30 +00:00
Song Bing
7ce97c723c streamsynchronizer: Remove unnecessary ERROR message.
Remove unnecessary ERROR message.
Push GAP will fail as flushing. Needn't ERROR message.

https://bugzilla.gnome.org/show_bug.cgi?id=736655
2015-03-11 15:48:42 +00:00
Tim-Philipp Müller
c53ba4beeb Fix double semicolons 2015-03-10 09:27:08 +00:00
Edward Hervey
7813315a4c playback: Fix broken GList modification
When we modify a GList (via g_list_delete_link), always reassign the
new head to the original GList. Otherwise we end up with
filtered_errors being corrupt (the head might have been the element
removed)
2015-02-26 12:08:49 +01:00
Vincent Penquerc'h
561ddabd97 decodebin: fix deadlock when resetting buffering
This function is static, and only ever called with the expose lock
taken. It thus has no reason to take this lock itself.

This was introduced by one of my locking fixes from 741355.

https://bugzilla.gnome.org/show_bug.cgi?id=741355
2015-02-24 16:07:26 +00:00
Vincent Penquerc'h
a2ca6459a6 playbin: forward template and ring buffer settings to existing decodebins
https://bugzilla.gnome.org/show_bug.cgi?id=744844
2015-02-24 10:02:19 +00:00
Luis de Bethencourt
8703d93bbf decodebin: move null check
Check if dbin->decode_chain is NULL before running drain_and_switch_chains()
because if it is, we shouldn't run that function or it will segfault.

CID #1271074
2015-02-23 17:24:56 +00:00
Sebastian Dröge
1dcd1a7479 decodebin: Only consider non-parser factories for generating the post-parser capsfilter caps
Otherwise if there are multiple parsers we would most likely break negotiation
of the stream-format/alignment wanted by the decoders as parsers generally
support all possible stream-formats and alignments.
2015-02-20 12:35:19 +02:00
Vincent Penquerc'h
a2ee84fa80 decodebin: fix deadlock between downward state change and pad addition
If caps on a newly added pad are NULL, analyze_new_pad will try to
acquire the chain lock to add a probe to the pad so the chain can
be built later. This comes from the streaming thread, in response
to headers or other buffers causing this pad to be added, so the
stream lock is taken.

Meanwhile, another thread might be destroying the chain from a
downward state change. This will cause the chain to be freed with
the chain lock taken, and some elements are set to NULL here, which
can include the parser. This causes pad deactivation, which tries
to take the element's pad's stream lock, deadlocking.

Fix this by keeping track of which elements need setting to NULL,
and only do this after the chain lock is released. Only the chain
manipulation needs to be locked, not the elements' state changes.

https://bugzilla.gnome.org/show_bug.cgi?id=741355
2015-02-19 13:38:35 +00:00
Vincent Penquerc'h
a848ac7abe decodebin: guard against the decode chain going while a pad is added
https://bugzilla.gnome.org/show_bug.cgi?id=741355
2015-02-19 13:38:35 +00:00
Vincent Penquerc'h
9036dc8594 decodebin: possible fix for deadlock when spamming "next song"
There was a deadlock between a thread changing decodebin/demuxer
state from PAUSED to READY, and another thread pushing data
when starting.

From the stack trace at
https://bug741355.bugzilla-attachments.gnome.org/attachment.cgi?id=292471,
I deduce the following is happening, though I did not reproduce the
problem so I'm not sure this patch fixes it.

The streaming thread (thread 2 in that stack trace) takes the demuxer's
sink pad's stream lock in gst_ogg_demux_perform_seek_pull and will
activate a new chain. This ends up causing the expose lock being taken
in _pad_added_cb in decodebin.

Meanwhile, a state changed is triggered on thread 1, which takes the
expose lock in decodebin in gst_decode_bin_change_state, then frees
the previous chain, which ends up calling gst_pad_stop_task on the
demuxer's task, which in turn takes the demuxer's sink pad's stream
lock, deadlocking as both threads are now waiting for each other.

https://bugzilla.gnome.org/show_bug.cgi?id=741355
2015-02-19 13:38:29 +00:00
Sebastian Dröge
2813e08210 uridecodebin: Reset the default query return value when the iterator has to resync 2015-02-19 01:30:05 +02:00
Sebastian Dröge
5da04ca3c7 uridecodebin: Let the latency query fail if one of the source queries fails 2015-02-19 01:22:26 +02:00
Olivier Crête
0487e1548d uridecodebin: Pass object, not GValue to debug print 2015-02-17 18:39:03 -05:00
Song Bing
fb9ca25f7f streamsynchronizer: Use the same waiting function for EOS and stream switches
Also improve the waiting condition for stream switches, which was assuming
before that the condition variable will only stop waiting once when it is
signaled. But the documentation says that there might be spurious wakeups.

https://bugzilla.gnome.org/show_bug.cgi?id=736655
2015-02-16 14:34:35 +02:00
Song Bing
2614f80309 streamsynchronizer: Send GAP events from the pads' streaming threads
Change the GAP events that are currently sent from the chain function of
the current pad to all other EOS pads. They should instead be sent from
their own streaming threads.

https://bugzilla.gnome.org/show_bug.cgi?id=736655
2015-02-16 14:12:28 +02:00
Song Bing
9f81931716 streamsynchronizer: Send GAP event to finish preroll when change state from PLAYING to PAUSED
Wait in the event function when EOS is received until all pads are EOS
and then forward the EOS event from each pads own event function.

Also send a new GAP event for EOS pads from the event function whenever
going from PLAYING->PAUSED by shortly waking up the GCond. This is needed
to allow sinks to pre-roll again, as they did not receive EOS yet because
we blocked that, but also will never get data again.

https://bugzilla.gnome.org/show_bug.cgi?id=736655
2015-02-16 14:09:43 +02:00
Stefan Sauer
c51bf98af4 playbin: improve debug log
Log the human readable pad_link_return desc as well.
2015-02-11 22:16:53 -08:00
Sebastian Dröge
8547594727 Improve and fix LATENCY query handling
This now follows the design docs everywhere, especially the maximum latency
handling.

https://bugzilla.gnome.org/show_bug.cgi?id=744106
2015-02-11 17:53:49 +02:00
Vincent Penquerc'h
661588b150 dcodebin2: fix lock/unlock mismatch on multiqueue overrun 2015-01-20 15:09:13 +00:00
Sebastian Dröge
2228d9f22b decodebin: Fix compilation 2015-01-17 14:51:48 +01:00
Branislav Katreniak
d16df7f70d decodebin: do call set_queue_size in no_more_pads_cb
Consider pipeline: gst-launch-1.0 playbin uri=http://example.com/a.ogg
Consider 128kbit audio stream.

As soon as uridecodebin detects the bitrate, it configures its input
queue2 max-size to 32000 bytes.
The 2MB buffer in multiqueue is nearly 2 orders of magnitude bigger.
This non-deterministically drives queue2 buffer anywhere from
100% to 0% until multiqueue is filled.

This patch sets multiqueue size to 5 buffers early in no_more_pads_cb.

Partly reverts commit db771185ed.

https://bugzilla.gnome.org/show_bug.cgi?id=740689
2015-01-16 20:58:40 +01:00
Vincent Penquerc'h
6ab711f3f1 decodebin: free old groups when switching groups
Old groups are freed with one switch's delay when switching groups.
They're freed in a scratch thread to avoid delaying the switch.
2015-01-16 15:55:10 +00:00
Thiago Santos
a5ed7afb4c decodebin: disable pad link checks as it has already been done
Decodebin has already added the element to the bin and should only
select caps compatible pads. It should disable the pad link checks
to avoid doing those again.

https://bugzilla.gnome.org/show_bug.cgi?id=742885
2015-01-14 10:33:52 -03:00
Sebastian Dröge
6521870077 Revert "decodebin: Only emit the drain signal for the main decode chain, not any subchains"
This reverts commit a391dfe17f.

It breaks gapless playback: https://bugzilla.gnome.org/show_bug.cgi?id=740045
2014-12-15 09:46:13 +01:00
Thibault Saunier
b9cbfcdeb4 playbin: Do not mix up stream type when getting stream combiner element
We were always returning the video stream combiner whatever stream type
combiner was wanted.
2014-12-11 13:47:58 +01:00
Thiago Santos
7e801a5f26 playbin2: always unref the combiner sinkpad when removing the srcpad
Create a function to do the pad cleanup of the GstSourceCombine struct
and use it to not forget to also cleanup the sink pad and fix a memory
leak.

https://bugzilla.gnome.org/show_bug.cgi?id=741198
2014-12-10 13:36:37 -03:00
Edward Hervey
6a2f017bfa playbin: Only check sinks which are in >= GST_STATE_READY
Otherwise we endup with bogus caps intersection (from the pad template
caps and not from what the actual hardware/device supports)

https://bugzilla.gnome.org/show_bug.cgi?id=738131
2014-12-05 07:58:44 +01:00
Sebastian Dröge
90eb93c2ef Don't compare booleans for equality to TRUE and FALSE
TRUE is 1, but every other non-zero value is also considered true. Comparing
for equality with TRUE would only consider 1 but not the others.
2014-12-01 09:51:12 +01:00
Thibault Saunier
35f6259b24 decodebin: Analyze source pad before setting to PAUSED for 'simple demuxers'
Before we were setting them to PAUSED and (much) later connecting to
their source pad caps notify signal.

There was a race where that demuxer was pushing a caps and later a buffer
on its source pad when we were not even connected to its source pad caps notify
signal leading to decodebin missing the information and not keeping on
building the pipeline on CAPS event thus the demuxer was posting an ERROR
(not linked) message on the bus. This need to be done for 'simple
demuxers' because those have one ALWAYS source pad, not like usual demuxers
that have several dynamic source pads.

A "simple demuxer" is a demuxer that has one and only one ALWAYS source
pad.

https://bugzilla.gnome.org/show_bug.cgi?id=740693
2014-11-26 19:38:48 +01:00
Mathieu Duponchelle
68edf0ebd6 decodebin2: Take STREAM_LOCK before sending sticky events.
There was a race where:

1) we would put the element to PAUSED
2) It would get data sent to it from upstream
3) It would thus send caps
3) caps_notify_cb would continue autoplugging
4) caps would flow downstream, the last pad would get exposed
5) we were still not done sending the sticky events

Taking the stream lock on the new element's sinkpad and only
releasing it when sticky events have all been sent prevents
the caps from reaching the source pad of the element before
we're all set.

https://bugzilla.gnome.org/show_bug.cgi?id=740694
2014-11-26 19:38:48 +01:00
Andrei Sarakeev
e5c6f59140 playsink: Reset mute property of the sink to playsink's value when setting up the audio chain
Otherwise the following can happen:
1. set mute=true
2. play media1 (Ok)
3. play media without audio (audiochain removed)
4. play media2 (audiochain created, mute=*false*)

https://bugzilla.gnome.org/show_bug.cgi?id=740675
2014-11-25 10:23:50 +01:00
Tim-Philipp Müller
9c5d53c7e3 docs: fix some gtk-doc warnings
Deprecated entities found in documentation for xyz:Long_description
.
2014-11-15 23:13:42 +00:00
Andreas Frisch
bae96c85ee subtitleoverlay: return available factory CAPS instead of ANY on CAPS query
https://bugzilla.gnome.org/show_bug.cgi?id=739536
2014-11-03 08:20:13 +01:00
Sebastian Dröge
8b8b8ae2e8 Revert "decodebin: fix the autoplugging of parser elements"
This reverts commit 2b0d392741.

This breaks cases where an actual second parser is required after the parser,
e.g. to do timestamp corrections.

See https://bugzilla.gnome.org/show_bug.cgi?id=738416
2014-10-26 11:04:47 +01:00
Sebastian Dröge
2da56de19f Revert "decodebin: Fix locking"
This reverts commit aa94d5dc9a.
2014-10-26 11:04:38 +01:00
Sebastian Dröge
aa94d5dc9a decodebin: Fix locking
The chain mutex needs to be locked when looking at chain->elements. Move code
around a bit to require only one lock() and unlock().
2014-10-21 13:32:19 +02:00
Sreerenj Balachandran
2b0d392741 decodebin: fix the autoplugging of parser elements
If there are two parser elements available for the same media format,
then decodebin is autoplugging an extra capsfilter and parser irrespective
of caps and rank. So restrict the decodebin from autoplugging multiple parser
elements back to back in adjacent positions with in a single DecodeChain
for the same media format.

https://bugzilla.gnome.org/show_bug.cgi?id=738416
2014-10-21 13:32:19 +02:00
Sreerenj Balachandran
a24db77217 decodebin: optimize the code a bit by avoiding unnecessary string comparisons
https://bugzilla.gnome.org/show_bug.cgi?id=738416
2014-10-21 11:05:53 +02:00
Sreerenj Balachandran
f60da86ae2 decodebin: Fix typo in comment
https://bugzilla.gnome.org/show_bug.cgi?id=738416
2014-10-21 11:05:53 +02:00
Heinrich Fink
4497b73806 playsink: Use correct property enum value for video-filter property installation 2014-10-10 12:14:57 +03:00
Andrei Sarakeev
a391dfe17f decodebin: Only emit the drain signal for the main decode chain, not any subchains
https://bugzilla.gnome.org/show_bug.cgi?id=738064
2014-10-07 14:48:54 +03:00
Sebastian Dröge
72eb84a900 decodebin: Free factories array when delaying autoplugging due to non-final caps 2014-10-06 10:15:13 +03:00
Aurélien Zanelli
796fd16550 decodebin: unref decode pad after usage
https://bugzilla.gnome.org/show_bug.cgi?id=737757
2014-10-06 09:53:39 +03:00
Andres Gomez
09872442f8 uridecodebin: Removed setting "iradio-mode" property in the source element
The "iradio-mode" property used to have a default FALSE value in HTTP
source elements but now it should default to TRUE or just do not exist
as a property so it is not really needed to set it any more in
uridecodebin.

Apart from that this code could've never worked as uridecodebin looks for a
string-typed iradio-mode property, but it's a boolean in all sources.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=725383
2014-10-02 09:50:48 +03:00
Andrei Sarakeev
2133a98eb1 playbin: Don't leak input-selector sinkpads
https://bugzilla.gnome.org/show_bug.cgi?id=736861
2014-09-18 12:52:02 +03:00
Sebastian Dröge
52e97f59ba playsink: Add audio/videoconvert in front of the audio/video-filters
audioresample and videoscale is something the application will have to do if
required, but we can at least help here by adding the
audioconvert/videoconvert elements.

https://bugzilla.gnome.org/show_bug.cgi?id=735748
2014-09-16 21:42:46 +03:00
Thiago Santos
3657929e1f decodebin: protect buffering message handling
Use the object lock to avoid concurrent processing which leads
to small disasters (assertions or crashes)
2014-09-11 17:16:18 -03:00
George Kiagiadakis
a2122f04ec playbin: filter out buffering messages when switching uri
When switching URI from about-to-finish, playbin starts decoding the new
URI and the queue2 inside uridecodebin starts emitting buffering messages
immediately. However, the queue(s) inside playsink still have buffers to
play and the pipeline doesn't need to pause for buffering, so we should
not send those buffering messages up to the application, otherwise there
is an audible glitch caused by pausing the pipeline for a very short time.

https://bugzilla.gnome.org/show_bug.cgi?id=727255
2014-09-05 12:44:27 -03:00
Sebastian Dröge
5cbefaa9a2 decodebin: Also include the raw caps in the error message, not just the human readable description 2014-09-02 15:37:38 +03:00
Sebastian Dröge
56899b596e decodebin: Include codec description for missing plugins in the error message
If we had plugins and an error occurred we only include the error message
caused by this, otherwise we will include the codec description as generated
from the caps.

This allows to detect which exact codec was missing instead of getting a
generic "no suitable decoders found" error message.
2014-09-02 13:00:48 +03:00
Sebastian Dröge
2434af3d31 playsinkconvertbin: setcaps() always returns TRUE and the return value is unused
Change it to a void return value. The caps are forwarded afterwards via
gst_pad_event_default() and not inside this function.

CID 1226477
2014-08-28 17:13:05 +03:00
Sebastian Dröge
a5cf0a4572 decodebin: Include information from the error messages of tried but failed elements in the missing plugin errors 2014-08-25 21:01:16 +03:00
Sebastian Dröge
22a138b716 decodebin: Initialize local variables for every retry 2014-08-25 21:01:16 +03:00
Sebastian Dröge
21e9f84486 decodebin: Remove error case that resulted in two error messages
We already send one in gst_decode_bin_expose() for this case. Only
if we're unable to typefind the caps another error message is needed.
2014-08-25 21:01:16 +03:00
Thiago Santos
98ed3ddc8f playsinkconvertbin: only intersect with the filter at the end
Otherwise we might change some capsfeatures from ANY to the specific
value from the filter and do not filter those out in case the
sink doesn't support them

https://bugzilla.gnome.org/show_bug.cgi?id=734822
2014-08-15 18:24:36 -03:00
Thiago Santos
14d79a3a47 decodebin: handle group switching for deadend group
Gracefully handle switching groups that all pads are deadend.

This can happen when quickly switching programs on mpegts as the
output is unaligned it can happen that not enough data was accumulated at
parsers to generate any buffers, causing the stream to receive EOS before
any data can be decoded.

To handle this scenario, the _expose function now also gets if there is
any next group to be exposed along with the list of endpads. If there are
no endpads and there is another group to expose it will switch to this next
group and then retry exposing the streams.

Also, the requirement to only switch from the chain that has the endpad had
to be modified to care for when the drainpad is NULL

https://bugzilla.gnome.org/show_bug.cgi?id=733169
2014-08-13 18:51:37 +03:00
Thiago Santos
9c09c8ae17 decodebin: consider all deadend pads as drained
Otherwise when switching out a group with a deadend pad it will block
as it would be waiting for EOS on a deadend that already got one

https://bugzilla.gnome.org/show_bug.cgi?id=733169
2014-08-13 18:51:37 +03:00
Sebastian Dröge
d280bba126 playsinkconvertbin: Make sure to intersect raw caps with our converter caps
Otherwise we end up allowing video/x-raw with arbitrary caps features that are
not handled by our converters.

https://bugzilla.gnome.org/show_bug.cgi?id=734683
2014-08-13 14:28:05 +03:00
Sebastian Dröge
59fb749ef6 decodebin: Remove buffering special casing for adaptive streaming demuxers
They output smaller buffers now and we should be able to handle the buffering
limits like in every other situation now.
2014-08-11 10:57:43 +02:00
Sebastian Dröge
a0a9fd004b playbin: Keep a reference to the playsink sinkpads
Otherwise playsink might get shut down without us noticing
that our pad references are gone now.

Probably fixes https://bugzilla.gnome.org/show_bug.cgi?id=733165
2014-08-01 15:00:46 +02:00