Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/Makefile.am:
* gst/gstconfig.h.in:
* gst/gstobject.c: (gst_object_class_init),
(gst_signal_object_class_init):
* gst/gstobject.h:
2nd attempt to have a xml-less build as a joined effort of #413123
and #421480.
Original commit message from CVS:
Patch by: Marc-Andre Lureau <marcandre dot lureau at gmail dot com>
* gst/parse/Makefile.am:
* gst/parse/grammar.y:
* gst/parse/parse.l:
Make the parser reentrant and recursively callable. This requires flex
>= 2.5.31, for older versions pregenerated sources are used as we
can't bump the build dependency. Finally fixes#349180.
* gst/gstparse.c: (gst_parse_launch):
Drop the HAVE_MT_SAVE_FLEX #ifdefs as we always use a new enough flex
now anyway.
* docs/gst/Makefile.am:
* docs/gst/Makefile.am:
* gst/parse/grammar.tab.pre.c: (__gst_parse_strdup),
(__gst_parse_strfree), (__gst_parse_link_new),
(__gst_parse_link_free), (__gst_parse_chain_new),
(__gst_parse_chain_free), (SET_ERROR), (YYPRINTF),
(gst_parse_element_set), (gst_parse_free_link),
(gst_parse_found_pad), (gst_parse_perform_delayed_link),
(gst_parse_perform_link), (yytnamerr), (yysyntax_error), (yyerror),
(_gst_parse_launch):
* gst/parse/grammar.tab.pre.h:
* gst/parse/lex._gst_parse_yy.pre.c: (PRINT), (yy_get_next_buffer),
(yy_get_previous_state), (yy_try_NUL_trans), (input),
(_gst_parse_yyrestart), (_gst_parse_yy_switch_to_buffer),
(_gst_parse_yy_load_buffer_state), (_gst_parse_yy_create_buffer),
(_gst_parse_yy_delete_buffer), (_gst_parse_yy_init_buffer),
(_gst_parse_yy_flush_buffer), (_gst_parse_yypush_buffer_state),
(_gst_parse_yypop_buffer_state),
(_gst_parse_yyensure_buffer_stack), (_gst_parse_yy_scan_buffer),
(_gst_parse_yy_scan_string), (_gst_parse_yy_scan_bytes),
(yy_fatal_error), (_gst_parse_yyget_extra),
(_gst_parse_yyget_lineno), (_gst_parse_yyget_column),
(_gst_parse_yyget_in), (_gst_parse_yyget_out),
(_gst_parse_yyget_leng), (_gst_parse_yyget_text),
(_gst_parse_yyset_extra), (_gst_parse_yyset_lineno),
(_gst_parse_yyset_column), (_gst_parse_yyset_in),
(_gst_parse_yyset_out), (_gst_parse_yyget_debug),
(_gst_parse_yyset_debug), (_gst_parse_yyget_lval),
(_gst_parse_yyset_lval), (_gst_parse_yylex_init),
(yy_init_globals), (_gst_parse_yylex_destroy), (yy_flex_strncpy),
(yy_flex_strlen), (_gst_parse_yyalloc), (_gst_parse_yyrealloc),
(_gst_parse_yyfree):
If the installed flex version is too old use pre-generated parser
sources. These pre-generated parser sources are always updated when
the actual flex/bison sources change but require everybody who wants
to change something in the parser to have flex >= 2.5.31 installed.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Remove bogus addition for API I didn't end up keeping.
* libs/gst/base/gstbasesrc.h:
Mention Since: 0.10.13 in the documentation.
Add the API keyword to the previous ChangeLog entry.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_default_prepare_seek_segment),
(gst_base_src_prepare_seek_segment), (gst_base_src_perform_seek):
* libs/gst/base/gstbasesrc.h:
Allow basesrc derived classes to execute seeks in other formats
by providing a prepare_seek_segment vmethod. Sub-classes can choose
to prepare the GstSegment in any format that their perform_seek method
will be able to understand. The default implementation provides the
old behaviour of attempting to convert the seek offsets to the
configured native format.
Original commit message from CVS:
* docs/faq/gst-uninstalled:
don't get empty paths on the PATH variables
* gst/gstpad.c (gst_pad_is_active, gst_pad_set_blocked_async):
Don't format for the uncommon terminal width of 84 characters.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.c: (gst_clock_adjust_unlocked),
(gst_clock_unadjust_unlocked), (gst_clock_set_calibration):
* gst/gstclock.h:
Improve _adjust_unlocked() so that it overflows less.
Add gst_clock_unadjust_unlocked to convert from external time to
internal time based on calibration.
Add some more debug.
API: GstClock::gst_clock_unadjust_unlocked()
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More work on proposal for new core api.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
API: GST_BASE_TRANSFORM_LOCK/UNLOCK added
* libs/gst/controller/gstcontroller.c:
(on_object_controlled_property_changed),
(gst_controller_sync_values),
(gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
Less verbose logging add docs for unimplemented parts and correctly
return when using unavailable parts.
Original commit message from CVS:
* docs/design/draft-klass.txt:
Add example that needs more thinking.
* docs/design/draft-missing-plugins.txt:
More thoughts about wtrapper plugins.
* docs/random/ensonic/embedded.txt:
* docs/random/ensonic/profiling.txt:
More design work.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstmessage.c: (gst_message_new_async_start),
(gst_message_new_async_done), (gst_message_parse_info),
(gst_message_parse_async_start):
* gst/gstmessage.h:
Add ASYNC_START and ASYNC_DONE messages to prepare for latency
support.
Original commit message from CVS:
* docs/design/draft-tagreading.txt:
* docs/random/ensonic/audiobaseclasses.txt:
Do some Architect work.
* gst/gstobject.c: (gst_object_set_name):
Add a WARNING.
* gst/gstpad.c:
Add docs that point from gst_pad_get_range to gst_pad_pull_range
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* docs/design/Makefile.am:
* docs/design/draft-missing-plugins.txt:
* docs/random/draft-missing-plugins.txt:
Some small updates: update plugin system identifier prefix
('gstreamer.net' to 'gstreamer'), mention our new install
API in libgstbaseutils rather than libgimme-codec, add
reference to the online docs.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.h:
Fix up documentation to link to the correct GstGError section.
Add GST_ELEMENT_INFO macro since someone else added a Info message.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full):
Make the ghostpad a parent of the internal pad again for better backward
compatibility. Don't write code that relies on this however.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_link_check_hierarchy):
Require that parents should be GstElements in the hierarchy check.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full), (gst_ghost_pad_set_target):
Do not set the internal pad as a parent anymore so we can avoid
hierarchy linking errors when the ghostpad has no parent yet. This also
fixes failed activation because of unlinked internal pads, which in
turn fixes the impossible case where you have to activate a pad before
you can add it to a running element.
Also fix the docs.
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_set_active), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_check_pull_range):
Add some more debug info.
Mark activation mode in pre_activate so that we don't try to activate in
endless loops. Fixes#385084.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small update.
* gst/gstsegment.c: (gst_segment_set_seek):
Revert old bogus change that should make seeking work again.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
* docs/random/ensonic/interfaces.txt:
* docs/random/ensonic/receipies.txt:
Possible dynamic reconnection api, plus some type fixes the other two
docs.
Original commit message from CVS:
* docs/design/draft-klass.txt:
Add existing category analysis.
* gst/gstcaps.c:
Fix doc example, framerate is a fraction.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Slight redesign to allow for dynamic latency adjustments.
* docs/design/part-negotiation.txt:
Fix some typos.
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad),
(gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
API: Add function to specify a destroy notification for custom
GstCollectData when adding new pads in GstCollectPads (#402393).
Original commit message from CVS:
* docs/gst/gstreamer.types.in:
* gst/gstregistry.c: (gst_registry_class_init):
Document registry signals and make gtk-doc pick them up (#401381).
Original commit message from CVS:
* docs/pwg/building-testapp.xml:
Add some audioconverts and audioresample to the pipeline, and some
more comments and error handling.
Original commit message from CVS:
Patch by: David Schleef <ds at schleef dot org>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstadapter.c: (gst_adapter_copy):
* libs/gst/base/gstadapter.h:
API: gst_adapter_copy() that can reduce the amount of memcpy when
getting data from the adapter. Fixes#388201.
Original commit message from CVS:
Patch by: Carlos Sanmartin Dominguez <csanmartin@igalia.com>
* docs/manual/basics-bus.xml:
Fix example code, gst_element_unref() doesn't exist any longer.
Original commit message from CVS:
* docs/faq/gst-uninstalled:
Add gst-plugins-base/gst/utils/ to LD_LIBRARY_PATH so that plugins
depending on libgstbaseutils can work in uninstalled environment.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsttaglist.c: (_gst_tag_initialize):
* gst/gsttaglist.h:
add tag support for beat-per-minute
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Some additions: mention new API that is supposed to be used at the
various stages; short blob about new gst-inspect introspection
option; mention potential future problem with plugins that have
a dynamic list of elements (such as ladspa, pitfdll, libvisual).
Original commit message from CVS:
2007-01-10 Andy Wingo <wingo@pobox.com>
* docs/design/part-negotiation.txt: Update with, um, one way that
pull-mode negotiation might work?
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_get_allowed_caps): Remove the restriction
that the pad must be a src pad; makes sense to call it the other
way in pull mode, and the logic is symmetric anyway.
Original commit message from CVS:
* docs/design/part-states.txt:
two tiny additional comments
* gst/gststructure.c:
doc fixing
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
disable test for now, unless it gets fixed
Original commit message from CVS:
* docs/manual/basics-bus.xml:
No, gst_main_loop does not exist. Its g_main_loop.
Discovered by somebody who abused the copy-paste technique of coding :)
Original commit message from CVS:
=== release 0.10.11 ===
2006-12-06 Jan Schmidt <thaytan@mad.scientist.com>
* configure.ac:
releasing 0.10.11, "Love never runs on time"
Original commit message from CVS:
* docs/libs/Makefile.am:
* docs/libs/gstreamer-libs.types:
add types of base classes to enable gobject specific stuff in the docs
* docs/random/ensonic/embedded.txt:
more ideas about isolating platform specific things
Original commit message from CVS:
* docs/random/ensonic/embedded.txt:
* docs/random/ensonic/profiling.txt:
* docs/random/ensonic/receipies.txt:
more thinking
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Update: use element message instead of adding a new message
type to the core; don't provide GStreamer API to initiate the
plugin download, just provide API to compose the strings needed
and let an external libgimmestuff handle the rest.
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Commit initial draft about how to deal with missing plugins,
needs work (API too).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
add new API and fix the build
* gst/gstbin.c: (gst_bin_recalc_state):
* gst/gstelement.c: (gst_element_message_full),
(gst_element_get_state_func), (gst_element_set_state_func):
use new API and improve logging
* gst/gstutils.c: (gst_element_state_change_return_get_name):
* gst/gstutils.h:
API: add function to get StateChangereturn names to improve logs
Original commit message from CVS:
* docs/design/part-events.txt:
Update some docs.
* docs/design/part-block.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
Revert BLOCKING patch, it tries to be smart without really having a
clear idea what or how. So, now we discard all FLUSHING events again on
a blocking pad. Should fix gnonlin again.
Original commit message from CVS:
* docs/random/ensonic/distributed.txt:
add some ideas about doing distributed processing
* docs/random/ensonic/profiling.txt:
get_rusage look promising
Original commit message from CVS:
* docs/design/part-live-source.txt:
describe howto handle latency
* docs/random/ensonic/profiling.txt:
more ideas
* tools/gst-plot-timeline.py:
fix log parsing for solaris, remove unused function
Original commit message from CVS:
* docs/plugins/gstreamer-plugins.args:
* docs/plugins/inspect/plugin-coreelements.xml:
* docs/plugins/inspect/plugin-coreindexers.xml:
Update element args.
* gst/gstsystemclock.c:
Small comment update.
* plugins/elements/gsttee.c: (gst_tee_class_init), (gst_tee_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_buffer_alloc), (gst_tee_sink_activate_push),
(gst_tee_sink_activate_pull):
* plugins/elements/gsttee.h:
Some tee loving:
Add default property defines.
Implement release pad function.
Give properties better blubs etc.
Activate pads before adding them to a running tee.
Do simple buffer_alloc on the first requested pad.
Post error when activation fails.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_tag_list_is_empty):
* gst/gsttaglist.h:
* docs/gst/gstreamer-sections.txt:
API: add gst_tag_list_is_empty() (#360467).
* tests/check/gst/gsttag.c: (GST_START_TEST):
And a test case.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/gstconfig.h.in:
* gst/gstelement.h:
* gst/gstinfo.h:
Add GST_USING_PRINTF_EXTENSION to gstconfig.h so that we know
whether we can use G_GNUC_PRINTF in other header files and at
least check the printf format/arguments of debug messages and
GST_ELEMENT_ERROR messages when the printf extension is not
being used.
Replace more tabs with spaces in gstinfo.h and remove two spurious
function declarations in GST_DISABLE_DEBUG part with macros.
Original commit message from CVS:
* docs/design/part-block.txt:
Further explain the use of flushing on blocked pads.
* docs/gst/gstreamer-sections.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
* gst/gstpad.h:
Added new GstPadFlag : GST_PAD_BLOCKING.
Adds the notion of pads really blocking, which enables to properly
handle FLUSH_START/FLUSH_STOP events on blocked pads.
Fixes#358999
API: gst_pad_is_blocking()
API: GST_PAD_IS_BLOCKING() macro
API: GST_PAD_BLOCKING GstPadFlag
Original commit message from CVS:
* docs/random/moving-plugins:
Make it clear that the "compiled-in descriptions" really mean
the element details.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll):
Update docs.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_get_range), (gst_base_src_activate_push):
* libs/gst/base/gstbasesrc.h:
Added function to block while waiting for PLAYING, this function
is used by live sources that block on the clock.
API: gst_base_src_wait_playing()
Original commit message from CVS:
* docs/pwg/building-boiler.xml:
* plugins/elements/gstcapsfilter.c:
More G_OBJECT macro fixing. Also Fix some details on the plugin-stamp
section.
Original commit message from CVS:
* configure.ac:
* docs/manual/advanced-autoplugging.xml:
* tests/examples/Makefile.am:
* tests/examples/manual/.cvsignore:
* tests/examples/manual/Makefile.am:
* tests/examples/manual/extract.pl:
Extract the manual examples again like we used to do.
Fix one of them.
