gstreamer/tests/check/gst/gstbin.c

1572 lines
52 KiB
C
Raw Normal View History

/* GStreamer
* Copyright (C) 2005 Wim Taymans <wim@fluendo.com>
* Copyright (C) 2005 Thomas Vander Stichele <thomas at apestaart dot org>
*
* gstbin.c: Unit test for GstBin
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <gst/check/gstcheck.h>
#include <gst/base/gstbasesrc.h>
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
static void
pop_async_done (GstBus * bus)
{
GstMessage *message;
GST_DEBUG ("popping async-done message");
message = gst_bus_poll (bus, GST_MESSAGE_ASYNC_DONE, -1);
fail_unless (message && GST_MESSAGE_TYPE (message)
== GST_MESSAGE_ASYNC_DONE, "did not get GST_MESSAGE_ASYNC_DONE");
gst_message_unref (message);
GST_DEBUG ("popped message");
}
static void
pop_messages (GstBus * bus, int count)
{
GstMessage *message;
int i;
GST_DEBUG ("popping %d messages", count);
for (i = 0; i < count; ++i) {
message = gst_bus_poll (bus, GST_MESSAGE_STATE_CHANGED, -1);
fail_unless (message && GST_MESSAGE_TYPE (message)
== GST_MESSAGE_STATE_CHANGED, "did not get GST_MESSAGE_STATE_CHANGED");
gst_message_unref (message);
}
GST_DEBUG ("popped %d messages", count);
}
static GstStaticPadTemplate srctemplate = GST_STATIC_PAD_TEMPLATE ("src",
GST_PAD_SRC,
GST_PAD_ALWAYS,
GST_STATIC_CAPS_ANY);
static gpointer
push_one_eos (GstPad * pad)
{
GST_DEBUG_OBJECT (pad, "Pushing EOS event");
gst_pad_push_event (pad, gst_event_new_eos ());
return NULL;
}
static gpointer
push_one_stream_start (GstPad * pad)
{
GST_DEBUG_OBJECT (pad, "Pushing STREAM_START event");
gst_pad_push_event (pad, gst_event_new_stream_start ("test"));
return NULL;
}
GST_START_TEST (test_interface)
{
GstBin *bin, *bin2;
GstElement *filesrc;
GstIterator *it;
2011-03-17 10:52:42 +00:00
GValue item = { 0, };
bin = GST_BIN (gst_bin_new (NULL));
fail_unless (bin != NULL, "Could not create bin");
filesrc = gst_element_factory_make ("filesrc", NULL);
fail_unless (filesrc != NULL, "Could not create filesrc");
fail_unless (GST_IS_URI_HANDLER (filesrc), "Filesrc not a URI handler");
gst_bin_add (bin, filesrc);
fail_unless (gst_bin_get_by_interface (bin, GST_TYPE_URI_HANDLER) == filesrc);
gst_object_unref (filesrc);
it = gst_bin_iterate_all_by_interface (bin, GST_TYPE_URI_HANDLER);
fail_unless (it != NULL);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
fail_unless (g_value_get_object (&item) == (gpointer) filesrc);
g_value_reset (&item);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_DONE);
gst_iterator_free (it);
gst_bin_add_many (bin,
gst_element_factory_make ("identity", NULL),
gst_element_factory_make ("identity", NULL),
gst_element_factory_make ("identity", NULL), NULL);
it = gst_bin_iterate_all_by_interface (bin, GST_TYPE_URI_HANDLER);
fail_unless (it != NULL);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
fail_unless (g_value_get_object (&item) == (gpointer) filesrc);
g_value_reset (&item);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_DONE);
gst_iterator_free (it);
bin2 = bin;
bin = GST_BIN (gst_bin_new (NULL));
fail_unless (bin != NULL);
gst_bin_add_many (bin,
gst_element_factory_make ("identity", NULL),
gst_element_factory_make ("identity", NULL),
GST_ELEMENT (bin2), gst_element_factory_make ("identity", NULL), NULL);
it = gst_bin_iterate_all_by_interface (bin, GST_TYPE_URI_HANDLER);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
fail_unless (g_value_get_object (&item) == (gpointer) filesrc);
g_value_reset (&item);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_DONE);
gst_iterator_free (it);
gst_bin_add (bin, gst_element_factory_make ("filesrc", NULL));
gst_bin_add (bin2, gst_element_factory_make ("filesrc", NULL));
it = gst_bin_iterate_all_by_interface (bin, GST_TYPE_URI_HANDLER);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
g_value_reset (&item);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
g_value_reset (&item);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
g_value_reset (&item);
fail_unless (gst_iterator_next (it, &item) == GST_ITERATOR_DONE);
2011-03-17 10:52:42 +00:00
g_value_unset (&item);
gst_iterator_free (it);
gst_object_unref (bin);
}
GST_END_TEST;
GST_START_TEST (test_eos)
{
GstBus *bus;
GstElement *pipeline, *sink1, *sink2;
GstMessage *message;
GstPad *pad1, *pad2;
GThread *thread1, *thread2;
pipeline = gst_pipeline_new ("test_eos");
bus = gst_pipeline_get_bus (GST_PIPELINE (pipeline));
sink1 = gst_element_factory_make ("fakesink", "sink1");
sink2 = gst_element_factory_make ("fakesink", "sink2");
gst_bin_add_many (GST_BIN (pipeline), sink1, sink2, NULL);
pad1 = gst_check_setup_src_pad_by_name (sink1, &srctemplate, "sink");
pad2 = gst_check_setup_src_pad_by_name (sink2, &srctemplate, "sink");
gst_pad_set_active (pad1, TRUE);
gst_pad_set_active (pad2, TRUE);
fail_if (gst_element_set_state (GST_ELEMENT (pipeline),
GST_STATE_PLAYING) == GST_STATE_CHANGE_FAILURE);
/* Send one EOS to sink1 */
thread1 = g_thread_new ("thread1", (GThreadFunc) push_one_eos, pad1);
/* Make sure the EOS message is not sent */
message =
gst_bus_poll (bus, GST_MESSAGE_ERROR | GST_MESSAGE_EOS, 2 * GST_SECOND);
fail_if (message != NULL);
/* Send one EOS to sink2 */
thread2 = g_thread_new ("thread2", (GThreadFunc) push_one_eos, pad2);
/* Make sure the EOS message is sent then */
message = gst_bus_poll (bus, GST_MESSAGE_ERROR | GST_MESSAGE_EOS, -1);
fail_if (message == NULL);
fail_unless (GST_MESSAGE_TYPE (message) == GST_MESSAGE_EOS);
gst_message_unref (message);
/* Cleanup */
g_thread_join (thread1);
g_thread_join (thread2);
gst_element_set_state (GST_ELEMENT (pipeline), GST_STATE_NULL);
gst_pad_set_active (pad1, FALSE);
gst_pad_set_active (pad2, FALSE);
gst_check_teardown_src_pad (sink1);
gst_check_teardown_src_pad (sink2);
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
GST_START_TEST (test_stream_start)
{
GstBus *bus;
GstElement *pipeline, *sink1, *sink2;
GstMessage *message;
GstPad *pad1, *pad2;
GThread *thread1, *thread2;
pipeline = gst_pipeline_new ("test_stream_start");
bus = gst_pipeline_get_bus (GST_PIPELINE (pipeline));
sink1 = gst_element_factory_make ("fakesink", "sink1");
sink2 = gst_element_factory_make ("fakesink", "sink2");
gst_bin_add_many (GST_BIN (pipeline), sink1, sink2, NULL);
pad1 = gst_check_setup_src_pad_by_name (sink1, &srctemplate, "sink");
pad2 = gst_check_setup_src_pad_by_name (sink2, &srctemplate, "sink");
gst_pad_set_active (pad1, TRUE);
gst_pad_set_active (pad2, TRUE);
fail_if (gst_element_set_state (GST_ELEMENT (pipeline),
GST_STATE_PLAYING) == GST_STATE_CHANGE_FAILURE);
/* Send one STREAM_START to sink1 */
thread1 = g_thread_new ("thread1", (GThreadFunc) push_one_stream_start, pad1);
/* Make sure the STREAM_START message is not sent */
message =
gst_bus_poll (bus, GST_MESSAGE_ERROR | GST_MESSAGE_STREAM_START,
2 * GST_SECOND);
fail_if (message != NULL);
/* Send one STREAM_START to sink2 */
thread2 = g_thread_new ("thread2", (GThreadFunc) push_one_stream_start, pad2);
/* Make sure the STREAM_START message is sent then */
message =
gst_bus_poll (bus, GST_MESSAGE_ERROR | GST_MESSAGE_STREAM_START, -1);
fail_if (message == NULL);
fail_unless (GST_MESSAGE_TYPE (message) == GST_MESSAGE_STREAM_START);
gst_message_unref (message);
/* Cleanup */
g_thread_join (thread1);
g_thread_join (thread2);
gst_element_set_state (GST_ELEMENT (pipeline), GST_STATE_NULL);
gst_pad_set_active (pad1, FALSE);
gst_pad_set_active (pad2, FALSE);
gst_check_teardown_src_pad (sink1);
gst_check_teardown_src_pad (sink2);
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
GST_START_TEST (test_message_state_changed)
{
GstBin *bin;
GstBus *bus;
GstMessage *message;
GstStateChangeReturn ret;
bin = GST_BIN (gst_bin_new (NULL));
fail_unless (bin != NULL, "Could not create bin");
ASSERT_OBJECT_REFCOUNT (bin, "bin", 1);
bus = g_object_new (gst_bus_get_type (), NULL);
gst_element_set_bus (GST_ELEMENT_CAST (bin), bus);
/* change state, spawning a message, causing an incref on the bin */
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_READY);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
ASSERT_OBJECT_REFCOUNT (bin, "bin", 2);
/* get and unref the message, causing a decref on the bin */
message = gst_bus_poll (bus, GST_MESSAGE_STATE_CHANGED, -1);
fail_unless (message && GST_MESSAGE_TYPE (message)
== GST_MESSAGE_STATE_CHANGED, "did not get GST_MESSAGE_STATE_CHANGED");
gst_message_unref (message);
ASSERT_OBJECT_REFCOUNT (bin, "bin", 1);
/* clean up */
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_NULL);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
gst_object_unref (bus);
gst_object_unref (bin);
}
GST_END_TEST;
GST_START_TEST (test_message_state_changed_child)
{
GstBin *bin;
GstElement *src;
GstBus *bus;
GstMessage *message;
GstStateChangeReturn ret;
bin = GST_BIN (gst_bin_new (NULL));
fail_unless (bin != NULL, "Could not create bin");
ASSERT_OBJECT_REFCOUNT (bin, "bin", 1);
bus = g_object_new (gst_bus_get_type (), NULL);
gst_element_set_bus (GST_ELEMENT_CAST (bin), bus);
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
gst_bin_add (bin, src);
ASSERT_OBJECT_REFCOUNT (bin, "bin", 1);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
/* change state, spawning two messages:
* - first for fakesrc, forwarded to bin's bus, causing incref on fakesrc
* - second for bin, causing an incref on the bin */
GST_DEBUG ("setting bin to READY");
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_READY);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
ASSERT_OBJECT_REFCOUNT (src, "src", 2);
ASSERT_OBJECT_REFCOUNT (bin, "bin", 2);
/* get and unref the message, causing a decref on the src */
message = gst_bus_poll (bus, GST_MESSAGE_STATE_CHANGED, -1);
fail_unless (message && GST_MESSAGE_TYPE (message)
== GST_MESSAGE_STATE_CHANGED, "did not get GST_MESSAGE_STATE_CHANGED");
fail_unless (message->src == GST_OBJECT (src));
gst_message_unref (message);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (bin, "bin", 2);
/* get and unref message 2, causing a decref on the bin */
message = gst_bus_poll (bus, GST_MESSAGE_STATE_CHANGED, -1);
fail_unless (message && GST_MESSAGE_TYPE (message)
== GST_MESSAGE_STATE_CHANGED, "did not get GST_MESSAGE_STATE_CHANGED");
fail_unless (message->src == GST_OBJECT (bin));
gst_message_unref (message);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (bin, "bin", 1);
/* clean up */
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_NULL);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
gst_object_unref (bus);
gst_object_unref (bin);
}
GST_END_TEST;
GST_START_TEST (test_message_state_changed_children)
{
GstPipeline *pipeline;
GstElement *src, *sink;
GstBus *bus;
GstStateChangeReturn ret;
GstState current, pending;
pipeline = GST_PIPELINE (gst_pipeline_new (NULL));
fail_unless (pipeline != NULL, "Could not create pipeline");
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
/* need to silence the element as the deep_notify refcounts the
* parents while running */
g_object_set (G_OBJECT (src), "silent", TRUE, NULL);
gst_bin_add (GST_BIN (pipeline), src);
sink = gst_element_factory_make ("fakesink", NULL);
/* need to silence the element as the deep_notify refcounts the
* parents while running */
g_object_set (G_OBJECT (sink), "silent", TRUE, NULL);
fail_if (sink == NULL, "Could not create fakesink");
gst_bin_add (GST_BIN (pipeline), sink);
fail_unless (gst_element_link (src, sink), "could not link src and sink");
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
bus = gst_pipeline_get_bus (pipeline);
/* change state to READY, spawning three messages */
GST_DEBUG ("setting pipeline to READY");
ret = gst_element_set_state (GST_ELEMENT (pipeline), GST_STATE_READY);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
/* each object is referenced by a message */
ASSERT_OBJECT_REFCOUNT (bus, "bus", 2);
ASSERT_OBJECT_REFCOUNT (src, "src", 2);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 2);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 2);
pop_messages (bus, 3);
fail_if (gst_bus_have_pending (bus), "unexpected pending messages");
ASSERT_OBJECT_REFCOUNT (bus, "bus", 2);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
/* change state to PAUSED, spawning four messages */
/* STATE_CHANGED (NULL => READY)
* STREAM_START
* ASYNC_DONE
* STATE_CHANGED (READY => PAUSED)
*/
GST_DEBUG ("setting pipeline to PAUSED");
ret = gst_element_set_state (GST_ELEMENT (pipeline), GST_STATE_PAUSED);
2005-10-10 16:38:26 +00:00
fail_unless (ret == GST_STATE_CHANGE_ASYNC);
ret =
gst_element_get_state (GST_ELEMENT (pipeline), &current, &pending,
GST_CLOCK_TIME_NONE);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
fail_unless (current == GST_STATE_PAUSED);
fail_unless (pending == GST_STATE_VOID_PENDING);
/* wait for async thread to settle down */
GST_DEBUG ("waiting for refcount");
while (GST_OBJECT_REFCOUNT_VALUE (pipeline) > 4)
THREAD_SWITCH ();
GST_DEBUG ("refcount <= 4 now");
/* each object is referenced by a message;
* base_src is blocked in the push and has an extra refcount.
* base_sink_chain has taken a refcount on the sink, and is blocked on
* preroll
* The stream-status messages holds 2 more refs to the element */
ASSERT_OBJECT_REFCOUNT (src, "src", 4);
/* refcount can be 4 if the bin is still processing the async_done message of
* the sink. */
ASSERT_OBJECT_REFCOUNT_BETWEEN (sink, "sink", 2, 3);
/* 3 or 4 is valid, because the pipeline might still be posting
* its state_change message */
ASSERT_OBJECT_REFCOUNT_BETWEEN (pipeline, "pipeline", 3, 4);
pop_messages (bus, 3);
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
pop_async_done (bus);
fail_if ((gst_bus_pop (bus)) != NULL);
ASSERT_OBJECT_REFCOUNT (bus, "bus", 2);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
/* change state to PLAYING, spawning three messages */
GST_DEBUG ("setting pipeline to PLAYING");
ret = gst_element_set_state (GST_ELEMENT (pipeline), GST_STATE_PLAYING);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
ret =
gst_element_get_state (GST_ELEMENT (pipeline), &current, &pending,
GST_CLOCK_TIME_NONE);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
fail_unless (current == GST_STATE_PLAYING);
fail_unless (pending == GST_STATE_VOID_PENDING);
/* each object is referenced by one message
* src might have an extra reference if it's still pushing
* sink might have an extra reference if it's still blocked on preroll
* pipeline posted a new-clock message too. */
ASSERT_OBJECT_REFCOUNT_BETWEEN (src, "src", 2, 3);
ASSERT_OBJECT_REFCOUNT_BETWEEN (sink, "sink", 2, 3);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 3);
pop_messages (bus, 3);
fail_if ((gst_bus_pop (bus)) != NULL);
ASSERT_OBJECT_REFCOUNT (bus, "bus", 2);
/* src might have an extra reference if it's still pushing */
ASSERT_OBJECT_REFCOUNT_BETWEEN (src, "src", 1, 2);
/* sink might have an extra reference if it's still blocked on preroll */
ASSERT_OBJECT_REFCOUNT_BETWEEN (sink, "sink", 1, 2);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
/* go back to READY, spawning six messages */
GST_DEBUG ("setting pipeline to READY");
ret = gst_element_set_state (GST_ELEMENT (pipeline), GST_STATE_READY);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
/* each object is referenced by two messages, the source also has the
* stream-status message referencing it */
ASSERT_OBJECT_REFCOUNT (src, "src", 4);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 3);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 3);
pop_messages (bus, 6);
fail_if ((gst_bus_pop (bus)) != NULL);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
/* setting pipeline to NULL flushes the bus automatically */
ret = gst_element_set_state (GST_ELEMENT (pipeline), GST_STATE_NULL);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
/* clean up */
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
GST_START_TEST (test_watch_for_state_change)
{
GstElement *src, *sink, *bin;
GstBus *bus;
GstStateChangeReturn ret;
bin = gst_element_factory_make ("bin", NULL);
fail_unless (bin != NULL, "Could not create bin");
bus = g_object_new (gst_bus_get_type (), NULL);
gst_element_set_bus (GST_ELEMENT_CAST (bin), bus);
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
sink = gst_element_factory_make ("fakesink", NULL);
fail_if (sink == NULL, "Could not create fakesink");
gst_bin_add (GST_BIN (bin), sink);
gst_bin_add (GST_BIN (bin), src);
fail_unless (gst_element_link (src, sink), "could not link src and sink");
2005-10-10 16:38:26 +00:00
/* change state, spawning two times three messages */
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_PAUSED);
fail_unless (ret == GST_STATE_CHANGE_ASYNC);
ret =
gst_element_get_state (GST_ELEMENT (bin), NULL, NULL,
GST_CLOCK_TIME_NONE);
2005-10-10 16:38:26 +00:00
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
2005-10-10 16:38:26 +00:00
pop_messages (bus, 6);
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
pop_async_done (bus);
fail_unless (gst_bus_have_pending (bus) == FALSE,
"Unexpected messages on bus");
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_PLAYING);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
pop_messages (bus, 3);
/* this one might return either SUCCESS or ASYNC, likely SUCCESS */
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_PAUSED);
gst_element_get_state (GST_ELEMENT (bin), NULL, NULL, GST_CLOCK_TIME_NONE);
pop_messages (bus, 3);
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
if (ret == GST_STATE_CHANGE_ASYNC)
pop_async_done (bus);
fail_unless (gst_bus_have_pending (bus) == FALSE,
"Unexpected messages on bus");
/* setting bin to NULL flushes the bus automatically */
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_NULL);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
/* clean up */
gst_object_unref (bus);
gst_object_unref (bin);
}
GST_END_TEST;
GST_START_TEST (test_state_change_error_message)
{
GstElement *src, *sink, *bin;
GstBus *bus;
GstStateChangeReturn ret;
bin = gst_element_factory_make ("bin", NULL);
fail_unless (bin != NULL, "Could not create bin");
bus = g_object_new (gst_bus_get_type (), NULL);
gst_element_set_bus (GST_ELEMENT_CAST (bin), bus);
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
sink = gst_element_factory_make ("fakesink", NULL);
fail_if (sink == NULL, "Could not create fakesink");
/* add but don't link elements */
gst_bin_add (GST_BIN (bin), sink);
gst_bin_add (GST_BIN (bin), src);
/* change state, this should succeed */
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_PAUSED);
fail_unless (ret == GST_STATE_CHANGE_ASYNC);
/* now wait, the streaming thread will error because the source is not
* linked. */
ret = gst_element_get_state (GST_ELEMENT (bin), NULL, NULL,
GST_CLOCK_TIME_NONE);
fail_unless (ret == GST_STATE_CHANGE_FAILURE);
gst_bus_set_flushing (bus, TRUE);
/* setting bin to NULL flushes the bus automatically */
ret = gst_element_set_state (GST_ELEMENT (bin), GST_STATE_NULL);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS);
/* clean up */
gst_object_unref (bus);
gst_object_unref (bin);
}
GST_END_TEST;
/* adding an element with linked pads to a bin unlinks the
* pads */
GST_START_TEST (test_add_linked)
{
GstElement *src, *sink;
GstPad *srcpad, *sinkpad;
GstElement *pipeline;
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
sink = gst_element_factory_make ("fakesink", NULL);
fail_if (sink == NULL, "Could not create fakesink");
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
sinkpad = gst_element_get_static_pad (sink, "sink");
fail_unless (sinkpad != NULL);
fail_unless (gst_pad_link (srcpad, sinkpad) == GST_PAD_LINK_OK);
/* pads are linked now */
fail_unless (gst_pad_is_linked (srcpad));
fail_unless (gst_pad_is_linked (sinkpad));
/* adding element to bin voids hierarchy so pads are unlinked */
gst_bin_add (GST_BIN (pipeline), src);
/* check if pads really are unlinked */
fail_unless (!gst_pad_is_linked (srcpad));
fail_unless (!gst_pad_is_linked (sinkpad));
/* cannot link pads in wrong hierarchy */
fail_unless (gst_pad_link (srcpad, sinkpad) == GST_PAD_LINK_WRONG_HIERARCHY);
/* adding other element to bin as well */
gst_bin_add (GST_BIN (pipeline), sink);
/* now we can link again */
fail_unless (gst_pad_link (srcpad, sinkpad) == GST_PAD_LINK_OK);
/* check if pads really are linked */
fail_unless (gst_pad_is_linked (srcpad));
fail_unless (gst_pad_is_linked (sinkpad));
gst_object_unref (srcpad);
gst_object_unref (sinkpad);
gst_object_unref (pipeline);
}
GST_END_TEST;
/* adding ourself should fail */
GST_START_TEST (test_add_self)
{
GstElement *bin;
bin = gst_bin_new (NULL);
fail_unless (bin != NULL, "Could not create bin");
ASSERT_WARNING (gst_bin_add (GST_BIN (bin), bin));
gst_object_unref (bin);
}
GST_END_TEST;
/* g_print ("%10s: %4d => %4d\n", GST_OBJECT_NAME (msg->src), old, new); */
#define ASSERT_STATE_CHANGE_MSG(bus,element,old_state,new_state,num) \
{ \
GstMessage *msg; \
GstState old = 0, new = 0, pending = 0; \
msg = gst_bus_poll (bus, GST_MESSAGE_STATE_CHANGED, GST_SECOND); \
fail_if (msg == NULL, "No state change message within 1 second (#" \
G_STRINGIFY (num) ")"); \
gst_message_parse_state_changed (msg, &old, &new, &pending); \
fail_if (msg->src != GST_OBJECT (element), G_STRINGIFY(element) \
" should have changed state next (#" G_STRINGIFY (num) ")"); \
fail_if (old != old_state || new != new_state, "state change is not " \
G_STRINGIFY (old_state) " => " G_STRINGIFY (new_state)); \
gst_message_unref (msg); \
}
GST_START_TEST (test_children_state_change_order_flagged_sink)
{
GstElement *src, *identity, *sink, *pipeline;
GstStateChangeReturn ret;
2005-10-10 16:38:26 +00:00
GstState current, pending;
GstBus *bus;
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
bus = gst_element_get_bus (pipeline);
fail_unless (bus != NULL, "Pipeline has no bus?!");
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
g_object_set (src, "num-buffers", 5, NULL);
identity = gst_element_factory_make ("identity", NULL);
fail_if (identity == NULL, "Could not create identity");
sink = gst_element_factory_make ("fakesink", NULL);
fail_if (sink == NULL, "Could not create fakesink");
gst_bin_add_many (GST_BIN (pipeline), src, identity, sink, NULL);
fail_unless (gst_element_link (src, identity) == TRUE);
fail_unless (gst_element_link (identity, sink) == TRUE);
/* (1) Test state change with fakesink being a regular sink */
ret = gst_element_set_state (pipeline, GST_STATE_PLAYING);
2005-10-10 16:38:26 +00:00
fail_if (ret != GST_STATE_CHANGE_ASYNC,
"State change to PLAYING did not return ASYNC");
ret =
gst_element_get_state (pipeline, &current, &pending, GST_CLOCK_TIME_NONE);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to PLAYING failed");
2005-10-10 16:38:26 +00:00
fail_if (current != GST_STATE_PLAYING, "State change to PLAYING failed");
fail_if (pending != GST_STATE_VOID_PENDING, "State change to PLAYING failed");
/* NULL => READY */
ASSERT_STATE_CHANGE_MSG (bus, sink, GST_STATE_NULL, GST_STATE_READY, 101);
ASSERT_STATE_CHANGE_MSG (bus, identity, GST_STATE_NULL, GST_STATE_READY, 102);
ASSERT_STATE_CHANGE_MSG (bus, src, GST_STATE_NULL, GST_STATE_READY, 103);
ASSERT_STATE_CHANGE_MSG (bus, pipeline, GST_STATE_NULL, GST_STATE_READY, 104);
/* READY => PAUSED */
/* because of pre-rolling, sink will return ASYNC on state
* change and change state later when it has a buffer */
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
GST_DEBUG ("popping READY -> PAUSED messages");
ASSERT_STATE_CHANGE_MSG (bus, identity, GST_STATE_READY, GST_STATE_PAUSED,
105);
#if 0
/* From here on, all bets are off. Usually the source changes state next,
* but it might just as well be that the first buffer produced by the
* source reaches the sink before the source has finished its state change,
* in which case the sink will commit its new state before the source ... */
ASSERT_STATE_CHANGE_MSG (bus, src, GST_STATE_READY, GST_STATE_PAUSED, 106);
ASSERT_STATE_CHANGE_MSG (bus, sink, GST_STATE_READY, GST_STATE_PAUSED, 107);
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
#else
pop_messages (bus, 2); /* pop remaining ready => paused messages off the bus */
ASSERT_STATE_CHANGE_MSG (bus, pipeline, GST_STATE_READY, GST_STATE_PAUSED,
108);
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
pop_async_done (bus);
#endif
/* PAUSED => PLAYING */
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
GST_DEBUG ("popping PAUSED -> PLAYING messages");
ASSERT_STATE_CHANGE_MSG (bus, sink, GST_STATE_PAUSED, GST_STATE_PLAYING, 109);
ASSERT_STATE_CHANGE_MSG (bus, identity, GST_STATE_PAUSED, GST_STATE_PLAYING,
110);
ASSERT_STATE_CHANGE_MSG (bus, src, GST_STATE_PAUSED, GST_STATE_PLAYING, 111);
ASSERT_STATE_CHANGE_MSG (bus, pipeline, GST_STATE_PAUSED, GST_STATE_PLAYING,
112);
/* don't set to NULL that will set the bus flushing and kill our messages */
ret = gst_element_set_state (pipeline, GST_STATE_READY);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to READY failed");
ret = gst_element_get_state (pipeline, NULL, NULL, GST_CLOCK_TIME_NONE);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to READY failed");
/* TODO: do we need to check downwards state change order as well? */
pop_messages (bus, 4); /* pop playing => paused messages off the bus */
pop_messages (bus, 4); /* pop paused => ready messages off the bus */
while (GST_OBJECT_REFCOUNT_VALUE (pipeline) > 1)
THREAD_SWITCH ();
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
ret = gst_element_set_state (pipeline, GST_STATE_NULL);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to NULL failed");
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
GST_START_TEST (test_children_state_change_order_semi_sink)
{
GstElement *src, *identity, *sink, *pipeline;
GstStateChangeReturn ret;
GstState current, pending;
GstBus *bus;
/* (2) Now again, but check other code path where we don't have
* a proper sink correctly flagged as such, but a 'semi-sink' */
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
bus = gst_element_get_bus (pipeline);
fail_unless (bus != NULL, "Pipeline has no bus?!");
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
identity = gst_element_factory_make ("identity", NULL);
fail_if (identity == NULL, "Could not create identity");
sink = gst_element_factory_make ("fakesink", NULL);
fail_if (sink == NULL, "Could not create fakesink");
gst_bin_add_many (GST_BIN (pipeline), src, identity, sink, NULL);
fail_unless (gst_element_link (src, identity) == TRUE);
fail_unless (gst_element_link (identity, sink) == TRUE);
/* this is not very nice but should work just fine in this case. */
GST_OBJECT_FLAG_UNSET (sink, GST_ELEMENT_FLAG_SINK); /* <======== */
ret = gst_element_set_state (pipeline, GST_STATE_PLAYING);
2005-10-10 16:38:26 +00:00
fail_if (ret != GST_STATE_CHANGE_ASYNC, "State change to PLAYING not ASYNC");
ret =
gst_element_get_state (pipeline, &current, &pending, GST_CLOCK_TIME_NONE);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to PLAYING failed");
fail_if (current != GST_STATE_PLAYING, "State change to PLAYING failed");
fail_if (pending != GST_STATE_VOID_PENDING, "State change to PLAYING failed");
/* NULL => READY */
ASSERT_STATE_CHANGE_MSG (bus, sink, GST_STATE_NULL, GST_STATE_READY, 201);
ASSERT_STATE_CHANGE_MSG (bus, identity, GST_STATE_NULL, GST_STATE_READY, 202);
ASSERT_STATE_CHANGE_MSG (bus, src, GST_STATE_NULL, GST_STATE_READY, 203);
ASSERT_STATE_CHANGE_MSG (bus, pipeline, GST_STATE_NULL, GST_STATE_READY, 204);
/* READY => PAUSED */
/* because of pre-rolling, sink will return ASYNC on state
* change and change state later when it has a buffer */
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
GST_DEBUG ("popping READY -> PAUSED messages");
ASSERT_STATE_CHANGE_MSG (bus, identity, GST_STATE_READY, GST_STATE_PAUSED,
205);
#if 0
/* From here on, all bets are off. Usually the source changes state next,
* but it might just as well be that the first buffer produced by the
* source reaches the sink before the source has finished its state change,
* in which case the sink will commit its new state before the source ... */
ASSERT_STATE_CHANGE_MSG (bus, src, GST_STATE_READY, GST_STATE_PAUSED, 206);
ASSERT_STATE_CHANGE_MSG (bus, sink, GST_STATE_READY, GST_STATE_PAUSED, 207);
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
#else
pop_messages (bus, 2); /* pop remaining ready => paused messages off the bus */
ASSERT_STATE_CHANGE_MSG (bus, pipeline, GST_STATE_READY, GST_STATE_PAUSED,
208);
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
pop_async_done (bus);
/* PAUSED => PLAYING */
docs/gst/gstreamer-sections.txt: Add new element field and method. Original commit message from CVS: * docs/gst/gstreamer-sections.txt: Add new element field and method. * gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func), (gst_bin_recalc_state), (gst_bin_get_state_func), (gst_bin_element_set_state), (gst_bin_change_state_func), (gst_bin_continue_func), (bin_bus_handler), (bin_push_state_continue), (bin_handle_async_start), (bin_handle_async_done), (gst_bin_handle_message_func): Make async state changes a bit smarter by using new ASYNC_START and ASYNC_DONE messages. This reduces the number of times we run the state recalculation thread. Don't change state of element with a pending ASYNC_START message. Deprecate STATE_DIRTY messages. * gst/gstelement.c: (gst_element_init), (gst_element_send_event), (gst_element_get_state_func), (gst_element_continue_state), (gst_element_lost_state), (gst_element_set_state_func), (gst_element_change_state): * gst/gstelement.h: Keep the state that was last set by the app in a new element field. Don't allow state changes when handling an element event. Post ASYNC_START and ASYNC_DONE messages. Change lost_state so that we go to PAUSED and wait for the parent to set us to PLAYING again (so latency calculation can be performed) Export gst_element_change_state() method so that subclasses can use it. API: gst_element_change_state() API: GST_STATE_TARGET * gst/gstpipeline.c: (gst_pipeline_class_init), (reset_stream_time), (gst_pipeline_change_state), (gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time): Using the new ASYNC_START message we can reset the base_time when needed. This can then be used to implement base_time redistribution in flushing seeks so that we can remove the explicit seek handling. Perform latency query and configuration when going to PLAYING. * libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state), (gst_base_sink_query), (gst_base_sink_change_state): Post new ASYNC_START/ASYNC_DONE messages. * tests/check/generic/sinks.c: (GST_START_TEST): Fix test because the bin will not set the async element to PLAYING right away. * tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST): Make the message check a little stronger. Handle ASYNC messages. * tests/check/pipelines/cleanup.c: (GST_START_TEST): * tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST): Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
GST_DEBUG ("popping PAUSED -> PLAYING messages");
ASSERT_STATE_CHANGE_MSG (bus, sink, GST_STATE_PAUSED, GST_STATE_PLAYING, 209);
ASSERT_STATE_CHANGE_MSG (bus, identity, GST_STATE_PAUSED, GST_STATE_PLAYING,
210);
ASSERT_STATE_CHANGE_MSG (bus, src, GST_STATE_PAUSED, GST_STATE_PLAYING, 211);
ASSERT_STATE_CHANGE_MSG (bus, pipeline, GST_STATE_PAUSED, GST_STATE_PLAYING,
212);
#endif
/* don't set to NULL that will set the bus flushing and kill our messages */
ret = gst_element_set_state (pipeline, GST_STATE_READY);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to READY failed");
/* TODO: do we need to check downwards state change order as well? */
pop_messages (bus, 4); /* pop playing => paused messages off the bus */
pop_messages (bus, 4); /* pop paused => ready messages off the bus */
GST_DEBUG ("waiting for pipeline to reach refcount 1");
while (GST_OBJECT_REFCOUNT_VALUE (pipeline) > 1)
THREAD_SWITCH ();
GST_DEBUG ("checking refcount");
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
ret = gst_element_set_state (pipeline, GST_STATE_NULL);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to NULL failed");
GST_DEBUG ("checking refcount");
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (sink, "sink", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
GST_DEBUG ("cleanup");
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
GST_START_TEST (test_children_state_change_order_two_sink)
{
GstElement *src, *tee, *identity, *sink1, *sink2, *pipeline;
GstStateChangeReturn ret;
GstBus *bus;
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
bus = gst_element_get_bus (pipeline);
fail_unless (bus != NULL, "Pipeline has no bus?!");
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
tee = gst_element_factory_make ("tee", NULL);
fail_if (tee == NULL, "Could not create tee");
identity = gst_element_factory_make ("identity", NULL);
fail_if (identity == NULL, "Could not create identity");
sink1 = gst_element_factory_make ("fakesink", NULL);
fail_if (sink1 == NULL, "Could not create fakesink1");
sink2 = gst_element_factory_make ("fakesink", NULL);
fail_if (sink2 == NULL, "Could not create fakesink2");
gst_bin_add_many (GST_BIN (pipeline), src, tee, identity, sink1, sink2, NULL);
fail_unless (gst_element_link (src, tee) == TRUE);
fail_unless (gst_element_link (tee, identity) == TRUE);
fail_unless (gst_element_link (identity, sink1) == TRUE);
fail_unless (gst_element_link (tee, sink2) == TRUE);
ret = gst_element_set_state (pipeline, GST_STATE_READY);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to READY failed");
/* NULL => READY */
{
GstMessage *msg;
GstState old = 0, new = 0, pending = 0;
GstObject *first, *second;
msg = gst_bus_poll (bus, GST_MESSAGE_STATE_CHANGED, GST_SECOND);
fail_if (msg == NULL, "No state change message within 1 second (#201)");
gst_message_parse_state_changed (msg, &old, &new, &pending);
first = gst_object_ref (msg->src);
fail_if (first != GST_OBJECT (sink1) && first != GST_OBJECT (sink2),
"sink1 or sink2 should have changed state next #(202)");
gst_message_unref (msg);
msg = gst_bus_poll (bus, GST_MESSAGE_STATE_CHANGED, GST_SECOND);
fail_if (msg == NULL, "No state change message within 1 second (#201)");
gst_message_parse_state_changed (msg, &old, &new, &pending);
second = gst_object_ref (msg->src);
fail_if (second != GST_OBJECT (sink1) && second != GST_OBJECT (sink2),
"sink1 or sink2 should have changed state next #(202)");
gst_message_unref (msg);
fail_if (second == first, "got state change from same object");
gst_object_unref (first);
gst_object_unref (second);
}
ASSERT_STATE_CHANGE_MSG (bus, identity, GST_STATE_NULL, GST_STATE_READY, 203);
ASSERT_STATE_CHANGE_MSG (bus, tee, GST_STATE_NULL, GST_STATE_READY, 204);
ASSERT_STATE_CHANGE_MSG (bus, src, GST_STATE_NULL, GST_STATE_READY, 205);
ASSERT_STATE_CHANGE_MSG (bus, pipeline, GST_STATE_NULL, GST_STATE_READY, 206);
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (tee, "tee", 1);
ASSERT_OBJECT_REFCOUNT (identity, "identity", 1);
ASSERT_OBJECT_REFCOUNT (sink1, "sink1", 1);
ASSERT_OBJECT_REFCOUNT (sink2, "sink2", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
ret = gst_element_set_state (pipeline, GST_STATE_NULL);
fail_if (ret != GST_STATE_CHANGE_SUCCESS, "State change to NULL failed");
ASSERT_OBJECT_REFCOUNT (src, "src", 1);
ASSERT_OBJECT_REFCOUNT (tee, "tee", 1);
ASSERT_OBJECT_REFCOUNT (identity, "identity", 1);
ASSERT_OBJECT_REFCOUNT (sink1, "sink1", 1);
ASSERT_OBJECT_REFCOUNT (sink2, "sink2", 1);
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
GST_START_TEST (test_iterate_sorted)
{
GstElement *src, *tee, *identity, *sink1, *sink2, *pipeline, *bin;
GstIterator *it;
2011-03-17 10:52:42 +00:00
GValue elem = { 0, };
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
bin = gst_bin_new (NULL);
fail_unless (bin != NULL, "Could not create bin");
src = gst_element_factory_make ("fakesrc", NULL);
fail_if (src == NULL, "Could not create fakesrc");
tee = gst_element_factory_make ("tee", NULL);
fail_if (tee == NULL, "Could not create tee");
sink1 = gst_element_factory_make ("fakesink", NULL);
fail_if (sink1 == NULL, "Could not create fakesink1");
gst_bin_add_many (GST_BIN (bin), src, tee, sink1, NULL);
fail_unless (gst_element_link (src, tee) == TRUE);
fail_unless (gst_element_link (tee, sink1) == TRUE);
identity = gst_element_factory_make ("identity", NULL);
fail_if (identity == NULL, "Could not create identity");
sink2 = gst_element_factory_make ("fakesink", NULL);
fail_if (sink2 == NULL, "Could not create fakesink2");
gst_bin_add_many (GST_BIN (pipeline), bin, identity, sink2, NULL);
fail_unless (gst_element_link (tee, identity) == TRUE);
fail_unless (gst_element_link (identity, sink2) == TRUE);
it = gst_bin_iterate_sorted (GST_BIN (pipeline));
fail_unless (gst_iterator_next (it, &elem) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
fail_unless (g_value_get_object (&elem) == (gpointer) sink2);
g_value_reset (&elem);
fail_unless (gst_iterator_next (it, &elem) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
fail_unless (g_value_get_object (&elem) == (gpointer) identity);
g_value_reset (&elem);
fail_unless (gst_iterator_next (it, &elem) == GST_ITERATOR_OK);
2011-03-17 10:52:42 +00:00
fail_unless (g_value_get_object (&elem) == (gpointer) bin);
g_value_reset (&elem);
2011-03-17 10:52:42 +00:00
g_value_unset (&elem);
gst_iterator_free (it);
2011-03-17 10:52:42 +00:00
ASSERT_OBJECT_REFCOUNT (pipeline, "pipeline", 1);
gst_object_unref (pipeline);
}
GST_END_TEST;
static void
test_link_structure_change_state_changed_sync_cb (GstBus * bus,
GstMessage * message, gpointer data)
{
GstPipeline *pipeline = GST_PIPELINE (data);
GstElement *src, *identity, *sink;
GstState old, snew, pending;
sink = gst_bin_get_by_name (GST_BIN (pipeline), "sink");
fail_unless (sink != NULL, "Could not get sink");
gst_message_parse_state_changed (message, &old, &snew, &pending);
if (message->src != GST_OBJECT (sink) || snew != GST_STATE_READY) {
gst_object_unref (sink);
return;
}
src = gst_bin_get_by_name (GST_BIN (pipeline), "src");
fail_unless (src != NULL, "Could not get src");
identity = gst_bin_get_by_name (GST_BIN (pipeline), "identity");
fail_unless (identity != NULL, "Could not get identity");
/* link src to identity, the pipeline should detect the new link and
* resync the state change */
fail_unless (gst_element_link (src, identity) == TRUE);
gst_object_unref (src);
gst_object_unref (identity);
gst_object_unref (sink);
}
GST_START_TEST (test_link_structure_change)
{
GstElement *src, *identity, *sink, *pipeline;
GstBus *bus;
GstState state;
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
bus = gst_pipeline_get_bus (GST_PIPELINE (pipeline));
fail_unless (bus != NULL, "Could not get bus");
/* use the sync signal handler to link elements while the pipeline is still
* doing the state change */
gst_bus_set_sync_handler (bus, gst_bus_sync_signal_handler, pipeline, NULL);
g_object_connect (bus, "signal::sync-message::state-changed",
G_CALLBACK (test_link_structure_change_state_changed_sync_cb), pipeline,
NULL);
src = gst_element_factory_make ("fakesrc", "src");
fail_if (src == NULL, "Could not create fakesrc");
identity = gst_element_factory_make ("identity", "identity");
fail_if (identity == NULL, "Could not create identity");
sink = gst_element_factory_make ("fakesink", "sink");
fail_if (sink == NULL, "Could not create fakesink1");
gst_bin_add_many (GST_BIN (pipeline), src, identity, sink, NULL);
gst_element_set_state (pipeline, GST_STATE_READY);
gst_element_get_state (pipeline, NULL, NULL, GST_CLOCK_TIME_NONE);
/* the state change will be done on src only if the pipeline correctly resyncs
* after that fakesrc has been linked to identity */
gst_element_get_state (src, &state, NULL, 0);
fail_unless_equals_int (state, GST_STATE_READY);
/* clean up */
gst_element_set_state (pipeline, GST_STATE_NULL);
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
static GstBusSyncReply
sync_handler_remove_sink (GstBus * bus, GstMessage * message, gpointer data)
{
if (GST_MESSAGE_TYPE (message) == GST_MESSAGE_ERROR) {
GstElement *child;
child = gst_bin_get_by_name (GST_BIN (data), "fakesink");
fail_unless (child != NULL, "Could not find fakesink");
gst_bin_remove (GST_BIN (data), child);
gst_object_unref (child);
}
return GST_BUS_PASS;
}
GST_START_TEST (test_state_failure_remove)
{
GstElement *src, *sink, *pipeline;
GstBus *bus;
GstStateChangeReturn ret;
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
src = gst_element_factory_make ("fakesrc", "fakesrc");
fail_unless (src != NULL, "Could not create fakesrc");
sink = gst_element_factory_make ("fakesink", "fakesink");
fail_unless (sink != NULL, "Could not create fakesink");
g_object_set (sink, "state-error", 1, NULL);
gst_bin_add (GST_BIN (pipeline), src);
gst_bin_add (GST_BIN (pipeline), sink);
gst_element_link (src, sink);
bus = gst_pipeline_get_bus (GST_PIPELINE (pipeline));
fail_unless (bus != NULL, "Could not get bus");
gst_bus_set_sync_handler (bus, sync_handler_remove_sink, pipeline, NULL);
ret = gst_element_set_state (pipeline, GST_STATE_READY);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS,
"did not get state change success");
gst_element_set_state (pipeline, GST_STATE_NULL);
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
GST_START_TEST (test_many_bins)
{
GstStateChangeReturn ret;
GstElement *src, *sink, *pipeline, *last_bin = NULL;
gint i;
#define NUM_BINS 2000
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
src = gst_element_factory_make ("fakesrc", "fakesrc");
fail_unless (src != NULL, "Could not create fakesrc");
g_object_set (src, "num-buffers", 3, NULL);
sink = gst_element_factory_make ("fakesink", "fakesink");
fail_unless (sink != NULL, "Could not create fakesink");
gst_bin_add (GST_BIN (pipeline), src);
gst_bin_add (GST_BIN (pipeline), sink);
for (i = 0; i < NUM_BINS; ++i) {
GstElement *bin, *identity;
GstPad *srcpad, *sinkpad;
bin = gst_bin_new (NULL);
fail_unless (bin != NULL, "Could not create bin %d", i);
identity = gst_element_factory_make ("identity", "identity");
fail_unless (identity != NULL, "Could not create identity %d", i);
g_object_set (identity, "silent", TRUE, NULL);
gst_bin_add (GST_BIN (bin), identity);
sinkpad = gst_element_get_static_pad (identity, "sink");
srcpad = gst_element_get_static_pad (identity, "src");
gst_element_add_pad (bin, gst_ghost_pad_new ("sink", sinkpad));
gst_element_add_pad (bin, gst_ghost_pad_new ("src", srcpad));
gst_object_unref (sinkpad);
gst_object_unref (srcpad);
gst_bin_add (GST_BIN (pipeline), bin);
if (last_bin == NULL) {
srcpad = gst_element_get_static_pad (src, "src");
} else {
srcpad = gst_element_get_static_pad (last_bin, "src");
}
sinkpad = gst_element_get_static_pad (bin, "sink");
gst_pad_link_full (srcpad, sinkpad, GST_PAD_LINK_CHECK_NOTHING);
gst_object_unref (sinkpad);
gst_object_unref (srcpad);
last_bin = bin;
/* insert some queues to limit the number of function calls in a row */
if ((i % 100) == 0) {
GstElement *q = gst_element_factory_make ("queue", NULL);
GST_LOG ("bin #%d, inserting queue", i);
gst_bin_add (GST_BIN (pipeline), q);
fail_unless (gst_element_link (last_bin, q));
last_bin = q;
}
}
fail_unless (gst_element_link (last_bin, sink));
ret = gst_element_set_state (pipeline, GST_STATE_PLAYING);
fail_unless_equals_int (ret, GST_STATE_CHANGE_ASYNC);
for (i = 0; i < 15; ++i) {
GST_INFO ("waiting for preroll ...");
ret = gst_element_get_state (pipeline, NULL, NULL, GST_SECOND);
if (ret != GST_STATE_CHANGE_ASYNC)
break;
}
fail_unless_equals_int (ret, GST_STATE_CHANGE_SUCCESS);
gst_element_set_state (pipeline, GST_STATE_NULL);
gst_object_unref (pipeline);
}
GST_END_TEST;
2012-05-21 07:14:39 +00:00
static GstPadProbeReturn
fakesrc_pad_blocked_cb (GstPad * pad, GstPadProbeInfo * info, void *arg)
{
GstPipeline *pipeline = (GstPipeline *) arg;
GstElement *src, *sink;
src = gst_bin_get_by_name (GST_BIN (pipeline), "fakesrc");
fail_unless (src != NULL, "Could not get fakesrc");
sink = gst_element_factory_make ("fakesink", "fakesink");
fail_unless (sink != NULL, "Could not create fakesink");
g_object_set (sink, "state-error", 1, NULL);
gst_bin_add (GST_BIN (pipeline), sink);
gst_element_link (src, sink);
gst_element_sync_state_with_parent (sink);
gst_object_unref (src);
2012-05-21 07:14:39 +00:00
return GST_PAD_PROBE_REMOVE;
}
GST_START_TEST (test_state_failure_unref)
{
GstElement *src, *pipeline;
GstPad *srcpad;
GstBus *bus;
GstStateChangeReturn ret;
GstMessage *msg;
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
src = gst_element_factory_make ("fakesrc", "fakesrc");
fail_unless (src != NULL, "Could not create fakesrc");
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL, "Could not get fakesrc srcpad");
2012-05-21 07:14:39 +00:00
gst_pad_add_probe (srcpad, GST_PAD_PROBE_TYPE_BLOCK_DOWNSTREAM,
fakesrc_pad_blocked_cb, pipeline, NULL);
gst_object_unref (srcpad);
gst_bin_add (GST_BIN (pipeline), src);
bus = gst_pipeline_get_bus (GST_PIPELINE (pipeline));
fail_unless (bus != NULL, "Could not get bus");
gst_element_set_state (pipeline, GST_STATE_PLAYING);
/* Wait for an error message from our fakesink (added from the
pad block callback). */
msg = gst_bus_poll (bus, GST_MESSAGE_ERROR, GST_SECOND);
fail_if (msg == NULL, "No error message within 1 second");
gst_message_unref (msg);
/* Check that after this failure, we can still stop, and then unref, the
pipeline. This should always be possible. */
ret = gst_element_set_state (pipeline, GST_STATE_NULL);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS, "downward state change failed");
gst_object_unref (bus);
gst_object_unref (pipeline);
}
GST_END_TEST;
static void
on_sync_bus_error (GstBus * bus, GstMessage * msg)
{
fail_if (msg != NULL);
}
GST_START_TEST (test_state_change_skip)
{
GstElement *sink, *pipeline;
GstStateChangeReturn ret;
GstBus *bus;
pipeline = gst_pipeline_new (NULL);
fail_unless (pipeline != NULL, "Could not create pipeline");
bus = gst_pipeline_get_bus (GST_PIPELINE (pipeline));
fail_unless (bus != NULL, "Could not get bus");
/* no errors */
gst_bus_enable_sync_message_emission (bus);
g_signal_connect (bus, "sync-message::error", (GCallback) on_sync_bus_error,
NULL);
sink = gst_element_factory_make ("fakesink", "fakesink");
fail_unless (sink != NULL, "Could not create fakesink");
gst_element_set_state (sink, GST_STATE_PAUSED);
g_object_set (sink, "state-error", 5, NULL);
gst_bin_add (GST_BIN (pipeline), sink);
gst_element_set_state (pipeline, GST_STATE_PLAYING);
g_object_set (sink, "state-error", 0, NULL);
/* Check that after this failure, we can still stop, and then unref, the
pipeline. This should always be possible. */
ret = gst_element_set_state (pipeline, GST_STATE_NULL);
fail_unless (ret == GST_STATE_CHANGE_SUCCESS, "downward state change failed");
gst_object_unref (pipeline);
gst_object_unref (bus);
}
GST_END_TEST;
GST_START_TEST (test_duration_is_max)
{
GstElement *bin, *src[3], *sink[3];
GstStateChangeReturn state_res;
GstFormat format = GST_FORMAT_BYTES;
gboolean res;
gint64 duration;
GST_INFO ("preparing test");
/* build pipeline */
bin = gst_pipeline_new ("pipeline");
/* 3 sources, an adder and a fakesink */
src[0] = gst_element_factory_make ("fakesrc", NULL);
src[1] = gst_element_factory_make ("fakesrc", NULL);
src[2] = gst_element_factory_make ("fakesrc", NULL);
sink[0] = gst_element_factory_make ("fakesink", NULL);
sink[1] = gst_element_factory_make ("fakesink", NULL);
sink[2] = gst_element_factory_make ("fakesink", NULL);
gst_bin_add_many (GST_BIN (bin), src[0], src[1], src[2], sink[0], sink[1],
sink[2], NULL);
gst_element_link (src[0], sink[0]);
gst_element_link (src[1], sink[1]);
gst_element_link (src[2], sink[2]);
/* irks, duration is reset on basesrc */
state_res = gst_element_set_state (bin, GST_STATE_PAUSED);
fail_unless (state_res != GST_STATE_CHANGE_FAILURE, NULL);
/* set durations on src */
GST_BASE_SRC (src[0])->segment.duration = 1000;
GST_BASE_SRC (src[1])->segment.duration = 3000;
GST_BASE_SRC (src[2])->segment.duration = 2000;
/* set to playing */
state_res = gst_element_set_state (bin, GST_STATE_PLAYING);
fail_unless (state_res != GST_STATE_CHANGE_FAILURE, NULL);
/* wait for completion */
state_res =
gst_element_get_state (GST_ELEMENT (bin), NULL, NULL,
GST_CLOCK_TIME_NONE);
fail_unless (state_res != GST_STATE_CHANGE_FAILURE, NULL);
res = gst_element_query_duration (GST_ELEMENT (bin), format, &duration);
fail_unless (res, NULL);
ck_assert_int_eq (duration, 3000);
gst_element_set_state (bin, GST_STATE_NULL);
gst_object_unref (bin);
}
GST_END_TEST;
GST_START_TEST (test_duration_unknown_overrides)
{
GstElement *bin, *src[3], *sink[3];
GstStateChangeReturn state_res;
GstFormat format = GST_FORMAT_BYTES;
gboolean res;
gint64 duration;
GST_INFO ("preparing test");
/* build pipeline */
bin = gst_pipeline_new ("pipeline");
/* 3 sources, an adder and a fakesink */
src[0] = gst_element_factory_make ("fakesrc", NULL);
src[1] = gst_element_factory_make ("fakesrc", NULL);
src[2] = gst_element_factory_make ("fakesrc", NULL);
sink[0] = gst_element_factory_make ("fakesink", NULL);
sink[1] = gst_element_factory_make ("fakesink", NULL);
sink[2] = gst_element_factory_make ("fakesink", NULL);
gst_bin_add_many (GST_BIN (bin), src[0], src[1], src[2], sink[0], sink[1],
sink[2], NULL);
gst_element_link (src[0], sink[0]);
gst_element_link (src[1], sink[1]);
gst_element_link (src[2], sink[2]);
/* irks, duration is reset on basesrc */
state_res = gst_element_set_state (bin, GST_STATE_PAUSED);
fail_unless (state_res != GST_STATE_CHANGE_FAILURE, NULL);
/* set durations on src */
GST_BASE_SRC (src[0])->segment.duration = GST_CLOCK_TIME_NONE;
GST_BASE_SRC (src[1])->segment.duration = 3000;
GST_BASE_SRC (src[2])->segment.duration = 2000;
/* set to playing */
state_res = gst_element_set_state (bin, GST_STATE_PLAYING);
fail_unless (state_res != GST_STATE_CHANGE_FAILURE, NULL);
/* wait for completion */
state_res =
gst_element_get_state (GST_ELEMENT (bin), NULL, NULL,
GST_CLOCK_TIME_NONE);
fail_unless (state_res != GST_STATE_CHANGE_FAILURE, NULL);
res = gst_element_query_duration (GST_ELEMENT (bin), format, &duration);
fail_unless (res, NULL);
ck_assert_int_eq (duration, GST_CLOCK_TIME_NONE);
gst_element_set_state (bin, GST_STATE_NULL);
gst_object_unref (bin);
}
GST_END_TEST;
And correct even more valid sparse warnings. Original commit message from CVS: * gst/gstelementfactory.h: * tests/check/elements/fakesink.c: * tests/check/elements/fakesrc.c: (setup_fakesrc): * tests/check/elements/fdsrc.c: (setup_fdsrc): * tests/check/elements/filesink.c: (setup_filesink): * tests/check/elements/filesrc.c: (setup_filesrc): * tests/check/elements/identity.c: (setup_identity): * tests/check/elements/tee.c: * tests/check/generic/sinks.c: * tests/check/generic/states.c: (setup), (teardown): * tests/check/gst/gst.c: * tests/check/gst/gstabi.c: * tests/check/gst/gstbin.c: * tests/check/gst/gstbus.c: (pull_messages): * tests/check/gst/gstcaps.c: * tests/check/gst/gstelement.c: * tests/check/gst/gstevent.c: * tests/check/gst/gstghostpad.c: * tests/check/gst/gstiterator.c: * tests/check/gst/gstmessage.c: * tests/check/gst/gstminiobject.c: (my_foo_init): * tests/check/gst/gstobject.c: (thread_name_object), (gst_object_suite): * tests/check/gst/gstpad.c: * tests/check/gst/gstplugin.c: * tests/check/gst/gstpoll.c: * tests/check/gst/gstquery.c: * tests/check/gst/gstsegment.c: * tests/check/gst/gststructure.c: * tests/check/gst/gstsystemclock.c: * tests/check/gst/gsttask.c: * tests/check/gst/gstutils.c: * tests/check/gst/gstvalue.c: * tests/check/gst/struct_hppa.h: * tests/check/gst/struct_i386.h: * tests/check/gst/struct_ppc32.h: * tests/check/gst/struct_ppc64.h: * tests/check/gst/struct_x86_64.h: * tests/check/libs/adapter.c: (create_and_fill_adapter): * tests/check/libs/basesrc.c: * tests/check/libs/controller.c: (GST_START_TEST): * tests/check/libs/gdp.c: * tests/check/libs/gstnetclientclock.c: * tests/check/libs/gstnettimeprovider.c: * tests/check/libs/libsabi.c: * tests/check/libs/struct_hppa.h: * tests/check/libs/struct_i386.h: * tests/check/libs/struct_ppc32.h: * tests/check/libs/struct_ppc64.h: * tests/check/libs/struct_x86_64.h: * tests/check/pipelines/cleanup.c: * tests/check/pipelines/simple-launch-lines.c: * tests/check/pipelines/stress.c: And correct even more valid sparse warnings. * win32/common/libgstreamer.def: Add gst_poll_fd_init to the list of symbols.
2008-02-29 13:59:24 +00:00
static Suite *
gst_bin_suite (void)
{
Suite *s = suite_create ("GstBin");
TCase *tc_chain = tcase_create ("bin tests");
tcase_set_timeout (tc_chain, 0);
suite_add_tcase (s, tc_chain);
tcase_add_test (tc_chain, test_interface);
tcase_add_test (tc_chain, test_eos);
tcase_add_test (tc_chain, test_stream_start);
tcase_add_test (tc_chain, test_children_state_change_order_flagged_sink);
tcase_add_test (tc_chain, test_children_state_change_order_semi_sink);
tcase_add_test (tc_chain, test_children_state_change_order_two_sink);
tcase_add_test (tc_chain, test_message_state_changed);
tcase_add_test (tc_chain, test_message_state_changed_child);
tcase_add_test (tc_chain, test_message_state_changed_children);
tcase_add_test (tc_chain, test_watch_for_state_change);
tcase_add_test (tc_chain, test_state_change_error_message);
tcase_add_test (tc_chain, test_add_linked);
tcase_add_test (tc_chain, test_add_self);
tcase_add_test (tc_chain, test_iterate_sorted);
tcase_add_test (tc_chain, test_link_structure_change);
tcase_add_test (tc_chain, test_state_failure_remove);
tcase_add_test (tc_chain, test_state_failure_unref);
tcase_add_test (tc_chain, test_state_change_skip);
tcase_add_test (tc_chain, test_duration_is_max);
tcase_add_test (tc_chain, test_duration_unknown_overrides);
/* fails on OSX build bot for some reason, and is a bit silly anyway */
if (0)
tcase_add_test (tc_chain, test_many_bins);
return s;
}
tests/check/: use the new macro Original commit message from CVS: * tests/check/elements/fakesink.c: * tests/check/elements/fakesrc.c: * tests/check/elements/fdsrc.c: * tests/check/elements/identity.c: * tests/check/generic/sinks.c: (gst_sinks_suite): * tests/check/generic/states.c: * tests/check/gst/gst.c: * tests/check/gst/gstabi.c: * tests/check/gst/gstbin.c: * tests/check/gst/gstbuffer.c: (gst_buffer_suite): * tests/check/gst/gstbus.c: (gst_bus_suite): * tests/check/gst/gstcaps.c: (GST_START_TEST): * tests/check/gst/gstelement.c: * tests/check/gst/gstevent.c: (gst_event_suite): * tests/check/gst/gstghostpad.c: * tests/check/gst/gstiterator.c: (gst_iterator_suite): * tests/check/gst/gstmessage.c: (gst_message_suite): * tests/check/gst/gstminiobject.c: * tests/check/gst/gstobject.c: * tests/check/gst/gstpad.c: * tests/check/gst/gstpipeline.c: * tests/check/gst/gstplugin.c: * tests/check/gst/gstquery.c: (gst_query_suite): * tests/check/gst/gstsegment.c: (gst_segment_suite): * tests/check/gst/gststructure.c: * tests/check/gst/gstsystemclock.c: * tests/check/gst/gsttag.c: * tests/check/gst/gsttask.c: (gst_task_suite): * tests/check/gst/gstutils.c: * tests/check/gst/gstvalue.c: * tests/check/libs/adapter.c: * tests/check/libs/basesrc.c: * tests/check/libs/collectpads.c: * tests/check/libs/controller.c: * tests/check/libs/gdp.c: (gst_dp_suite): * tests/check/libs/gstnetclientclock.c: * tests/check/libs/gstnettimeprovider.c: * tests/check/libs/libsabi.c: (libsabi_suite): * tests/check/libs/typefindhelper.c: * tests/check/pipelines/cleanup.c: * tests/check/pipelines/parse-launch.c: * tests/check/pipelines/simple-launch-lines.c: * tests/check/pipelines/stress.c: (stress_suite): use the new macro
2006-07-01 20:56:56 +00:00
GST_CHECK_MAIN (gst_bin);