docs: Regenerate and add missing gl egl/wayland/x11 files

docs/gstreamer-app/docs.md

@@ -39,7 +39,7 @@ to avoid polling.
 
 # Implements
 
-[`gst_base::BaseSinkExt`](../gst_base/trait.BaseSinkExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`gst::URIHandlerExt`](../gst/trait.URIHandlerExt.html)
+[`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`gst::URIHandlerExt`](../gst/trait.URIHandlerExt.html)
 <!-- impl AppSink::fn get_buffer_list_support -->
 Check if `self` supports buffer lists.
 
@@ -54,7 +54,7 @@ Get the configured caps on `self`.
 
 # Returns
 
-the `gst::Caps` accepted by the sink. `gst::Caps::unref` after usage.
+the `gst::Caps` accepted by the sink. `gst_caps_unref` after usage.
 <!-- impl AppSink::fn get_drop -->
 Check if `self` will drop old buffers when the maximum amount of queued
 buffers is reached.
@@ -117,7 +117,7 @@ element is set to the READY/NULL state.
 # Returns
 
 a `gst::Sample` or NULL when the appsink is stopped or EOS.
- Call `gst::Sample::unref` after usage.
+ Call `gst_sample_unref` after usage.
 <!-- impl AppSink::fn pull_sample -->
 This function blocks until a sample or EOS becomes available or the appsink
 element is set to the READY/NULL state.
@@ -134,7 +134,7 @@ If an EOS event was received before any buffers, this function returns
 # Returns
 
 a `gst::Sample` or NULL when the appsink is stopped or EOS.
- Call `gst::Sample::unref` after usage.
+ Call `gst_sample_unref` after usage.
 <!-- impl AppSink::fn set_buffer_list_support -->
 Instruct `self` to enable or disable buffer list support.
 
@@ -218,7 +218,7 @@ the maximum amount of time to wait for the preroll sample
 # Returns
 
 a `gst::Sample` or NULL when the appsink is stopped or EOS or the timeout expires.
- Call `gst::Sample::unref` after usage.
+ Call `gst_sample_unref` after usage.
 <!-- impl AppSink::fn try_pull_sample -->
 This function blocks until a sample or EOS becomes available or the appsink
 element is set to the READY/NULL state or the timeout expires.
@@ -241,7 +241,7 @@ the maximum amount of time to wait for a sample
 # Returns
 
 a `gst::Sample` or NULL when the appsink is stopped or EOS or the timeout expires.
-Call `gst::Sample::unref` after usage.
+Call `gst_sample_unref` after usage.
 <!-- impl AppSink::fn connect_eos -->
 Signal that the end-of-stream has been reached. This signal is emitted from
 the streaming thread.
@@ -433,7 +433,7 @@ occurs or the state of the appsrc has gone through READY.
 
 # Implements
 
-[`gst_base::BaseSrcExt`](../gst_base/trait.BaseSrcExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`gst::URIHandlerExt`](../gst/trait.URIHandlerExt.html)
+[`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`gst::URIHandlerExt`](../gst/trait.URIHandlerExt.html)
 <!-- impl AppSrc::fn end_of_stream -->
 Indicates to the appsrc element that the last buffer queued in the
 element is the last buffer of the stream.
@@ -447,7 +447,7 @@ Get the configured caps on `self`.
 
 # Returns
 
-the `gst::Caps` produced by the source. `gst::Caps::unref` after usage.
+the `gst::Caps` produced by the source. `gst_caps_unref` after usage.
 <!-- impl AppSrc::fn get_current_level_bytes -->
 Get the number of currently queued bytes inside `self`.
 
@@ -675,6 +675,110 @@ the offset to seek to
 # Returns
 
 `true` if the seek succeeded.
+<!-- impl AppSrc::fn get_property_block -->
+When max-bytes are queued and after the enough-data signal has been emitted,
+block any further push-buffer calls until the amount of queued bytes drops
+below the max-bytes limit.
+<!-- impl AppSrc::fn set_property_block -->
+When max-bytes are queued and after the enough-data signal has been emitted,
+block any further push-buffer calls until the amount of queued bytes drops
+below the max-bytes limit.
+<!-- impl AppSrc::fn get_property_caps -->
+The GstCaps that will negotiated downstream and will be put
+on outgoing buffers.
+<!-- impl AppSrc::fn set_property_caps -->
+The GstCaps that will negotiated downstream and will be put
+on outgoing buffers.
+<!-- impl AppSrc::fn get_property_current_level_bytes -->
+The number of currently queued bytes inside appsrc.
+<!-- impl AppSrc::fn get_property_duration -->
+The total duration in nanoseconds of the data stream. If the total duration is known, it
+is recommended to configure it with this property.
+
+Feature: `v1_10`
+
+<!-- impl AppSrc::fn set_property_duration -->
+The total duration in nanoseconds of the data stream. If the total duration is known, it
+is recommended to configure it with this property.
+
+Feature: `v1_10`
+
+<!-- impl AppSrc::fn get_property_emit_signals -->
+Make appsrc emit the "need-data", "enough-data" and "seek-data" signals.
+This option is by default enabled for backwards compatibility reasons but
+can disabled when needed because signal emission is expensive.
+<!-- impl AppSrc::fn set_property_emit_signals -->
+Make appsrc emit the "need-data", "enough-data" and "seek-data" signals.
+This option is by default enabled for backwards compatibility reasons but
+can disabled when needed because signal emission is expensive.
+<!-- impl AppSrc::fn get_property_format -->
+The format to use for segment events. When the source is producing
+timestamped buffers this property should be set to GST_FORMAT_TIME.
+<!-- impl AppSrc::fn set_property_format -->
+The format to use for segment events. When the source is producing
+timestamped buffers this property should be set to GST_FORMAT_TIME.
+<!-- impl AppSrc::fn get_property_handle_segment_change -->
+When enabled, appsrc will check GstSegment in GstSample which was
+pushed via `AppSrc::push_sample` or "push-sample" signal action.
+If a GstSegment is changed, corresponding segment event will be followed
+by next data flow.
+
+FIXME: currently only GST_FORMAT_TIME format is supported and therefore
+GstAppSrc::format should be time. However, possibly `AppSrc` can support
+other formats.
+
+Feature: `v1_18`
+
+<!-- impl AppSrc::fn set_property_handle_segment_change -->
+When enabled, appsrc will check GstSegment in GstSample which was
+pushed via `AppSrc::push_sample` or "push-sample" signal action.
+If a GstSegment is changed, corresponding segment event will be followed
+by next data flow.
+
+FIXME: currently only GST_FORMAT_TIME format is supported and therefore
+GstAppSrc::format should be time. However, possibly `AppSrc` can support
+other formats.
+
+Feature: `v1_18`
+
+<!-- impl AppSrc::fn get_property_is_live -->
+Instruct the source to behave like a live source. This includes that it
+will only push out buffers in the PLAYING state.
+<!-- impl AppSrc::fn set_property_is_live -->
+Instruct the source to behave like a live source. This includes that it
+will only push out buffers in the PLAYING state.
+<!-- impl AppSrc::fn get_property_max_bytes -->
+The maximum amount of bytes that can be queued internally.
+After the maximum amount of bytes are queued, appsrc will emit the
+"enough-data" signal.
+<!-- impl AppSrc::fn set_property_max_bytes -->
+The maximum amount of bytes that can be queued internally.
+After the maximum amount of bytes are queued, appsrc will emit the
+"enough-data" signal.
+<!-- impl AppSrc::fn get_property_min_latency -->
+The minimum latency of the source. A value of -1 will use the default
+latency calculations of `gst_base::BaseSrc`.
+<!-- impl AppSrc::fn set_property_min_latency -->
+The minimum latency of the source. A value of -1 will use the default
+latency calculations of `gst_base::BaseSrc`.
+<!-- impl AppSrc::fn get_property_min_percent -->
+Make appsrc emit the "need-data" signal when the amount of bytes in the
+queue drops below this percentage of max-bytes.
+<!-- impl AppSrc::fn set_property_min_percent -->
+Make appsrc emit the "need-data" signal when the amount of bytes in the
+queue drops below this percentage of max-bytes.
+<!-- impl AppSrc::fn get_property_size -->
+The total size in bytes of the data stream. If the total size is known, it
+is recommended to configure it with this property.
+<!-- impl AppSrc::fn set_property_size -->
+The total size in bytes of the data stream. If the total size is known, it
+is recommended to configure it with this property.
+<!-- impl AppSrc::fn get_property_stream_type -->
+The type of stream that this source is producing. For seekable streams the
+application should connect to the seek-data signal.
+<!-- impl AppSrc::fn set_property_stream_type -->
+The type of stream that this source is producing. For seekable streams the
+application should connect to the seek-data signal.
 <!-- enum AppStreamType -->
 The stream type.
 <!-- enum AppStreamType::variant Stream -->

docs/gstreamer-audio/docs.md

@@ -338,6 +338,8 @@ Things that subclass need to take care of:
  PLC, it should also accept NULL data in `handle_frame` and provide for
  data for indicated duration.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`AudioDecoderExt`](trait.AudioDecoderExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`AudioDecoderExtManual`](prelude/trait.AudioDecoderExtManual.html)
@@ -631,6 +633,16 @@ Maximum number of tolerated consecutive decode errors. See
 
 Feature: `v1_18`
 
+<!-- enum AudioDitherMethod -->
+Set of available dithering methods.
+<!-- enum AudioDitherMethod::variant None -->
+No dithering
+<!-- enum AudioDitherMethod::variant Rpdf -->
+Rectangular dithering
+<!-- enum AudioDitherMethod::variant Tpdf -->
+Triangular dithering (default)
+<!-- enum AudioDitherMethod::variant TpdfHf -->
+High frequency triangular dithering
 <!-- struct AudioEncoder -->
 This base class is for audio encoders turning raw audio samples into
 encoded audio data.
@@ -725,6 +737,8 @@ Things that subclass need to take care of:
  * Accept data in `handle_frame` and provide encoded results to
  `AudioEncoder::finish_frame`.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`AudioEncoderExt`](trait.AudioEncoderExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`AudioEncoderExtManual`](prelude/trait.AudioEncoderExtManual.html)
@@ -1176,6 +1190,18 @@ Layout of the audio samples for the different channels.
 interleaved audio
 <!-- enum AudioLayout::variant NonInterleaved -->
 non-interleaved audio
+<!-- enum AudioNoiseShapingMethod -->
+Set of available noise shaping methods
+<!-- enum AudioNoiseShapingMethod::variant None -->
+No noise shaping (default)
+<!-- enum AudioNoiseShapingMethod::variant ErrorFeedback -->
+Error feedback
+<!-- enum AudioNoiseShapingMethod::variant Simple -->
+Simple 2-pole noise shaping
+<!-- enum AudioNoiseShapingMethod::variant Medium -->
+Medium 5-pole noise shaping
+<!-- enum AudioNoiseShapingMethod::variant High -->
+High 8-pole noise shaping
 <!-- struct AudioPackFlags -->
 The different flags that can be used when packing and unpacking.
 <!-- struct AudioPackFlags::const NONE -->
@@ -1186,6 +1212,23 @@ When the source has a smaller depth
  to 0. This is likely slightly faster but less accurate. When this flag
  is not specified, the most significant bits of the source are duplicated
  in the least significant bits of the destination.
+<!-- enum AudioResamplerMethod -->
+Different subsampling and upsampling methods
+<!-- enum AudioResamplerMethod::variant Nearest -->
+Duplicates the samples when
+ upsampling and drops when downsampling
+<!-- enum AudioResamplerMethod::variant Linear -->
+Uses linear interpolation to reconstruct
+ missing samples and averaging to downsample
+<!-- enum AudioResamplerMethod::variant Cubic -->
+Uses cubic interpolation
+<!-- enum AudioResamplerMethod::variant BlackmanNuttall -->
+Uses Blackman-Nuttall windowed sinc interpolation
+<!-- enum AudioResamplerMethod::variant Kaiser -->
+Uses Kaiser windowed sinc interpolation
+
+Feature: `v1_10`
+
 <!-- enum AudioRingBufferFormatType -->
 The format of the samples in the ringbuffer.
 <!-- enum AudioRingBufferFormatType::variant Raw -->

docs/gstreamer-base/docs.md

@@ -97,7 +97,7 @@ of `Adapter` is inside one pad's chain function, in which case access is
 serialized via the pad's STREAM_LOCK.
 
 Note that `Adapter::push` takes ownership of the buffer passed. Use
-`gst::Buffer::ref` before pushing it into the adapter if you still want to
+`gst_buffer_ref` before pushing it into the adapter if you still want to
 access the buffer later. The adapter will never modify the data in the
 buffer pushed in it.
 
@@ -192,7 +192,7 @@ Returns a `gst::Buffer` containing the first `nbytes` of the `self`, but
 does not flush them from the adapter. See `Adapter::take_buffer`
 for details.
 
-Caller owns a reference to the returned buffer. `gst::Buffer::unref` after
+Caller owns a reference to the returned buffer. `gst_buffer_unref` after
 usage.
 
 Free-function: gst_buffer_unref
@@ -203,13 +203,13 @@ the number of bytes to get
 
 a `gst::Buffer` containing the first
  `nbytes` of the adapter, or `None` if `nbytes` bytes are not available.
- `gst::Buffer::unref` when no longer needed.
+ `gst_buffer_unref` when no longer needed.
 <!-- impl Adapter::fn get_buffer_fast -->
 Returns a `gst::Buffer` containing the first `nbytes` of the `self`, but
 does not flush them from the adapter. See `Adapter::take_buffer_fast`
 for details.
 
-Caller owns a reference to the returned buffer. `gst::Buffer::unref` after
+Caller owns a reference to the returned buffer. `gst_buffer_unref` after
 usage.
 
 Free-function: gst_buffer_unref
@@ -220,13 +220,13 @@ the number of bytes to get
 
 a `gst::Buffer` containing the first
  `nbytes` of the adapter, or `None` if `nbytes` bytes are not available.
- `gst::Buffer::unref` when no longer needed.
+ `gst_buffer_unref` when no longer needed.
 <!-- impl Adapter::fn get_buffer_list -->
 Returns a `gst::BufferList` of buffers containing the first `nbytes` bytes of
 the `self` but does not flush them from the adapter. See
 `Adapter::take_buffer_list` for details.
 
-Caller owns the returned list. Call `gst::BufferList::unref` to free
+Caller owns the returned list. Call `gst_buffer_list_unref` to free
 the list after usage.
 ## `nbytes`
 the number of bytes to get
@@ -241,7 +241,7 @@ Returns a `glib::List` of buffers containing the first `nbytes` bytes of the
 `self`, but does not flush them from the adapter. See
 `Adapter::take_list` for details.
 
-Caller owns returned list and contained buffers. `gst::Buffer::unref` each
+Caller owns returned list and contained buffers. `gst_buffer_unref` each
 buffer in the list before freeing the list after usage.
 ## `nbytes`
 the number of bytes to get
@@ -482,7 +482,7 @@ unset.
 Since 1.6 this will also copy over all GstMeta of the input buffers except
 for meta with the `gst::MetaFlags::Pooled` flag or with the "memory" tag.
 
-Caller owns a reference to the returned buffer. `gst::Buffer::unref` after
+Caller owns a reference to the returned buffer. `gst_buffer_unref` after
 usage.
 
 Free-function: gst_buffer_unref
@@ -493,7 +493,7 @@ the number of bytes to take
 
 a `gst::Buffer` containing the first
  `nbytes` of the adapter, or `None` if `nbytes` bytes are not available.
- `gst::Buffer::unref` when no longer needed.
+ `gst_buffer_unref` when no longer needed.
 <!-- impl Adapter::fn take_buffer_fast -->
 Returns a `gst::Buffer` containing the first `nbytes` of the `self`.
 The returned bytes will be flushed from the adapter. This function
@@ -514,7 +514,7 @@ for meta with the `gst::MetaFlags::Pooled` flag or with the "memory" tag.
 This function can return buffer up to the return value of
 `Adapter::available` without making copies if possible.
 
-Caller owns a reference to the returned buffer. `gst::Buffer::unref` after
+Caller owns a reference to the returned buffer. `gst_buffer_unref` after
 usage.
 
 Free-function: gst_buffer_unref
@@ -525,14 +525,14 @@ the number of bytes to take
 
 a `gst::Buffer` containing the first
  `nbytes` of the adapter, or `None` if `nbytes` bytes are not available.
- `gst::Buffer::unref` when no longer needed.
+ `gst_buffer_unref` when no longer needed.
 <!-- impl Adapter::fn take_buffer_list -->
 Returns a `gst::BufferList` of buffers containing the first `nbytes` bytes of
 the `self`. The returned bytes will be flushed from the adapter.
 When the caller can deal with individual buffers, this function is more
 performant because no memory should be copied.
 
-Caller owns the returned list. Call `gst::BufferList::unref` to free
+Caller owns the returned list. Call `gst_buffer_list_unref` to free
 the list after usage.
 ## `nbytes`
 the number of bytes to take
@@ -548,7 +548,7 @@ Returns a `glib::List` of buffers containing the first `nbytes` bytes of the
 When the caller can deal with individual buffers, this function is more
 performant because no memory should be copied.
 
-Caller owns returned list and contained buffers. `gst::Buffer::unref` each
+Caller owns returned list and contained buffers. `gst_buffer_unref` each
 buffer in the list before freeing the list after usage.
 ## `nbytes`
 the number of bytes to take
@@ -576,16 +576,35 @@ Control is given to the subclass when all pads have data.
  * When data is queued on all pads, the aggregate vmethod is called.
 
  * One can peek at the data on any given GstAggregatorPad with the
- gst_aggregator_pad_peek_buffer () method, and remove it from the pad
+ `AggregatorPadExt::peek_buffer` method, and remove it from the pad
  with the gst_aggregator_pad_pop_buffer () method. When a buffer
  has been taken with pop_buffer (), a new buffer can be queued
  on that pad.
 
+ * When `AggregatorPadExt::peek_buffer` or `AggregatorPadExt::has_buffer`
+ are called, a reference is taken to the returned buffer, which stays
+ valid until either:
+
+ - `AggregatorPadExt::pop_buffer` is called, in which case the caller
+ is guaranteed that the buffer they receive is the same as the peeked
+ buffer.
+ - `AggregatorPadExt::drop_buffer` is called, in which case the caller
+ is guaranteed that the dropped buffer is the one that was peeked.
+ - the subclass implementation of `AggregatorClass.aggregate` returns.
+
+ Subsequent calls to `AggregatorPadExt::peek_buffer` or
+ `AggregatorPadExt::has_buffer` return / check the same buffer that was
+ returned / checked, until one of the conditions listed above is met.
+
+ Subclasses are only allowed to call these methods from the aggregate
+ thread.
+
  * If the subclass wishes to push a buffer downstream in its aggregate
  implementation, it should do so through the
- gst_aggregator_finish_buffer () method. This method will take care
+ `Aggregator::finish_buffer` method. This method will take care
  of sending and ordering mandatory events such as stream start, caps
- and segment.
+ and segment. Buffer lists can also be pushed out with
+ `Aggregator::finish_buffer_list`.
 
  * Same goes for EOS events, which should not be pushed directly by the
  subclass, it should instead return GST_FLOW_EOS in its aggregate
@@ -602,6 +621,8 @@ Control is given to the subclass when all pads have data.
 
 This class used to live in gst-plugins-bad and was moved to core.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 Feature: `v1_14`
 
 # Implements
@@ -624,6 +645,15 @@ Feature: `v1_14`
 
 ## `buffer`
 the `gst::Buffer` to push.
+<!-- trait AggregatorExt::fn finish_buffer_list -->
+This method will push the provided output buffer list downstream. If needed,
+mandatory events such as stream-start, caps, and segment events will be
+sent before pushing the buffer.
+
+Feature: `v1_18`
+
+## `bufferlist`
+the `gst::BufferList` to push.
 <!-- trait AggregatorExt::fn get_allocator -->
 Lets `Aggregator` sub-classes get the memory `allocator`
 acquired by the base class and its `params`.
@@ -671,6 +701,44 @@ Feature: `v1_18`
 # Returns
 
 `true` if the negotiation succeeded, else `false`.
+<!-- trait AggregatorExt::fn peek_next_sample -->
+Use this function to determine what input buffers will be aggregated
+to produce the next output buffer. This should only be called from
+a `Aggregator::samples-selected` handler, and can be used to precisely
+control aggregating parameters for a given set of input samples.
+
+Feature: `v1_18`
+
+
+# Returns
+
+The sample that is about to be aggregated. It may hold a `gst::Buffer`
+ or a `gst::BufferList`. The contents of its info structure is subclass-dependent,
+ and documented on a subclass basis. The buffers held by the sample are
+ not writable.
+<!-- trait AggregatorExt::fn selected_samples -->
+Subclasses should call this when they have prepared the
+buffers they will aggregate for each of their sink pads, but
+before using any of the properties of the pads that govern
+*how* aggregation should be performed, for example z-index
+for video aggregators.
+
+If `AggregatorExt::update_segment` is used by the subclass,
+it MUST be called before `Aggregator::selected_samples`.
+
+This function MUST only be called from the `AggregatorClass::aggregate`()
+function.
+
+Feature: `v1_18`
+
+## `pts`
+The presentation timestamp of the next output buffer
+## `dts`
+The decoding timestamp of the next output buffer
+## `duration`
+The duration of the next output buffer
+## `info`
+a `gst::Structure` containing additional information
 <!-- trait AggregatorExt::fn set_latency -->
 Lets `Aggregator` sub-classes tell the baseclass what their internal
 latency is. Will also post a LATENCY message on the bus so the pipeline
@@ -708,6 +776,36 @@ Subclasses should use this to update the segment on their
 source pad, instead of directly pushing new segment events
 downstream.
 
+Subclasses MUST call this before `Aggregator::selected_samples`,
+if it is used at all.
+
+Feature: `v1_18`
+
+<!-- trait AggregatorExt::fn connect_samples_selected -->
+Signals that the `Aggregator` subclass has selected the next set
+of input samples it will aggregate. Handlers may call
+`AggregatorExt::peek_next_sample` at that point.
+
+Feature: `v1_18`
+
+## `segment`
+The `gst::Segment` the next output buffer is part of
+## `pts`
+The presentation timestamp of the next output buffer
+## `dts`
+The decoding timestamp of the next output buffer
+## `duration`
+The duration of the next output buffer
+## `info`
+a `gst::Structure` containing additional information
+<!-- trait AggregatorExt::fn get_property_emit_signals -->
+Enables the emission of signals such as `Aggregator::samples-selected`
+
+Feature: `v1_18`
+
+<!-- trait AggregatorExt::fn set_property_emit_signals -->
+Enables the emission of signals such as `Aggregator::samples-selected`
+
 Feature: `v1_18`
 
 <!-- trait AggregatorExt::fn get_property_min_upstream_latency -->
@@ -953,6 +1051,8 @@ Things that subclass need to take care of:
  These rates are also used to update (estimated) duration at regular
  frame intervals.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`BaseParseExt`](trait.BaseParseExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`BaseParseExtManual`](prelude/trait.BaseParseExtManual.html)
@@ -1337,6 +1437,8 @@ The `BaseSink:async` property can be used to instruct the sink to never
 perform an ASYNC state change. This feature is mostly usable when dealing
 with non-synchronized streams or sparse streams.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`BaseSinkExt`](trait.BaseSinkExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`BaseSinkExtManual`](prelude/trait.BaseSinkExtManual.html)
@@ -1388,7 +1490,7 @@ Free-function: gst_sample_unref
 
 # Returns
 
-a `gst::Sample`. `gst::Sample::unref` after
+a `gst::Sample`. `gst_sample_unref` after
  usage. This function returns `None` when no buffer has arrived in the
  sink yet or when the sink is not in PAUSED or PLAYING.
 <!-- trait BaseSinkExt::fn get_latency -->
@@ -1859,6 +1961,8 @@ After the EOS has been sent to the element, the application should wait for
 an EOS message to be posted on the pipeline's bus. Once this EOS message is
 received, it may safely shut down the entire pipeline.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`BaseSrcExt`](trait.BaseSrcExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`BaseSrcExtManual`](prelude/trait.BaseSrcExtManual.html)
@@ -1877,8 +1981,7 @@ Unref the `allocator` after usage.
 the `gst::Allocator`
 used
 ## `params`
-the
+the `gst::AllocationParams` of `allocator`
-`gst::AllocationParams` of `allocator`
 <!-- trait BaseSrcExt::fn get_blocksize -->
 Get the number of bytes that `self` will push out with each buffer.
 
@@ -1931,6 +2034,10 @@ as the stream-lock needs to be held.
 
 The format for the new segment will be the current format of the source, as
 configured with `BaseSrcExt::set_format`
+
+# Deprecated since 1.18
+
+Use `BaseSrc::new_segment`
 ## `start`
 The new start value for the segment
 ## `stop`
@@ -1941,6 +2048,25 @@ The new time value for the start of the new segment
 # Returns
 
 `true` if preparation of the seamless segment succeeded.
+<!-- trait BaseSrcExt::fn new_segment -->
+Prepare a new segment for emission downstream. This function must
+only be called by derived sub-classes, and only from the `BaseSrcClass::create` function,
+as the stream-lock needs to be held.
+
+The format for the `segment` must be identical with the current format
+of the source, as configured with `BaseSrcExt::set_format`.
+
+The format of `self` must not be `gst::Format::Undefined` and the format
+should be configured via `BaseSrcExt::set_format` before calling this method.
+
+Feature: `v1_18`
+
+## `segment`
+a pointer to a `gst::Segment`
+
+# Returns
+
+`true` if preparation of new segment succeeded.
 <!-- trait BaseSrcExt::fn query_latency -->
 Query the source for the latency parameters. `live` will be `true` when `self` is
 configured as a live source. `min_latency` and `max_latency` will be set
@@ -1963,7 +2089,7 @@ Configure async behaviour in `self`, no state change will block. The open,
 close, start, stop, play and pause virtual methods will be executed in a
 different thread and are thus allowed to perform blocking operations. Any
 blocking operation should be unblocked with the unlock vmethod.
-## `async`
+## `async_`
 new async mode
 <!-- trait BaseSrcExt::fn set_automatic_eos -->
 If `automatic_eos` is `true`, `self` will automatically go EOS if a buffer
@@ -2179,6 +2305,8 @@ It provides for:
  * Implied `true` if no transform function is implemented.
  * Implied `false` if ONLY transform function is implemented.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`BaseTransformExt`](trait.BaseTransformExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`BaseTransformExtManual`](prelude/trait.BaseTransformExtManual.html)
@@ -2197,8 +2325,7 @@ Unref the `allocator` after use.
 the `gst::Allocator`
 used
 ## `params`
-the
+the `gst::AllocationParams` of `allocator`
-`gst::AllocationParams` of `allocator`
 <!-- trait BaseTransformExt::fn get_buffer_pool -->
 
 # Returns

docs/gstreamer-gl/docs.md

@@ -125,6 +125,8 @@ output `gst::Caps`
 of the limitation on OpenGL context, this object is not thread safe unless
 specified and must only be activated in a single thread.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`GLContextExt`](trait.GLContextExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`GLContextExtManual`](prelude/trait.GLContextExtManual.html)
@@ -486,7 +488,7 @@ Trait containing all `GLDisplay` methods.
 
 # Implementors
 
-[`GLDisplayEGL`](struct.GLDisplayEGL.html), [`GLDisplayWayland`](struct.GLDisplayWayland.html), [`GLDisplayX11`](struct.GLDisplayX11.html), [`GLDisplay`](struct.GLDisplay.html)
+[`GLDisplay`](struct.GLDisplay.html)
 <!-- impl GLDisplay::fn new -->
 
 # Returns
@@ -539,14 +541,6 @@ a comparison function to run
 
 The first `GLWindow` that causes a match
  from `compare_func`
-<!-- trait GLDisplayExt::fn get_foreign_display -->
-
-Feature: `v1_18`
-
-
-# Returns
-
-whether the context belongs to a foreign display
 <!-- trait GLDisplayExt::fn get_gl_api -->
 see `GLDisplayExt::filter_gl_api` for what the returned value represents
 
@@ -612,31 +606,6 @@ other context to share resources with.
 # Returns
 
 the new context.
-<!-- struct GLDisplayEGL -->
-the contents of a `GLDisplayEGL` are private and should only be accessed
-through the provided API
-
-# Implements
-
-[`GLDisplayExt`](trait.GLDisplayExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)
-<!-- impl GLDisplayEGL::fn new -->
-Create a new `GLDisplayEGL` using the default EGL_DEFAULT_DISPLAY.
-
-# Returns
-
-a new `GLDisplayEGL` or `None`
-<!-- impl GLDisplayEGL::fn get_from_native -->
-Attempts to create a new `EGLDisplay` from `display`. If `type_` is
-`GLDisplayType::Any`, then `display` must be 0. `type_` must not be
-`GLDisplayType::None`.
-## `type_`
-a `GLDisplayType`
-## `display`
-pointer to a display (or 0)
-
-# Returns
-
-A `EGLDisplay` or `EGL_NO_DISPLAY`
 <!-- struct GLDisplayType -->
 <!-- struct GLDisplayType::const NONE -->
 no display type
@@ -660,54 +629,6 @@ Mesa3D GBM display
 EGLDevice display (Since: 1.18)
 <!-- struct GLDisplayType::const ANY -->
 any display type
-<!-- struct GLDisplayWayland -->
-the contents of a `GLDisplayWayland` are private and should only be accessed
-through the provided API
-
-# Implements
-
-[`GLDisplayExt`](trait.GLDisplayExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)
-<!-- impl GLDisplayWayland::fn new -->
-Create a new `GLDisplayWayland` from the wayland display name. See `wl_display_connect`()
-for details on what is a valid name.
-## `name`
-a display name
-
-# Returns
-
-a new `GLDisplayWayland` or `None`
-<!-- impl GLDisplayWayland::fn new_with_display -->
-Creates a new display connection from a wl_display Display.
-## `display`
-an existing, wayland display
-
-# Returns
-
-a new `GLDisplayWayland`
-<!-- struct GLDisplayX11 -->
-the contents of a `GLDisplayX11` are private and should only be accessed
-through the provided API
-
-# Implements
-
-[`GLDisplayExt`](trait.GLDisplayExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)
-<!-- impl GLDisplayX11::fn new -->
-Create a new `GLDisplayX11` from the x11 display name. See `XOpenDisplay`()
-for details on what is a valid name.
-## `name`
-a display name
-
-# Returns
-
-a new `GLDisplayX11` or `None`
-<!-- impl GLDisplayX11::fn new_with_display -->
-Creates a new display connection from a X11 Display.
-## `display`
-an existing, x11 display
-
-# Returns
-
-a new `GLDisplayX11`
 <!-- enum GLFormat -->
 <!-- enum GLFormat::variant Luminance -->
 Single component replicated across R, G, and B textures
@@ -1427,14 +1348,21 @@ Dubois optimised Red-Cyan anaglyph
 <!-- enum GLStereoDownmix::variant AmberBlueDubois -->
 Dubois optimised Amber-Blue anaglyph
 <!-- enum GLTextureTarget -->
+The OpenGL texture target that an OpenGL texture can be bound to. The
+`gst_gl_value_set_texture_target_from_mask`,
+`gst_gl_value_get_texture_target_mask`, and
+`gst_gl_value_set_texture_target` functions can be used for handling texture
+targets with `gobject::Value`'s when e.g. dealing with `gst::Caps`.
 <!-- enum GLTextureTarget::variant None -->
 no texture target
 <!-- enum GLTextureTarget::variant 2d -->
-2D texture target
+2D texture target (`GL_TEXTURE_2D`)
 <!-- enum GLTextureTarget::variant Rectangle -->
 rectangle texture target
+ (`GL_TEXTURE_RECTANGLE`)
 <!-- enum GLTextureTarget::variant ExternalOes -->
 external oes texture target
+ (`GL_TEXTURE_EXTERNAL_OES`)
 <!-- struct GLUpload -->
 `GLUpload` is an object that uploads data from system memory into GL textures.
 
@@ -1572,6 +1500,8 @@ the converted `gst::Caps`
 GstGLWindow represents a window that elements can render into. A window can
 either be a user visible window (onscreen) or hidden (offscreen).
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`GLWindowExt`](trait.GLWindowExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)

docs/gstreamer-gl/egl/docs.md

@@ -0,0 +1,37 @@
+<!-- file * -->
+<!-- struct GLDisplayEGL -->
+the contents of a `GLDisplayEGL` are private and should only be accessed
+through the provided API
+
+# Implements
+
+[`gst_gl::GLDisplayExt`](../gst_gl/trait.GLDisplayExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)
+<!-- impl GLDisplayEGL::fn new -->
+Create a new `GLDisplayEGL` using the default EGL_DEFAULT_DISPLAY.
+
+# Returns
+
+a new `GLDisplayEGL` or `None`
+<!-- impl GLDisplayEGL::fn from_gl_display -->
+Creates a EGL display connection from a native Display.
+
+This function will return the same value for multiple calls with the same
+`display`.
+## `display`
+an existing `gst_gl::GLDisplay`
+
+# Returns
+
+a new `GLDisplayEGL`
+<!-- impl GLDisplayEGL::fn get_from_native -->
+Attempts to create a new `EGLDisplay` from `display`. If `type_` is
+`gst_gl::GLDisplayType::Any`, then `display` must be 0. `type_` must not be
+`gst_gl::GLDisplayType::None`.
+## `type_`
+a `gst_gl::GLDisplayType`
+## `display`
+pointer to a display (or 0)
+
+# Returns
+
+A `EGLDisplay` or `EGL_NO_DISPLAY`

docs/gstreamer-gl/wayland/docs.md

@@ -0,0 +1,25 @@
+<!-- file * -->
+<!-- struct GLDisplayWayland -->
+the contents of a `GLDisplayWayland` are private and should only be accessed
+through the provided API
+
+# Implements
+
+[`gst_gl::GLDisplayExt`](../gst_gl/trait.GLDisplayExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)
+<!-- impl GLDisplayWayland::fn new -->
+Create a new `GLDisplayWayland` from the wayland display name. See `wl_display_connect`()
+for details on what is a valid name.
+## `name`
+a display name
+
+# Returns
+
+a new `GLDisplayWayland` or `None`
+<!-- impl GLDisplayWayland::fn new_with_display -->
+Creates a new display connection from a wl_display Display.
+## `display`
+an existing, wayland display
+
+# Returns
+
+a new `GLDisplayWayland`

docs/gstreamer-gl/x11/docs.md

@@ -0,0 +1,25 @@
+<!-- file * -->
+<!-- struct GLDisplayX11 -->
+the contents of a `GLDisplayX11` are private and should only be accessed
+through the provided API
+
+# Implements
+
+[`gst_gl::GLDisplayExt`](../gst_gl/trait.GLDisplayExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)
+<!-- impl GLDisplayX11::fn new -->
+Create a new `GLDisplayX11` from the x11 display name. See `XOpenDisplay`()
+for details on what is a valid name.
+## `name`
+a display name
+
+# Returns
+
+a new `GLDisplayX11` or `None`
+<!-- impl GLDisplayX11::fn new_with_display -->
+Creates a new display connection from a X11 Display.
+## `display`
+an existing, x11 display
+
+# Returns
+
+a new `GLDisplayX11`

docs/gstreamer-pbutils/docs.md

@@ -382,7 +382,7 @@ a `glib::List` of `DiscovererStreamInfo`
 # Returns
 
 the `gst::Caps` of the stream. Unref with
-`gst::Caps::unref` after usage.
+`gst_caps_unref` after usage.
 <!-- trait DiscovererStreamInfoExt::fn get_misc -->
 
 # Deprecated
@@ -650,7 +650,7 @@ Computes the full output caps that this `self` will be able to consume.
 # Returns
 
 The full caps the given `self` can consume. Call
-`gst::Caps::unref` when you are done with the caps.
+`gst_caps_unref` when you are done with the caps.
 <!-- trait EncodingProfileExt::fn get_name -->
 
 # Returns
@@ -752,14 +752,17 @@ for more about restrictions. Does not apply to `EncodingContainerProfile`.
 ## `restriction`
 the restriction to apply
 <!-- trait EncodingProfileExt::fn set_single_segment -->
-If using a single segment, buffers will be retimestamped
+If using a single segment, buffers will be retimestamped and segments will be
-and segments will be eat so as to appear as one segment.
+eat so as to appear as one segment.
+
+> *NOTE*: Single segment is not property supported when using
+> `encodebin:avoid-reencoding`
 
 Feature: `v1_18`
 
 ## `single_segment`
-`true` if the stream represented by `self` should use a single
+`true` if the stream represented by `self` should use a
-segment before the encoder `false` otherwise.
+single segment before the encoder, `false` otherwise.
 <!-- struct EncodingTarget -->
 Collection of `EncodingProfile` for a specific target or use-case.
 
@@ -925,6 +928,8 @@ Get the pass number if this is part of a multi-pass profile.
 The pass number. Starts at 1 for multi-pass. 0 if this is
 not a multi-pass profile
 <!-- impl EncodingVideoProfile::fn get_variableframerate -->
+> *NOTE*: Fixed framerate won't be enforced when `encodebin:avoid-reencoding`
+> is set.
 
 # Returns
 

docs/gstreamer-player/docs.md

@@ -571,6 +571,8 @@ Base structure for information concerning a media stream. Depending on
 the stream type, one can find more media-specific information in
 `PlayerVideoInfo`, `PlayerAudioInfo`, `PlayerSubtitleInfo`.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`PlayerStreamInfoExt`](trait.PlayerStreamInfoExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)

docs/gstreamer-rtsp-server/docs.md

@@ -2372,7 +2372,7 @@ Retrieve the current caps of `self`.
 # Returns
 
 the `gst::Caps` of `self`.
-use `gst::Caps::unref` after usage.
+use `gst_caps_unref` after usage.
 <!-- trait RTSPStreamExt::fn get_control -->
 Get the control string to identify this stream.
 

docs/gstreamer-video/docs.md

@@ -292,13 +292,15 @@ non-linear RGB (R'G'B')
 <!-- enum VideoColorMatrix::variant Unknown -->
 unknown matrix
 <!-- enum VideoColorMatrix::variant Rgb -->
-identity matrix
+identity matrix. Order of coefficients is
+actually GBR, also IEC 61966-2-1 (sRGB)
 <!-- enum VideoColorMatrix::variant Fcc -->
-FCC color matrix
+FCC Title 47 Code of Federal Regulations 73.682 (a)(20)
 <!-- enum VideoColorMatrix::variant Bt709 -->
-ITU-R BT.709 color matrix
+ITU-R BT.709 color matrix, also ITU-R BT1361
+/ IEC 61966-2-4 xvYCC709 / SMPTE RP177 Annex B
 <!-- enum VideoColorMatrix::variant Bt601 -->
-ITU-R BT.601 color matrix
+ITU-R BT.601 color matrix, also SMPTE170M / ITU-R BT1358 525 / ITU-R BT1700 NTSC
 <!-- enum VideoColorMatrix::variant Smpte240m -->
 SMPTE 240M color matrix
 <!-- enum VideoColorMatrix::variant Bt2020 -->
@@ -309,29 +311,38 @@ the CIE XYZ colorspace.
 <!-- enum VideoColorPrimaries::variant Unknown -->
 unknown color primaries
 <!-- enum VideoColorPrimaries::variant Bt709 -->
-BT709 primaries
+BT709 primaries, also ITU-R BT1361 / IEC
+61966-2-4 / SMPTE RP177 Annex B
 <!-- enum VideoColorPrimaries::variant Bt470m -->
-BT470M primaries
+BT470M primaries, also FCC Title 47 Code
+of Federal Regulations 73.682 (a)(20)
 <!-- enum VideoColorPrimaries::variant Bt470bg -->
-BT470BG primaries
+BT470BG primaries, also ITU-R BT601-6
+625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM
 <!-- enum VideoColorPrimaries::variant Smpte170m -->
-SMPTE170M primaries
+SMPTE170M primaries, also ITU-R
+BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC
 <!-- enum VideoColorPrimaries::variant Smpte240m -->
 SMPTE240M primaries
 <!-- enum VideoColorPrimaries::variant Film -->
-Generic film
+Generic film (colour filters using
+Illuminant C)
 <!-- enum VideoColorPrimaries::variant Bt2020 -->
-BT2020 primaries. Since: 1.6
+ITU-R BT2020 primaries. Since: 1.6
 <!-- enum VideoColorPrimaries::variant Adobergb -->
 Adobe RGB primaries. Since: 1.8
 <!-- enum VideoColorPrimaries::variant Smptest428 -->
-SMPTE ST 428 primaries. Since: 1.16
+SMPTE ST 428 primaries (CIE 1931
+XYZ). Since: 1.16
 <!-- enum VideoColorPrimaries::variant Smpterp431 -->
-SMPTE RP 431 primaries. Since: 1.16
+SMPTE RP 431 primaries (ST 431-2
+(2011) / DCI P3). Since: 1.16
 <!-- enum VideoColorPrimaries::variant Smpteeg432 -->
-SMPTE EG 432 primaries. Since: 1.16
+SMPTE EG 432 primaries (ST 432-1
+(2010) / P3 D65). Since: 1.16
 <!-- enum VideoColorPrimaries::variant Ebu3213 -->
-EBU 3213 primaries. Since: 1.16
+EBU 3213 primaries (JEDEC P22
+phosphors). Since: 1.16
 <!-- enum VideoColorRange -->
 Possible color range values. These constants are defined for 8 bit color
 values and can be scaled for other bit depths.
@@ -447,6 +458,8 @@ The bare minimum that a functional subclass needs to implement is:
  * Accept data in `handle_frame` and provide decoded results to
  `VideoDecoder::finish_frame`, or call `VideoDecoder::drop_frame`.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`VideoDecoderExt`](trait.VideoDecoderExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`VideoDecoderExtManual`](prelude/trait.VideoDecoderExtManual.html)
@@ -680,7 +693,7 @@ Feature: `v1_16`
 
 ## `fmt`
 a `VideoFormat`
-## `mode`
+## `interlace_mode`
 A `VideoInterlaceMode`
 ## `width`
 The width in pixels
@@ -859,6 +872,8 @@ use `VideoEncoderExt::get_max_encode_time` to check if input frames
 are already late and drop them right away to give a chance to the
 pipeline to catch up.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`VideoEncoderExt`](trait.VideoEncoderExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html), [`VideoEncoderExtManual`](prelude/trait.VideoEncoderExtManual.html)
@@ -1137,6 +1152,8 @@ Provides useful functions and a base class for video filters.
 The videofilter will by default enable QoS on the parent GstBaseTransform
 to implement frame dropping.
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`gst_base::BaseTransformExt`](../gst_base/trait.BaseTransformExt.html), [`gst::ElementExt`](../gst/trait.ElementExt.html), [`gst::ObjectExt`](../gst/trait.ObjectExt.html), [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)
@@ -1352,6 +1369,10 @@ packed 4:2:2 YUV, 12 bits per channel (Y-U-Y-V) (Since: 1.18)
 packed 4:4:4:4 YUV, 12 bits per channel(U-Y-V-A...) (Since: 1.18)
 <!-- enum VideoFormat::variant Y412Le -->
 packed 4:4:4:4 YUV, 12 bits per channel(U-Y-V-A...) (Since: 1.18)
+<!-- enum VideoFormat::variant Nv124l4 -->
+NV12 with 4x4 tiles in linear order.
+<!-- enum VideoFormat::variant Nv1232l32 -->
+NV12 with 32x32 tiles in linear order.
 <!-- struct VideoFormatFlags -->
 The different video flags that a format info can have.
 <!-- struct VideoFormatFlags::const YUV -->
@@ -1570,7 +1591,7 @@ frames contains both interlaced and
 1 field is stored in one buffer,
  `GST_VIDEO_BUFFER_FLAG_TF` or `GST_VIDEO_BUFFER_FLAG_BF` indicates if
  the buffer is carrying the top or bottom field, respectively. The top and
- bottom buffers are expected to alternate in the pipeline, with this mode
+ bottom buffers must alternate in the pipeline, with this mode
  (Since: 1.16).
 <!-- enum VideoMatrixMode -->
 Different color matrix conversion modes
@@ -1710,6 +1731,108 @@ Multiple views are
 provided as separate `gst::Memory` framebuffers attached to each
 `gst::Buffer`, described by the `GstVideoMultiviewMeta`
 and `VideoMeta`(s)
+<!-- struct VideoOrientation -->
+The interface allows unified access to control flipping and autocenter
+operation of video-sources or operators.
+
+# Implements
+
+[`VideoOrientationExt`](trait.VideoOrientationExt.html)
+<!-- trait VideoOrientationExt -->
+Trait containing all `VideoOrientation` methods.
+
+# Implementors
+
+[`VideoOrientation`](struct.VideoOrientation.html)
+<!-- trait VideoOrientationExt::fn get_hcenter -->
+Get the horizontal centering offset from the given object.
+## `center`
+return location for the result
+
+# Returns
+
+`true` in case the element supports centering
+<!-- trait VideoOrientationExt::fn get_hflip -->
+Get the horizontal flipping state (`true` for flipped) from the given object.
+## `flip`
+return location for the result
+
+# Returns
+
+`true` in case the element supports flipping
+<!-- trait VideoOrientationExt::fn get_vcenter -->
+Get the vertical centering offset from the given object.
+## `center`
+return location for the result
+
+# Returns
+
+`true` in case the element supports centering
+<!-- trait VideoOrientationExt::fn get_vflip -->
+Get the vertical flipping state (`true` for flipped) from the given object.
+## `flip`
+return location for the result
+
+# Returns
+
+`true` in case the element supports flipping
+<!-- trait VideoOrientationExt::fn set_hcenter -->
+Set the horizontal centering offset for the given object.
+## `center`
+centering offset
+
+# Returns
+
+`true` in case the element supports centering
+<!-- trait VideoOrientationExt::fn set_hflip -->
+Set the horizontal flipping state (`true` for flipped) for the given object.
+## `flip`
+use flipping
+
+# Returns
+
+`true` in case the element supports flipping
+<!-- trait VideoOrientationExt::fn set_vcenter -->
+Set the vertical centering offset for the given object.
+## `center`
+centering offset
+
+# Returns
+
+`true` in case the element supports centering
+<!-- trait VideoOrientationExt::fn set_vflip -->
+Set the vertical flipping state (`true` for flipped) for the given object.
+## `flip`
+use flipping
+
+# Returns
+
+`true` in case the element supports flipping
+<!-- enum VideoOrientationMethod -->
+The different video orientation methods.
+<!-- enum VideoOrientationMethod::variant Identity -->
+Identity (no rotation)
+<!-- enum VideoOrientationMethod::variant 90r -->
+Rotate clockwise 90 degrees
+<!-- enum VideoOrientationMethod::variant 180 -->
+Rotate 180 degrees
+<!-- enum VideoOrientationMethod::variant 90l -->
+Rotate counter-clockwise 90 degrees
+<!-- enum VideoOrientationMethod::variant Horiz -->
+Flip horizontally
+<!-- enum VideoOrientationMethod::variant Vert -->
+Flip vertically
+<!-- enum VideoOrientationMethod::variant UlLr -->
+Flip across upper left/lower right diagonal
+<!-- enum VideoOrientationMethod::variant UrLl -->
+Flip across upper right/lower left diagonal
+<!-- enum VideoOrientationMethod::variant Auto -->
+Select flip method based on image-orientation tag
+<!-- enum VideoOrientationMethod::variant Custom -->
+Current status depends on plugin internal setup
+
+Feature: `v1_10`
+
 <!-- struct VideoOverlay -->
 The `VideoOverlay` interface is used for 2 main purposes :
 
@@ -2156,6 +2279,8 @@ Every four adjacent blocks - two
  horizontally and two vertically are grouped together and are located
  in memory in Z or flipped Z order. In case of odd rows, the last row
  of blocks is arranged in linear order.
+<!-- enum VideoTileMode::variant Linear -->
+Tiles are in row order.
 <!-- struct VideoTimeCode -->
 `field_count` must be 0 for progressive video and 1 or 2 for interlaced.
 
@@ -2537,21 +2662,22 @@ Gamma 2.0 curve
 Gamma 2.2 curve
 <!-- enum VideoTransferFunction::variant Bt709 -->
 Gamma 2.2 curve with a linear segment in the lower
- range
+ range, also ITU-R BT470M / ITU-R BT1700 625 PAL &
+ SECAM / ITU-R BT1361
 <!-- enum VideoTransferFunction::variant Smpte240m -->
 Gamma 2.2 curve with a linear segment in the
  lower range
 <!-- enum VideoTransferFunction::variant Srgb -->
 Gamma 2.4 curve with a linear segment in the lower
- range
+ range. IEC 61966-2-1 (sRGB or sYCC)
 <!-- enum VideoTransferFunction::variant Gamma28 -->
-Gamma 2.8 curve
+Gamma 2.8 curve, also ITU-R BT470BG
 <!-- enum VideoTransferFunction::variant Log100 -->
 Logarithmic transfer characteristic
  100:1 range
 <!-- enum VideoTransferFunction::variant Log316 -->
 Logarithmic transfer characteristic
- 316.22777:1 range
+ 316.22777:1 range (100 * sqrt(10) : 1)
 <!-- enum VideoTransferFunction::variant Bt202012 -->
 Gamma 2.2 curve with a linear segment in the lower
  range. Used for BT.2020 with 12 bits per
@@ -2561,7 +2687,7 @@ Gamma 2.19921875. Since: 1.8
 <!-- enum VideoTransferFunction::variant Bt202010 -->
 Rec. ITU-R BT.2020-2 with 10 bits per component.
  (functionally the same as the values
- GST_VIDEO_TRANSFER_BT709 and GST_VIDEO_TRANSFER_BT2020_12).
+ GST_VIDEO_TRANSFER_BT709 and GST_VIDEO_TRANSFER_BT601).
  Since: 1.18
 <!-- enum VideoTransferFunction::variant Smpte2084 -->
 SMPTE ST 2084 for 10, 12, 14, and 16-bit systems.
@@ -2571,3 +2697,5 @@ SMPTE ST 2084 for 10, 12, 14, and 16-bit systems.
 Association of Radio Industries and Businesses (ARIB)
  STD-B67 and Rec. ITU-R BT.2100-1 hybrid loggamma (HLG) system
  Since: 1.18
+<!-- enum VideoTransferFunction::variant Bt601 -->
+also known as SMPTE170M / ITU-R BT1358 525 or 625 / ITU-R BT1700 NTSC

docs/gstreamer-webrtc/docs.md

@@ -38,6 +38,8 @@ connected
 <!-- struct WebRTCDataChannel -->
 
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 Feature: `v1_18`
 
 # Implements
@@ -170,6 +172,8 @@ controlling
 <!-- struct WebRTCICETransport -->
 
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)
@@ -219,6 +223,8 @@ Feature: `v1_16`
 <!-- struct WebRTCRTPTransceiver -->
 
 
+This is an Abstract Base Class, you cannot instantiate it.
+
 # Implements
 
 [`glib::object::ObjectExt`](../glib/object/trait.ObjectExt.html)