mirrors/gst-plugins-rs
mirrors/gst-plugins-rs
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs.git synced 2024-12-23 18:40:32 +00:00
Code Issues Projects Releases Wiki Activity
1563 commits 14 branches 101 tags 30 MiB
Commit graph

181 commits

Author SHA1 Message Date
Jan Alexander Steffens (heftig)
68c55ca413
fallbackswitch: Recheck active_sinkpad after schedule_timeout 
`schedule_timeout` can synchronously call `handle_timeout` and change the
active pad. We need to update `is_active` afterwards.

After calling `schedule_timeout` with `end_running_time`, we used to
assume there was no pad switch and reset `switched_pad` immediately. If
the pad actually got switched, this would make us miss a sticky events
update.
 2022-05-25 17:53:55 +02:00
Jan Alexander Steffens (heftig)
d27e279272
fallbackswitch: Move active_sinkpad out of State into its own Mutex 
As described in issue #200, we hold the srcpad's stream lock in some
situations where we notify the `active-pad` property.

If there's a handler installed it will most likely attempt to read the
property, which had to take the `state` lock. Another thread could
already be holding this lock and attempting to obtain the srcpad's
stream lock. This resulted in a deadlock.

To avoid this, move the `active_sinkpad` field into its own Mutex, which
we never hold for long.

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/200
 2022-05-12 16:52:07 +02:00
Vivia Nikolaidou
385a983e5f fallbackswitch: Fix racy manual switching test 
The element has a small race condition where it might output two buffers
with the same running time during e.g. a manual switch. In practice this
is not a problem, so the test takes this race into account.

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/195
 2022-04-18 16:13:00 +03:00
Sebastian Dröge
e82678586f fallbackswitch: Remove a redundant pad state unlock/lock 2022-04-14 08:14:26 +00:00
Sebastian Dröge
279dd7d053 fallbackswitch: Set end running time as current running time once a buffer has passed 2022-04-14 08:14:26 +00:00
Sebastian Dröge
4aa00c9eca fallbackswitch: Don't configure a framerate in the test 
The tests assume that buffers have no known duration and would deadlock
otherwise because timeouts are scheduled to the end of a buffer.
 2022-04-14 08:14:26 +00:00
Sebastian Dröge
f5260f9b36 fallbackswitch: Explictly set priority of pads in the test 2022-04-14 08:14:26 +00:00
Sebastian Dröge
0ca0d485a0 fallbackswitch: Log affected pad when scheduling buffer waiting for it 2022-04-14 08:14:26 +00:00
Sebastian Dröge
d73bce2985 fallbackswitch: Only update the output running time if it's increasing 2022-04-14 08:14:26 +00:00
Sebastian Dröge
930cdca750 fallbackswitch: Only drop raw audio/video buffers if they're trailing 
Otherwise this can cause decoding errors further downstream.
 2022-04-14 08:14:26 +00:00
Sebastian Dröge
bbb7ced95a fallbackswitch: Improve some debug outputs 
Don't print "buffer buffer ...".
 2022-04-14 08:14:26 +00:00
Sebastian Dröge
ca7cf7dee7 fallbackswitch: Fix clipping of buffers against the output running time 
To handle buffers outside the segment correctly.

Also fix debug output to print the correct value.
 2022-04-14 08:14:26 +00:00
Sebastian Dröge
617a2ef49e fallbackswitch: Clip buffers against the segment 
Also clip raw audio/video buffers according to the caps if they have the
relevant information in the caps, and drop raw audio samples if they're
outside the segment too.

In addition also set durations on raw audio/video buffers based on the
caps if no duration is set.
 2022-04-14 08:14:26 +00:00
Sebastian Dröge
6ce523a7a8 fallbackswitch: Improve debug output of clock times and simplify some code 2022-04-14 08:14:26 +00:00
Seungha Yang
930cc41aaa fallbacksrc: Don't forward manual flush events to downstream 
fallbackswitch might forward flush event if it's for the currently
active pad. But forwarded flush event will be problematic in various
reasons and that's not a behavior we expected.
 2022-04-12 23:21:32 +09:00
Sebastian Dröge
5788837fb6 fallbacksrc: Unflush downstream pads of the source after shutting down everything 
Otherwise the pads might still be flushing on the next try and the
source would never recover.
 2022-04-12 14:40:08 +03:00
Sebastian Dröge
7233d6936c fallbacksrc: Remove imagefreeze if it becomes unneeded 2022-04-12 14:37:29 +03:00
Vivia Nikolaidou
de936f42e9 fallbackswitch: Minor cleanup in get_sync_time 2022-04-11 15:57:20 +03:00
Sebastian Dröge
3de317b3c9 fallbacksrc: Don't panic when shutting down the source and there are source pad blocks but no actual source pads 
This can happen if the source removed the actual source pad already but
our downstream pad that is blocked still exists.
 2022-04-11 11:01:27 +00:00
Sebastian Dröge
84402f39ef fallbacksrc: Reset state in fallbacksrc custom source also if changing the state to READY before failed 
Otherwise it will panic on the next try because always pads are already
linked to the ghostpads.
 2022-04-11 11:01:27 +00:00
Vivia Nikolaidou
0ba6ebb10f fallbackswitch: Notify active-pad without state lock held 
Can otherwise deadlock.
 2022-04-11 10:48:28 +00:00
Sebastian Dröge
08379ab389 fallbacksrc: Request the main pad first from fallbackswitch 
By default the first created pad is the active one before the
fallbackswitch is actually processing data.
 2022-04-08 20:24:03 +03:00
Sebastian Dröge
96c28a5728 fallbackswitch: Only notify active-pad property on state changes if it actually changed 2022-04-08 20:23:28 +03:00
Sebastian Dröge
452ea76a69 fallbackswitch: Rename debug category from fallback-switch to fallbackswitch 
The element name is without hyphen so the debug category should ideally
too to reduce confusion.
 2022-04-08 20:07:01 +03:00
Sebastian Dröge
d3d98c73ca fallbacksrc: Connect to notify::active-pad after requesting pads 
Requesting the first pad will emit the property because the first pad is
then selected. That will cause the callback to be called, which tries to
take the same mutex that is already locked during element setup and
causes a deadlock.
 2022-04-08 19:53:38 +03:00
Sebastian Dröge
803e452889 Update minimum supported GStreamer version to 1.14 2022-04-07 12:41:54 +03:00
Jan Alexander Steffens (heftig)
0a3e9c81f9
fallbackswitch: Add missing requires_private 2022-04-06 11:11:25 +02:00
Jan Schmidt
bd2ff494c7 fallbackswitch: Replace with priorityswitch 
fallbackswitch now supports multiple sink pads, and on a timeout of the
active pad, it will automatically switch to the next lowest priority pad
that has data available.

fallbackswitch sink pads follow the `sink_%u` template and have
`priority` as a pad property.

Co-authored-by: Vivia Nikolaidou <vivia.nikolaidou@ltnglobal.com>
 2022-04-05 18:52:31 +03:00
Vivia Nikolaidou
c6feb31207 Revert "fallbackswitch: Forward custom downstream events from active sinkpad" 
This reverts commit 9ebbae9d27.

It works even without the change.
 2022-03-22 13:11:00 +02:00
Vivia Nikolaidou
9ebbae9d27 fallbackswitch: Forward custom downstream events from active sinkpad 
This will allow us to forward e.g. SCTE-35 events
 2022-03-21 15:30:36 +02:00
Sebastian Dröge
4a54001aed fallbacksrc: Flush source before restarting on errors 
It might still be blocked downstream for a while, e.g. in the clocksync.

Flushing does not cause any problems as fallbackswitch is not going to
forward it and will only unblock everything up to there.
 2022-03-17 16:12:34 +00:00
Guillaume Desmottes
8389bff7d8 fallbackswitch: properly handle GAP events 
Handle GAP events from the active pad as activity and forward
downstream.
 2022-03-03 11:48:26 +01:00
Guillaume Desmottes
7b109785be fallbackswitch: factor out handle_main_timed_item() 
No semantic change, I'll re-use this to handle GAP events.
 2022-03-03 10:01:59 +01:00
Guillaume Desmottes
31864c9a9d fallbackswitch: add support for buffers without pts 
Re-use the previously seen PTS.

Fix #186
 2022-03-02 13:32:06 +01:00
Guillaume Desmottes
73cfb357c6 fallbackswitch: export GEnum used in properties 
Rust applications will be able to use those directly.
 2022-03-01 14:44:16 +01:00
Sebastian Dröge
b38f6cc731 Remove now unnecessary Send+Sync impls for element/etc subclasses 
This is now automatically implemented.
 2022-02-28 18:56:58 +02:00
Seungha Yang
de2ea8a1b2 fallbacksrc: Disconnect signals on ReadyToNull 
Otherwise multiple signal handlers will be connected to the source
 2022-02-25 23:12:30 +09:00
Sebastian Dröge
a1e2debde4 fallbacksrc: Changing the URI of the video fallback is supported in NULL state 
And not just during construction.

This fixes switching from a failing video fallback to a dummy fallback,
which was added in c7fe08bf6.
 2022-02-24 12:29:53 +02:00
François Laignel
2cf84d5ce8 Update minimum supported Rust version to 1.57 2022-02-21 23:32:32 +01:00
François Laignel
422ea740ca Update to gst::_log_macro_ 
See the details:
https://gitlab.freedesktop.org/gstreamer/gstreamer-rs/-/merge_requests/980
 2022-02-21 20:50:01 +01:00
Sebastian Dröge
f44b86cd30 Simplify some code around event/query views 2022-01-22 12:18:02 +02:00
Sebastian Dröge
65fcd55160 Update for event/message/query view API changes 2022-01-19 15:07:45 +02:00
Sebastian Dröge
b2d0172422 Replace Foo::from_instance(foo) with foo.imp() 2022-01-17 19:36:41 +02:00
Sebastian Dröge
326449b3e6 Re-license LGPL-2.1 plugins to MPL-2 
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/168
 2022-01-15 21:05:11 +02:00
Sebastian Dröge
0c7764fa40 Update versions to 0.9.0 2022-01-15 20:33:49 +02:00
Sebastian Dröge
ab14c50d1c Ignore clippy::non_send_fields_in_send_ty lint 
It's useless in its current shape and wrongly triggering on all types.

See https://github.com/rust-lang/rust-clippy/issues/8045
 2022-01-14 12:09:57 +02:00
Sebastian Dröge
86021d637b fallbacksrc: Actually calculate running times of segment start/stop if the PTS is outside the segment 
Previously it was just using the segment start/stop without converting
it to the corresponding running time.
 2021-12-09 12:30:42 +02:00
Sebastian Dröge
86f422592b Update for glib::Enum / glib::Boxed / glib::flags! macro renames 2021-11-22 11:04:26 +02:00
Sebastian Dröge
c68f6b2631 Update for GLib signal emit_by_name() API changes 2021-11-21 18:15:04 +02:00
Sebastian Dröge
55aad51141 Update for glib constructor renames 
See https://github.com/gtk-rs/gtk-rs-core/pull/384
 2021-11-20 14:31:06 +02:00