There is now two elements, rtpsend and rtprecv that represent the two
halves of a rtpsession. This avoids the potential pipeline loop if two
peers are sending/receiving data towards each other. The two halves can
be connected by setting the rtp-id property on each element to the same
value and they will behave like a combined rtpbin-like element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1426>
Can receive and recevie one or more RTP sessions containing multiple
pt/ssrc combinations.
Demultiplexing happens internally instead of relying on separate
elements.
Co-Authored-By: François Laignel <francois@centricular.com>
Co-Authored-By: Mathieu Duponchelle <mathieu@centricular.com>
Co-Authored-By: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1426>
Add to awss3sink and awss3putobjectsink elements the following
paramerters which are set on the uploaded S3 objects:
* cache-control;
* content-encoding; and
* content-language
Bugfix: Set the content-type and content-disposition values in the S3
putobject call. Previously the params were defined on the element but
unused.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1585>
In our tests, the slope (found with linear regression) on a
history of the (smoothed) accumulated inter-group delays
gives a more stable congestion control. In particular,
low-end devices becomes less sensitive to spikes in
inter-group delay measurements.
This flavour of delay based bandwidth estimation with Google
Congestion Control is also what Chromium is using.
To make it easy to experiment with the new estimator, as
well as add support for new ones in the future, also add
infrastructure for making delay estimator flavour selectable
at runtime.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1566>
In some situations, a translated alternate audio stream for a content
might be available.
Instead of going through transcription and translation of the original
audio stream, it may be preferrable for accuracy purposes to simply
transcribe the secondary audio stream.
This MR adds support for doing just that:
* Secondary audio sink pads can be requested as "sink_audio_%u"
* Sometimes audio source pads are added at that point to pass through
the audio, as "src_audio_%u"
* The main transcription bin now contains per-input stream transcription
bins. Those can be individually controlled through properties on the
sink pads, for instance translation-languages can be dynamically set
per audio stream
* Some properties that originally existed on the main element still
remain, but are now simply mapped to the always audio sink pad
* Releasing of secondary sink pads is nominally implemented, but not
tested in states other than NULL
An example launch line for this would be:
```
$ gst-launch-1.0 transcriberbin name=transcriberbin latency=8000 accumulate-time=0 \
cc-caps="closedcaption/x-cea-708, format=cc_data" sink_audio_0::language-code="es-US" \
sink_audio_0::translation-languages="languages, transcript=cc3"
uridecodebin uri=file:///home/meh/Music/chaplin.mkv name=d
d. ! videoconvert ! transcriberbin.sink_video
d. ! clocksync ! audioconvert ! transcriberbin.sink_audio
transcriberbin.src_video ! cea608overlay field=1 ! videoconvert ! autovideosink \
transcriberbin.src_audio ! audioconvert ! fakesink \
uridecodebin uri=file:///home/meh/Music/chaplin-spanish.webm name=d2 \
d2. ! audioconvert ! transcriberbin.sink_audio_0 \
transcriberbin.src_audio_0 ! fakesink
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1546>
This commit implements [RFC 7273] (NTP & PTP clock signalling & synchronization)
for `webrtcsink` by adding the "ts-refclk" & "mediaclk" SDP media attributes to
identify the clock. These attributes are handled by `rtpjitterbuffer` on the
consumer side. They MUST be part of the SDP offer.
When used with an NTP or PTP clock, "mediaclk" indicates the RTP offset at the
clock's origin. Because the payloaders are not instantiated when the offer is
sent to the consumer, the RTP offset is set to 0 and the payloader
`timstamp-offset`s are set accordingly when they are created.
The `webrtc-precise-sync` examples were updated to be able to start with an NTP
(default), a PTP or the system clock (on the receiver only). The rtp jitter
buffer will synchronize with the clock signalled in the SDP offer provided the
sender is started with `--do-clock-signalling` & the receiver with
`--expect-clock-signalling`.
[RFC 7273]: https://datatracker.ietf.org/doc/html/rfc7273
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1500>
The goal is to be able to get back the original buffer
after performing analysis on a transformed version. Then put the
various GstMeta back on the original buffer.
An example pipeline would be
.. ! originalbuffersave ! videoscale ! analysis ! originalbufferestore ! draw_overlay ! sink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1428>
Instead of exposing all ids properties as strings, we now have two
signaller implementations exposing those properties using their actual
type. This API is more natural and save the element and application
conversions when using numerical ids (Janus's default).
I also removed the 'joined-id' property as it's actually the same id as
'feed-id'. I think it would be better to have a 'janus-state' property or
something like that for applications willing to know when the room has
been joined.
This id is also no longer generated by the element by default, as Janus
will take care of generating one if not provided.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1486>
GST_PLUGIN_FEATURE_RANK=rtspsrc2:1 gst-play-1.0 [URI]
Features:
* Live streaming N audio and N video
- With RTCP-based A/V sync
* Lower transports: TCP, UDP, UDP-Multicast
* RTP, RTCP SR, RTCP RR
* OPTIONS DESCRIBE SETUP PLAY TEARDOWN
* Custom UDP socket management, does not use udpsrc/udpsink
* Supports both rtpbin and the rtpbin2 rust rewrite
- Set USE_RTPBIN2=1 to use rtpbin2 (needs other MRs)
* Properties:
- protocols selection and priority (NEW!)
- location supports rtsp[ut]://
- port-start instead of port-range
Co-Authored-by: Tim-Philipp Müller <tim@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1425>
Implement new signaller WhipServerSignaller
- an http server using 'warp'
- handlers for the POST, OPTIONS, PATCH and DELETE
- fixed path `/whip/endpoint` as the URI
- fixed value 'whip-client' as the producer peer id
- fixed resource url `/whip/resource/whip-client`
Derive whipserversrc element from BaseWebRTCSrc
- implement constructed method for ObjectImpl to set
non-default signaller, i.e., WhipServerSignaller
- bind the properties stun-server and turn-servers to those on
the Signaller
Connect to 'webrtcbin-ready' signal in the constructor of WhipServerSignaller
- it will be emitted by the webrtcsrc when the webrtcbin element is ready
- the closure for this signal will in turn connect to webrtcbin's ice-gathering-state
and perform send with the answer sdp via the channel
- the WhipServer will hold its HTTP response in POST handler until this signal
is received or timeout which happens early
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1284>
add a new signal webrtcbin-ready in this place doing same
thing but can be used for both consumers and producers
Please note this change is only to the consumer-added
signal on the signaller interface.
The consumer-added signal on the webrtcsink is unchanged
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1284>
The "signaller" property used to be defined as MUTABLE_READY which meant that
the property was always set after `constructed()` was called.
Since `connect_signaller()` was called from `constructed()`, only the default
signaller was used.
This commit sets the "signaller" property as CONSTRUCT_ONLY. Using a builder,
this property will now be set before the call to `constructed()`.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1324>
This is required to take care of clock skew between
system time and pipeline time.
`track-pipeline-clock-for-pdt: true` mean utd time is
sampled for first segment and for subsequent segments
keep adding the time based on pipeline clock. difference
of segment duration and PDT time will match.
track-pipeline-clock-for-pdt: false` mean utd time is
sampled for each segment. system time may jump forward
or backward based on adjustments. If application needs
to synchronization of external events `false` is
recommended.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1145>
- connect to `format-location-full` it provide the first
sample of the fragment. preserve the running-time of the
first sample in fragment.
- on fragment-close message, find the mapping of running-time
to UTC time.
- on each subsequent fragment, calculate the offset of the
running-time with first fragment and add offset to base
utc time
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1145>
This new plugin exposes two elements, intersink and intersrc. These act
as wormholes for data in the same process and can be used to forward
data from one pipeline to another.
The implementation makes use of gstreamer-utils' StreamProducer, and
supports dynamically adding and removing consumers, before and after
producers, and changing producer names while PLAYING, both on the sink
and the src.
This initial implementation comes with a small demo, and a few tests.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1257>
This provides support GstNavigation events handling in webrtcsrc so that
a GStreamer client can be used to control remotely a GStreamer server,
similar to how the web client is capable of controlling a wpesrc.
This is part of a larger set of patches that require more work on the
sinks and sources.
server: d3d11screencapturesrc ! webrtcsink enable-data-channel-navigation=true
client: webrtcsrc enable-data-channel-navigation=true ! d3d11videosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1281>
When starting a webrtcsrc-signaller client in Listener mode, only the producers
started after the client connection were advertised. All currently
running producers were ignored unlike the gstwebrtc-api behavior. This
commit now lists all running producers when the client Listener connects
and advertises them through the "producer-added" signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1296>
Live input + is-live=false:
While not recording, drop input
When recording is started, offset to collapse the gap
Live input + is-live=true:
While not recording, drop input
Don't modify the offset
Non-live input + is-live=false:
While not recording, block input
Don't modify the offset
Non-live input + is-live=true:
While not recording, block input
When recording is started, offset to current running time
Co-authored-by: Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1206>
Fix the following use case:
- main input of fallbackswitch is finite (a media file)
- fallback input is infinite (videotestsrc)
- main input is done and send eos, which is propagated downstream
- fallbackswitch switches to fallback, sending STREAM_START which reset
EOS downstream (aggregator does that)
- fallback input keeps pushing buffers forever.
Solve it by adding a 'stop-on-eos' property so fallbackswitch stops
pushing property once the main input is eos.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1242>
This signal is emitted as soon as the pipeline for each consumer
is created, and can be used by applications that require a greater
level of control over webrtcsink's internals.
An example is also provided to demonstrate usage
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1220>
Session ending is bidirectional: the signaller can tell the sink that a
session was ended, and the sink can tell the signaller to end a session.
As such, two signals are needed, before this patch the second case was
not working as in essence the sink was telling itself that a session was
ended, and obviously failing to even find it when trying to end it again.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1167>
With this, if the transcriber element in use supports "translation_src_"
request source pads, the user can now specify what languages to
translate to and how to map them to 608 channels (only CC1 and CC3 are
supported).
For instance, translation-languages="languages, CC3=transcript, CC1=fr"
will cause the original transcript to be muxed into the CC3 channel, and
the French translation to be muxed into the CC1 channel.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1149>
