The base receive time should not be the monotonic system clock time, but
the monotonic system clock time adjusted by the current clock calibration.
For the first time this is equivalent as the clock calibration is the default,
but for further discontinuities it is not and would cause a
discontinuity in the clock times at this point.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1766>
When we receive a new alternative we want to avoid iterating out of
bounds, but the comparison between the current index and the length of
the alternative should not log an error when partial_index == length, as
Vec::drain(length..) is valid, and it is completely valid for AWS to
send us a new alternative with as many items as we have already
dequeued.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1751>
1c48d7065d was mistakenly merged too
early, and there were concerns about the implementation and API design:
The fact that the frontend had to expose a text area specifically for
sending over a mix matrix, and had to manually edit in floats into the
stringified JSON was suboptimal.
Said text area was always present even when remote control was not
enabled.
The sendControlRequest API was made more complex than needed by
accepting an optional stringifier callback.
This patch addresses all those concerns:
The deserialization code in webrtcsink is now made more clever and
robust by first having it pick a numerical type to coerce to when
deserializing arrays with numbers, then making sure it doesn't allow
mixed types in arrays (or arrays of arrays as those too must share
the same inner value type).
The frontend side simply sends over strings wrapped with a request
message envelope to the backend.
The request text area is only shown when remote control is enabled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1725>
Allows you to switch output between folders without having to state change to READY to close the current playlist.
Closes the current playlist immediately and starts a new one at the currently set location.
Should be used after changing the relevant location properties.
Makes use of the send-headers signal in cmafmux.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1692>
webrtcsink was starting the negotiation process on Ready and concurrently
moving the consumer pipeline to Playing, but when answering the remote
description was set so fast that input streams were connected (and the time
format set on appsrc) before the state change to Paused had completed.
This meant gst_base_src_start was happening after that and setting the format
back to bytes, the time segment that was next coming in then caused:
basesrc gstbasesrc.c:4255:gst_base_src_push_segment:<video_0> segment format mismatched, ignore
And the consumer pipeline errored out.
The same issue existed in theory when webrtcsink was creating the offer,
but was much harder to trigger as it required that the remote answer
came in before the state change to Paused had completed.
This commit fixes the issue by simply waiting for the state to have
changed to Paused before negotiating.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1730>
Posts a simple 'hls-segment-added' message with the segment location, start running time and duration.
With hlssink2, it was possible to catch 'splitmuxsink-fragment-closed', but since hlssink3 doesn't forward that message
(and hlscmafsink doesn't even use that mux), the new one was added to allow for listening for new fragments being added.
I extended the existing tests to check whether this message is posted correctly.
They theoretically only cover hlssink3, but hlscmafsink uses the same base class so it should be alright for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1677>
This is one example of how a consumer might send over custom upstream
event requests to the producer.
As webrtcsink will deserialize numbers in priority as integers, we need
a custom stringifying function to ensure members of the matrix array are
indeed serialized with the floating point.
An optional stringifier parameter is thus added to the
sendControlRequest API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1711>
.. and deprecate data channel navigation in favor of it.
A new property, "enable-data-channel-control" is exposed, when set to
TRUE a control data channel is offered, over which can be sent typed
upstream events.
This means further upstream events will be usable, for now only
navigation and custom upstream events are handled.
In addition, send response messages to notify the consumer of whether
its requests have been handled.
In the future this can also be extended to allow the consumer to send
queries, or seek events ..
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1711>
This makes the new payloaders closer to the old ones, and makes usage in
webrtcbin easier.
Also properly configure default PT of subclasses. Previously any PT that
was set for these subclasses via g_object_new() would be overridden by
the default one during construction.
Additionally, do SSRC collision handling while queueing output packets.
This is the more natural place as that's where the SSRC is actually
used, it happens potentially earlier and also allows to drain any
pending packets before the SSRC change in the caps.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/557
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1693>
This commit adds support for raw payloads such as L24 audio to `webrtcsink` &
`webrtcsrc`.
Most changes take place within the `Codec` helper structure:
* A `Codec` can now advertise a depayloader. This also ensures that a format
not only can be decoded when necessary, but it can also be depayloaded in the
first place.
* It is possible to declare raw `Codec`s, meaning that their caps are compatible
with a payloader and a depayloader without the need for an encoder and decoder.
* Previous accessor `has_decoder` was renamed as `can_be_received` to account
for codecs which can be handled by an available depayloader with or without
the need for a decoder.
* New codecs were added for the following formats:
* L24, L16, L8 audio.
* RAW video.
The `webrtc-precise-sync` examples were updated to demonstrate streaming of raw
audio or video.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1501>
The certificate chain was incorrectly being passed the private key instead
of certificate. With rustls 0.23.11 version, this error was being caught
and reported. As stated in the 0.23.11 release, it has a new feature
"API for determining whether a CertifiedKey's certificate and private key
matches: keys_match(). This is called from existing fallible functions
that accept a private key and certificate (for example, with_single_cert())
so these functions now detect this misconfiguration."
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1666>
This element allows wrapping an existing live "mpeg-ts source" (udpsrc,
srtsrc,...) and providing a clock based on the actual PCR of the stream.
Combined with `tsdemux ignore-pcr=True` downstream of it, this allows playing
back the content at the same rate as the (remote) provider **and** not modify
the original timestamps.
Co-authored-by: Sebastian Dröge <slomo@coaxion.net>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1640>
As suggested in the aws crate documentation, wrap SDK errors with
DisplayErrorContext so their Display implementation outputs the full
context.
Improve error display from "dispatch failure" to
"dispatch failure: io error: error trying to connect: dns error: failed
to lookup address information: Name or service not known: dns error:
failed to lookup address information: Name or service not known: failed
to lookup address information: Name or service not known
(DispatchFailure(DispatchFailure { source: ConnectorError { kind: Io,
source: hyper::Error(Connect, ConnectError(\"dns error\", Custom { kind:
Uncategorized, error: \"failed to lookup address information: Name or
service not known\" })), connection: Unknown } }))"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1638>
We now check if the peer actually supports Datagram and refusing to
proceed if it does not. Since the datagram size can actually change
over the lifetime of a connection according to variation in path MTU
estimate, also check buffer size before trying to send.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1613>
When pad a released, then we were removing the pad from an internal
list. If the pad was not already deactivated, the deactiviation would
attempt to look for the pad in that list and panic if it was not there.
Fix by delaying removal of the pad from the list until after pad
deactivation occurs.
Also includes test.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1618>
Multiple concurrent buffers produced by the jitterbuffer will be
combined into a single buffer list which will be sent downstream.
Events or queries that interrupt the buffer flow will cause a split in
the output buffer list.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1618>
We can use `is_some_and(...)` instead of `map_or(false, ...)`.
Also in a few places the factory was retrieved multiple times, one time
with unwrapping and another time with handling the `None` case
correctly. Instead of unwrapping, move code to handle the `None` case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1630>
We lost the environment variable checks during the addition of the
putobjectsink tests, which caused failures on MR branches.
It would be nicer to use some other mechanism to validate the tests can
run, so we don't count on only the environmnent, but for now this will
have to do.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1629>
They're not recommended by the spec to include in the RTP packets but it
is valid to include them. Pion is including them.
When parsing the size fields also make sure to only take that much of a
payload unit and to skip any trailing data (which should not exist in
the first place).
Pion is also currently storing multiple OBUs in a single payload unit,
which is not allowed by the spec but can be easily handled with this
code now.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/560
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1612>
It would be possible that there is no cancellable yet when unlock() is
called, then a new future is executed and it wouldn't have any
information that it is not supposed to run at all.
To solve this remember if cancellation should happen and reset this
later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1602>
It would be possible that there is no cancellable yet when unlock() is
called, then a new future is executed and it wouldn't have any
information that it is not supposed to run at all.
To solve this remember if unlock() was called and reset this in
unlock_stop().
Also implement actual unlocking in s3hlssink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1602>
It would be possible that there is no cancellable yet when unlock() is
called, then a new future is executed and it wouldn't have any
information that it is not supposed to run at all.
To solve this remember if unlock() was called and reset this in
unlock_stop().
Also actually implement unlock() / unlock_stop() for the sink, and don't
cancel in stop() as unlock() / unlock_stop() would've been called before
that already.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1602>
It would be possible that there is no cancellable yet when unlock() is
called, then a new future is executed and it wouldn't have any
information that it is not supposed to run at all.
To solve this remember if unlock() was called and reset this in
unlock_stop().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1602>
- generate a new session id for every new client
use the session id in the resource url
- remove the producer-peer-id property in the WhipServer signaler as it
is redundant to have producer id in a session having only one producer
- read the 'producer-peer-id' property on the signaller conditionally
if it exists else use the session id as producer id
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1339>
- Add a new structure Session
- manage each producer using a session
- avoid send EOS when a session terminates, instead keep running
waiting for any new producer to connect
- Maintain a bin element per session
- each session bin encapsulates webrtcbin and the decoder if needed
as well as the parser and filter if requested by the application
(through request-encoded-filter)
- this will be helpful to cleanup the session's respective elements
when the corresponding producer terminates the session
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1339>
There is now two elements, rtpsend and rtprecv that represent the two
halves of a rtpsession. This avoids the potential pipeline loop if two
peers are sending/receiving data towards each other. The two halves can
be connected by setting the rtp-id property on each element to the same
value and they will behave like a combined rtpbin-like element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1426>
Can receive and recevie one or more RTP sessions containing multiple
pt/ssrc combinations.
Demultiplexing happens internally instead of relying on separate
elements.
Co-Authored-By: François Laignel <francois@centricular.com>
Co-Authored-By: Mathieu Duponchelle <mathieu@centricular.com>
Co-Authored-By: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1426>
Add to awss3sink and awss3putobjectsink elements the following
paramerters which are set on the uploaded S3 objects:
* cache-control;
* content-encoding; and
* content-language
Bugfix: Set the content-type and content-disposition values in the S3
putobject call. Previously the params were defined on the element but
unused.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1585>
Unit tests specify a 0-based offset, so printing that plus the
random initial offset on failure is just needlessly confusing,
so subtract the initial offset when printing expected/actual
values. The real values are still printed as part of the assert.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1580>
