Sebastian Dröge
cef6fef079
fmp4: Add support for VP8
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1075 >
2023-02-04 13:48:37 +00:00
Sebastian Dröge
02ac4b3b04
mp4: Add support for VP8
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1075 >
2023-02-04 13:48:37 +00:00
Sebastian Dröge
ecb26a0b16
fmp4mux: Fix a couple of assertions by handling these cases cleaner
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1071 >
2023-02-01 14:57:00 +02:00
Sebastian Dröge
1998ecab45
fmp4mux: Refactor and clean up code
...
Split many longer functions into multiple functions and simplify various
parts. Overall this is functionally still the same as before.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1068 >
2023-01-30 14:41:33 +00:00
Sebastian Dröge
2a3d962dc5
fmp4mux: Add support for sub-fragments / chunking
...
Allow outputting sub-fragments (chunks in CMAF terms) that are shorter
than the fragment duration and don't usually start on a keyframe. By
this the buffering requirements of the element is reduced to one chunk
duration, as is the latency.
This is used for formats like low-latency / LL-HLS and DASH.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1059 >
2023-01-27 19:28:27 +00:00
Guillaume Desmottes
abe4efc4a2
fmp4mux: add 'offset-to-zero' property
...
Add it only to 'isofmp4mux', the onvif variant already does this and
CMAF and DASH are always single-stream so you rely on inter-container
synchronization via the running-time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1063 >
2023-01-25 12:29:30 +00:00
Sebastian Dröge
3b4c48d9f5
Fix various new clippy warnings
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1062 >
2023-01-25 10:31:19 +02:00
Sebastian Dröge
ee8249eec7
fmp4mux: Don't write the first sample flags into any trun but the first
...
The flags are based on the first sample of this fragment so writing it
into any trun but the first is not very useful.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1060 >
2023-01-24 19:54:12 +02:00
Sebastian Dröge
1ceaea844a
fmp4mux: Fix decision whether per-sample flags are needed in the trun
...
Previously it would never use per-sample flags if any later sample
needed different flags than the first two.
Also comment the code a bit better.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1060 >
2023-01-24 19:54:11 +02:00
Sebastian Dröge
458b2386ed
Update for glib API changes
2023-01-21 18:13:48 +02:00
Sebastian Dröge
6132788b02
Update for caps/structure-related string API changes
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1048 >
2023-01-15 22:58:44 +02:00
Sebastian Dröge
e9bbf804ba
fmp4mux: Remove obsolete comment
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1037 >
2023-01-06 14:52:56 +02:00
Sebastian Dröge
af9d9c0a5c
fmp4: Fix compilation after glib::List
API changes
2023-01-02 19:22:51 +02:00
Johan Bjäreholt
71c268da14
fmp4mux: Only push fragment_offset if write_mfra is true
...
This is done so that the fragment_offset vector does not infinitely
build up when write_mfra is disabled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1023 >
2022-12-22 10:31:27 +01:00
Sebastian Dröge
13b6f8fad4
fmp4mux: Skip gap buffers earlier to consider them for the sample durations and fragment start durations
...
Otherwise dropping the gap buffers would offset the timestamps of
following samples.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1016 >
2022-12-16 17:43:44 +02:00
Sebastian Dröge
e344585d99
mp4mux: Adjust durations and possibly stream start time on encountering a gap buffer
...
If there was a previous sample in this stream then its duration needs to
be extended by the gap position, and if there was none then the start
time of the whole stream has to be shifted by the duration.
Not doing so causes timestamps to be offset wrongly by the duration of
the gap.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1015 >
2022-12-16 13:24:21 +02:00
Sebastian Dröge
9307acf7fa
mp4mux: Fix edit list shift for streams with initial DTS smaller earliest PTS but initial DTS positive
...
This would be a stream where the initial DTS is negative if the initial
PTS was zero, but it is offset so the initial DTS became positive now.
The edit list shift has to happen exactly the same way though.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1014 >
2022-12-15 18:52:47 +02:00
Sebastian Dröge
ed429d570e
mp4mux: Don't write gap edit lists if their duration would be zero
...
The track might start later than the earliest track by less than one
timescale units, in which case writing an empty gap edit list would be
useless and confusing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1014 >
2022-12-15 18:45:19 +02:00
Sebastian Dröge
f8024f072f
mp4mux: Don't write empty chunks at the end if the last buffer of a stream started a new chunk and happened to be a from a gap event
...
Empty chunks are not valid in MP4.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1014 >
2022-12-15 17:44:03 +02:00
Sebastian Dröge
3f904553ea
Fix various new clippy warnings
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1011 >
2022-12-13 11:43:16 +02:00
Sebastian Dröge
3172bcd095
fmp4mux: Crank clock for the first fragment in more tests
...
Due to how aggregator works, it depends on how buffers are pulled
whether aggregate() is called again or it is waiting for a timeout or EOS:
works:
- pad 1: 4 buffers, pad 2: 4 buffers
- aggregate ready: take all 4/4 buffers
- pad 1: 1 buffers, pad 2: 1 buffer
- aggregate ready: take all 1/1 buffers
waits:
- pad 1: 5 buffers, pad 2: 4 buffers
- aggregate ready: take all 5/4 buffers
- pad 1: 0 buffers, pad 2: 1 buffer
- aggregate not ready: waiting for timeout or EOS
Also don't manually set the clock time as that's unnecessary.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/274
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/998 >
2022-12-03 18:21:19 +00:00
Jordan Petridis
a84eeeb240
mux/{mp4, fmp4}: Hard depend on feature v1_18
...
Else --no-default-features was failing to compile.
v1_18 is needed to for the aggregator code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/588 >
2022-11-29 21:06:12 +02:00
Sebastian Dröge
1fcbc346bc
fmp4mux: examples: Avoid unnecessary caps copies
2022-11-22 10:39:47 +02:00
Sebastian Dröge
6b3bb2c747
fmp4mux: Handle EOS correctly if it happens before a fragment start time was determined
...
Whatever earliest time we have at that point is going to be the start
time.
Also handle the case correctly where all inputs are EOS before any
buffers were received at all.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/270
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/982 >
2022-11-19 19:24:43 +02:00
Sebastian Dröge
e3f645af19
fmp4mux: Don't overflow negative composition offset calculation
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/982 >
2022-11-19 19:24:04 +02:00
Sebastian Dröge
ae4b49c668
mp4mux: For video with N/1001 framerates use N as timescale
...
See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3049
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/981 >
2022-11-18 16:10:10 +02:00
Sebastian Dröge
fd910cb828
fmp4mux: For video with N/1001 framerates use N as timescale
...
See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3049
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/981 >
2022-11-18 16:07:11 +02:00
Sebastian Dröge
c553ac7402
fmp4mux: Re-work buffer dequeueing and calculations of timestamps
...
Especially simplify calculation of ONVIF UTC times. As a side-effect
this reduces the number of times the running times of a buffer are
calculated, and also causes streams to be interleaved correctly in ONVIF
mode if there is a non-constant UTC-to-running-time difference.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/979 >
2022-11-18 15:00:00 +02:00
Sebastian Dröge
3003987c3a
mp4mux: Make use of i64::TryFrom<gst::Signed<u64>>
impl
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/979 >
2022-11-18 12:26:18 +02:00
Sebastian Dröge
9903d536b5
mp4mux: Factor out running time to UTC time calculation into a function
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/979 >
2022-11-18 12:21:25 +02:00
Sebastian Dröge
aa7fd34097
mp4mux: Remove unnecessary error case of negative PTS when doing the ONVIF UTC time calculations
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/979 >
2022-11-18 12:21:25 +02:00
Sebastian Dröge
4d310434ab
mp4mux: Skip gap buffers instead of writing empty samples
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/974 >
2022-11-10 12:59:53 +02:00
Sebastian Dröge
2b4fd40d62
mp4: Add ONVIF non-fragmented MP4 muxer
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/974 >
2022-11-10 12:59:53 +02:00
Sebastian Dröge
97bb327b2a
mp4: Remove unneeded cast in tests
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/974 >
2022-11-10 12:44:46 +02:00
Sebastian Dröge
10d8cc21e6
mp4: Update to url 2
2022-11-09 09:15:50 +02:00
Sebastian Dröge
c2f403f998
gst-plugin-mp4: Add new MP4 plugin with a non-fragmented MP4 muxer
2022-11-08 19:08:47 +02:00
Sebastian Dröge
f062b7cf0d
fmp4mux: Make media/trak timescales configurable
...
And refactor a bit of code for easier extensibility.
2022-11-07 18:06:29 +00:00
Sebastian Dröge
7ac29827d2
fmp4mux: Don't allow VP9 for CMAF
...
This would require setting the correct compatible band for VP9 in CMAF,
which is not implemented yet.
2022-11-03 16:53:01 +02:00
Sebastian Dröge
6706f3a4b4
fmp4mux: Add initial Opus support
...
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/239
2022-11-03 16:53:01 +02:00
Sebastian Dröge
a8250abbf1
Fix various new clippy warnings
2022-11-01 10:27:48 +02:00
Sebastian Dröge
31d4ba2eae
fmp4mux: For VP9, write resolution into the tkhd and include a stss box to signal that not all frames are sync samples
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/957 >
2022-10-31 15:20:19 +02:00
Sebastian Dröge
7106b0484d
fmp4mux: Remove unused uuid dependency
2022-10-28 12:45:42 +03:00
Sebastian Dröge
938f4e4f1c
fmp4mux: Clip negative PTS to zero/last PTS instead of erroring out
...
This can happen at the beginning of a stream if upstream is
rtpjitterbuffer and it has problems figuring out timestamps in the
beginning due to resetting / skew.
2022-10-27 14:47:16 +03:00
Sebastian Dröge
627bf756b1
fmp4mux: Send force-keyunit events for now if the ideal position has already passed
2022-10-27 12:53:09 +03:00
Sebastian Dröge
a56435801d
fmp4mux: Add debug log when writing the mfra box
2022-10-26 17:22:20 +00:00
Sebastian Dröge
27fac33c44
fmp4mux: Reset timing infos to None if a stream only contained gap events for a whole fragment
2022-10-26 17:22:20 +00:00
Sebastian Dröge
cab4cd3b8c
fmp4mux: If a stream is longer than the main stream at EOS, simply include all of its buffers in the last fragment nonetheless
2022-10-26 17:22:20 +00:00
Matthew Waters
d067fb2ec8
fmp4mux: don't require dts for predictive-only formats like vp9
2022-10-26 11:42:13 +00:00
Matthew Waters
8c8384c711
fmp4: add support for muxing VP9 streams in cmaf, dash and iso fmp4
...
As specified in https://www.webmproject.org/vp9/mp4/
2022-10-25 18:33:42 +11:00
Sebastian Dröge
f2223cf2cb
Update versions to 0.10.0-alpha.1
2022-10-24 19:31:19 +03:00
Sebastian Dröge
9a68f6e221
Move from imp.instance()
to imp.obj()
...
It's doing the same thing and is shorter.
2022-10-23 23:08:46 +03:00
François Laignel
86776be58c
Remove &
for obj
in log macros
...
This is no longer necessary.
See https://gitlab.freedesktop.org/gstreamer/gstreamer-rs/-/merge_requests/1137
2022-10-23 21:22:31 +02:00
Sebastian Dröge
f045099fc1
Fix GObject type names, GStreamer debug category names and element factory names
...
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/198
2022-10-23 20:46:08 +03:00
Sebastian Dröge
211cd095d6
Add new mux subdirectory for container formats
...
Contains the (incomplete) flavors FLV demuxer and the fragmented MP4
muxer for now.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/173
2022-10-23 20:25:08 +03:00