mirror of
https://git.deuxfleurs.fr/Deuxfleurs/garage.git
synced 2024-11-26 01:51:00 +00:00
Section on recovering from failures
This commit is contained in:
parent
9cb9945131
commit
55e4a93bad
2 changed files with 99 additions and 0 deletions
|
@ -14,6 +14,7 @@
|
|||
- [Host a website](./cookbook/website.md)
|
||||
- [Integrate as a media backend]()
|
||||
- [Operate a cluster]()
|
||||
- [Recovering from failures](./cookbook/recovering.md)
|
||||
|
||||
- [Reference Manual](./reference_manual/index.md)
|
||||
- [Garage CLI]()
|
||||
|
|
98
doc/book/src/cookbook/recovering.md
Normal file
98
doc/book/src/cookbook/recovering.md
Normal file
|
@ -0,0 +1,98 @@
|
|||
# Recovering from failures
|
||||
|
||||
Garage is meant to work on old, second-hand hardware.
|
||||
In particular, this makes it likely that some of your drives will fail, and some manual intervention will be needed.
|
||||
Fear not! For Garage is fully equipped to handle drive failures, in most common cases.
|
||||
|
||||
## A note on availability of Garage
|
||||
|
||||
With nodes dispersed in 3 datacenters or more, here are the guarantees Garage provides with the default replication strategy (3 copies of all data, which is the recommended value):
|
||||
|
||||
- The cluster remains fully functionnal as long as the machines that fail are in only one datacenter. This includes a whole datacenter going down due to power/Internet outage.
|
||||
- No data is lost as long as the machines that fail are in at most two datacenters.
|
||||
|
||||
Of course this only works if your Garage nodes are correctly configured to be aware of the datacenter in which they are located.
|
||||
Make sure this is the case using `garage status` to check on the state of your cluster's configuration.
|
||||
|
||||
|
||||
## First option: removing a node
|
||||
|
||||
If you don't have spare parts (HDD, SDD) to replace the failed component, and if there are enough remaining nodes in your cluster
|
||||
(at least 3), you can simply remove the failed node from Garage's configuration.
|
||||
Note that if you **do** intend to replace the failed parts by new ones, using this method followed by adding back the node is **not recommended** (although it should work),
|
||||
and you should instead use one of the methods detailed in the next sections.
|
||||
|
||||
Removing a node is done with the following command:
|
||||
|
||||
```
|
||||
garage node remove --yes <node_id>
|
||||
```
|
||||
|
||||
(you can get the `node_id` of the failed node by running `garage status`)
|
||||
|
||||
This will repartition the data and ensure that 3 copies of everything are present on the nodes that remain available.
|
||||
|
||||
|
||||
|
||||
## Replacement scenario 1: only data is lost, metadata is fine
|
||||
|
||||
The recommended deployment for Garage uses an SSD to store metadata, and an HDD to store blocks of data.
|
||||
In the case where only a single HDD crashes, the blocks of data are lost but the metadata is still fine.
|
||||
|
||||
This is very easy to recover by setting up a new HDD to replace the failed one.
|
||||
The node does not need to be fully replaced and the configuration doesn't need to change.
|
||||
We just need to tell Garage to get back all the data blocks and store them on the new HDD.
|
||||
|
||||
First, set up a new HDD to store Garage's data directory on the failed node, and restart Garage using
|
||||
the existing configuration. Then, run:
|
||||
|
||||
```
|
||||
garage repair -a --yes blocks
|
||||
```
|
||||
|
||||
This will re-synchronize blocks of data that are missing to the new HDD, reading them from copies located on other nodes.
|
||||
|
||||
You can check on the advancement of this process by doing the following command:
|
||||
|
||||
```
|
||||
garage stats -a
|
||||
```
|
||||
|
||||
Look out for the following output:
|
||||
|
||||
```
|
||||
Block manager stats:
|
||||
resync queue length: 26541
|
||||
```
|
||||
|
||||
This indicates that one of the Garage node is in the process of retrieving missing data from other nodes.
|
||||
This number decreases to zero when the node is fully synchronized.
|
||||
|
||||
|
||||
## Replacement scenario 2: metadata (and possibly data) is lost
|
||||
|
||||
This scenario covers the case where a full node fails, i.e. both the metadata directory and
|
||||
the data directory are lost, as well as the case where only the metadata directory is lost.
|
||||
|
||||
To replace the lost node, we will start from an empty metadata directory, which means
|
||||
Garage will generate a new node ID for the replacement node.
|
||||
We will thus need to remove the previous node ID from Garage's configuration and replace it by the ID of the new node.
|
||||
|
||||
If your data directory is stored on a separate drive and is still fine, you can keep it, but it is not necessary to do so.
|
||||
In all cases, the data will be rebalanced and the replacement node will not store the same pieces of data
|
||||
as were originally stored on the one that failed. So if you keep the data files, the rebalancing
|
||||
might be faster but most of the pieces will be deleted anyway from the disk and replaced by other ones.
|
||||
|
||||
First, set up a new drive to store the metadata directory for the replacement node (a SSD is recommended),
|
||||
and for the data directory if necessary. You can then start Garage on the new node.
|
||||
The restarted node should generate a new node ID, and it should be shown as `NOT CONFIGURED` in `garage status`.
|
||||
The ID of the lost node should be shown in `garage status` in the section for disconnected/unavailable nodes.
|
||||
|
||||
Then, replace the broken node by the new one, using:
|
||||
|
||||
```
|
||||
garage node add --replace <old_node_id> -c <capacity> -d <datacenter> -t <node_tag> <new_node_id>
|
||||
```
|
||||
|
||||
Garage will then start synchronizing all required data on the new node.
|
||||
This process can be monitored using the `garage stats -a` command.
|
Loading…
Reference in a new issue