Commit graph

4546 commits

Author SHA1 Message Date
Gergely Nagy
d4fc0d2c5a
[GITEA] Allow changing the email address before activation
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.

They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.

To remedy this issue, lets allow changing the email address for logged
in, but not activated users.

This fixes gitea#17785.

Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)

[GITEA] Allow changing the email address before activation (squash) cache is always active

This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.

See e7cb8da2a8 * Always enable caches (#28527)

(cherry picked from commit 43ded8ee30)

Rate limit pre-activation email change separately

Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.

With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.

The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.

The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.

Fixes #2040.

Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
(cherry picked from commit 03989418a7)
(cherry picked from commit f50e0dfe5e)
(cherry picked from commit cad9184a36)
(cherry picked from commit e2da5d7fe1)
(cherry picked from commit 3a80534d4d)
2024-02-05 16:09:41 +01:00
Gusted
533c87da65
[GITEA] Make HTTPS schema default for Swagger
- Switch the supported schemas for the Swagger API around, such that
https is the first one listed. This ensures that when the Swagger API is
used it will default to the https schema, which is likely the schema you
want to use in the majority of the cases.
- Resolves #1895

BREAKING CHANGE NOTICE:
If you are using the Swagger API JSON directly to communicate with the
Forgejo API, the library you are using may be using the first schema
defined in the JSON file (e.g. https://code.forgejo.org/swagger.v1.json)
to construct the request url, this used to be `http` but has now changed
to `https`. This can cause failures if you want to send the swagger
request over `http` (and there is no HTTPS redirection configured).

(cherry picked from commit 81e5f43886)
(cherry picked from commit d847469ea2)
(cherry picked from commit 96e75e1d5c)
(cherry picked from commit 65baa64261)
(cherry picked from commit cd3e0a74e6)
(cherry picked from commit a3127e90b2)
(cherry picked from commit 2b22272dc5)
(cherry picked from commit 7363790592)
(cherry picked from commit 432b9a4451)
2024-02-05 16:09:41 +01:00
Gusted
75ce1e2ac1
[GITEA] Allow user to select email for file operations in Web UI
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281

(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
(cherry picked from commit 079b995d49)
(cherry picked from commit 6952ea6ee3)
(cherry picked from commit 6c7d5a5d14)
(cherry picked from commit 49c39f0ed5)
(cherry picked from commit a8f9727388)
2024-02-05 16:09:41 +01:00
Gusted
7022378173
[GITEA] Add cancel button to wiki
- Add a cancel button to the Edit and New wiki pages.
- Resolves https://codeberg.org/forgejo/forgejo/issues/705

(cherry picked from commit 3284f690ea)
(cherry picked from commit 9f8bf83b0e)
(cherry picked from commit bfd03a9f30)
(cherry picked from commit 6b5d5e0cf7)
(cherry picked from commit 3ef3ec0d82)
(cherry picked from commit 5ae55325ef)
(cherry picked from commit f0894ae003)
(cherry picked from commit 18564b26f6)
(cherry picked from commit 06c130fd1f)
(cherry picked from commit c7e595f903)
(cherry picked from commit 72b2e7e0d4)
2024-02-05 16:09:40 +01:00
rome-user
ee70e910df
[GITEA] fix indentation in Maven package install instructions
The installation instructions of a Maven package places the `url` child
of the `repository` node in an extra indentation level. This indentation
is unnecesary since both the `id` and `url` nodes are direct children of
the `repository` node.

This commit removes the unnecessary indentation.

Refs: https://codeberg.org/forgejo/forgejo/pulls/1534

(cherry picked from commit 82f0ddad7b)
(cherry picked from commit 905e546549)
(cherry picked from commit 4e58ab82b7)
(cherry picked from commit 2f207e7deb)
(cherry picked from commit 3b8cc8ad2c)
(cherry picked from commit ca8565450c)
(cherry picked from commit df5ed97ed0)
(cherry picked from commit fc1e529894)
(cherry picked from commit ef8810c09d)
(cherry picked from commit a2d1459c4d)
(cherry picked from commit 30e0d7bff0)
(cherry picked from commit ccb9ed98b9)
(cherry picked from commit 3782794fb4)
(cherry picked from commit 9e7d5b5de9)
(cherry picked from commit 50687eaebe)
(cherry picked from commit 28ae93f18e)
(cherry picked from commit e59f467284)
(cherry picked from commit 5e24444bfa)
2024-02-05 16:09:40 +01:00
Gusted
a5b1c1b0b3
[GITEA] Detect file rename and show in history
- Add a indication to the file history if the file has been renamed,
this indication contains a link to browse the history of the file
further.
- Added unit testing.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1279

(cherry picked from commit 72c297521b)
(cherry picked from commit 283f964894)

Conflicts:
	options/locale/locale_en-US.ini
	https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 7c30af7fde)
(cherry picked from commit f3be6eb269)
(cherry picked from commit 78e1755b94)
(cherry picked from commit 73799479e0)
(cherry picked from commit 938359b941)
(cherry picked from commit b168a9c081)

[GITEA] Detect file rename and show in history (squash) ctx.Locale

(cherry picked from commit 40447752ff)
(cherry picked from commit ea23594cdb)
(cherry picked from commit cdc473850c)
(cherry picked from commit 86e6641c29)
(cherry picked from commit 2757de586b)
(cherry picked from commit def4ae32dd)
(cherry picked from commit 6dada09329)
(cherry picked from commit 5d6d527251)

Conflicts:
	tests/integration/repo_test.go
	https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit d3c1bce7db)
(cherry picked from commit 04bcb22d5c)
(cherry picked from commit e16241fd99)
(cherry picked from commit 8e2beb3ed5)
2024-02-05 16:09:40 +01:00
Gusted
23e4c19d42
[GITEA] Tidy up archive modal
- Make it consistent with the other modals of the dangerous actions.

(cherry picked from commit 576d7ec759)
(cherry picked from commit 8b1225f974)
(cherry picked from commit c2c47972ee)
(cherry picked from commit eec301806b)
(cherry picked from commit 6b5e728f0a)
(cherry picked from commit 3681691e65)
(cherry picked from commit e39dfa550d)
(cherry picked from commit 0c78c8c5ac)
(cherry picked from commit 661cf72db0)

[GITEA] Tidy up archive modal (squash) ctx.Locale

(cherry picked from commit 4bb6ee71f0)
(cherry picked from commit ddafd8fbe3)
(cherry picked from commit 9467a6915f)
(cherry picked from commit e632b10380)
(cherry picked from commit 6609d07591)
(cherry picked from commit c130b8a09a)
(cherry picked from commit 1080de5754)
(cherry picked from commit a9813744d4)
(cherry picked from commit 93232f410a)
(cherry picked from commit 1bf1c6b6c1)
(cherry picked from commit cb703ac292)
(cherry picked from commit ac48797029)
2024-02-05 16:09:40 +01:00
Aravinth Manivannan
2d06901a18
[GITEA] notifies admins on new user registration
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel

closes: https://codeberg.org/forgejo/forgejo/issues/480

Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828b)
(cherry picked from commit 6487efcb9d)

Conflicts:
	modules/notification/base/notifier.go
	modules/notification/base/null.go
	modules/notification/notification.go
	https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5)

Conflicts:
	services/notify/notifier.go
	services/notify/notify.go
	services/notify/null.go
	https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d997011)
(cherry picked from commit 435a54f140)
(cherry picked from commit 8ec7b3e448)

[GITEA] notifies admins on new user registration (squash) performance bottleneck

Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff)
(cherry picked from commit 19f295c16b)
(cherry picked from commit 3367dcb2cf)

[GITEA] notifies admins on new user registration (squash) cosmetic changes

Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040)
(cherry picked from commit de5bb2a224)
(cherry picked from commit 8f8e52f31a)
(cherry picked from commit e0d5130312)
(cherry picked from commit f1288d6d9b)
(cherry picked from commit 1db4736fd7)
(cherry picked from commit e8dcbb6cd6)
(cherry picked from commit 09625d6476)

[GITEA] notifies admins on new user registration (squash) ctx.Locale

(cherry picked from commit dab7212fad)
(cherry picked from commit 9b7bbae8c4)
(cherry picked from commit f750b71d3d)
(cherry picked from commit f79af36679)
(cherry picked from commit e76eee334e)

[GITEA] notifies admins on new user registration (squash) fix locale

(cherry picked from commit 54cd100d8d)
(cherry picked from commit 053dbd3d50)

[GITEA] notifies admins on new user registration (squash) fix URL

1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.

New email looks like this:

<details><summary>Please click to expand</summary>

```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8

User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------

* Created: 2023-12-13 19:36:50 +05:30

Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8

<!DOCTYPE html>
<html>
<head>
	<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
	<title>New user realaravinth just signed up</title>

	<style>
		blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
		.footer { font-size:small; color:#666;}
	</style>

</head>

<body>
	<ul>
		<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
		<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
 +05:30</relative-time></li>
	</ul>
	<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>

--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```

</details>

fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a)
(cherry picked from commit d48b84f623)

Conflicts:
	routers/web/auth/auth.go
	https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125cc)
(cherry picked from commit 367374ecc3)

Conflicts:
	models/user/user_test.go
	https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa4)
(cherry picked from commit 7f12610ff6)

[GITEA] notifies admins on new user registration (squash) DeleteByID

trivial conflict because of
   778ad795fd Refactor deletion (#28610)

(cherry picked from commit 05682614e5)
(cherry picked from commit 64bd374803)
(cherry picked from commit 63d086f666)
(cherry picked from commit 3cd48ef4d5)

Conflicts:
	options/locale/locale_en-US.ini
	https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 6578ec4ed6)

Conflicts:
	routers/web/auth/auth.go
	https://codeberg.org/forgejo/forgejo/pulls/2300
2024-02-05 16:09:28 +01:00
Gusted
23d32eb493
[GITEA] Improve HTML title on repositories
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276

(cherry picked from commit ff9a6a2cda)
(cherry picked from commit 76dffc8621)
(cherry picked from commit ff0615b9d0)
(cherry picked from commit 8712eaa394)
(cherry picked from commit 0c11587582)
(cherry picked from commit 3cbd9fb792)

Conflicts:
	tests/integration/repo_test.go
	https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9)

Conflicts:
	models/fixtures/release.yml
	https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534c)
(cherry picked from commit d706d9e222)
(cherry picked from commit 6d46261a3f)
(cherry picked from commit f864d18ad3)
(cherry picked from commit 80f8620d0d)

[GITEA] Improve HTML title on repositories (squash) do not double escape

(cherry picked from commit 22882fe25c)
(cherry picked from commit 63e99df3d1)
(cherry picked from commit b65d777bc7)
(cherry picked from commit 2961f4f632)
(cherry picked from commit f7f723628c)
(cherry picked from commit 9ed7915826)
(cherry picked from commit 8b9ead4608)
(cherry picked from commit 50eeaf1fbc)
(cherry picked from commit ee6f32820e)
(cherry picked from commit bf337bed35)
(cherry picked from commit 6be9501ec0)
(cherry picked from commit b39860570d)
(cherry picked from commit 3f30f486d5)
(cherry picked from commit 5680ecdbe9)
(cherry picked from commit da6a19ad16)
(cherry picked from commit 5462493a77)
(cherry picked from commit 530fe57dde)
(cherry picked from commit f174f35644)

Conflicts:
	models/fixtures/repository.yml
	https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59)
(cherry picked from commit 6e3c0be555)
2024-02-05 16:05:50 +01:00
Panagiotis "Ivory" Vasilopoulos
ee26f86bfc
[GITEA] add option for banning dots in usernames
Refs: https://codeberg.org/forgejo/forgejo/pulls/676

Author:    Panagiotis "Ivory" Vasilopoulos <git@n0toose.net>
Date:      Mon Jun 12 13:57:01 2023 +0200

Co-authored-by: Gusted <postmaster@gusted.xyz>
(cherry picked from commit fabdda5c6e)
(cherry picked from commit d2c7f45621)
(cherry picked from commit dfdbaba3d6)
(cherry picked from commit a3cda092b8)
(cherry picked from commit f0fdb5905c)
(cherry picked from commit 9697e48c1f)
(cherry picked from commit 46e31009a8)
(cherry picked from commit 5bb2c54b6f)
(cherry picked from commit 682f9d24e1)
(cherry picked from commit 1863481005)
(cherry picked from commit 4f1b7c4ddb)
(cherry picked from commit 6afe70bbf1)
(cherry picked from commit 5cec1d9c2d)

Conflicts:
	templates/admin/config.tmpl
	https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit de2d172473)
(cherry picked from commit 37a3172dd9)
(cherry picked from commit 92dfca0c5a)
(cherry picked from commit a713d59b0c)
(cherry picked from commit e7bd71a618)
(cherry picked from commit 69f3e952c4)
(cherry picked from commit 83fbb7b566)
(cherry picked from commit 3196605fa9)
(cherry picked from commit e37eb8de9c)
(cherry picked from commit 8c99f59e48)
(cherry picked from commit 74aa1ac66f)
(cherry picked from commit 622440b3bd)
(cherry picked from commit 2c1ec90984)
(cherry picked from commit 24d57152e0)
(cherry picked from commit 071e9013f3)
(cherry picked from commit 27fbb726fa)
(cherry picked from commit 29eddd86ea)
(cherry picked from commit 133dc72fab)
2024-02-05 16:05:50 +01:00
Gusted
c2053dd076
[SHARED] make confirmation clearer for dangerous actions
[GITEA] Fix cancelled migration deletion modal

- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.

(cherry picked from commit c38dbd6f88)
(cherry picked from commit 7c07592d01)
(cherry picked from commit 78637af2b6)

[SHARED] make confirmation clearer for dangerous actions

- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.

(cherry picked from commit bf679b24dd)
(cherry picked from commit 1963085dd9)
(cherry picked from commit fb94095d19)
(cherry picked from commit e1d1e46afe)
(cherry picked from commit 93993029e4)
(cherry picked from commit df3b058179)
(cherry picked from commit 8ccc6b9cba)
(cherry picked from commit 9fbe28fca3)
(cherry picked from commit 4ef2be6dc7)

https://codeberg.org/forgejo/forgejo/pulls/1873
  Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
  avoid conflicts.
(cherry picked from commit 83cae67aa3)
(cherry picked from commit 447009ff56)
(cherry picked from commit 72c0a6150a)
(cherry picked from commit 8ee9c070b9)
(cherry picked from commit 89aba06403)
(cherry picked from commit 798407599f)
(cherry picked from commit 41c9a2606b)
(cherry picked from commit a57b214e36)
(cherry picked from commit fd287a9134)
2024-02-05 15:07:49 +01:00
Earl Warren
c7a389f2b2
[FEAT] allow setting the update date on issues and comments
This field adds the possibility to set the update date when modifying
an issue through the API.

A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.

That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.

A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.

(cherry picked from commit c524d33402)

Add a SetIssueUpdateDate() function in services/issue.go

That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.

(cherry picked from commit f061caa655)

Add an updated_at field to the API calls related to Issue's Labels.

The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.

(cherry picked from commit ea36cf80f5)

Add an updated_at field to the API call for issue's attachment creation

The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.

(cherry picked from commit 96150971ca)

Checking Issue changes, with and without providing an updated_at date

Those unit tests are added:

- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate

- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate

- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate

(cherry picked from commit 4926a5d7a2)

Add an updated_at field to the API call for issue's comment creation

The update date is used as the comment creation date, and is applied to
the issue as the update creation date.

(cherry picked from commit 76c8faecdc)

Add an updated_at field to the API call for issue's comment edition

The update date is used as the comment update date, and is applied to
the issue as an update date.

(cherry picked from commit cf787ad7fd)

Add an updated_at field to the API call for comment's attachment creation

The update date is applied to the comment, and is set as the asset
creation date.

(cherry picked from commit 1e4ff424d3)

Checking Comment changes, with and without providing an updated_at date

Those unit tests are added:

- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate

- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate

- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate

(cherry picked from commit da932152f1)

Pettier code to set the update time of comments

Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)

XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.

(cherry picked from commit 1f6a42808d)

Issue edition: Keep the max of the milestone and issue update dates.

When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.

This ensures that a milestone's update date is the max of all issue's
update dates.

(cherry picked from commit 8f22ea182e)

Rewrite the 'AutoDate' tests using subtests

Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.

The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate

(cherry picked from commit 961fd13c55)
(cherry picked from commit d52f4eea44)
(cherry picked from commit 3540ea2a43)

Conflicts:
	services/issue/issue.go
	https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade00)

Conflicts:
	routers/api/v1/repo/issue_label.go
	https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6)
(cherry picked from commit 2030f3b965)
(cherry picked from commit f02aeb7698)

Conflicts:
	routers/api/v1/repo/issue_attachment.go
	routers/api/v1/repo/issue_comment_attachment.go
	https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35)
(cherry picked from commit 8424d0ab3d)
(cherry picked from commit 5cc62caec7)
(cherry picked from commit d6300d5dcd)

[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)

[this is a follow-up to PR #764]

When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.

-----

Comment:

While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...

I'll try to write a functional test, base on models/issues/issue_xref_test.go

Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63)
(cherry picked from commit 5110476ee9)
(cherry picked from commit 77ba6be1da)
(cherry picked from commit 9c8337b5c4)
(cherry picked from commit 1d689eb686)
(cherry picked from commit 511c519c87)
(cherry picked from commit 2f0b4a8f61)
(cherry picked from commit fdd4da111c)

[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param

See https://codeberg.org/forgejo/forgejo/commit/33439b733a

(cherry picked from commit c5139a75b9)
(cherry picked from commit c7b572c35d)
(cherry picked from commit aec7503ff6)
(cherry picked from commit 87c65f2a49)
(cherry picked from commit bd47ee33c2)
(cherry picked from commit f3dbd90a74)
2024-02-05 14:44:33 +01:00
Earl Warren
c3985f05e8
[API] Forgejo API /api/forgejo/v1
(cherry picked from commit 20b5669269)
(cherry picked from commit 1574643a6a)

Update semantic version according to specification

(cherry picked from commit 22510f4130)

Mise à jour de 'Makefile'

(cherry picked from commit c3d85d8409)
(cherry picked from commit 5ea2309851)
(cherry picked from commit ec5217b9d1)
(cherry picked from commit 14f08e364b)
(cherry picked from commit b4465c67b8)

[API] [SEMVER] replace number with version

(cherry picked from commit fba48e6497)
(cherry picked from commit 532ec5d878)

[API] [SEMVER] [v1.20] less is replaced by css

(cherry picked from commit 01ca3a4f42)
(cherry picked from commit 1d928c3ab2)
(cherry picked from commit a39dc804cd)

Conflicts:
	webpack.config.js
(cherry picked from commit adc68578b3)
(cherry picked from commit 9b8d98475f)
(cherry picked from commit 2516103974)
(cherry picked from commit 18e6287963)
(cherry picked from commit e9694e67ab)
(cherry picked from commit a9763edaf0)
(cherry picked from commit e2b550f4fb)
(cherry picked from commit 2edac36701)

[API] Forgejo API /api/forgejo/v1 (squash)

Update semver as v1.20 is entering release candidate mode

(cherry picked from commit 4995098ec3)
(cherry picked from commit 578ccfdd27)
(cherry picked from commit 1bf6ac0952)
(cherry picked from commit 2fe16b2bfe)
(cherry picked from commit 7cd9d027ee)
(cherry picked from commit eaed4be2ae)
(cherry picked from commit cc94f3115f)
(cherry picked from commit d7a77e35cc)
(cherry picked from commit cd8eb68ab7)
(cherry picked from commit 68487ac95f)
(cherry picked from commit 616dceb565)
(cherry picked from commit 545fe5975b)
(cherry picked from commit c042cf8eda)
(cherry picked from commit ae5e5a7468)
(cherry picked from commit 8034ef5fa2)
(cherry picked from commit aaf0293034)
(cherry picked from commit daafa8ce58)
(cherry picked from commit 7ca3681d3e)
(cherry picked from commit 39f72cba71)
(cherry picked from commit 60a5917130)
(cherry picked from commit 4853bd9e16)

[API] Move forgejo api file (squash)

- Move the file to accommodate faa28b5a44

(cherry picked from commit bce89351d2)
(cherry picked from commit 11ae7f6e85)
(cherry picked from commit 25e96cfcb2)
(cherry picked from commit 6d8d19b391)
(cherry picked from commit 5afc5c454b)
(cherry picked from commit 86d07b4c24)
(cherry picked from commit e54d869fda)
(cherry picked from commit ab31ef1bba)
(cherry picked from commit 511cbca2f3)
(cherry picked from commit 333916fea8)
(cherry picked from commit 3802bcd7c9)
(cherry picked from commit 5d0fa034f7)
(cherry picked from commit d15627aa0d)
(cherry picked from commit ba0b21b930)
(cherry picked from commit 39ade66aac)
2024-02-05 14:44:32 +01:00
Yarden Shoham
6992ef98fc
Don't do a full page load when clicking Watch or Star (#29001)
- The watch/unwatch button and star/unstar get their own template
- The backend returns HTML instead of redirect

---------

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2024-02-05 09:56:20 +00:00
Jason Song
0d136df3f0
Remove useless template file (#29053)
Removed `templates/repo/settings/nav.tmpl`.

I don't think it's still used.

On main branch:
<img width="521" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/c0bf958c-698a-4348-840e-3ade0312bd6e">

On commit 755eec745f (the commit that
created this file):

<img width="615" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/5156b26d-1ecd-4197-a0a6-dc2d17652ff4">
2024-02-05 09:23:08 +00:00
Bram Hagens
50f55f11c4
Show whether a PR is WIP inside popups (#28975)
Fixes https://codeberg.org/forgejo/forgejo/issues/2257

Draft status of a PR is currently not exposed by the API. This PR adds a
'draft' field to pull requests in the API, which is used to correctly
set the PR color/icon in a ContextPopup.

---

Before:

![image](https://github.com/go-gitea/gitea/assets/5541521/72cbd30e-1175-4338-aa97-ac99c46c5118)

After:

![image](https://github.com/go-gitea/gitea/assets/5541521/111c9eba-460e-4d57-bcca-23a151c3a4f1)
2024-02-04 22:37:45 +00:00
yp05327
3aed8ae034
Fix default avatar image size in PR diff page (#28971)
Fix #28941

ps: didn't test. The repo is too big to migrate.
2024-02-02 10:01:11 +00:00
silverwind
a062725758
Update JS and PY dependencies, build for es2020 browsers (#28977)
- Update all JS dependencies minus @mcaptcha/vanilla-glue
- Fix new lint errors
- Regenerate SVGs
- Switch to maintained stylelint stylistic plugin
- Tested Mermaid, Citation, Swagger, sorting
- Raise ESBuild target to `es2020` as dictated by `pretty-ms`
dependency.
2024-02-02 09:36:32 +00:00
delvh
71422c0e3b
Wrap contained tags and branches again (#29021)
Fixes #29016

## After

![grafik](https://github.com/go-gitea/gitea/assets/51889757/2c72ee8f-439e-4328-85df-77772e0f4aef)
2024-02-02 04:51:09 +00:00
wxiaoguang
e6265cf59d
Fix incorrect button CSS usages (#29015) 2024-02-01 21:28:50 +00:00
yp05327
64faecefe1
Fix UI Spacing Errors in mirror settings (#28990) 2024-02-01 00:04:23 +00:00
Yarden Shoham
3e8414179c
Introduce htmx and use it to avoid full page load on Subscribe and Follow (#28908)
- Closes https://github.com/go-gitea/gitea/issues/28880

This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.

- Add `htmx.js` that imports `htmx.org` and initializes error toasts
- Place `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` on the
`<body>` tag so every request that htmx sends is authenticated
- Place `hx-swap="outerHTML"` on the `<body>` tag so the response of
each htmx request replaces the tag it targets (as opposed to its inner
content)
- Place `hx-push-url="false"` on the `<body>` tag so no changes to the
URL happen in `<form>` tags
- Add the `is-loading` class during request

### Error toasts in action


![errors](https://github.com/go-gitea/gitea/assets/20454870/181a1beb-1cb8-4858-abe8-fa1fc3f5b8f3)

## Don't do a full page load when clicking the subscribe button
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
  - `hx-target="this"` to replace the form tag with the new form tag
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page

### Before


![subscribe_before](https://github.com/go-gitea/gitea/assets/20454870/cb2439a2-c3c0-425c-8d3c-5d646b1cdc28)

### After


![subscribe_after](https://github.com/go-gitea/gitea/assets/20454870/6fcd77d8-7b11-40b0-af4f-b152aaad787c)

## Don't do a full page load when clicking the follow button
- Use htmx to perform the button request
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-indicator="#profile-avatar-card"` to place the loading indicator
on the card
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page

### Before


![follow_before](https://github.com/go-gitea/gitea/assets/20454870/a210b643-6e74-4ff9-8e61-d658c62edf1f)

### After


![follow_after](https://github.com/go-gitea/gitea/assets/20454870/5bb19ae9-0d59-4ae3-b538-4c83334e4722)

---------

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: Giteabot <teabot@gitea.io>
2024-01-30 15:45:54 +01:00
silverwind
60e4a98ab0
Preserve BOM in web editor (#28935)
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:

- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.

Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
2024-01-27 18:02:51 +00:00
JakobDev
7ed18566e1
Show in Web UI if file is vendored and generated (#28620)
This simple shows in the Web UI is a file is vendored and/or generated.


![grafik](https://github.com/go-gitea/gitea/assets/15185051/bfe45fcc-cfec-4ba1-8d93-c0a262c3ae1c)

![grafik](https://github.com/go-gitea/gitea/assets/15185051/9f222a49-e7bf-4540-ba64-43dcc5767b76)

---------

Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2024-01-24 13:51:37 +08:00
Jimmy Praet
ee3e83eec1
Don't reload timeline page when (un)resolving or replying conversation (#28654)
Fixes #15981
2024-01-24 03:26:28 +00:00
JakobDev
4567a3a1ad
Allow to sync tags from admin dashboard (#28045)
Inspired by #28043

This PR adds a option to the Admin Dashboard to sync all tags to the
database.


![grafik](https://github.com/go-gitea/gitea/assets/15185051/26ac51ef-82a4-4fd9-a6a6-5aefec612ff6)
2024-01-24 03:02:04 +00:00
JakobDev
f3ba3e922d
Don't run push mirrors for archived repos (#27140)
Fixes https://codeberg.org/forgejo/forgejo/issues/612

At the moment push mirrors are still run if a repo is archived. This PR
fixes this.
2024-01-24 02:32:57 +00:00
wackbyte
fd97613b65
Fix hardcoded GitHub icon used as migrated release avatar (#28910) 2024-01-24 01:07:13 +00:00
yp05327
b693611b35
Don't show new pr button when page is not compare pull (#26431)
Before:

![image](https://github.com/go-gitea/gitea/assets/18380374/ba69252f-3582-414a-9d62-b2b78d7035dd)
After:

![image](https://github.com/go-gitea/gitea/assets/18380374/71b8587c-b96e-48fb-b3e5-1a2a8b5d06fa)
(TestOrg:test is a tag not branch)

Problem:
In the template, we will not add `compare pull` class when
`PageIsComparePull` is false.

a370efc13f/templates/repo/diff/compare.tmpl (L2)
But in the js, we are using `.repository.compare.pull` to find the
button:

a370efc13f/web_src/js/features/repo-legacy.js (L552-L563)
So, if `PageIsComparePull` is false, the `New Pull Request` button will
be there, but has no response when we click it.
2024-01-21 15:13:00 +00:00
6543
49d7663929
Revert adding htmx until we finaly decide to add it (#28879) 2024-01-21 21:42:35 +08:00
Yarden Shoham
1df06e3f39
Don't do a full page load when clicking the follow button (#28872)
- Use htmx to perform the button request
- `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` to authenticate (we
should probably learn to reuse this)
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-swap="outerHTML"` to replace the card (as opposed to its inner
content) with the new card that shows the new follower count and button
color
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page

# Before

![before](https://github.com/go-gitea/gitea/assets/20454870/86899d15-41c9-42ed-bd85-253b9caac7f8)

# After

![after](https://github.com/go-gitea/gitea/assets/20454870/59455d96-548c-4a81-a5b0-fab1dc1e87ef)

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
2024-01-20 23:37:22 +01:00
Yarden Shoham
14f6fcf448
Don't do a full page load when clicking the subscribe button (#28871)
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
  - `hx-target="this"` to replace the form tag with the new form tag
  - `hx-push-url="false"` to disable a change to the URL
  - `hx-swap="show:no-scroll"` to preserve the scroll position
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
- Include `htmx.org` in javascript imports

This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.

# Before


![before](https://github.com/go-gitea/gitea/assets/20454870/4ec3e81e-4dbf-4338-9968-b0655c276d4c)

# After


![after](https://github.com/go-gitea/gitea/assets/20454870/8c8841af-9bfe-40b2-b1cd-cd1f3c90ba4d)

---------

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
2024-01-20 20:44:51 +01:00
Adam Majer
d68a613ba8
Add support for sha256 repositories (#23894)
Currently only SHA1 repositories are supported by Gitea. This adds
support for alternate SHA256 with the additional aim of easier support
for additional hash types in the future.

Fixes: #13794
Limited by: https://github.com/go-git/go-git/issues/899
Depend on: #28138

<img width="776" alt="图片" src="https://github.com/go-gitea/gitea/assets/81045/5448c9a7-608e-4341-a149-5dd0069c9447">

---------

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
2024-01-19 17:05:02 +01:00
KN4CK3R
461d8b53c2
Fix some RPM registry flaws (#28782)
Related #26984
(https://github.com/go-gitea/gitea/pull/26984#issuecomment-1889588912)

Fix admin cleanup message.
Fix models `Get` not respecting default values.
Rebuild RPM repository files after cleanup.
Do not add RPM group to package version name.
Force stable sorting of Alpine/Debian/RPM repository data.
Fix missing deferred `Close`.
Add tests for multiple RPM groups.
Removed non-cached `ReplaceAllStringRegex`.

If there are multiple groups available, it's stated in the package
installation screen:

![grafik](https://github.com/go-gitea/gitea/assets/1666336/8f132760-882c-4ab8-9678-77e47dfc4415)
2024-01-19 11:37:10 +00:00
yp05327
4674aea25b
Fix display latest sync time for pull mirrors on the repo page (#28841)
Follow #28712

1. Missing Locale word `mirror_sync`
2. Maybe forgot checking the conflict from #27760

Before:

![image](https://github.com/go-gitea/gitea/assets/18380374/6100d35b-7fe3-4095-9c24-7875568f7380)

After:

![image](https://github.com/go-gitea/gitea/assets/18380374/69647169-b812-45bc-a267-ab28f2df6ef6)
2024-01-18 18:27:07 +08:00
JakobDev
edfb57e699
Render code block in activity tab (#28816)
This is a little bugfix. Inline code is usually rendered in issue
titles, but it is missing in the activity tab.

Before:
![Screenshot 2024-01-16 at 14-20-51
Test](https://github.com/go-gitea/gitea/assets/15185051/383370f3-0fb2-49de-81cc-014e5cf86727)
After:

![grafik](https://github.com/go-gitea/gitea/assets/15185051/83eaf973-ce9a-44ce-beea-2db49fc8bd73)
2024-01-16 22:38:09 +08:00
Lunny Xiao
c08d263a19
Remove trust model selection from repository creation on web page because it can be changed in settings later (#28814)
As more and more options can be set for creating the repository, I don't
think we should put all of them into the creation web page which will
make things look complicated and confusing.

And I think we need some rules about how to decide which should/should
not be put in creating a repository page. One rule I can imagine is if
this option can be changed later and it's not a MUST on the creation,
then it can be removed on the page. So I found trust model is the first
one.

This PR removed the trust model selections on creating a repository web
page and kept others as before.
This is also a preparation for #23894 which will add a choice about SHA1
or SHA256 that cannot be changed once the repository created.
2024-01-16 20:54:48 +08:00
Denys Konovalov
d971dfbae1
Fix links in issue card (#28806)
Fixes_
https://github.com/go-gitea/gitea/issues/23318#issuecomment-1611086747
2024-01-15 22:38:13 +02:00
JakobDev
885cc32b14
Show latest commit for file (#28067)
If you view a file, you can now see the latest commit that changed that file.

![grafik](https://github.com/go-gitea/gitea/assets/15185051/272c3120-6db7-4f88-86e1-60080c9aabe5)

---------

Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
2024-01-15 17:42:15 +01:00
Gwyneth Morgan
2c3da59e27
Add ability to see open and closed issues at the same time (#28757)
By clicking the currently active "Open" or "Closed" filter button in the
issue list, the user can toggle that filter off in order to see all
issues regardless of state. The URL "state" parameter will be set to
"all" and the "Open"/"Closed" button will not show as active.
2024-01-15 15:07:22 +00:00
Dmitry Sharshakov
2d343f8987
Display latest sync time for pull mirrors on the repo page (#28712)
Fixes #25168

---------

Co-authored-by: delvh <dev.lh@web.de>
2024-01-15 14:37:14 +00:00
KN4CK3R
637451a45e
Rework markup link rendering (#26745)
Fixes #26548

This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.

The added tests should ensure the same output for the old and new
behaviour (besides the bug).

We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:

<details>
  <summary>Profile</summary> 

https://try.gitea.io/KN4CK3R

![grafik](https://github.com/go-gitea/gitea/assets/1666336/109ae422-496d-4200-b52e-b3a528f553e5)

</details>

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2024-01-15 08:49:24 +00:00
Jimmy Praet
5d3fdd1212
Add branch protection setting for ignoring stale approvals (#28498)
Fixes #27114.

* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.

For some users this new behavior of dismissing the stale reviews is not
desirable.

So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.

---------

Co-authored-by: delvh <dev.lh@web.de>
2024-01-15 07:20:01 +00:00
yp05327
ce0225c1b8
Forbid removing the last admin user (#28337)
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2024-01-15 06:51:43 +00:00
Gwyneth Morgan
e5313248a8
Add non-JS fallback for reaction tooltips (#28785)
When JavaScript is not loaded, fall back to displaying reaction tooltips
with the default browser `title` attribute. An element with a present
but empty `data-tooltip-content` will use the `title` attribute for its
tippy.js tooltip content, so when JavaScript is enabled, this functions
the same as the current behavior.
2024-01-15 09:42:59 +08:00
wxiaoguang
ad0b637d46
Fix button size in "attached header right" (#28770)
Before:

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/c82f8615-04d4-408f-95bf-689c227a8814)



![image](https://github.com/go-gitea/gitea/assets/2114189/d01d05a7-09ca-48f3-a0e7-fec48119b426)

</details>

After:



![image](https://github.com/go-gitea/gitea/assets/2114189/e560398e-2fa4-4f46-9229-f6acc70e32ab)


![image](https://github.com/go-gitea/gitea/assets/2114189/bd18961d-0636-4584-b893-c465daaf40af)
2024-01-12 14:43:40 +00:00
wxiaoguang
34a0684397
Improve CSS helper naming (#28769)
* `gt-w-100` => `gt-w-full` to match tailwind
* clarify `gt-hidden` priority
2024-01-12 20:28:01 +08:00
Denys Konovalov
7d62615513
Revamp repo header (#27760)
Redesign repo header with following new aspects:
- responsive & better-looking repo title
- hide repo button text instead of icons in mobile view
- use same tab style as on explore and org page

<details>
<summary>Before:</summary>


![grafik](https://github.com/go-gitea/gitea/assets/47871822/57360b77-d43c-49ac-b798-2363c03da7ec)

![grafik](https://github.com/go-gitea/gitea/assets/47871822/d4117f79-a5f5-4f36-bf65-bbada3e7e73b)

![grafik](https://github.com/go-gitea/gitea/assets/47871822/e26f967f-e264-4337-9925-3d942e04fd6d)

![grafik](https://github.com/go-gitea/gitea/assets/47871822/b4683c8d-9c6a-4089-afa7-8dd219e43a46)


</details>

<details>
<summary>After:</summary>


![grafik](https://github.com/go-gitea/gitea/assets/47871822/8ddbc9f6-53c7-4e4e-bea9-704fd93524ca)

![grafik](https://github.com/go-gitea/gitea/assets/47871822/c0588aa9-788d-469c-98a0-81484fbd220c)

![grafik](https://github.com/go-gitea/gitea/assets/47871822/206e931e-404d-4d1b-92ce-908698addfcc)

![grafik](https://github.com/go-gitea/gitea/assets/47871822/a508f9c8-fadc-4a85-94ba-18796f77e07b)
2024-01-12 03:44:06 +00:00
Exploding Dragon
ba4d0b8ffb
Support for grouping RPMs using paths (#26984)
The current rpm repository places all packages in the same repository,
and different systems (el7,f34) may hit packages that do not belong to
this distribution ( #25304 ) , which now supports grouping of rpm.

![图片](https://github.com/go-gitea/gitea/assets/33776693/d1e1d99f-7799-4b2b-a19b-cb2a5c692914)

Fixes #25304 .
Fixes #27056 .

Refactor: [#25866](https://github.com/go-gitea/gitea/pull/25866)
2024-01-12 03:16:05 +00:00
Lunny Xiao
c65f8623e6
Hide code related setting options in repository when code unit is disabled (#28631)
Since #20805, code can be hidden.
However, the related settings are still shown even though they don't
have any meaning then.


https://github.com/go-gitea/gitea/assets/81045/5fdee54d-ac81-418a-82f7-eadff048cedd
2024-01-10 11:55:59 +00:00