When installing Forgejo via the on-line installer, force
DisableRegistration to true, to discourage creating instances with open
registration. Because open registration requires constant vigil to fight
off spammers of all kinds, it is not a great default. It should be a
conscious decision. This change is made in an effort to make the choice
of running an instance with open registration a conscious choice, rather
than simply the default.
Partially addresses #3925.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Do not try to create a new authorization grant when one exists already,
thus preventing a DB-related authorization issue.
Fix https://github.com/go-gitea/gitea/pull/30790#issuecomment-2118812426
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
(cherry picked from commit 9c8c9ff6d10b35de8d2d7eae0fc2646ad9bbe94a)
Remove "EncodeSha1", it shouldn't be used as a general purpose hasher
(just like we have removed "EncodeMD5" in #28622)
Rewrite the "time-limited code" related code and write better tests, the
old code doesn't seem quite right.
(cherry picked from commit fb1ad920b769799aa1287441289d15477d9878c5)
Conflicts:
modules/git/utils_test.go
trivial context conflict because sha256 testing in Forgejo has diverged
When creating a repo, the "FORCE_PRIVATE" config option should be
respected, `readonly` doesn't work for checkbox, so it should use
`disabled` attribute.
(cherry picked from commit edbf74c418061b013a5855f604dd6be6baf34132)
Conflicts:
templates/repo/create.tmpl
templates/repo/migrate/codebase.tmpl
templates/repo/migrate/git.tmpl
templates/repo/migrate/gitbucket.tmpl
templates/repo/migrate/gitea.tmpl
templates/repo/migrate/github.tmpl
templates/repo/migrate/gitlab.tmpl
templates/repo/migrate/gogs.tmpl
templates/repo/migrate/onedev.tmpl
already in forgejo fc0c5e80da Fix and improve repo visibility checkbox when FORCE_PRIVATE is on (#3786)
enforcing FORCE_PRIVATE on repo settings was manually tested
with a repository of an unprivileged user after setting
FORCE_PRIVATE = true
the test file used has a size below the default threshold and will
never be compressed because of that, regardless of its extension. Reduce
the threshold to 10 bytes otherwise the test is a false positive.
Previously, if no branch was explicitly specified for a workflow, it
defaulted to the default branch of the repo. This worked fine for
workflows that were triggered on push, but it prevented showing badges
for workflows that only run on tags, or on schedule - since they do not
run on a specific branch.
Thus, relax the conditions, and if no branch is specified, just return
the latest run of the given workflow. If one is specified, *then*
restrict it to said branch.
Fixes#3487.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Current package registry for RubyGems does not work with Bundler, because it implements neither the [compact index](https://guides.rubygems.org/rubygems-org-compact-index-api/) or the [dependency API](https://guides.rubygems.org/rubygems-org-api/). As a result, bundler complains about finding non-existing dependencies when installing anything with dependency: `revealed dependencies not in the API or the lockfile`.
This patch provides a minimal implementation for the compact index API to solve this issue. Specifically, we implemented a version that does not cache the results / do incremental updates; which is consistent with the current implementation.
Testing:
* Modified existing integration tests.
* Manually Verified bundler is able to parse the served versions / info file.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3811
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Haoyuan (Bill) Xing <me@hoppinglife.com>
Co-committed-by: Haoyuan (Bill) Xing <me@hoppinglife.com>
Fix#30923
(cherry picked from commit effb405cae88474c27f5c8322a2627019af1cf64)
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Conflicts:
- modules/setting/oauth2.go
Conflicted due to different ways of logging. Since the log
message is removed anyway, resolved by removing it.
- modules/setting/oauth2_test.go
Manually copied the test added by Gitea.
- routers/install/install.go
Not a conflict per se, but adjusted to use NewJwtSecret().
Fixes#30959
Adds an API test for protected tags.
Fix existing tag in combination with fixtures.
(cherry picked from commit b1d8f13bd0ecd9c576ebf2ecbd9c7dbeb3f5254f)
Resolve#30917
Make the APIs for adding labels and replacing labels support both label
IDs and label names so the
[`actions/labeler`](https://github.com/actions/labeler) action can work
in Gitea.
<img width="600px"
src="https://github.com/go-gitea/gitea/assets/15528715/7835c771-f637-4c57-9ce5-e4fbf56fa0d3"
/>
(cherry picked from commit b3beaed147466739de0c24fd80206b5af8b71617)
Conflicts:
- modules/structs/issue_label.go
Resolved by applying the Gitea change by hand.
- tests/integration/api_issue_label_test.go
Resolved by copying the new tests.
Merging PR may fail because of various problems. The pull request may
have a dirty state because there is no transaction when merging a pull
request. ref
https://github.com/go-gitea/gitea/pull/25741#issuecomment-2074126393
This PR moves all database update operations to post-receive handler for
merging a pull request and having a database transaction. That means if
database operations fail, then the git merging will fail, the git client
will get a fail result.
There are already many tests for pull request merging, so we don't need
to add a new one.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit ebf0c969403d91ed80745ff5bd7dfbdb08174fc7)
Conflicts:
modules/private/hook.go
routers/private/hook_post_receive.go
trivial conflicts because
263a716cb5 * Performance optimization for git push (#30104)
was not cherry-picked and because of
998a431747 Do not update PRs based on events that happened before they existed
When a user logout and then login another user, the reverseproxy auth
should be checked before session otherwise the old user is still login.
(cherry picked from commit 26ae5922348d2dbaf2161bbd6ac79b2aa455e5f0)
It's time (maybe somewhat late) to remove some deprecated stuff for the
runner.
- `x-runner-version`: runners needn't to report version in every
request, they will call `Declare`.
- `AgentLabels`: runners will report them as `Labels`.
(cherry picked from commit b9396a9b852e4fea0e2c39ef3ef2fdfbc9ea248a)
Conflicts:
routers/api/actions/runner/interceptor.go
trivial conflict because
e80466f734 Resolve lint for unused parameter and unnecessary type arguments (#30750)
was not cherry-picked
https://github.com/go-gitea/gitea/pull/25812#issuecomment-2099833692
Follow #30573
(cherry picked from commit f7d2f695a4c57b245830a526e77fa62e99e00254)
Conflicts:
services/pull/check.go
trivial conflict because
9b2536b78fdcd3cf444a2f54857d9871e153858f Update misspell to 0.5.1 and add `misspellings.csv` (#30573)
was not cherry-picked
The previous implementation will start multiple POST requests from the
frontend when moving a column and another bug is moving the default
column will never be remembered in fact.
- [x] This PR will allow the default column to move to a non-first
position
- [x] And it also uses one request instead of multiple requests when
moving the columns
- [x] Use a star instead of a pin as the icon for setting the default
column action
- [x] Inserted new column will be append to the end
- [x] Fix#30701 the newly added issue will be append to the end of the
default column
- [x] Fix when deleting a column, all issues in it will be displayed
from UI but database records exist.
- [x] Add a limitation for columns in a project to 20. So the sorting
will not be overflow because it's int8.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit a303c973e0264dab45a787c4afa200e183e0d953)
Conflicts:
routers/web/web.go
e91733468ef726fc9365aa4820cdd5f2ddfdaa23 Add missing database transaction for new issue (#29490) was not cherry-picked
services/issue/issue.go
fe6792dff3 Enable/disable owner and repo projects independently (#28805) was not cherry-picked
Before explaining the fix itself, lets look at the `action` table, and
how it is populated. Data is only ever inserted into it via
`activities_model.NotifyWatchers`, which will:
- Insert a row for each activity with `UserID` set to the acting user's
ID - this is the original activity, and is always inserted if anything
is to be inserted at all.
- It will insert a copy of each activity with the `UserID` set to the
repo's owner, if the owner is an Organization, and isn't the acting
user.
- It will insert a copy of each activity for every watcher of the repo,
as long as the watcher in question has read permission to the repo
unit the activity is about.
This means that if a repository belongs to an organizations, for most
activities, it will have at least two rows in the table. For
repositories watched by people other than their owner, an additional row
for each watcher.
These are useful duplicates, because they record which activities are
relevant for a particular user. However, for cases where we wish to see
the activities that happen around a repository, without limiting the
results to a particular user, we're *not* interested in the duplicates
stored for the watchers and the org. We only need the originals.
And this is what this change does: it introduces an additional option to
`GetFeedsOptions`: `OnlyPerformedByActor`. When this option is set,
`activities.GetFeeds()` will only return the original activities, where
the user id and the acting user id are the same. As these are *always*
inserted, we're not missing out on any activities. We're just getting
rid of the duplicates. As this is an additional `AND` condition, it can
never introduce items that would not have been included in the result
set before, it can only reduce, not extend.
These duplicates were only affecting call sites where `RequestedRepo`
was set, but `RequestedUser` and `RequestedTeam` were not. Both of those
call sites were updated to set `OnlyPerformedByActor`. As a result,
repository RSS feeds, and the `/repos/{owner}/{repo}/activities/feeds`
API end points no longer return dupes, only the original activities.
Rather than hardcoding this behaviour into `GetFeeds()` itself, I chose
to implement it as an explicit option, for the sake of clarity.
FixesCodeberg/Community#684, and addresses gitea#20986.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
More about codespell: https://github.com/codespell-project/codespell .
I personally introduced it to dozens if not hundreds of projects already and so far only positive feedback.
```
❯ grep lint-spell Makefile
@echo " - lint-spell lint spelling"
@echo " - lint-spell-fix lint spelling and fix issues"
lint: lint-frontend lint-backend lint-spell
lint-fix: lint-frontend-fix lint-backend-fix lint-spell-fix
.PHONY: lint-spell
lint-spell: lint-codespell
.PHONY: lint-spell-fix
lint-spell-fix: lint-codespell-fix
❯ git grep lint- -- .forgejo/
.forgejo/workflows/testing.yml: - run: make --always-make -j$(nproc) lint-backend checks-backend # ensure the "go-licenses" make target runs
.forgejo/workflows/testing.yml: - run: make lint-frontend
```
so how would you like me to invoke `lint-codespell` on CI? (without that would be IMHO very suboptimal and let typos sneak in)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3270
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Yaroslav Halchenko <debian@onerussian.com>
Co-committed-by: Yaroslav Halchenko <debian@onerussian.com>
We should be listing all repositories by default.
Fixes#28483.
(cherry picked from commit 9f0ef3621a3b63ccbe93f302a446b67dc54ad725)
Conflict:
- if ctx.IsSigned && ctx.Doer.IsAdmin || permission.UnitAccessMode(unit_model.TypeCode) >= perm.AccessModeRead {
+ if ctx.IsSigned && ctx.Doer.IsAdmin || permission.HasAccess() {
because of https://codeberg.org/forgejo/forgejo/pulls/2001
Fix#30807
reuse functions in services
(cherry picked from commit a50026e2f30897904704895362da0fb12c7e5b26)
Conflicts:
models/issues/issue_update.go
routers/api/v1/repo/issue.go
trivial context conflict because of 'allow setting the update date on issues and comments'
Just merge actions.go file to action.go
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
(cherry picked from commit e67fbe4f15cdc544f6bec975de6560556724f098)
This commit forces the resource owner (user) to always approve OAuth 2.0
authorization requests if the client is public (e.g. native
applications).
As detailed in [RFC 6749 Section 10.2](https://www.rfc-editor.org/rfc/rfc6749.html#section-10.2),
> The authorization server SHOULD NOT process repeated authorization
requests automatically (without active resource owner interaction)
without authenticating the client or relying on other measures to ensure
that the repeated request comes from the original client and not an
impersonator.
With the implementation prior to this patch, attackers with access to
the redirect URI (e.g., the loopback interface for
`git-credential-oauth`) can get access to the user account without any
user interaction if they can redirect the user to the
`/login/oauth/authorize` endpoint somehow (e.g., with `xdg-open` on
Linux).
Fixes#25061.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 5c542ca94caa3587329167cfe9e949357ca15cf1)
Before, we would just throw 500 if a user passes an attachment that is
not an allowed type. This commit catches this error and throws a 422
instead since this should be considered a validation error.
(cherry picked from commit 872caa17c0a30d95f85ab75c068d606e07bd10b3)
Conflicts:
tests/integration/api_comment_attachment_test.go
tests/integration/api_issue_attachment_test.go
trivial context conflict because of 'allow setting the update date on issues and comments'
Resolve all cases for `unused parameter` and `unnecessary type
arguments`
Related: #30729
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit e80466f7349164ce4cf3c07bdac30d736d20f035)
Conflicts:
modules/markup/markdown/transform_codespan.go
modules/setting/incoming_email.go
routers/api/v1/admin/user_badge.go
routers/private/hook_pre_receive.go
tests/integration/repo_search_test.go
resolved by discarding the change, this is linting only and
for the sake of avoiding future conflicts
This allows `nix flake metadata` and nix in general to lock a *branch*
tarball link in a manner that causes it to fetch the correct commit even
if the branch is updated with a newer version.
For further context, Nix flakes are a feature that, among other things,
allows for "inputs" that are "github:someuser/somerepo",
"https://some-tarball-service/some-tarball.tar.gz",
"sourcehut:~meow/nya" or similar. This feature allows our users to fetch
tarballs of git-based inputs to their builds rather than using git to
fetch them, saving significant download time.
There is presently no gitea or forgejo specific fetcher in Nix, and we
don't particularly wish to have one. Ideally (as a developer on a Nix
implementation myself) we could just use the generic tarball fetcher and
not add specific forgejo support, but to do so, we need additional
metadata to know which commit a given *branch* tarball represents, which
is the purpose of the Link header added here.
The result of this patch is that a Nix user can specify `inputs.something.url =
"https://forgejo-host/some/project/archive/main.tar.gz"` in flake.nix
and get a link to some concrete tarball for the actual commit in the
lock file, then when they run `nix flake update` in the future, they
will get the latest commit in that branch.
Example of it working locally:
» nix flake metadata --refresh 'http://localhost:3000/api/v1/repos/jade/cats/archive/main.tar.gz?dir=configs/nix'
Resolved URL: http://localhost:3000/api/v1/repos/jade/cats/archive/main.tar.gz?dir=configs/nix
Locked URL: 804ede182b.tar.gz?dir=configs
/nix&narHash=sha256-yP7KkDVfuixZzs0fsqhSETXFC0y8m6nmPLw2GrAMxKQ%3D
Description: Computers with the nixos
Path: /nix/store/s856c6yqghyan4v0zy6jj19ksv0q22nx-source
Revision: 804ede182b6b66469b23ea4d21eece52766b7a06
Last modified: 2024-05-02 00:48:32
For details on the header value, see:
56763ff918/doc/manual/src/protocols/tarball-fetcher.md
In `repo.RemoveDependency`, use `PostFormValue` instead of
`PostForm.Get`. The latter requires `ParseForm()` to be called prior,
and in this case, has no benefit over `PostFormValue` anyway (which
calls `ParseForm()` if necessary).
While this currently does not cause any issue as far as I can tell, it
feels like a bug lying in wait for the perfect opportunity. Lets squash
it before it can do harm.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When subscribing or unsubscribing to/from an issue on the web ui, the
request was posted to a route handled by `repo.IssueWatch`. This
function used `ctx.Req.PostForm.Get()`, erroneously.
`request.PostForm` is *only* available if `request.ParseForm()` has been
called before it. The function in question did not do that. Under some
circumstances, something, somewhere did end up calling `ParseForm()`,
but not in every scenario.
Since we do not need to check for multiple values, the easiest fix here
is to use `ctx.Req.PostFormValue`, which will call `ParseForm()` if
necessary.
Fixes#3516.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
