mirror of
https://github.com/ferrous-systems/embedded-trainings-2020.git
synced 2024-11-04 16:09:32 +00:00
27 lines
943 B
Markdown
27 lines
943 B
Markdown
# ` dongle`
|
|
|
|
Pre-made applications for the nRF52840 Dongle.
|
|
|
|
These applications will be used in the beginner workshop.
|
|
|
|
## Getting familiar with the hardware
|
|
|
|
> TODO review for accessibility
|
|
|
|
### LEDs
|
|
|
|
- The green LED (LD1) is connected to pin P0.6
|
|
- The red channel of the RGB LED (LD2) is connected to pin P0.8
|
|
- The green channel of the RGB LED (LD2) is connected to pin P**1**.9
|
|
- The blue channel of the RGB LED (LD2) is connected to pin P0.12
|
|
|
|
Both LEDs are mounted near the USB connector.
|
|
|
|
### Buttons
|
|
|
|
- The Reset button is mounted sideways near the edge of the board that's opposite of the USB connector.
|
|
- The SW1 button is connected to pin P**1**.06. This round-ish button is right next to the RESET button but closer to the USB connector.
|
|
|
|
## References
|
|
|
|
- [nRF52840 Dongle section on Nordic Semiconductor's info center](https://infocenter.nordicsemi.com/index.jsp?topic=%2Fug_getting_started%2FUG%2Fgs%2Fdevelop_sw.html&cp=1_0_2)
|