embedded-trainings-2020/down-the-stack-book/src/the_pac.md

The Peripheral Access Crate

---

Introduction

This crate sits at the bottom of the 'stack'. It provides access to the memory-mapped peripherals in your MCU.

---

Memory Mapped Peripherals

• e.g. a UART peripheral
• Has registers, represented by a memory address
• Registers are usually consecutive in memory (not always)
• Peripherals can have instances (same layout of registers, different start address)
  • UART0, UART1, etc

---

Datasheets

• Registers are comprised of one or more fields.
• Each field is at least 1 bit in length.
• Sometimes fields can only take from a limited set of values
• This is all in your datasheet!

---

C Code!

Embedded Code in C often uses shifts and bitwise-AND to make up registers from fields.

#define UARTE_INTEN_CTS_SHIFT (0)
#define UARTE_INTEN_CTS_MASK (0x00000001)
#define UARTE_INTEN_NCTS_SHIFT (1)
#define UARTE_INTEN_NCTS_MASK (0x00000001)
#define UARTE_INTEN_RXRDY_SHIFT (2)
#define UARTE_INTEN_RXRDY_MASK (0x00000001)

// The other eight fields are skipped for brevity
uint32_t cts = 0;
uint32_t ncts = 1;
uint32_t rxrdy = 1;

uint32_t inten_value = ((cts & UARTE_INTEN_CTS_MASK) << UARTE_INTEN_CTS_SHIFT)
    | ((ncts & UARTE_INTEN_NCTS_MASK) << UARTE_INTEN_NCTS_SHIFT)
    | ((rxrdy & UARTE_INTEN_RXRDY_MASK) << UARTE_INTEN_RXRDY_SHIFT);

*((volatile uint32_t*) 0x40002300) = inten_value;

---

Adding structure

The various registers for a peripheral are often grouped into a struct

typedef volatile struct uart0_reg_t {
    uint32_t tasks_startrx; // @ 0x000
    uint32_t tasks_stoprx; // @ 0x004
    // ...
    uint32_t inten; // @ 0x300
    uint32_t _padding[79]; 
    uint32_t baudrate; // @ 0x500
} uart0_reg_t;

---

Rust Code

You could do this in Rust if you wanted...

const UARTE0_INTEN: *mut u32 = 0x4000_2300 as *mut u32;
unsafe { UARTE0_INTEN.write_volatile(0x0000_0003); }

But it seems like a lot of reading PDFs and re-typing everything?

---

CMSIS-SVD Files

A CMSIS-SVD (or just SVD) file is an XML description of all the peripherals, registers and fields on an MCU.

We can use svd2rust to turn this into a Peripheral Access Crate.

graph LR
    svd[(SVD XML)] --> svd2rust[<tt>svd2rust</tt>] --> rust[(Rust Source)]

---

The svd2rust generated API

• The crate has a top-level struct Peripherals with members for each Peripheral
• Each Peripheral gets a struct, like UARTE0, SPI1, etc.
• Each Peripheral struct has members for each Register
• Each Register gets a struct, like BAUDRATE, INTEN, etc.
• Each Register struct has read(), write() and modify() methods

graph TB
    Peripherals --> uarte1[.UARTE1: <b>UARTE1</b>]
    uarte1 --> uart1_baudrate[.baudrate: <b>BAUDRATE</b>]
    uarte1 --> uart1_inten[.inten: <b>INTEN</b>]
    Peripherals --> uarte2[.UARTE2: <b>UARTE2</b>]
    uarte2 --> uart2_baudrate[.baudrate: <b>BAUDRATE</b>]
    uarte2 --> uart2_inten[.inten: <b>INTEN</b>]

---

The svd2rust generated API (2)

• The read() method returns a special proxy object, with methods for each Field
• The write() method takes a closure, which is given a special 'proxy' object, with methods for each Field
  • All the Field changes are batched together and written in one go
  • Any un-written Fields are set to a default value
• The modify() method gives you both
  • Any un-written Fields are left alone

---

An example

// nrf52840 is the PAC
let p = nrf52840::Peripherals::take().unwrap();
// This register has only one field
let current_baud_rate = p.UARTE1.baudrate.read().baudrate();
// This register has multiple fields
p.UARTE1.inten.modify(|_r, w| {
    w.cts().enabled();
    w.ncts().enabled();
    w.rxrdy().enabled();
    w    
});

---

Wait, what's a closure?

• It's an anonymous function, declared in-line with your other code
• It can 'capture' local variables (although we don't use that feature here)
• It enables a very powerful Rust idiom, that you can't easily do in C...

---

Let's take it in turns

• I, the callee, need to set some stuff up
• You, the caller, need to do a bit of work
• I, the callee, need to clean everything up

We can use a closure to insert the caller-provided code in the middle of our function. We see this used all over the Rust standard library!

---

You tell me...

What are the three steps here?

p.UARTE1.inten.modify(|_r, w| {
    w.cts().enabled();
    w.ncts().enabled();
    w.rxrdy().enabled();
    w    
});

---

Documentation

Docs can be generated from the source code.

See https://docs.rs/nrf52840

Note that uarte0 is a module and UARTE0 could mean either a struct type, or a field on the Peripherals struct.