mirror of
https://github.com/matthew1000/gstreamer-cheat-sheet.git
synced 2024-11-21 07:51:00 +00:00
Updated RTMP and SRT
This commit is contained in:
Matthew Clark
parent
5a3ecebeb6
commit
4998db70e4
4 changed files with 135 additions and 21 deletions
|
|
@ -4,6 +4,8 @@ GStreamer can send and receive audio and video via a network socket, using eithe
|
|||
|
||||
*UDP* is faster but lossy - there is no attempt to resend lost network packets to it will fail if the network is not perfect. *TCP* acknowledges every network packet so is slower, but more reliable.
|
||||
|
||||
See also [SRT](srt.md) as an alternative format.
|
||||
|
||||
## UDP
|
||||
|
||||
### Audio via UDP
|
||||
|
|
|
|||
52
rtmp.md
52
rtmp.md
|
|
@ -1,22 +1,23 @@
|
|||
# RTMP (GStreamer command-line cheat sheet)
|
||||
|
||||
GStreamer can receive an RTMP stream from an RTMP server. It can also send an RTMP stream to an RTMP server.
|
||||
GStreamer can:
|
||||
* retrieve an RTMP stream from an RTMP server, and
|
||||
* also send an RTMP stream to an RTMP server (including YouTube).
|
||||
|
||||
If you need your own RTMP server, [the Nginx RTMP extension](https://github.com/arut/nginx-rtmp-module) works quite well. [Linode has a good NGINX RTMP installation guide.](https://www.linode.com/docs/guides/set-up-a-streaming-rtmp-server/)
|
||||
|
||||
### Play an RTMP stream
|
||||
|
||||
To play from RTMP server, playbin can be used (as with files, HLS streams, DASH streams, etc):
|
||||
RTMP can be live streams, or on-demand streams - playback is the same in both cases.
|
||||
|
||||
To play from RTMP server, [playbin](https://gstreamer.freedesktop.org/documentation/playback/playbin.html) can be used. (Playbin is magical - it can also play files, HLS streams, DASH streams, and many other sources!) Example:
|
||||
|
||||
```
|
||||
export RTMP_SRC="rtmp://matthewc.co.uk/vod/scooter.flv"
|
||||
gst-launch-1.0 playbin uri=$RTMP_SRC
|
||||
```
|
||||
|
||||
A test RTMP stream is available at `rtmp://184.72.239.149/vod/BigBuckBunny_115k.mov` which serves as a useful example:
|
||||
|
||||
```
|
||||
gst-launch-1.0 playbin uri='rtmp://184.72.239.149/vod/BigBuckBunny_115k.mov'
|
||||
```
|
||||
A test RTMP VOD stream is available at `rtmp://matthewc.co.uk/vod/scooter.flv` which serves as a useful example:
|
||||
|
||||
Instead of using `playbin`, it's possible to get video only with `uridecodebin` then shown with `autovideosink`:
|
||||
|
||||
|
|
@ -112,7 +113,7 @@ gst-launch-1.0 \
|
|||
mix.
|
||||
```
|
||||
|
||||
## Sending to an RTMP server
|
||||
## Sending a live stream to an RTMP server
|
||||
|
||||
The examples below use the `RTMP_DEST` environment variable. You can set it to reference your RTMP server, e.g.
|
||||
|
||||
|
|
@ -136,9 +137,9 @@ rtmp {
|
|||
}
|
||||
```
|
||||
|
||||
then the application name is `livestream`, and so your URL will be `rtmp://<your-domain>/livestream/<stream-name>`.
|
||||
then the application name is `livestream`, and so your URL will be `rtmp://<your-domain>/livestream/<stream-name>` (where `<stream-name> can be anything`).
|
||||
|
||||
### Sending a test stream to an RTMP server
|
||||
### Sending a test live stream to an RTMP server
|
||||
|
||||
To send a video test source:
|
||||
|
||||
|
|
@ -168,6 +169,37 @@ gst-launch-1.0 videotestsrc is-live=true ! \
|
|||
voaacenc bitrate=96000 ! audio/mpeg ! aacparse ! audio/mpeg, mpegversion=4 ! mux.
|
||||
```
|
||||
|
||||
### Live streaming to YouTube via RTMP
|
||||
|
||||
YouTube accepts live RTMP streams. They must have both audio and video.
|
||||
|
||||
Set up a stream by visiting [YouTube.com](https://www.youtube.com/) on desktop, and selecting 'Create' from the top-right.
|
||||
|
||||
YouTube will provide a 'Stream URL' and a 'Stream key'. Combine these to create the full URL.
|
||||
|
||||
For example, if the URL is `rtmp://a.rtmp.youtube.com/live2` and the key is `abcd-1234-5678`, then:
|
||||
|
||||
```
|
||||
export RTMP_DEST="rtmp://a.rtmp.youtube.com/live2/abcd-1234-5678"
|
||||
```
|
||||
|
||||
Given the [YouTube stream suggestions](https://support.google.com/youtube/answer/2853702)) here's a good test stream:
|
||||
|
||||
```
|
||||
gst-launch-1.0 \
|
||||
videotestsrc is-live=1 \
|
||||
! videoconvert \
|
||||
! "video/x-raw, width=1280, height=720, framerate=30/1" \
|
||||
! queue \
|
||||
! x264enc cabac=1 bframes=2 ref=1 \
|
||||
! "video/x-h264,profile=main" \
|
||||
! flvmux streamable=true name=mux \
|
||||
! rtmpsink location="${RTMP_DEST} live=1" \
|
||||
audiotestsrc is-live=1 wave=ticks \
|
||||
! voaacenc bitrate=128000 \
|
||||
! mux.
|
||||
```
|
||||
|
||||
### Send a file over RTMP
|
||||
|
||||
Audio & video:
|
||||
|
|
|
|||
56
srt.md
56
srt.md
|
|
@ -1,26 +1,57 @@
|
|||
# SRT (GStreamer command-line cheat sheet)
|
||||
|
||||
SRT is a means of sending AV between to servers.
|
||||
SRT has a client-server relationship. One side must be the server, the other the client.
|
||||
The server can either be the side that is sending the audio/video (pushing) or the side that is
|
||||
receiving (pulling). The server must have started exist before the client.
|
||||
|
||||
NOTE: THIS IS FOR GSTREAMER 1.14; IT HAS CHANGED IN 1.16.
|
||||
## Pre-requisites
|
||||
|
||||
## Server sending the AV
|
||||
|
||||
Create a sender server like this:
|
||||
If on MacOS, ensure the SRT library is installed:
|
||||
|
||||
```
|
||||
gst-launch-1.0 videotestsrc ! video/x-raw, height=360, width=640 ! videoconvert ! x264enc tune=zerolatency ! video/x-h264, profile=high ! mpegtsmux ! srtserversink uri=srt://127.0.0.1:8888/
|
||||
brew install srt
|
||||
```
|
||||
|
||||
And create a receiver client like this:
|
||||
Then at the time of writing, the default Homebrew build does not include SRT, so build from scratch:
|
||||
|
||||
```
|
||||
gst-launch-1.0 -v srtclientsrc uri="srt://127.0.0.1:8888" ! decodebin ! autovideosink
|
||||
brew install --build-from-source gst-plugins-bad
|
||||
```
|
||||
|
||||
## Server receiving the AV
|
||||
## Client receiving from server
|
||||
|
||||
The most common usage is that the server has the video, and a client reads from it.
|
||||
|
||||
To create a sender server, use `srtsink` (or alternatively, `srtserversink`):
|
||||
|
||||
```
|
||||
gst-launch-1.0 -v videotestsrc ! video/x-raw, height=360, width=640 ! videoconvert ! x264enc tune=zerolatency ! video/x-h264, profile=high ! mpegtsmux ! srtsink uri=srt://:8888
|
||||
```
|
||||
|
||||
And then recieve with `srtsrc` (or alternatively, `srtclientsrc`):
|
||||
|
||||
```
|
||||
gst-launch-1.0 -v srtsrc uri="srt://127.0.0.1:8888" ! decodebin ! autovideosink
|
||||
```
|
||||
|
||||
Don't forget, the amazing `playbin` can show anything - including SRT streams. This is useful for debugging:
|
||||
|
||||
```
|
||||
gst-launch-1.0 playbin uri=srt://127.0.0.1:8888
|
||||
```
|
||||
|
||||
By default, `srtsink` will wait for a clilent connection before allowing the stream to start. If you'd prefer this not to happen, set `wait-for-connection=false`:
|
||||
|
||||
```
|
||||
gst-launch-1.0 -v videotestsrc ! video/x-raw, height=360, width=640 ! \
|
||||
videoconvert ! clockoverlay font-desc="Sans, 48" ! x264enc tune=zerolatency ! \
|
||||
video/x-h264, profile=high ! mpegtsmux ! srtsink uri=srt://:8888 wait-for-connection=false
|
||||
```
|
||||
|
||||
## Client sending to server
|
||||
|
||||
The alternative way round is to have the producer sending the AV to the receiving server.
|
||||
|
||||
To have the server receiving, rather than sending, swap 'srtclientsrc' for 'srcserversrc'.
|
||||
Likewise, to have the client sending rather than receiving, swap 'srtserversink' for 'srtclientsink'.
|
||||
|
|
@ -28,11 +59,14 @@ Likewise, to have the client sending rather than receiving, swap 'srtserversink'
|
|||
Create a receiver server like this:
|
||||
|
||||
```
|
||||
gst-launch-1.0 -v srtserversrc uri="srt://127.0.0.1:8888" ! decodebin ! autovideosink
|
||||
gst-launch-1.0 -v srtserversrc uri="srt://127.0.0.1:8889" ! decodebin ! autovideosink
|
||||
```
|
||||
|
||||
And a sender client like this:
|
||||
|
||||
```
|
||||
gst-launch-1.0 videotestsrc ! video/x-raw, height=360, width=640 ! videoconvert ! x264enc tune=zerolatency ! video/x-h264, profile=high ! mpegtsmux ! srtclientsink uri="srt://127.0.0.1:8888/"
|
||||
```
|
||||
gst-launch-1.0 -v videotestsrc ! video/x-raw, height=360, width=640 ! \
|
||||
videoconvert ! clockoverlay font-desc="Sans, 48" ! x264enc tune=zerolatency ! \
|
||||
video/x-h264, profile=high ! mpegtsmux ! srtclientsink uri=srt://:8889
|
||||
```
|
||||
|
||||
|
|
|
|||
46
web_page_capture.md
Normal file
46
web_page_capture.md
Normal file
|
|
@ -0,0 +1,46 @@
|
|||
# Web page capture (WPE)
|
||||
|
||||
The [wpesrc](https://gstreamer.freedesktop.org/documentation/wpe/wpesrc.html?gi-language=python) plugin can take a web page, and offer it as a GStreamer source. This allows you to:
|
||||
|
||||
* Show web pages on screen, and
|
||||
* Use web pages as a means of doing graphics.
|
||||
|
||||
The `wpesrc` plugin isn't frequently used. To see if you have it installed:
|
||||
|
||||
```
|
||||
gst-inspect-1.0 | grep wpe
|
||||
```
|
||||
|
||||
## Installing
|
||||
|
||||
MacOS: The `wpesrc` plugin isn't part of the Homebrew build, unortunately.
|
||||
|
||||
Ubuntu: `wpesrc` has a separate package called `gstreamer1.0-wpe`. So to install:
|
||||
|
||||
```
|
||||
sudo apt-get install gstreamer1.0-wpe
|
||||
```
|
||||
|
||||
## Using
|
||||
|
||||
TODO
|
||||
|
||||
### Streaming to SRT
|
||||
|
||||
```
|
||||
LIBGL_ALWAYS_SOFTWARE=true gst-launch-1.0 -v wpevideosrc location="https://www.bbc.co.uk" ! videoconvert ! x264enc tune=zerolatency ! \
|
||||
video/x-h264, profile=high ! mpegtsmux ! srtsink uri=srt://:8889 wait-for-connection=false
|
||||
```
|
||||
|
||||
### Without GPU
|
||||
|
||||
Setting `LIBGL_ALWAYS_SOFTWARE=true` allows the `wpserc` element to work without GPU. This can lead to issues if the format is not set to `BGRA`. An example, sending a web page as a live stream to an RTMP server:
|
||||
|
||||
```
|
||||
LIBGL_ALWAYS_SOFTWARE=true gst-launch-1.0 \
|
||||
wpevideosrc location="https://en.wikipedia.org/wiki/Main_Page" \
|
||||
! videoconvert ! videoscale ! videorate \
|
||||
! "video/x-raw, format=BGRA, width=854, height=480, framerate=30/1" \
|
||||
! videoconvert ! queue ! x264enc speed-preset=1 ! flvmux name=muxer \
|
||||
! rtmpsink location="$RTMP_DEST live=1"
|
||||
```
|
||||
Loading…
Reference in a new issue