482 lines
30 KiB
Text
482 lines
30 KiB
Text
STRINGTABLE
|
|
BEGIN
|
|
0, "length of name must not exceed NAMELEN (%1)"
|
|
1, "length of parameter entity name must not exceed NAMELEN less the length of the PERO delimiter (%1)"
|
|
2, "length of number must not exceed NAMELEN (%1)"
|
|
3, "length of attribute value must not exceed LITLEN less NORMSEP (%1)"
|
|
4, "a name group is not allowed in a parameter entity reference in the prolog"
|
|
5, "an entity end in a token separator must terminate an entity referenced in the same group"
|
|
6, "character %1 invalid: only %2 and token separators allowed"
|
|
7, "a parameter separator is required after a number that is followed by a name start character"
|
|
8, "character %1 invalid: only %2 and parameter separators allowed"
|
|
9, "an entity end in a parameter separator must terminate an entity referenced in the same declaration"
|
|
10, "an entity end is not allowed in a token separator that does not follow a token"
|
|
11, "%1 is not a valid token here"
|
|
12, "a parameter entity reference can only occur in a group where a token could occur"
|
|
13, "token %1 has already occurred in this group"
|
|
14, "the number of tokens in a group must not exceed GRPCNT (%1)"
|
|
15, "an entity end in a literal must terminate an entity referenced in the same literal"
|
|
16, "character %1 invalid: only minimum data characters allowed"
|
|
18, "a parameter literal in a data tag pattern must not contain a numeric character reference to a non-SGML character"
|
|
19, "a parameter literal in a data tag pattern must not contain a numeric character reference to a function character"
|
|
20, "a name group is not allowed in a general entity reference in a start tag"
|
|
21, "a name group is not allowed in a general entity reference in the prolog"
|
|
22, "%1 is not a function name"
|
|
23, "%1 is not a character number in the document character set"
|
|
24, "parameter entity %1 not defined"
|
|
25, "general entity %1 not defined and no default entity"
|
|
26, "RNI delimiter must be followed by name start character"
|
|
28, "unterminated comment: found end of entity inside comment"
|
|
29, "comment started here"
|
|
30, "only one type of connector should be used in a single group"
|
|
31, "%1 is not a reserved name"
|
|
32, "%1 is not allowed as a reserved name here"
|
|
33, "length of interpreted minimum literal must not exceed reference LITLEN (%1)"
|
|
34, "length of tokenized attribute value must not exceed LITLEN less NORMSEP (%1)"
|
|
35, "length of system identifier must not exceed LITLEN (%1)"
|
|
36, "length of interpreted parameter literal must not exceed LITLEN (%1)"
|
|
37, "length of interpreted parameter literal in data tag pattern must not exceed DTEMPLEN (%1)"
|
|
38, "literal is missing closing delimiter"
|
|
39, "%1 invalid: only %2 and parameter separators are allowed"
|
|
40, "%1 invalid: only %2 and token separators are allowed"
|
|
41, "%1 invalid: only %2 and token separators are allowed"
|
|
42, "unknown declaration type %1"
|
|
43, "%1 declaration not allowed in DTD subset"
|
|
44, "character %1 not allowed in declaration subset"
|
|
45, "end of document in DTD subset"
|
|
46, "character %1 not allowed in prolog"
|
|
47, "end of document in prolog"
|
|
48, "%1 declaration not allowed in prolog"
|
|
49, "%1 used both a rank stem and generic identifier"
|
|
50, "omitted tag minimization parameter can be omitted only if OMITTAG NO is specified"
|
|
51, "element type %1 already defined"
|
|
52, "entity reference with no applicable DTD"
|
|
53, "invalid comment declaration: found %1 outside comment but inside comment declaration"
|
|
54, "comment declaration started here"
|
|
55, "%1 declaration not allowed in instance"
|
|
56, "non-SGML character not allowed in content"
|
|
57, "no current rank for rank stem %1"
|
|
58, "duplicate attribute definition list for notation %1"
|
|
59, "duplicate attribute definition list for element %1"
|
|
60, "entity end not allowed in end tag"
|
|
61, "character %1 not allowed in end tag"
|
|
62, "%1 invalid: only S separators and TAGC allowed here"
|
|
63, "character data is not allowed here"
|
|
64, "document type does not allow element %1 here"
|
|
65, "document type does not allow element %1 here; missing one of %2 start-tag"
|
|
66, "document type does not allow element %1 here; assuming missing %2 start-tag"
|
|
67, "no start tag specified for implied empty element %1"
|
|
68, "end tag for %1 omitted, but its declaration does not permit this"
|
|
69, "start tag was here"
|
|
70, "end tag for %1 omitted, but OMITTAG NO was specified"
|
|
71, "start tag was here"
|
|
72, "start tag omitted for element %1 with declared content"
|
|
73, "end tag for %1 which is not finished"
|
|
74, "start tag for %1 omitted, but its declaration does not permit this"
|
|
75, "number of open elements exceeds TAGLVL (%1)"
|
|
76, "element %1 undefined"
|
|
77, "empty end tag but no open elements"
|
|
78, "%1 not finished but containing element ended"
|
|
79, "end tag for element %1 which is not open"
|
|
80, "internal parameter entity %1 cannot be CDATA or SDATA"
|
|
81, "character %1 not allowed in attribute specification list"
|
|
82, "an attribute value must be a literal unless it contains only name characters"
|
|
83, "entity end not allowed in attribute specification list except in attribute value literal"
|
|
84, "external parameter entity %1 cannot be CDATA, SDATA, NDATA or SUBDOC"
|
|
85, "duplicate declaration of entity %1"
|
|
86, "duplicate declaration of parameter entity %1"
|
|
87, "a reference to a PI entity is allowed only in a context where a processing instruction could occur"
|
|
88, "a reference to a CDATA or SDATA entity is allowed only in a context where a data character could occur"
|
|
89, "a reference to a subdocument entity or external data entity is allowed only in a context where a data character could occur"
|
|
90, "a reference to a subdocument entity or external data entity is not allowed in replaceable character data"
|
|
91, "the number of open entities cannot exceed ENTLVL (%1)"
|
|
92, "a reference to a PI entity is not allowed in replaceable character data"
|
|
93, "entity %1 is already open"
|
|
94, "short reference map %1 not defined"
|
|
95, "short reference map in DTD must specify associated element type"
|
|
96, "short reference map in document instance cannot specify associated element type"
|
|
97, "short reference map %1 for element %2 not defined in DTD"
|
|
98, "%1 is not a short reference delimiter"
|
|
99, "short reference delimiter %1 already mapped in this declaration"
|
|
100, "no document element"
|
|
102, "entity end not allowed in processing instruction"
|
|
103, "length of processing instruction must not exceed PILEN (%1)"
|
|
104, "missing PIC delimiter"
|
|
105, "an attribute specification must start with a name or name token"
|
|
106, "%1 is not a member of a group specified for any attribute"
|
|
107, "the name and VI delimiter can be omitted from an attribute specification only if SHORTTAG YES is specified"
|
|
108, "there is no attribute %1"
|
|
109, "an attribute value specification must start with a literal or a name character"
|
|
110, "length of name token must not exceed NAMELEN (%1)"
|
|
111, "an attribute value literal can occur in an attribute specification list only after a VI delimiter"
|
|
112, "duplicate specification of attribute %1"
|
|
113, "duplicate definition of attribute %1"
|
|
114, "data attribute specification must be omitted if attribute specification list is empty"
|
|
115, "marked section end not in marked section declaration"
|
|
116, "number of open marked sections must not exceed TAGLVL (%1)"
|
|
117, "missing marked section end"
|
|
118, "marked section started here"
|
|
119, "entity end in character data, replaceable character data or ignored marked section"
|
|
120, "normalized length of attribute value literal must not exceed LITLEN (%1); length was %2"
|
|
121, "syntax of attribute value does not conform to declared value"
|
|
122, "character %1 is not allowed in the value of attribute %2"
|
|
123, "value of attribute %1 must be a single token"
|
|
124, "value of attribute %2 invalid: %1 cannot start a number token"
|
|
125, "value of attribute %2 invalid: %1 cannot start a name"
|
|
126, "non-impliable attribute %1 not specified but OMITTAG NO and SHORTTAG NO"
|
|
127, "required attribute %1 not specified"
|
|
128, "first occurrence of CURRENT attribute %1 not specified"
|
|
129, "%1 is not a notation name"
|
|
130, "%1 is not a general entity name"
|
|
131, "value of attribute %2 cannot be %1; must be one of %3"
|
|
132, "%1 is not a data or subdocument entity"
|
|
133, "content model is ambiguous: when no tokens have been matched, both the %2 and %3 occurrences of %1 are possible"
|
|
134, "content model is ambiguous: when the current token is the %2 occurrence of %1, both the %4 and %5 occurrences of %3 are possible"
|
|
135, "content model is ambiguous: when the current token is the %2 occurrence of %1 and the innermost containing AND group has been matched, both the %4 and %5 occurrences of %3 are possible"
|
|
136, "content model is ambiguous: when the current token is the %2 occurrence of %1 and the innermost %3 containing AND groups have been matched, both the %5 and %6 occurrences of %4 are possible"
|
|
137, "invalid comment declaration: found character %1 outside comment but inside comment declaration"
|
|
138, "comment declaration started here"
|
|
139, "non SGML character number %1"
|
|
140, "data or replaceable character data in declaration subset"
|
|
141, "ID %1 already defined"
|
|
142, "ID %1 first defined here"
|
|
143, "value of fixed attribute %1 not equal to default"
|
|
144, "character %1 is not significant in the reference concrete syntax and so cannot occur in a comment in the SGML declaration"
|
|
145, "minimum data of first minimum literal in SGML declaration must be ""ISO 8879:1986"" or ""ISO 8879:1986 (ENR)"" or ""ISO 8879:1986 (WWW)"" not %1"
|
|
146, "parameter before LCNMSTRT must be NAMING not %1"
|
|
147, "unexpected entity end in SGML declaration: only %1, S separators and comments allowed"
|
|
148, "%1 invalid: only %2 and parameter separators allowed"
|
|
149, "magnitude of %1 too big"
|
|
150, "character %1 is not significant in the reference concrete syntax and so cannot occur in a literal in the SGML declaration except as the replacement of a character reference"
|
|
151, "%1 is not a valid syntax reference character number"
|
|
152, "a parameter entity reference cannot occur in an SGML declaration"
|
|
153, "%1 invalid: only %2 and parameter separators are allowed"
|
|
154, "cannot continue because of previous errors"
|
|
155, "SGML declaration cannot be parsed because the character set does not contain characters having the following numbers in ISO 646: %1"
|
|
156, "the specified character set is invalid because it does not contain the minimum data characters having the following numbers in ISO 646: %1"
|
|
157, "character numbers declared more than once: %1"
|
|
158, "character numbers should have been declared UNUSED: %1"
|
|
159, "character numbers missing in base set: %1"
|
|
160, "characters in the document character set with numbers exceeding %1 not supported"
|
|
161, "invalid formal public identifier %1: missing //"
|
|
162, "invalid formal public identifier %1: no SPACE after public text class"
|
|
163, "invalid formal public identifier %1: invalid public text class"
|
|
164, "invalid formal public identifier %1: public text language must be a name containing only upper case letters"
|
|
165, "invalid formal public identifer %1: public text display version not permitted with this text class"
|
|
166, "invalid formal public identifier %1: extra field"
|
|
167, "public text class of public identifier in notation identifier must be NOTATION"
|
|
168, "base character set %1 is unknown"
|
|
169, "delimiter set is ambiguous: %1 and %2 can be recognized in the same mode"
|
|
170, "characters with the following numbers in the syntax reference character set are significant in the concrete syntax but are not in the document character set: %1"
|
|
171, "there is no unique character in the document character set corresponding to character number %1 in the syntax reference character set"
|
|
172, "there is no unique character in the internal character set corresponding to character number %1 in the syntax reference character set"
|
|
173, "the character with number %1 in ISO 646 is significant but has no representation in the syntax reference character set"
|
|
174, "capacity set %1 is unknown"
|
|
175, "capacity %1 already specified"
|
|
176, "value of capacity %1 exceeds value of TOTALCAP"
|
|
177, "syntax %1 is unknown"
|
|
178, "UCNMSTRT must have the same number of characters as LCNMSTRT"
|
|
179, "UCNMCHAR must have the same number of characters as LCNMCHAR"
|
|
180, "number of open subdocuments exceeds quantity specified for SUBDOC parameter in SGML declaration (%1)"
|
|
181, "entity %1 declared SUBDOC, but SUBDOC NO specified in SGML declaration"
|
|
182, "a parameter entity referenced in a parameter separator must end in the same declaration"
|
|
183, "reference to non-existent ID %1"
|
|
184, "generic identifier %1 used in DTD but not defined"
|
|
185, "%1 not finished but document ended"
|
|
186, "cannot continue with subdocument because of previous errors"
|
|
187, "no document type declaration; will parse without validation"
|
|
188, "no internal or external document type declaration subset; will parse without validation"
|
|
189, "this is not an SGML document"
|
|
190, "length of start-tag before interpretation of literals must not exceed TAGLEN (%1)"
|
|
191, "a parameter entity referenced in a token separator must end in the same group"
|
|
192, "the following character numbers are shunned characters that are not significant and so should have been declared UNUSED: %1"
|
|
193, "there is no unique character in the specified document character set corresponding to character number %1 in ISO 646"
|
|
194, "length of attribute value must not exceed LITLEN less NORMSEP (-%1)"
|
|
195, "length of tokenized attribute value must not exceed LITLEN less NORMSEP (-%1)"
|
|
196, "concrete syntax scope is INSTANCE but value of %1 quantity is less than value in reference quantity set"
|
|
197, "public text class of formal public identifier of base character set must be CHARSET"
|
|
198, "public text class of formal public identifier of capacity set must be CAPACITY"
|
|
199, "public text class of formal public identifier of concrete syntax must be SYNTAX"
|
|
200, "when there is an MSOCHAR there must also be an MSICHAR"
|
|
201, "character number %1 in the syntax reference character set was specified as a character to be switched but is not a markup character"
|
|
202, "character number %1 was specified as a character to be switched but is not in the syntax reference character set"
|
|
203, "character numbers %1 in the document character set have been assigned the same meaning, but this is the meaning of a significant character"
|
|
204, "character number %1 assigned to more than one function"
|
|
205, "%1 is already a function name"
|
|
206, "characters with the following numbers in ISO 646 are significant in the concrete syntax but are not in the document character set: %1"
|
|
207, "general delimiter %1 consists solely of function characters"
|
|
208, "letters assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1"
|
|
209, "digits assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1"
|
|
210, "character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is RE"
|
|
211, "character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is RS"
|
|
212, "character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is SPACE"
|
|
213, "separator characters assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1"
|
|
214, "character number %1 cannot be switched because it is a Digit, LC Letter or UC Letter"
|
|
215, "pointless for number of characters to be 0"
|
|
216, "%1 cannot be the replacement for a reference reserved name because it is another reference reserved name"
|
|
217, "%1 cannot be the replacement for a reference reserved name because it is the replacement of another reference reserved name"
|
|
218, "replacement for reserved name %1 already specified"
|
|
219, "%1 is not a valid name in the declared concrete syntax"
|
|
220, "%1 is not a valid short reference delimiter because it has more than one B sequence"
|
|
221, "%1 is not a valid short reference delimiter because it is adjacent to a character that can occur in a blank sequence"
|
|
222, "length of delimiter %1 exceeds NAMELEN (%2)"
|
|
223, "length of reserved name %1 exceeds NAMELEN (%2)"
|
|
224, "character numbers assigned to both LCNMCHAR or UCNMCHAR and LCNMSTRT or UCNMSTRT: %1"
|
|
225, "when the concrete syntax scope is INSTANCE the syntax reference character set of the declared syntax must be the same as that of the reference concrete syntax"
|
|
226, "end-tag minimization should be O for element with declared content of EMPTY"
|
|
227, "end-tag minimization should be O for element %1 because it has CONREF attribute"
|
|
228, "element %1 has a declared content of EMPTY and a CONREF attribute"
|
|
229, "element %1 has a declared content of EMPTY and a NOTATION attribute"
|
|
230, "declared value of data attribute cannot be ENTITY, ENTITIES, ID, IDREF, IDREFS or NOTATION"
|
|
231, "default value of data attribute cannot be CONREF or CURRENT"
|
|
232, "number of attribute names and name tokens (%1) exceeds ATTCNT (%2)"
|
|
233, "if the declared value is ID the default value must be IMPLIED or REQUIRED"
|
|
234, "the attribute definition list already declared attribute %1 as the ID attribute"
|
|
235, "the attribute definition list already declared attribute %1 as the NOTATION attribute"
|
|
236, "token %1 occurs more than once in attribute definition list"
|
|
237, "no attributes defined for notation %1"
|
|
238, "notation %1 for entity %2 undefined"
|
|
239, "entity %1 undefined in short reference map %2"
|
|
240, "notation %1 is undefined but had attribute definition"
|
|
241, "length of interpreted parameter literal in bracketed text plus the length of the bracketing delimiters must not exceed LITLEN (%1)"
|
|
242, "length of rank stem plus length of rank suffix must not exceed NAMELEN (%1)"
|
|
243, "document instance must start with document element"
|
|
244, "content model nesting level exceeds GRPLVL (%1)"
|
|
245, "grand total of content tokens exceeds GRPGTCNT (%1)"
|
|
246, "unclosed start-tag requires SHORTTAG YES"
|
|
247, "NET-enabling start-tag requires SHORTTAG YES"
|
|
248, "unclosed end-tag requires SHORTTAG YES"
|
|
249, "DTDs other than base allowed only if CONCUR YES or EXPLICIT YES"
|
|
250, "end of entity other than document entity after document element"
|
|
251, "%1 declaration illegal after document element"
|
|
252, "character reference illegal after document element"
|
|
253, "entity reference illegal after document element"
|
|
254, "marked section illegal after document element"
|
|
255, "the %1 occurrence of %2 in the content model for %3 cannot be excluded at this point because it is contextually required"
|
|
256, "the %1 occurrence of %2 in the content model for %3 cannot be excluded because it is neither inherently optional nor a member of an OR group"
|
|
257, "an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified"
|
|
258, "value cannot be specified both for notation attribute and content reference attribute"
|
|
259, "notation %1 already defined"
|
|
260, "short reference map %1 already defined"
|
|
261, "first defined here"
|
|
262, "general delimiter role %1 already defined"
|
|
263, "number of ID references in start-tag must not exceed GRPCNT (%1)"
|
|
264, "number of entity names in attribute specification list must not exceed GRPCNT (%1)"
|
|
265, "normalized length of attribute specification list must not exceed ATTSPLEN (%1); length was %2"
|
|
266, "short reference delimiter %1 already specified"
|
|
267, "single character short references were already specified for character numbers: %1"
|
|
268, "default entity used in entity attribute %1"
|
|
269, "reference to entity %1 uses default entity"
|
|
270, "entity %1 in short reference map %2 uses default entity"
|
|
271, "no DTD %1 declared"
|
|
272, "LPD %1 has neither internal nor external subset"
|
|
273, "element types have different link attribute definitions"
|
|
274, "link set %1 already defined"
|
|
275, "empty result attribute specification"
|
|
276, "no source element type %1"
|
|
277, "no result element type %1"
|
|
278, "end of document in LPD subset"
|
|
279, "%1 declaration not allowed in LPD subset"
|
|
280, "ID link set declaration not allowed in simple link declaration subset"
|
|
281, "link set declaration not allowed in simple link declaration subset"
|
|
282, "attributes can only be defined for base document element (not %1) in simple link declaration subset"
|
|
283, "a short reference mapping declaration is allowed only in the base DTD"
|
|
284, "a short reference use declaration is allowed only in the base DTD"
|
|
285, "default value of link attribute cannot be CURRENT or CONREF"
|
|
286, "declared value of link attribute cannot be ID, IDREF, IDREFS or NOTATION"
|
|
287, "only fixed attributes can be defined in simple LPD"
|
|
288, "only one ID link set declaration allowed in an LPD subset"
|
|
289, "no initial link set defined for LPD %1"
|
|
290, "notation %1 not defined in source DTD"
|
|
291, "result document type in simple link specification must be implied"
|
|
292, "simple link requires SIMPLE YES"
|
|
293, "implicit link requires IMPLICIT YES"
|
|
294, "explicit link requires EXPLICIT YES"
|
|
295, "LPD not allowed before first DTD"
|
|
296, "DTD not allowed after an LPD"
|
|
297, "definition of general entity %1 is unstable"
|
|
298, "definition of parameter entity %1 is unstable"
|
|
299, "multiple link rules for ID %1 but not all have link attribute specifications"
|
|
300, "multiple link rules for element type %1 but not all have link attribute specifications"
|
|
301, "link type %1 does not have a link set %2"
|
|
302, "link set use declaration for simple link process"
|
|
303, "no link type %1"
|
|
304, "both document type and link type %1"
|
|
305, "link type %1 already defined"
|
|
306, "document type %1 already defined"
|
|
307, "link set %1 used in LPD but not defined"
|
|
308, "#IMPLIED already linked to result element type %1"
|
|
309, "number of active simple link processes exceeds quantity specified for SIMPLE parameter in SGML declaration (%1)"
|
|
310, "only one chain of explicit link processes can be active"
|
|
311, "source document type name for link type %1 must be base document type since EXPLICIT YES 1"
|
|
312, "only one implicit link process can be active"
|
|
313, "sorry, link type %1 not activated: only one implicit or explicit link process can be active (with base document type as source document type)"
|
|
314, "name missing after name group in entity reference"
|
|
315, "source document type name for link type %1 must be base document type since EXPLICIT NO"
|
|
316, "link process must be activated before base DTD"
|
|
317, "unexpected entity end while starting second pass"
|
|
318, "type %1 of element with ID %2 not associated element type for applicable link rule in ID link set"
|
|
319, "DATATAG feature not implemented"
|
|
320, "generic identifier specification missing after document type specification in start-tag"
|
|
321, "generic identifier specification missing after document type specification in end-tag"
|
|
322, "a NET-enabling start-tag cannot include a document type specification"
|
|
323, "DTD did not contain element declaration for document type name"
|
|
324, "invalid default SGML declaration"
|
|
325, "reference to entity %1 for which no system identifier could be generated"
|
|
326, "entity was defined here"
|
|
327, "content model is mixed but does not allow #PCDATA everywhere"
|
|
328, "start or end of range must specify a single character"
|
|
329, "number of first character in range must not exceed number of second character in range"
|
|
330, "delimiter cannot be an empty string"
|
|
331, "too many characters assigned same meaning with minimum literal"
|
|
332, "earlier reference to entity %1 used default entity"
|
|
333, "empty start-tag"
|
|
334, "empty end-tag"
|
|
335, "unused short reference map %1"
|
|
336, "unused parameter entity %1"
|
|
337, "cannot generate system identifier for public text %1"
|
|
338, "cannot generate system identifier for general entity %1"
|
|
339, "cannot generate system identifier for parameter entity %1"
|
|
340, "cannot generate system identifier for document type %1"
|
|
341, "cannot generate system identifier for link type %1"
|
|
342, "cannot generate system identifier for notation %1"
|
|
343, "element type %1 both included and excluded"
|
|
344, "no document type declaration; implying %1"
|
|
345, "minimum data of AFDR declaration must be ""ISO/IEC 10744:1997"" not %1"
|
|
346, "AFDR declaration required before use of AFDR extensions"
|
|
347, "ENR extensions were used but minimum literal was not ""ISO 8879:1986 (ENR)"" or ""ISO 8879:1986 (WWW)"""
|
|
348, "illegal numeric character reference to non-SGML character %1 in literal"
|
|
349, "cannot convert character reference to number %1 because description %2 unrecognized"
|
|
350, "cannot convert character reference to number %1 because character %2 from baseset %3 unknown"
|
|
351, "character reference to number %1 cannot be converted because of problem with internal character set"
|
|
352, "cannot convert character reference to number %1 because character not in internal character set"
|
|
353, "Web SGML adaptations were used but minimum literal was not ""ISO 8879:1986 (WWW)"""
|
|
354, "token %1 can be value for multiple attributes so attribute name required"
|
|
355, "length of hex number must not exceed NAMELEN (%1)"
|
|
356, "%1 is not a valid name in the declared concrete syntax"
|
|
357, "CDATA declared content"
|
|
358, "RCDATA declared content"
|
|
359, "inclusion"
|
|
360, "exclusion"
|
|
361, "NUMBER or NUMBERS declared value"
|
|
362, "NAME or NAMES declared value"
|
|
363, "NUTOKEN or NUTOKENS declared value"
|
|
364, "CONREF attribute"
|
|
365, "CURRENT attribute"
|
|
366, "TEMP marked section"
|
|
367, "included marked section in the instance"
|
|
368, "ignored marked section in the instance"
|
|
369, "RCDATA marked section"
|
|
370, "processing instruction entity"
|
|
371, "bracketed text entity"
|
|
372, "internal CDATA entity"
|
|
373, "internal SDATA entity"
|
|
374, "external CDATA entity"
|
|
375, "external SDATA entity"
|
|
376, "attribute definition list declaration for notation"
|
|
377, "rank stem"
|
|
378, "no system id specified"
|
|
379, "comment in parameter separator"
|
|
380, "named character reference"
|
|
381, "AND group"
|
|
382, "attribute value not a literal"
|
|
383, "attribute name missing"
|
|
384, "element declaration for group of element types"
|
|
385, "attribute definition list declaration for group of element types"
|
|
386, "empty comment declaration"
|
|
387, "S separator in comment declaration"
|
|
388, "multiple comments in comment declaration"
|
|
389, "no status keyword"
|
|
390, "multiple status keywords"
|
|
391, "parameter entity reference in document instance"
|
|
392, "CURRENT attribute"
|
|
393, "element type minimization parameter"
|
|
394, "reference not terminated by REFC delimiter"
|
|
395, "#PCDATA not first in model group"
|
|
396, "#PCDATA in SEQ group"
|
|
397, "#PCDATA in nested model group"
|
|
398, "#PCDATA in model group that does not have REP occurrence indicator"
|
|
399, "name group or name token group used connector other than OR"
|
|
400, "processing instruction does not start with name"
|
|
401, "S separator in status keyword specification in document instance"
|
|
402, "reference to external data entity"
|
|
403, "reference to external entity in attribute value"
|
|
404, "character %1 is the first character of a delimiter but occurred as data"
|
|
405, "SGML declaration was not implied"
|
|
406, "marked section in internal DTD subset"
|
|
407, "NET-enabling start-tag not immediately followed by null end-tag"
|
|
408, "entity end in different element from entity reference"
|
|
409, "NETENABL IMMEDNET requires EMPTYNRM YES"
|
|
410, "reference to non-SGML character"
|
|
411, "declaration of default entity"
|
|
412, "reference to parameter entity in parameter separator in internal subset"
|
|
413, "reference to parameter entity in token separator in internal subset"
|
|
414, "reference to parameter entity in parameter literal in internal subset"
|
|
415, "cannot generate system identifier for SGML declaration reference"
|
|
416, "public text class of formal public identifier of SGML declaration must be SD"
|
|
417, "SGML declaration reference was used but minimum literal was not ""ISO 8879:1986 (WWW)"""
|
|
418, "member of model group containing #PCDATA has occurrence indicator"
|
|
419, "member of model group containing #PCDATA is a model group"
|
|
420, "reference to non-predefined entity"
|
|
421, "reference to external entity"
|
|
422, "declaration of default entity conflicts with IMPLYDEF ENTITY YES"
|
|
423, "parsing with respect to more than one active doctype not supported"
|
|
424, "cannot have active doctypes and link types at the same time"
|
|
425, "number of concurrent document instances exceeds quantity specified for CONCUR parameter in SGML declaration (%1)"
|
|
426, "datatag group can only be specified in base document type"
|
|
427, "element not in the base document type can't have an empty start-tag"
|
|
428, "element not in base document type can't have an empty end-tag"
|
|
429, "immediately recursive element"
|
|
430, "invalid URN %1: missing "":"""
|
|
431, "invalid URN %1: missing ""urn:"" prefix"
|
|
432, "invalid URN %1: invalid namespace identifier"
|
|
433, "invalid URN %1: invalid namespace specific string"
|
|
434, "invalid URN %1: extra field"
|
|
435, "prolog can't be omitted unless CONCUR NO and LINK EXPLICIT NO and either IMPLYDEF ELEMENT YES or IMPLYDEF DOCTYPE YES"
|
|
436, "can't determine name of #IMPLIED document element"
|
|
437, "can't use #IMPLICIT doctype unless CONCUR NO and LINK EXPLICIT NO"
|
|
438, "Sorry, #IMPLIED doctypes not implemented"
|
|
439, "reference to DTD data entity ignored"
|
|
440, "notation %1 for parameter entity %2 undefined"
|
|
441, "notation %1 for external subset undefined"
|
|
442, "attribute %1 can't be redeclared"
|
|
443, "#IMPLICIT attributes have already been specified for notation %1"
|
|
444, "a name group is not allowed in a parameter entity reference in a start tag"
|
|
445, "name group in a parameter entity reference in an end tag (SGML forbids them in start tags)"
|
|
446, "if the declared value is NOTATION a default value of CONREF is useless"
|
|
447, "Sorry, #ALL and #IMPLICIT content tokens not implemented"
|
|
1000, "delimiter "
|
|
1002, "digit"
|
|
1003, "name start character"
|
|
1004, "sepchar"
|
|
1005, "separator"
|
|
1006, "name character"
|
|
1007, "data character"
|
|
1008, "minimum data character"
|
|
1009, "significant character"
|
|
1010, "record end character"
|
|
1011, "record start character"
|
|
1012, "space character"
|
|
1013, ", "
|
|
1014, "-"
|
|
1015, "parameter literal"
|
|
1016, "data tag group"
|
|
1017, "model group"
|
|
1018, "data tag template group"
|
|
1019, "name"
|
|
1020, "name token"
|
|
1021, "element token"
|
|
1022, "inclusions"
|
|
1023, "exclusions"
|
|
1024, "minimum literal"
|
|
1025, "attribute value literal"
|
|
1026, "system identifier"
|
|
1027, "number"
|
|
1028, "attribute value"
|
|
1029, "name of capacity"
|
|
1030, "name of general delimiter role"
|
|
1031, "reference reserved name"
|
|
1032, "name of quantity"
|
|
1033, "entity end"
|
|
1034, "short reference delimiter"
|
|
END
|