[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
# SPDX-License-Identifier: AGPL-3.0-or-later
|
2021-05-24 15:16:51 +00:00
|
|
|
# lint: pylint
|
2021-09-07 11:34:35 +00:00
|
|
|
# pylint: disable=missing-module-docstring, global-statement
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
import asyncio
|
|
|
|
import logging
|
2023-03-19 09:47:49 +00:00
|
|
|
import random
|
2022-01-17 08:04:51 +00:00
|
|
|
from ssl import SSLContext
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
import threading
|
2022-01-17 08:04:51 +00:00
|
|
|
from typing import Any, Dict
|
2021-08-07 16:48:01 +00:00
|
|
|
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
import httpx
|
|
|
|
from httpx_socks import AsyncProxyTransport
|
2021-12-27 08:26:22 +00:00
|
|
|
from python_socks import parse_proxy_url, ProxyConnectionError, ProxyTimeoutError, ProxyError
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
from searx import logger
|
|
|
|
|
|
|
|
# Optional uvloop (support Python 3.6)
|
|
|
|
try:
|
|
|
|
import uvloop
|
|
|
|
except ImportError:
|
|
|
|
pass
|
|
|
|
else:
|
|
|
|
uvloop.install()
|
|
|
|
|
|
|
|
|
2021-08-07 16:48:01 +00:00
|
|
|
logger = logger.getChild('searx.network.client')
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
LOOP = None
|
2022-01-17 08:04:51 +00:00
|
|
|
SSLCONTEXTS: Dict[Any, SSLContext] = {}
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
|
2023-03-19 09:47:49 +00:00
|
|
|
def shuffle_ciphers(ssl_context):
|
|
|
|
"""Shuffle httpx's default ciphers of a SSL context randomly.
|
|
|
|
|
|
|
|
From `What Is TLS Fingerprint and How to Bypass It`_
|
|
|
|
|
|
|
|
> When implementing TLS fingerprinting, servers can't operate based on a
|
|
|
|
> locked-in whitelist database of fingerprints. New fingerprints appear
|
|
|
|
> when web clients or TLS libraries release new versions. So, they have to
|
|
|
|
> live off a blocklist database instead.
|
|
|
|
> ...
|
|
|
|
> It's safe to leave the first three as is but shuffle the remaining ciphers
|
|
|
|
> and you can bypass the TLS fingerprint check.
|
|
|
|
|
|
|
|
.. _What Is TLS Fingerprint and How to Bypass It:
|
|
|
|
https://www.zenrows.com/blog/what-is-tls-fingerprint#how-to-bypass-tls-fingerprinting
|
|
|
|
|
|
|
|
"""
|
|
|
|
c_list = httpx._config.DEFAULT_CIPHERS.split(':') # pylint: disable=protected-access
|
|
|
|
sc_list, c_list = c_list[:3], c_list[3:]
|
|
|
|
random.shuffle(c_list)
|
|
|
|
ssl_context.set_ciphers(":".join(sc_list + c_list))
|
|
|
|
|
|
|
|
|
2021-05-05 18:06:40 +00:00
|
|
|
def get_sslcontexts(proxy_url=None, cert=None, verify=True, trust_env=True, http2=False):
|
|
|
|
key = (proxy_url, cert, verify, trust_env, http2)
|
|
|
|
if key not in SSLCONTEXTS:
|
|
|
|
SSLCONTEXTS[key] = httpx.create_ssl_context(cert, verify, trust_env, http2)
|
2023-03-19 09:47:49 +00:00
|
|
|
shuffle_ciphers(SSLCONTEXTS[key])
|
2021-05-05 18:06:40 +00:00
|
|
|
return SSLCONTEXTS[key]
|
|
|
|
|
|
|
|
|
2021-08-07 16:48:01 +00:00
|
|
|
class AsyncHTTPTransportNoHttp(httpx.AsyncHTTPTransport):
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
"""Block HTTP request"""
|
|
|
|
|
2021-12-11 12:17:04 +00:00
|
|
|
async def handle_async_request(self, request):
|
2021-08-07 16:48:01 +00:00
|
|
|
raise httpx.UnsupportedProtocol('HTTP protocol is disabled')
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
|
|
|
|
class AsyncProxyTransportFixed(AsyncProxyTransport):
|
|
|
|
"""Fix httpx_socks.AsyncProxyTransport
|
|
|
|
|
2021-12-11 12:17:04 +00:00
|
|
|
Map python_socks exceptions to httpx.ProxyError exceptions
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
"""
|
|
|
|
|
2021-12-11 12:17:04 +00:00
|
|
|
async def handle_async_request(self, request):
|
|
|
|
try:
|
|
|
|
return await super().handle_async_request(request)
|
|
|
|
except ProxyConnectionError as e:
|
|
|
|
raise httpx.ProxyError("ProxyConnectionError: " + e.strerror, request=request) from e
|
|
|
|
except ProxyTimeoutError as e:
|
|
|
|
raise httpx.ProxyError("ProxyTimeoutError: " + e.args[0], request=request) from e
|
|
|
|
except ProxyError as e:
|
|
|
|
raise httpx.ProxyError("ProxyError: " + e.args[0], request=request) from e
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
|
|
|
|
def get_transport_for_socks_proxy(verify, http2, local_address, proxy_url, limit, retries):
|
|
|
|
# support socks5h (requests compatibility):
|
|
|
|
# https://requests.readthedocs.io/en/master/user/advanced/#socks
|
|
|
|
# socks5:// hostname is resolved on client side
|
|
|
|
# socks5h:// hostname is resolved on proxy side
|
|
|
|
rdns = False
|
|
|
|
socks5h = 'socks5h://'
|
|
|
|
if proxy_url.startswith(socks5h):
|
2021-12-27 08:26:22 +00:00
|
|
|
proxy_url = 'socks5://' + proxy_url[len(socks5h) :]
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
rdns = True
|
|
|
|
|
|
|
|
proxy_type, proxy_host, proxy_port, proxy_username, proxy_password = parse_proxy_url(proxy_url)
|
2022-07-19 21:40:11 +00:00
|
|
|
verify = get_sslcontexts(proxy_url, None, verify, True, http2) if verify is True else verify
|
2021-05-24 15:44:43 +00:00
|
|
|
return AsyncProxyTransportFixed(
|
2021-12-27 08:26:22 +00:00
|
|
|
proxy_type=proxy_type,
|
|
|
|
proxy_host=proxy_host,
|
|
|
|
proxy_port=proxy_port,
|
|
|
|
username=proxy_username,
|
|
|
|
password=proxy_password,
|
2021-05-24 15:44:43 +00:00
|
|
|
rdns=rdns,
|
|
|
|
loop=get_loop(),
|
|
|
|
verify=verify,
|
|
|
|
http2=http2,
|
|
|
|
local_address=local_address,
|
2021-12-11 12:17:04 +00:00
|
|
|
limits=limit,
|
2021-05-24 15:44:43 +00:00
|
|
|
retries=retries,
|
|
|
|
)
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
|
|
|
|
def get_transport(verify, http2, local_address, proxy_url, limit, retries):
|
2022-07-19 21:40:11 +00:00
|
|
|
verify = get_sslcontexts(None, None, verify, True, http2) if verify is True else verify
|
2021-12-11 12:17:04 +00:00
|
|
|
return httpx.AsyncHTTPTransport(
|
2021-05-24 15:16:51 +00:00
|
|
|
# pylint: disable=protected-access
|
|
|
|
verify=verify,
|
|
|
|
http2=http2,
|
|
|
|
limits=limit,
|
2021-12-11 12:17:04 +00:00
|
|
|
proxy=httpx._config.Proxy(proxy_url) if proxy_url else None,
|
|
|
|
local_address=local_address,
|
2021-05-24 15:16:51 +00:00
|
|
|
retries=retries,
|
|
|
|
)
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
|
2021-05-24 15:16:51 +00:00
|
|
|
def new_client(
|
2021-12-27 08:26:22 +00:00
|
|
|
# pylint: disable=too-many-arguments
|
|
|
|
enable_http,
|
|
|
|
verify,
|
|
|
|
enable_http2,
|
|
|
|
max_connections,
|
|
|
|
max_keepalive_connections,
|
|
|
|
keepalive_expiry,
|
|
|
|
proxies,
|
|
|
|
local_address,
|
|
|
|
retries,
|
|
|
|
max_redirects,
|
|
|
|
hook_log_response,
|
|
|
|
):
|
2021-05-24 15:44:43 +00:00
|
|
|
limit = httpx.Limits(
|
|
|
|
max_connections=max_connections,
|
|
|
|
max_keepalive_connections=max_keepalive_connections,
|
2021-12-27 08:26:22 +00:00
|
|
|
keepalive_expiry=keepalive_expiry,
|
2021-05-24 15:44:43 +00:00
|
|
|
)
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
# See https://www.python-httpx.org/advanced/#routing
|
|
|
|
mounts = {}
|
2021-08-18 06:39:13 +00:00
|
|
|
for pattern, proxy_url in proxies.items():
|
|
|
|
if not enable_http and pattern.startswith('http://'):
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
continue
|
2021-12-27 08:26:22 +00:00
|
|
|
if proxy_url.startswith('socks4://') or proxy_url.startswith('socks5://') or proxy_url.startswith('socks5h://'):
|
2021-05-24 15:44:43 +00:00
|
|
|
mounts[pattern] = get_transport_for_socks_proxy(
|
|
|
|
verify, enable_http2, local_address, proxy_url, limit, retries
|
|
|
|
)
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
else:
|
2021-12-27 08:26:22 +00:00
|
|
|
mounts[pattern] = get_transport(verify, enable_http2, local_address, proxy_url, limit, retries)
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
if not enable_http:
|
|
|
|
mounts['http://'] = AsyncHTTPTransportNoHttp()
|
|
|
|
|
|
|
|
transport = get_transport(verify, enable_http2, local_address, None, limit, retries)
|
2021-09-06 19:42:30 +00:00
|
|
|
|
|
|
|
event_hooks = None
|
|
|
|
if hook_log_response:
|
2021-12-27 08:26:22 +00:00
|
|
|
event_hooks = {'response': [hook_log_response]}
|
2021-09-06 19:42:30 +00:00
|
|
|
|
|
|
|
return httpx.AsyncClient(
|
|
|
|
transport=transport,
|
|
|
|
mounts=mounts,
|
|
|
|
max_redirects=max_redirects,
|
|
|
|
event_hooks=event_hooks,
|
|
|
|
)
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
|
2021-04-27 08:03:19 +00:00
|
|
|
def get_loop():
|
|
|
|
return LOOP
|
|
|
|
|
|
|
|
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
def init():
|
|
|
|
# log
|
2023-08-12 14:57:00 +00:00
|
|
|
for logger_name in (
|
|
|
|
'httpx',
|
|
|
|
'httpcore.proxy',
|
|
|
|
'httpcore.connection',
|
|
|
|
'httpcore.http11',
|
|
|
|
'httpcore.http2',
|
|
|
|
'hpack.hpack',
|
|
|
|
'hpack.table',
|
|
|
|
):
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
logging.getLogger(logger_name).setLevel(logging.WARNING)
|
|
|
|
|
|
|
|
# loop
|
|
|
|
def loop_thread():
|
|
|
|
global LOOP
|
|
|
|
LOOP = asyncio.new_event_loop()
|
|
|
|
LOOP.run_forever()
|
|
|
|
|
2021-05-24 15:16:51 +00:00
|
|
|
thread = threading.Thread(
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
target=loop_thread,
|
|
|
|
name='asyncio_loop',
|
|
|
|
daemon=True,
|
|
|
|
)
|
2021-05-24 15:16:51 +00:00
|
|
|
thread.start()
|
[httpx] replace searx.poolrequests by searx.network
settings.yml:
* outgoing.networks:
* can contains network definition
* propertiers: enable_http, verify, http2, max_connections, max_keepalive_connections,
keepalive_expiry, local_addresses, support_ipv4, support_ipv6, proxies, max_redirects, retries
* retries: 0 by default, number of times searx retries to send the HTTP request (using different IP & proxy each time)
* local_addresses can be "192.168.0.1/24" (it supports IPv6)
* support_ipv4 & support_ipv6: both True by default
see https://github.com/searx/searx/pull/1034
* each engine can define a "network" section:
* either a full network description
* either reference an existing network
* all HTTP requests of engine use the same HTTP configuration (it was not the case before, see proxy configuration in master)
2021-04-05 08:43:33 +00:00
|
|
|
|
|
|
|
|
|
|
|
init()
|