gstreamer/docs/fwg/gst-plugin-writers-guide.xml
Steve Baker 99e581dc94 first cut of documentation for dparams for plugin writers.
Original commit message from CVS:
first cut of documentation for dparams for plugin writers.
who would have thought that writing docs was so much fun
2002-03-10 19:57:31 +00:00

878 lines
31 KiB
XML

<?xml version='1.0'?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
<!ENTITY % magic-entities SYSTEM "magic">
%magic-entities;
<!ENTITY TITLEPAGE SYSTEM "titlepage.xml">
<!ENTITY INTRO SYSTEM "intro.xml">
<!ENTITY TESTAPP SYSTEM "testapp.xml">
<!ENTITY LOOPBASED SYSTEM "loopbased.xml">
<!ENTITY BUFFERS SYSTEM "buffers.xml">
<!ENTITY SRCNSINK SYSTEM "srcnsink.xml">
<!ENTITY STATEMANAGE SYSTEM "statemanage.xml">
<!ENTITY CHECKLIST SYSTEM "checklist.xml">
<!ENTITY DPARAMS SYSTEM "dparams.xml">
<!ENTITY GStreamer "<application>GStreamer</application>">
]>
<book id="index">
&TITLEPAGE;
<!-- ############# part ############### -->
<part id="introduction"><title>Introduction</title>
<partintro>
<para>
&GStreamer; is a framework for creating
streaming media applications. It is extremely powerful and versatile,
and this versatility stems in part from its modularity, and its ability
to incorporate new modules seamlessly into its framework.
This document describes how to extend the capabilities of
&GStreamer; by creating new plugins.
</para>
<para>
It first describes the concepts required and the ways in which
&GStreamer; can be extended. It then goes
through a worked example of how to write a simple filter (for data
processing), and how to test and debug it. More advanced concepts are
then introduced, with worked examples of each. Next, writing source
and sink elements (for performing input and output) is discussed.
Finally, checklists of things to be sure to do when extending
&GStreamer; are presented.
</para>
</partintro>
&INTRO;
</part>
<!-- ############ part ############# -->
<part id="basic-concepts"><title>Basic concepts</title>
<partintro>
<para>
This section introduces the basic concepts required to understand the
issues involved in extending &GStreamer;
</para>
<para>
Many of these concepts are explained in greater detail in the
GStreamer Application Development Manual, and are merely mentioned
here to refresh your memory.
</para>
</partintro>
<chapter id="cha-plugins">
<title>Plugins</title>
<para>
Extensions to &GStreamer; can be made using a plugin mechanism. This is
used extensively in &GStreamer; even if only the standard package is
being used: a few very basic functions reside in the core library, and
all others are implemented in plugins.
</para>
<para>
Plugins are only loaded when needed: a plugin registry is used to
store the details of the plugins so that it is not neccessary to load
all plugins to determine which are needed.
This registry needs to be updated whenever a new plugin is added to the
system: see the <emphasis>gstreamer-register</emphasis> utility and the
documentation in the <emphasis>GStreamer Application Development
Manual</emphasis> for more details.
</para>
<para>
User extensions to &GStreamer; can be installed in the main plugin
directory, and will immediately be available for use in applications.
<emphasis>gstreamer-register</emphasis> should be run to update
the repository: but the system should work correctly even if it hasn't
been - it will just take longer to load the correct plugin.
</para>
<para>
User specific plugin directories and registries will be available
in future versions of &GStreamer;.
</para>
</chapter>
<chapter id="cha-elements">
<title>Elements</title>
<para>
Elements are at the core of &GStreamer;. Without elements, &GStreamer;
is just
a bunch of pipe fittings with nothing to connect. A large number of
elements (filters, sources and sinks) ship with &GStreamer;, but extra
elements can also be written.
</para>
<para>
An element may be constructed in several different ways, but all must
conform to the same basic rules. A simple filter may be built with the
FilterFactory, where the only code that need be written is the actual
filter code. A more complex filter, or a source or sink, will need to
be written out fully for complete access to the features and
performance possible with &GStreamer;.
</para>
<para>
The implementation of a new element will be contained in a plugin:
a single plugin may contain the implementation of several elements, or
just a single one.
</para>
</chapter>
<chapter id="cha-buffers">
<title>Buffers</title>
<para>
Buffers are structures used to pass data between elements. All streams
of data are chopped up into chunks which are stored in buffers.
Buffers can be of any size, and also contain metadata indicating the
type of data contained in them. Buffers can be allocated by various
different schemes, and may either be passed on by elements or
unreferenced (and the memory used by the buffer freed).
</para>
</chapter>
<chapter id="cha-typing">
<title>Typing and Properties</title>
<para>
A type system is used to ensure that the data passed between elements
is in a recognised format, and that the various parameters required
to fully specify that format match up correctly. Each connection
that is made between elements has a specified type. This is related,
but different, to the metadata in buffers which describes the type
of data in that particular buffer. See later in this document for
details of the available types.
</para>
</chapter>
<chapter id="cha-metadata">
<title>Metadata</title>
<para>
</para>
</chapter>
<chapter id="cha-scheduling">
<title>Scheduling</title>
<para>
</para>
</chapter>
<chapter id="cha-chainloop">
<title>Chain vs Loop Elements</title>
<para>
</para>
</chapter>
<chapter id="cha-autopluggers">
<title>Autopluggers</title>
<para>
&GStreamer; has an autoplugging mechanism, which enables application
writers to simply specify start and end elements for a path, and
the system will then create a path which links these elements,
in accordance with the type information provided by the elements.
</para>
<para>
It is possible to devise many different schemes for generating such
pathways, perhaps to optimise based on special criteria, or with
some specific constraints. It is thus possible to define new
autoplugging systems, using the plugin system.
</para>
</chapter>
</part>
<!-- ############ part ############# -->
<part id="typesnprops"><title>Types and Properties</title>
<partintro>
<para>
There is a very large set of possible types that may be used to
pass data between elements. Indeed, each new element that is defined
may use a new data format (though unless at least one other element
recognises that format, it will be most likely be useless since
nothing will be able to link with it).
</para>
<para>
In order for types to be useful, and for systems like autopluggers to
work, it is neccessary that all elements
agree on the type definitions, and which properties are required
for each type. The &GStreamer; framework itself
simply provides the ability to define types and parameters, but does
not fix the meaning of types and parameters, and does not enforce
standards on the creation of new types. This is a matter for
a policy to decide, not technical systems to enforce.
</para>
<para>
For now, the policy is simple:
<itemizedlist>
<listitem>
<para>
Do not create a new type if you could use one which already
exists.
</para>
</listitem>
<listitem>
<para>
If creating a new type, discuss it first with the other
&GStreamer; developers, on at least one of: IRC, mailing lists,
the &GStreamer; wiki.
</para>
</listitem>
<listitem>
<para>
Try to ensure that the name for a new format is as unlikely to
conflict with anything else created already, and is not a more
generalised name than it should be. For example:
"audio/compressed" would be too generalised a name to represent
audio data compressed with an mp3 codec. Instead "audio/mp3"
might be an appropriate name, or "audio/compressed" could exist
and have a property indicating the type of compression used.
</para>
</listitem>
<listitem>
<para>
Ensure that, when you do create a new type, you specify it
clearly, and get it added to the list of known types so that
other developers can use the type correctly when writing their
elements.
</para>
</listitem>
</itemizedlist>
</para>
</partintro>
<chapter id="cha-basic-types">
<title>The basic types</title>
<para>
This is a list of the basic types used for buffers. For each type, we
give the name ("mime type") of the type, the list of properties which
are associated with the type, the meaning of each property, and the
purpose of the type.
</para>
<itemizedlist>
<listitem>
<para>
<emphasis>audio/raw</emphasis>
- Unstructured and uncompressed raw audio data.
</para><para>
<emphasis>rate</emphasis>
- The sample rate of the data, in samples per second.
</para><para>
<emphasis>channels</emphasis>
- The number of channels of audio data.
</para><para>
<emphasis>format</emphasis>
- This describes the format in which the audio data is passed.
This is a string for which there are currently two valid values:
"int" for integer data and "float" for floating point data.
</para><para>
<emphasis>law</emphasis>
- Valid only if format=int. The law used to describe the data.
This is an integer for which there are three valid values: 0 for
linear, 1 for mu law, 2 for A law.
</para><para>
<emphasis>endianness</emphasis>
- Valid only if format=int. The order of bytes in a sample. This
is a boolean: 0 means little-endian (ie, bytes are least
significant first), 1 means big-endian (ie, most significant byte
first).
</para><para>
<emphasis>signed</emphasis>
- Valid only if format=int. Whether the samples are signed or not.
This is a boolean: 0 means unsigned, 1 means signed.
</para><para>
<emphasis>width</emphasis>
- Valid only if format=int. The number of bits per sample. This
is extremely likely to be a multiple of 8, but as ever this is up
to each element supporting this format to specify.
</para><para>
<emphasis>depth</emphasis>
- Valid only if format=int. The number of bits used per sample.
This must be less than or equal to the width: if less than the
width, the low bits are assumed to be the ones used. For example,
width=32, depth=24 means that each sample is stored in a 32 bit
word, but only the low 24 bits are actually used.
</para><para>
<emphasis>layout</emphasis>
- Valid only if format=float. A string representing the way in
which the floating point data is represented. For now, the only
valid value is gfloat, meaning that the data is passed as a series
of gfloat values.
</para><para>
<emphasis>intercept</emphasis>
- Valid only if format=float. A floating point value representing
the value that the signal "centres" on.
</para><para>
<emphasis>slope</emphasis>
- Valid only if format=float. A floating point value representing
how far the signal deviates from the intercept. So a slope of 1.0
and an intercept of 0.0 would mean an audio signal with minimum
and maximum values of -1.0 and 1.0. A slope of 0.5 and intercept
of 0.5 would represent values in the range 0.0 to 1.0.
</para>
<para>
For example: 16 bit integer, unsigned, linear, monophonic, big-endian,
44100KHz audio would be represented by
"format=int,law=0,endianness=1,signed=0,width=16,depth=16,rate=44100,channels=1"
and floating point, using gfloat's, in the range -1.0 to 1.0,
8000KHz stereo audio would be represented by
"format=float,layout=gfloat,intercept=0.0,slope=1.0,rate=8000,channels=2"
</para>
</listitem>
</itemizedlist>
<itemizedlist>
<listitem>
<para>
<emphasis>audio/mp3</emphasis>
- Audio data compressed using the mp3 encoding scheme.
</para><para>
<emphasis>framed</emphasis>
- This is a boolean. If true (1), each buffer contains exactly
one frame. If false (0), frames and buffers do not (necessarily)
match up. If the data is not framed, the values of some of the
properties will not be available, but others will be assumed to
be constant throughout the file, or may be found in other ways.
</para><para>
<emphasis>layer</emphasis>
- The compression scheme layer used to compress the data.
This is an integer, and can currently have the value 1, 2
or 3.
</para><para>
<emphasis>bitrate</emphasis>
- The bitrate, in kilobits per second.
For VBR (variable bitrate) mp3 data, this is the average bitrate.
</para><para>
<emphasis>channels</emphasis>
- The number of channels of audio data present. This could
theoretically be any integer greater than 0, but in practice will
be either 1 or 2.
</para><para>
<emphasis>joint-stereo</emphasis>
- Boolean. If true, channels must not be zero. If true, this
implies that stereo data is stored as a combined signal and
the difference between the signals, rather than as two entirely
separate signals.
</para><para>
There are many other properties relevant for
<emphasis>audio/mp3</emphasis> data: these may be added to this
specification at a later date.
</para>
</listitem>
</itemizedlist>
<itemizedlist>
<listitem>
<para>
<emphasis>audio/x-ogg</emphasis>
- Audio data compressed using the Ogg Vorbis encoding scheme.
There are currently no parameters defined for this type. FIXME.
</para>
</listitem>
</itemizedlist>
<itemizedlist>
<listitem>
<para>
<emphasis>video/raw</emphasis>
- Raw video data.
</para><para>
<emphasis>fourcc</emphasis>
- A FOURCC code identifying the format in which this data is
stored. FOURCC (Four Character Code) is a simple system to
allow unambiguous identification of a video datastream format.
See <ulink
url="http://www.webartz.com/fourcc/"
type="http">http://www.webartz.com/fourcc/</ulink>
</para><para>
<emphasis>width</emphasis>
- The number of pixels wide that each video frame is.
</para><para>
<emphasis>height</emphasis>
- The number of pixels high that each video frame is.
</para>
</listitem>
</itemizedlist>
<itemizedlist>
<listitem>
<para>
<emphasis>video/mpeg</emphasis>
- Video data compressed using an mpeg encoding scheme.
</para><para>
<emphasis>mpegversion</emphasis>
</para><para>
<emphasis>systemstream</emphasis>
</para>
</listitem>
</itemizedlist>
<itemizedlist>
<listitem>
<para>
<emphasis>video/avi</emphasis>
- Video data compressed using the AVI encoding scheme.
There are currently no parameters defined for this type. FIXME.
</para>
</listitem>
</itemizedlist>
</chapter>
<chapter id="cha-types-test">
<title>Building a simple format for testing</title>
<para>
</para>
</chapter>
<chapter id="cha-types-simplemime">
<title>A simple MIME type</title>
<para>
</para>
</chapter>
<chapter id="cha-types-props">
<title>Type properties</title>
<para>
</para>
</chapter>
<chapter id="cha-types-typefind">
<title>Typefind functions and autoplugging</title>
<para>
</para>
</chapter>
</part>
<!-- ############ part ############# -->
<part id="first-plugin"><title>Building our first plugin</title>
<partintro>
<para>
We are now have the neccessary concepts to build our first plugin.
We are going to build an element which has a single input pad and
a single output pad, and simply passes anything it reads on
the input pad through and out on the output pad. We will also
see where we could add code to convert this plugin into something
more useful.
</para>
<para>
The example code used in this section can be found in
<filename>examples/plugins/</filename>
</para>
</partintro>
<chapter id="cha-boilerplate">
<title>Constructing the boilerplate</title>
<para>
The first thing to do when making a new element is to specify some basic
details about it: what its name is, who wrote it, what version number it
is, etc. We also need to define an object to represent the element and to
store the data the element needs. I shall refer to these details
collectively as the <emphasis>boilerplate</emphasis>.
</para>
<sect1 id="sect-boilerplate-gobject">
<title>Doing it the hard way with GstObject</title>
<para>
The standard way of defining the boilerplate is simply to write some
code, and fill in some structures. The easiest way to do this is to
copy an example and modify according to your needs.
</para>
<para>
First we will examine the code you would be likely to place in a header
file (although since the interface to the code is entirely defined
by the pluging system, and doesn't depend on reading a header file,
this is not crucial.)
The code here can be found in
<filename>examples/plugins/example.h</filename>
</para>
<programlisting>
/* Definition of structure storing data for this element. */
typedef struct _GstExample GstExample;
struct _GstExample {
GstElement element;
GstPad *sinkpad,*srcpad;
gint8 active;
};
/* Standard definition defining a class for this element. */
typedef struct _GstExampleClass GstExampleClass;
struct _GstExampleClass {
GstElementClass parent_class;
};
/* Standard macros for defining types for this element. */
#define GST_TYPE_EXAMPLE \
(gst_example_get_type())
#define GST_EXAMPLE(obj) \
(GTK_CHECK_CAST((obj),GST_TYPE_EXAMPLE,GstExample))
#define GST_EXAMPLE_CLASS(klass) \
(GTK_CHECK_CLASS_CAST((klass),GST_TYPE_EXAMPLE,GstExample))
#define GST_IS_EXAMPLE(obj) \
(GTK_CHECK_TYPE((obj),GST_TYPE_EXAMPLE))
#define GST_IS_EXAMPLE_CLASS(obj) \
(GTK_CHECK_CLASS_TYPE((klass),GST_TYPE_EXAMPLE))
/* Standard function returning type information. */
GtkType gst_example_get_type(void);
</programlisting>
</sect1>
<sect1 id="sect-boilerplate-filterfactory">
<title>Doing it the easy way with FilterFactory</title>
<para>
A plan for the future is to create a FilterFactory, to make the
process of making a new filter a simple process of specifying a few
details, and writing a small amount of code to perform the actual
data processing.
</para>
<para>
Unfortunately, this hasn't yet been implemented. It is also likely
that when it is, it will not be possible to cover all the possibilities
available by writing the boilerplate yourself, so some plugins will
always need to be manually registered.
</para>
<para>
As a rough outline of what is planned: the FilterFactory will take a
list of appropriate function pointers, and data structures to define
a filter. With a reasonable measure of preprocessor magic, the
plugin writer will then simply need to provide definitions of the
functions and data structures desired, and a name for the filter, and
then call a macro from within plugin_init() which will register the
new filter. All the fluff that goes into the definition of a filter
will thus be hidden from view.
</para>
<para>
Ideally, we will come up with a way for various FilterFactory-provided
functions to be overridden, to the point where you can construct
almost the most complex stuff with it, it just saves typing.
</para>
<para>
Of course, the filter factory can be used to create sources and sinks
too: simply create a filter with only source or sink pads.
</para>
<para>
You may be thinking that this should really be called an
ElementFactory. Well, we agree, but there is already something else
justifiably ealled an ElementFactory (this is the thing which actually
makes instances of elements). There is also already something called
a PluginFactory. We just have too many factories and not enough words.
And since this isn't yet written, it doesn't get priority for claiming
a name.
</para>
</sect1>
</chapter>
<chapter id="cha-defineelt">
<title>Defining an element</title>
<para>
A new element is defined by creating an element factory. This is a
structure containing all the information needed to create an instance
of the element. Creating a factory requires two things: a type for
the element to be created
(this was defined in the boilerplate above: FIXME - reorganise),
and a GstElementDetails structure, which contains some
general information about the element to be created.
</para>
<sect1 id="sect-defineelt-eltdetails">
<title>GstElementDetails</title>
<para>
The GstElementDetails structure gives a heirarchical type for
the element, a human-readable description of the element, as
well as author and version data. The entries are:
</para>
<itemizedlist>
<listitem><para>
A long, english, name for the element.
</para></listitem><listitem><para>
The type of the element, as a heirarchy. The heirarchy is defined
by specifying the top level category, followed by a "/", followed
by the next level category, etc. The type should be defined
according to the guidelines elsewhere in this document.
(FIXME: write the guidelines, and give a better reference to them)
</para></listitem><listitem><para>
A brief description of the purpose of the element.
</para></listitem><listitem><para>
The version number of the element. For elements in the main
GStreamer source code, this will often simply be VERSION, which is
a macro defined to be the version number of the current GStreamer
version. The only requirement, however, is that the version
number should increase monotonically.
</para><para>
Version numbers should be stored in major.minor.patch form: ie, 3
(decimal) numbers, separated by ".".
</para></listitem><listitem><para>
The name of the author of the element, optionally followed by
a contact email address in angle brackets.
</para></listitem><listitem><para>
The copyright details for the element.
</para></listitem>
</itemizedlist>
<para>
For example:
</para>
<programlisting>
static GstElementDetails example_details = {
"An example plugin",
"Example/FirstExample",
"Shows the basic structure of a plugin",
VERSION,
"your name &lt;your.name@your.isp&gt;",
"(C) 2001",
};
</programlisting>
</sect1>
<sect1 id="sect-defineelt-constructors">
<title>Constructor functions</title>
<para>
Each element has two functions which are used for construction of
an element. These are the _class_init() function, which is used to
initialise the class (specifying what signals and arguments the class
has and setting up global state), and the _init() function, which
is used to initialise a specific instance of the class.
</para>
</sect1>
<sect1 id="sect-defineelt-pads">
<title>Specifying the pads</title>
<para>
</para>
</sect1>
<sect1 id="sect-defineelt-fns">
<title>Attaching functions</title>
<para>
</para>
</sect1>
<sect1 id="sect-defineelt-chainfn">
<title>The chain function</title>
<para>
</para>
</sect1>
<sect1 id="sect-defineelt-arguments">
<title>Adding arguments</title>
<para>
Define arguments in enum.
</para>
</sect1>
<sect1 id="sect-defineelt-signals">
<title>Signals</title>
<para>
Define signals in enum.
</para>
</sect1>
</chapter>
<chapter id="cha-definetype">
<title>Defining a type</title>
<para>
A new type is defined by creating an type factory. This is a
structure containing all the information needed to create an instance
of the type.
</para>
</chapter>
<chapter id="cha-plugininit">
<title>The plugin_init function</title>
<para>
Once we have written code defining all the parts of the plugin,
we need to write the plugin_init() function. This is a special
function, which is called as soon as the plugin is loaded, and
must return a pointer to a newly allocated GstPlugin structure.
This structure contains the details of all the facilities provided
by the plugin, and is the mechanism by which the definitions are
made available to the rest of the &GStreamer; system. Helper
functions are provided to help fill the
structure: for future compatability it is recommended that these
functions are used, as documented below, rather than attempting to
access the structure directly.
</para>
<para>
Note that the information returned by the plugin_init() function
will be cached in a central registry. For this reason, it is
important that the same information is always returned by
the function: for example, it must not make element factories
available based on runtime conditions. If an element can only
work in certain conditions (for example, if the soundcard is not
being used by some other process) this must be reflected by the
element being unable to enter the READY state if unavailable, rather
than the plugin attempting to deny existence of the plugin.
</para>
<sect1 id="sect-plugininit-types">
<title>Registering new types</title>
<para>
</para>
<programlisting>
void gst_plugin_add_type(GstPlugin *plugin,
GstTypeFactory *factory);
</programlisting>
<para>
</para>
</sect1>
<sect1 id="sect-plugininit-filter">
<title>Registering new element factories</title>
<para>
</para>
<programlisting>
void gst_plugin_add_factory(GstPlugin *plugin,
GstElementFactory *factory);
</programlisting>
<para>
Multiple element factories can be provided by a single plugin:
all it needs to do is call gst_plugin_add_factory() for each
element factory it wishes to provide.
</para>
</sect1>
<sect1 id="sect-plugininit-autopluggers">
<title>Registering new autopluggers</title>
<para>
</para>
<programlisting>
void gst_plugin_add_autoplugger(GstPlugin *plugin,
GstAutoplugFactory *factory);
</programlisting>
</sect1>
</chapter>
</part>
<!-- ############ part ############# -->
<part id="dparams"><title>Supporting Dynamic Parameters</title>
<partintro>
<para>
Sometimes object properties are not powerful enough to control the
parameters that affect the behaviour of your element. When this is
the case you can expose these parameters as Dynamic Parameters
which can be manipulated by any Dynamic Parameters aware application.
</para>
<para>
Throughout this section, the term dparams will be used as an abbreviation for Dynamic Parameters.
</para>
</partintro>
<sect2 id="sect-dparams-compare">
<title>Comparing Dynamic Parameters with GObject Properties</title>
<para>
Your first exposure to dparams may be to convert an existing element from
using object properties to using dparams. The following table gives an overview
of the difference between these approaches. The significance of these
differences should become apparent later on.
</para>
<informaltable frame="all">
<tgroup cols="3">
<thead>
<row>
<entry></entry>
<entry>Object Properties</entry>
<entry>Dynamic Parameters</entry>
</row>
</thead>
<tbody>
<row>
<entry><emphasis>Parameter definition</emphasis></entry>
<entry>Class level at compile time</entry>
<entry>Any level at run time</entry>
</row>
<row>
<entry><emphasis>Getting and setting</emphasis></entry>
<entry>Implemented by element subclass as functions</entry>
<entry>Handled entirely by dparams subsystem</entry>
</row>
<row>
<entry><emphasis>Extra objects required</emphasis></entry>
<entry>None - all functionality is derived from base GObject</entry>
<entry>Element needs to create and store a <filename>GstDParamManager</filename> at object creation</entry>
</row>
<row>
<entry><emphasis>Frequency and resolution of updates</emphasis></entry>
<entry>Object properties will only be updated between calls to _get, _chain or _loop</entry>
<entry>dparams can be updated at any rate independant of calls to _get, _chain or _loop
up to sample-level accuracy</entry>
</row>
</tbody>
</tgroup>
</informaltable>
</sect2>
&DPARAMS;
</part>
<!-- ############ part ############# -->
<part id="test-app"><title>Building a simple test application</title>
<partintro>
<para>
</para>
</partintro>
&TESTAPP;
</part>
<!-- ############ part ############# -->
<part id="loopbased"><title>Loop-based Elements</title>
<partintro>
<para>
</para>
</partintro>
&LOOPBASED;
</part>
<!-- ############ part ############# -->
<part id="buffersnmeta"><title>Buffers and Metadata</title>
<partintro>
<para>
</para>
</partintro>
&BUFFERS;
</part>
<!-- ############ part ############# -->
<part id="srcnsink"><title>Sources and Sinks</title>
<partintro>
<para>
</para>
</partintro>
&SRCNSINK;
</part>
<!-- ############ part ############# -->
<part id="statemanage"><title>State management</title>
<partintro>
<para>
</para>
</partintro>
&STATEMANAGE;
</part>
<!-- ############ part ############# -->
<part id="checklist"><title>Checklist</title>
<partintro>
<para>
</para>
</partintro>
&CHECKLIST;
</part>
</book>