gstreamer/tests/check/libs/basesrc.c
2012-11-03 20:44:48 +00:00

624 lines
19 KiB
C

/* GStreamer
*
* some unit tests for GstBaseSrc
*
* Copyright (C) 2006 Tim-Philipp Müller <tim centricular net>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <gst/gst.h>
#include <gst/check/gstcheck.h>
#include <gst/check/gstconsistencychecker.h>
#include <gst/base/gstbasesrc.h>
static GstPadProbeReturn
eos_event_counter (GstObject * pad, GstPadProbeInfo * info, guint * p_num_eos)
{
GstEvent *event = GST_PAD_PROBE_INFO_EVENT (info);
fail_unless (event != NULL);
fail_unless (GST_IS_EVENT (event));
if (GST_EVENT_TYPE (event) == GST_EVENT_EOS)
*p_num_eos += 1;
return GST_PAD_PROBE_OK;
}
/* basesrc_eos_events_push_live_op:
* - make sure source does send an EOS event when operating in push
* mode and being set to READY explicitly (like one might with
* live sources)
*/
GST_START_TEST (basesrc_eos_events_push_live_op)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
GstStreamConsistency *consistency;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", TRUE, NULL);
g_object_set (sink, "can-activate-pull", FALSE, NULL);
g_object_set (src, "can-activate-push", TRUE, NULL);
g_object_set (src, "can-activate-pull", FALSE, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
consistency = gst_consistency_checker_new (srcpad);
probe = gst_pad_add_probe (srcpad, GST_PAD_PROBE_TYPE_EVENT_BOTH,
(GstPadProbeCallback) eos_event_counter, &num_eos, NULL);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
/* wait a second, then do controlled shutdown */
g_usleep (GST_USECOND * 1);
/* shut down pipeline (should send EOS message) ... */
gst_element_send_event (pipe, gst_event_new_eos ());
/* ... and wait for the EOS message from the sink */
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* should be exactly one EOS event */
fail_unless (num_eos == 1);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent a second one when going PAUSED => READY */
fail_unless (num_eos == 1);
gst_consistency_checker_free (consistency);
gst_pad_remove_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_push:
* - make sure source only sends one EOS when operating in push-mode,
* reaching the max number of buffers, and is then shut down.
*/
GST_START_TEST (basesrc_eos_events_push)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
GstStreamConsistency *consistency;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", TRUE, NULL);
g_object_set (sink, "can-activate-pull", FALSE, NULL);
g_object_set (src, "can-activate-push", TRUE, NULL);
g_object_set (src, "can-activate-pull", FALSE, NULL);
g_object_set (src, "num-buffers", 8, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
consistency = gst_consistency_checker_new (srcpad);
probe = gst_pad_add_probe (srcpad, GST_PAD_PROBE_TYPE_EVENT_BOTH,
(GstPadProbeCallback) eos_event_counter, &num_eos, NULL);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* should be exactly one EOS event */
fail_unless (num_eos == 1);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent a second one when going PAUSED => READY */
fail_unless (num_eos == 1);
gst_consistency_checker_free (consistency);
gst_pad_remove_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_pull_live_op:
* - make sure source doesn't send an EOS event when operating in
* pull mode and being set to READY explicitly (like one might with
* live sources)
*/
GST_START_TEST (basesrc_eos_events_pull_live_op)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstPad *srcpad;
guint probe, num_eos = 0;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", FALSE, NULL);
g_object_set (sink, "can-activate-pull", TRUE, NULL);
g_object_set (src, "can-activate-push", FALSE, NULL);
g_object_set (src, "can-activate-pull", TRUE, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_probe (srcpad, GST_PAD_PROBE_TYPE_EVENT_BOTH,
(GstPadProbeCallback) eos_event_counter, &num_eos, NULL);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
/* wait a second, then do controlled shutdown */
g_usleep (GST_USECOND * 1);
/* shut down source only ... */
gst_element_set_state (src, GST_STATE_NULL);
state_ret = gst_element_get_state (src, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
fail_unless (gst_element_set_locked_state (src, TRUE) == TRUE);
/* source shouldn't have sent any EOS event in pull mode */
fail_unless (num_eos == 0);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent an EOS when going PAUSED => READY either */
fail_unless (num_eos == 0);
gst_pad_remove_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_pull:
* - makes sure source doesn't send EOS event when reaching the max.
* number of buffers configured in pull-mode
* - make sure source doesn't send EOS event either when being shut down
* (PAUSED => READY state change) after EOSing in pull mode
*/
GST_START_TEST (basesrc_eos_events_pull)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", FALSE, NULL);
g_object_set (sink, "can-activate-pull", TRUE, NULL);
g_object_set (src, "can-activate-push", FALSE, NULL);
g_object_set (src, "can-activate-pull", TRUE, NULL);
g_object_set (src, "num-buffers", 8, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_probe (srcpad, GST_PAD_PROBE_TYPE_EVENT_BOTH,
(GstPadProbeCallback) eos_event_counter, &num_eos, NULL);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* source shouldn't have sent any EOS event in pull mode */
fail_unless (num_eos == 0);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent an EOS when going PAUSED => READY either */
fail_unless (num_eos == 0);
gst_pad_remove_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_push_live_eos:
* - make sure the source stops and emits EOS when we send an EOS event to the
* pipeline.
*/
GST_START_TEST (basesrc_eos_events_push_live_eos)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
gboolean res;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", TRUE, NULL);
g_object_set (sink, "can-activate-pull", FALSE, NULL);
g_object_set (src, "can-activate-push", TRUE, NULL);
g_object_set (src, "can-activate-pull", FALSE, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_probe (srcpad, GST_PAD_PROBE_TYPE_EVENT_BOTH,
(GstPadProbeCallback) eos_event_counter, &num_eos, NULL);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
/* wait a second, then emit the EOS */
g_usleep (GST_USECOND * 1);
/* shut down source only (should send EOS event) ... */
res = gst_element_send_event (pipe, gst_event_new_eos ());
fail_unless (res == TRUE);
/* ... and wait for the EOS message from the sink */
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* should be exactly one EOS event */
fail_unless (num_eos == 1);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent a second one when going PAUSED => READY */
fail_unless (num_eos == 1);
gst_pad_remove_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_pull_live_eos:
* - make sure the source stops and emits EOS when we send an EOS event to the
* pipeline.
*/
GST_START_TEST (basesrc_eos_events_pull_live_eos)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
gboolean res;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", FALSE, NULL);
g_object_set (sink, "can-activate-pull", TRUE, NULL);
g_object_set (src, "can-activate-push", FALSE, NULL);
g_object_set (src, "can-activate-pull", TRUE, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_probe (srcpad, GST_PAD_PROBE_TYPE_EVENT_BOTH,
(GstPadProbeCallback) eos_event_counter, &num_eos, NULL);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
/* wait a second, then emit the EOS */
g_usleep (GST_USECOND * 1);
/* shut down source only (should send EOS event) ... */
res = gst_element_send_event (pipe, gst_event_new_eos ());
fail_unless (res == TRUE);
/* ... and wait for the EOS message from the sink */
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* no EOS in pull mode */
fail_unless (num_eos == 0);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent a second one when going PAUSED => READY */
fail_unless (num_eos == 0);
gst_pad_remove_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
static GstPadProbeReturn
segment_event_catcher (GstObject * pad, GstPadProbeInfo * info,
gpointer * user_data)
{
GstEvent *event = GST_PAD_PROBE_INFO_EVENT (info);
GstEvent **last_event = (GstEvent **) user_data;
fail_unless (event != NULL);
fail_unless (GST_IS_EVENT (event));
fail_unless (user_data != NULL);
if (GST_EVENT_TYPE (event) == GST_EVENT_SEGMENT) {
if (*last_event)
gst_event_unref (*last_event);
*last_event = gst_event_copy (event);
}
return GST_PAD_PROBE_OK;
}
/* basesrc_seek_events_rate_update:
* - make sure we get expected segment after sending a seek event
*/
GST_START_TEST (basesrc_seek_events_rate_update)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *probe_pad;
guint probe;
GstEvent *seg_event = NULL;
GstEvent *rate_seek;
gboolean event_ret;
const GstSegment *segment;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
bus = gst_element_get_bus (pipe);
/* set up event probe to catch new segment event */
probe_pad = gst_element_get_static_pad (sink, "sink");
fail_unless (probe_pad != NULL);
probe = gst_pad_add_probe (probe_pad, GST_PAD_PROBE_TYPE_EVENT_BOTH,
(GstPadProbeCallback) segment_event_catcher, &seg_event, NULL);
/* prepare the seek */
rate_seek = gst_event_new_seek (0.5, GST_FORMAT_TIME, GST_SEEK_FLAG_NONE,
GST_SEEK_TYPE_NONE, GST_CLOCK_TIME_NONE,
GST_SEEK_TYPE_NONE, GST_CLOCK_TIME_NONE);
GST_INFO ("going to playing");
/* play */
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
GST_INFO ("seeking");
/* seek */
event_ret = gst_element_send_event (pipe, rate_seek);
fail_unless (event_ret == TRUE);
/* wait a second, then do controlled shutdown */
g_usleep (GST_USECOND * 1);
/* shut down pipeline only (should send EOS message) ... */
gst_element_send_event (pipe, gst_event_new_eos ());
/* ... and wait for the EOS message from the sink */
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
GST_INFO ("stopped");
/* check that we have go the event */
fail_unless (seg_event != NULL);
gst_event_parse_segment (seg_event, &segment);
fail_unless (segment->rate == 0.5);
gst_pad_remove_probe (probe_pad, probe);
gst_object_unref (probe_pad);
gst_message_unref (msg);
gst_event_unref (seg_event);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
static Suite *
gst_basesrc_suite (void)
{
Suite *s = suite_create ("GstBaseSrc");
TCase *tc = tcase_create ("general");
suite_add_tcase (s, tc);
tcase_add_test (tc, basesrc_eos_events_pull);
tcase_add_test (tc, basesrc_eos_events_push);
tcase_add_test (tc, basesrc_eos_events_push_live_op);
tcase_add_test (tc, basesrc_eos_events_pull_live_op);
tcase_add_test (tc, basesrc_eos_events_push_live_eos);
tcase_add_test (tc, basesrc_eos_events_pull_live_eos);
tcase_add_test (tc, basesrc_seek_events_rate_update);
return s;
}
GST_CHECK_MAIN (gst_basesrc);