mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-11-26 11:41:09 +00:00
Code Issues 1 Projects Releases Wiki Activity
gstreamer/subprojects/gst-omx/ChangeLog

8029 lines
279 KiB
Text
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

=== release 1.19.2 ===
2021-09-23 01:36:02 +0100 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* gst-omx.doap:
* meson.build:
Release 1.19.2
2021-07-09 15:14:15 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: fix OMX flags on header buffer
The header (SPS/PPS) buffer should have the CODECONFIG flag
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/49>
2021-07-09 14:52:59 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: allow to start decoder on HEADER buffer
If the headers are sent in their own buffer
it won't have the SYNC_FRAME flag but we still
do want to start decoding rather than dropping it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/49>
2018-09-06 21:56:57 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomx.c:
* omx/gstomxh264dec.c:
* omx/gstomxh265dec.c:
* omx/gstomxvideodec.c:
omxh26xdec: videodecoder support subframe
Use of subframe API from videodecoder base class.
This subframe allows to decode subframe instead of
waiting for a whole frame.
The subframe uses the same frame over the whole
subframe passing process and will wait
for a signal to know the last subframe.
In this implementation it will use
GST_VIDEO_BUFFER_FLAG_MARKER as the
end of batch of subframes.
This implement subframe mode negotation for the Zynq based on caps
negotation. This mode can be combined with low-latency mode, in order to
reach the lowest possible latency (assuming the stream is within the
low-latency constraints for the HW).
... ! video/x-h264,alignment=nal ! omxh264dec ! ...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/49>
2021-06-01 15:29:18 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
Back to development
=== release 1.19.1 ===
2021-06-01 00:16:41 +0100 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* gst-omx.doap:
* meson.build:
Release 1.19.1
2020-11-04 18:48:13 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
* meson.build:
meson: Enable some MSVC warnings for parity with GCC/Clang
This makes it easier to do development with MSVC by making it warn
on common issues that GCC/Clang error out for in our CI configuration.
Continuation from https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/223
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/75>
2020-10-16 12:45:09 +0200 Stéphane Cerveau <scerveau@collabora.com>
* examples/egl/testegl.c:
* meson.build:
meson: update glib minimum version to 2.56
In order to support the symbol g_enum_to_string in various
project using GStreamer ( gst-validate etc.), the glib minimum
version should be 2.56.0.
Remove compat code as glib requirement
is now > 2.56
Version used by Ubuntu 18.04 LTS
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/74>
2020-10-05 12:32:10 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: support interlace-mode=interleaved input
interlace-mode=alternate is a special case of interlace-mode=interleaved
where the fields are split using two different buffers.
The Zynq decoder always produces alternate content and we
used to assume that upstream will set interlace-mode=alternate in its
caps as well.
This is no longer the case as h265parse is now setting
alternate-mode=interleaved on alternate content to not break compat with
elements not supporting alternate.
As a result the decoder now accept both 'interleaved' and 'alternate' on
its input and ensures that its ouput has interlace-mode=alternate.
Needed to fix https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/825
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/72>
2020-09-08 17:31:06 +0100 Tim-Philipp Müller <tim@centricular.com>
* .gitlab-ci.yml:
ci: include template from gst-ci master branch again
2020-09-08 16:59:09 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
Back to development
=== release 1.18.0 ===
2020-09-08 00:10:02 +0100 Tim-Philipp Müller <tim@centricular.com>
* .gitlab-ci.yml:
* ChangeLog:
* NEWS:
* RELEASE:
* gst-omx.doap:
* meson.build:
Release 1.18.0
2020-08-27 17:19:44 +0100 Tim-Philipp Müller <tim@centricular.com>
* config/tizonia/meson.build:
meson: fix Tizonia build
Was failing for release versions with
meson.build:414:10: ERROR: Can not set values on configuration object that has been used.
Caused by !69, but CI didn't notice at the time because it was set to a git version.
=== release 1.17.90 ===
2020-08-20 16:16:35 +0100 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* gst-omx.doap:
* meson.build:
Release 1.17.90
2020-07-08 17:39:20 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst-omx.doap:
* meson.build:
* scripts/extract-release-date-from-doap-file.py:
meson: set release date from .doap file for releases
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/69>
2020-07-03 02:04:16 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
Back to development
=== release 1.17.2 ===
2020-07-03 00:37:06 +0100 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* gst-omx.doap:
* meson.build:
Release 1.17.2
2020-06-20 00:28:37 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
Back to development
=== release 1.17.1 ===
2020-06-19 19:27:38 +0100 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* gst-omx.doap:
* meson.build:
Release 1.17.1
2020-06-16 01:20:27 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
* docs/gst_plugins_cache.json:
docs: Update plugin cache json
https://gitlab.freedesktop.org/alatiera/gst-ci/-/jobs/3109574
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/68>
2020-06-03 22:24:09 -0400 Thibault Saunier <tsaunier@igalia.com>
* docs/gst_plugins_cache.json:
docs: Update documentation cache
2019-12-23 18:23:55 -0800 Dylan Yip <dylan.yip@xilinx.com>
* omx/gstomx.c:
omx: Add latest OMX_ALG_Index's to omx_index_type_to_str
Add following indexes to omx_index_type_to_str:
OMX_ALG_IndexParamVideoAccessUnitDelimiter
OMX_ALG_IndexParamVideoBufferingPeriodSEI
OMX_ALG_IndexParamVideoPictureTimingSEI
OMX_ALG_IndexParamVideoRecoveryPointSEI
OMX_ALG_IndexParamVideoMasteringDisplayColourVolumeSEI
OMX_ALG_IndexParamVideoContentLightLevelSEI
OMX_ALG_IndexConfigVideoRegionOfInterestByValue
OMX_ALG_IndexConfigVideoColorPrimaries
2020-05-20 17:05:33 +0200 Stéphane Cerveau <scerveau@collabora.com>
* omx/gstomx.c:
zynq: change API to use public 2020.01 from vcu-omx-il
This new release 2020.01 fixes an API typo
Change to OMX_ALG_IndexConfigVideoHighDynamicRangeSEI
instead of OMX_ALG_IndexConfigVideoHighDynamicRangeSEIs
among others.
2017-12-27 17:18:54 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: factor out gst_omx_video_enc_allocate_out_buffers()
No semantic change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/66>
2020-04-10 11:47:03 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxh265enc.c:
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideoenc: remove unsupported formats from caps template
Our encoder implementation actually supports a small subset of the
formats supported by the decoder. Those are the formats for which we
have a copy path in gst_omx_video_enc_fill_buffer() and which are not
filtered out in filter_supported_formats().
2020-04-10 09:59:02 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideo.h:
video: remove BGR from supported format
It's not supported by either decoder or encoder and is even not listed in
gst_omx_video_get_format_from_omx() so it can't work.
2020-04-10 10:21:16 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: add GRAY8 support
It's supported by Zynq encoder and was already in the sink caps
template.
2020-04-10 11:18:49 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: factor out gst_omx_video_enc_copy_plane()
No semantic change, I'm going to use it to copy GRAY8 buffers which is
actually a single plane 8-bits format.
2020-04-10 10:58:34 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: use gst_video_meta_get_plane_height() to compute slice height
This new API saves us from doing manual computation and actually work
with single planar formats, such as GRAY8.
2020-04-07 19:59:12 +0200 Stéphane Cerveau <scerveau@collabora.com>
* omx/gstomxh264enc.c:
* omx/gstomxh265enc.c:
* omx/gstomxvideo.c:
* omx/gstomxvideoenc.c:
omxh26xenc: fix coverity with frame test
Coverity was complaining with:
Null pointer dereferences (REVERSE_INULL) Null-checking "frame"
suggests that it may be null, but it has already been
dereferenced on all paths leading to the check.
The frame == NULL has been removed as 'frame' is actively used
in the code above without any change of dereferencing and setting
its value to NULL before the test.
CID: 1461287
2020-03-19 16:23:41 +0100 Stéphane Cerveau <scerveau@collabora.com>
* omx/gstomxvideoenc.c:
gstomxvideoenc: fix subframe output_buffer
Using more than 1 subframes was failing with
frame->output_buffer = NULL
2020-02-06 10:21:49 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: add support of alternate interlace mode on zynq
2020-02-06 10:11:13 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxh265enc.c:
* omx/gstomxvideoenc.c:
omxvideoenc: add support of alternate interlace mode on zynq
It's only supported by the Zynq HEVC encoder for now.
2020-02-06 10:12:50 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
omx: add alternate flags to buffer_flags_map
Zynq specific flags used to tag top/bottom fields in alternate mode.
2020-02-06 09:57:48 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideo.c:
* omx/gstomxvideoenc.c:
omxvideo(enc): use GST_VIDEO_INFO_FIELD_RATE_N()
Does not change anything for now but will be needed when we'll support
interlace-mode=alternate as the field rate will be twice the frame rate.
Made the code safe from division by 0 while I was on it.
2020-02-06 09:36:20 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo{enc,dec}: use GST_VIDEO_INFO_FIELD_HEIGHT()
Does not change anything for now but will be needed when we'll support
interlace-mode=alternate as the fields will have half the frame height.
2020-02-25 10:45:47 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
omx: don't log error when failing to load conf file with generic target
The generic target is meant to only test building gst-omx. It doesn't
provide any configuration file and so is not supposed to register any
element.
I'm not aware of any user building gst-omx with this target and
providing their own conf file to actually register elements. But best to
not break this use case anyway so let's just downgrade the log message.
Fix GST_ERROR in the 'check fedora' CI job.
2020-01-27 11:56:53 +0100 Stéphane Cerveau <scerveau@collabora.com>
* meson.build:
meson: add glib project fallback
Add a fallback from glib project to provide glib, gio and
gmodule dependencies.
2020-01-15 11:06:12 +0000 Stéphane Cerveau <scerveau@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: fix warning
Fix warning test when OMX_BUFFERFLAG_ENDOFFRAME
is not set.
2018-08-28 13:03:14 -0700 Varunkumar Allagadapa <varunkum@xilinx.com>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Add look-ahead property to ZYNQ_USCALE_PLUS encoder
This patch adds look-ahead property to encoder
The value indicates look ahead size in frames,
the number of frames processed ahead of second pass encoding.
Dual pass encoding is disabled if look-ahead
value is less than 2.
2018-08-06 13:02:41 -0700 Varunkumar Allagadapa <varunkum@xilinx.com>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Add long-term-ref support to ZYNQ_USCALE_PLUS encoder
Custom API that upstream elements can use to notify encoders about
marking longterm ref. pictures or using longterm ref. pictures in
encoding process.
This patch adds below properties:
long-term-ref: Enable/Disable dynamically marking long-term
reference pictures in encoding process
long-term-freq: Periodicity of long-term reference picture
marking in encoding process.
If a picture is marked as long-term reference picture then it remains
in the DPB list for ever unless it overrides with new long-term pitcure with
same index. Encoder can use this long-term picture as refence for
encoding.
This feature is mostly useful to avoid visual artifacts propagation in streaming use cases
when packet loss happens. Instead of requesting for IDR, client can request for use long-term
reference picture for encoding.
2020-01-07 10:24:19 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* meson.build:
meson: display OMX target when configuring
I'm adding more gst-omx CI (
https://gitlab.freedesktop.org/gstreamer/gst-ci/issues/20 ) having the
OMX targets displayed in the logs makes things clearer.
2019-08-30 10:27:32 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
omx: remove useless double negations
flush and port->flushing are both gboolean.
2019-12-20 22:19:06 -0800 Julien Isorce <jisorce@oblong.com>
* meson.build:
meson: fix tizonia build
meson.build was both using path to gst-omx/openmax/OMX*
headers and path to OMX headers provided by tizilheaders.pc
so this patch makes sure we only use the later.
Also bump tizonia minimum version to 0.19.0 which
is the latest release.
2019-05-16 10:50:18 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxh265enc.c:
* omx/gstomxh265enc.h:
omxh265enc: handle CODECCONFIG buffers
Exact same code as omxh264enc.
2019-05-16 10:38:49 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxh264enc.c:
omxh264enc: send codec data downstream
We are operating in stream-format=byte-stream so the codec data buffer
is meant to be part of the buffer flow.
The base class will push it when a key frame is requested (as we stored
it with gst_video_encoder_set_headers()) but we still have to push it
right away as part of the normal buffer flow.
Also set the HEADER flag on this buffer.
2019-05-16 10:38:49 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxh264enc.c:
omxh264enc: no need to check if codeconfig has startcode
We currently only support stream-format=byte-stream so there is no point
re-checking for it when handling CODECCONFIG buffer.
2018-09-04 20:12:17 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxh264enc.c:
* omx/gstomxh265enc.c:
omxh26xenc: Negotiate subframe mode
We now negotiate subframe mode through the caps. To enabled subframe
mode, the caps need to specify alignment=nal:
... ! omxh264enc ! video/x-h264,alignment=nal ! ...
... ! omxh265enc ! video/x-h265,alignment=nal ! ...
2018-08-31 12:24:34 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: use subframe base class API
Use subframe base class support.
2018-09-04 19:34:59 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add helper to enable/disable/read subframe mode
2019-12-19 13:51:17 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
zynq: add mapping for latest custom indexes
Fix warning when building using version 2019.2 of OMX headers.
2019-09-12 16:29:59 -0700 Varunkumar Allagadapa <varunkumar.allagadapa@xilinx.com>
* omx/gstomxvideoenc.c:
omxvideoenc: update qp-mode settings
Adds load-qp-absolute and load-qp-relative qp-modes
2019-12-10 18:34:25 +0900 Shinya Saito <ssaito@igel.co.jp>
* omx/gstomxvideoenc.c:
omxvideoenc: Add stride check for input buffer extraction
Stride of input buffer may be different from
that of omx input port even if both sizes are the same.
2019-05-15 14:04:47 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: pass padding requirements to ALLOCATION query
By passing the expected video buffer layout, the upstream producer
may be able to produce buffers fitting those requierements allowing
gst-omx to use dynamic buffer mode rather than having to copy each input
buffer.
This is particularly useful with v4l2src as it can request the capture
driver to produce buffers with the required paddings.
2019-07-09 13:07:32 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxbufferpool.c:
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
omxbufferpool: use gst_video_meta_set_alignment()
Tell buffer consumer about our paddings.
v4l2src can now uses these paddings information when trying to import
buffers to configure the v4l2 driver accordingly.
2019-05-30 11:11:34 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: fix buffer size in debug log
Use the actual OMX buffer size rather than the info.size as OMX
may require larger buffer if the port requires some padding.
2019-10-14 00:48:32 +0100 Tim-Philipp Müller <tim@centricular.com>
* .gitignore:
* .gitmodules:
* Makefile.am:
* autogen.sh:
* common:
* config/Makefile.am:
* config/bellagio/Makefile.am:
* config/rpi/Makefile.am:
* config/tizonia/Makefile.am:
* config/zynqultrascaleplus/Makefile.am:
* configure.ac:
* examples/Makefile.am:
* examples/egl/Makefile.am:
* m4/Makefile.am:
* omx/Makefile.am:
* tests/Makefile.am:
* tests/check/.gitignore:
* tests/check/Makefile.am:
* tests/check/generic/.gitignore:
* tools/Makefile.am:
Remove autotools build
2019-10-07 16:59:10 +0000 Stéphane Cerveau <scerveau@collabora.com>
* omx/gstomxallocator.c:
omxallocator: fix leak with a proper chaining finalize
2019-09-20 15:02:24 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: revert draining on ALLOCATION and DRAIN query
My latest patch introduces some regressions which I have no time to
debug properly at the moment so just revert it for now.
2019-09-17 13:02:54 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: let encoder base class handle ALLOCATION query
Fixing a regression introduced in my previous patch
(7c40a91c31aa4bcbb191f7c6a5d222edf9dfd9d1).
The ALLOCATION query needs to be handled by GstVideoEncoder (to call
propose_allocation()) so chain up the query handling rather than early
returning.
2019-08-29 12:20:56 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: drain encoder on ALLOCATION and DRAIN queries
Ensure that the encoder releases all its input buffers when requested by
upstream. Encoder input buffers may be shared with downstreaming (when
using dmabuf), upstream may then request the encoder to
drain when reconfiguring before destroying its buffers.
Also drain on ALLOCATION query as we already do in kmssink as that
notify of a format change.
Fix "decoder ! encoder" pipeline when decoding a file with different
resolutions on Zynq.
2019-08-28 15:52:41 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
omx: log the number of pending buffers when port is EOS
2019-08-28 15:49:00 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
omx: log when an output port is eos
2019-08-27 15:47:28 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: log the full input format
Make it easier to debug dynamic format changes.
2019-08-21 12:25:40 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: fix dmabuf import
When importing dmabuf, UseBuffer() has to be called with the fd as
pBuffer rather than the mapped address of the buffer.
2019-08-21 12:48:25 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxbufferpool.c:
omxbufferpool: fix dmabuf import
When importing dmabuf from downstream, we want the allocator to be in
OTHER_POOL mode despite output_mode being DMABUF.
So check first if other_pool is set before checking for pool's
output_mode.
2019-08-22 17:55:54 +0900 Shinya Saito <ssaito@igel.co.jp>
* omx/gstomxvideoenc.c:
omxvideoenc: Remove unnecessary gst_video_frame_unmap()
2019-07-25 16:30:13 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: log supported caps by the decoder
Can be useful when debugging to check the caps supported by the decoder
before filtering.
2019-07-11 12:03:46 +0900 Shinya Saito <ssaito@igel.co.jp>
* omx/gstomxvideoenc.c:
omxvideoenc: Unref frame of codec config buffer
After handling codec config, codec frame should be unreffed.
2019-06-14 16:27:37 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideo.c:
omxvideo: check difference between frame and requested ts
This has proven to be very useful when debugging to detect bugs where we
match the wrong gst frame with an output OMX buffer.
2019-06-14 10:57:29 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo: add debug infos to find_nearest_frame()
Those debug infos have proved to be very helpful when debugging
timestamp issues. They are often linked to gst-omx picking the wrong
frame when trying to map from OMX.
2019-03-05 16:57:40 +0900 Shinya Saito <ssaito@igel.co.jp>
* omx/gstomxvideodec.c:
omxvideodec: Deactivate negotiated pool when output own buffer
If decoder outputs internal buffer and not use OMX_UseBuffer,
downstream bufferpool should be stopped.
2019-06-03 12:21:05 +0900 Shinya Saito <ssaito@igel.co.jp>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: Add 'ref-frames' property
Add a property to control the number of frames for reference.
Min and max value is based on OpenMAX IL 1.2.0 Specification.
2019-06-03 07:57:02 +0200 Niels De Graef <niels.degraef@barco.com>
* configure.ac:
* meson.build:
meson: Bump minimal GLib version to 2.44
This means we can use some newer features and get rid of some
boilerplate code using the G_DECLARE_* macros.
As discussed on IRC, 2.44 is old enough by now to start depending on it.
2019-04-19 12:38:54 -0400 Thibault Saunier <tsaunier@igalia.com>
* docs/gst_plugins_cache.json:
* docs/index.md:
* docs/meson.build:
* docs/sitemap.txt:
* meson.build:
* meson_options.txt:
* omx/meson.build:
doc: Build documentation of hotdoc
2019-03-26 12:26:03 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
* omx/gstomx.h:
gstomx: remove gst_omx_buffer_set_omx_buf/get_omx_buf
They are no longer used anywhere
2019-03-22 12:11:13 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/Makefile.am:
* omx/gstomxallocator.c:
* omx/gstomxallocator.h:
* omx/gstomxbufferpool.c:
* omx/gstomxbufferpool.h:
* omx/gstomxvideoenc.c:
* omx/meson.build:
omxbufferpool: refactor to allow memory sharing
One big restriction of the OMX buffer pool has always been
that the GstMemory objects were flagged with NO_SHARE.
This was because the buffer pool needed to be sure that when
a buffer returned to the pool, it would be safe to release the
OMX buffer back to OpenMAX.
With this change, this is no longer a restriction. What this
commit introduces is a new allocator that allows us to track
the GstMemory objects independently. Now, when a buffer returns
to the pool, it is not necessary for the memory to be released
as well. We simply track the memory's ref count in the allocator
and we return the OMX buffer back when the memory's ref count
drops to 0.
The reason for doing this is to allow implementing zero-copy
transfers in situations where we may need to copy or map a
certain region of the buffer. For instance, omxh264enc ! h264parse
should be possible to be zero-copy by using an OMX buffer pool
between them.
2019-04-23 15:13:23 +0530 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxbufferpool.c:
omxbufferpool: fix memory mapping with offset
gst_memory_map() is already adding the offset to the mapped pointer.
Doing it in the memory implementation was resulting in the offset being
accounted twice.
It doesn't matter yet as we are only creating memory without offset for
now but it will once we'll start sharing OMX memories.
2019-04-19 10:43:58 +0100 Tim-Philipp Müller <tim@centricular.com>
* RELEASE:
* configure.ac:
* meson.build:
Back to development
=== release 1.16.0 ===
2019-04-19 00:38:44 +0100 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.16.0
2019-04-16 12:23:10 -0700 Julien Isorce <jisorce@oblong.com>
* omx/gstomx.c:
Fixes build with omx >= 1.2.0
gstomx.c:1405:10: error: ‘OMX_IndexParamCustomContentPipe’ undeclared (first use in this function)
case OMX_IndexParamCustomContentPipe
Some enums have been deprecated in 1.2.0
https://gitlab.freedesktop.org/gstreamer/gst-omx/issues/27
2018-05-18 10:55:21 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* configure.ac:
* examples/egl/Makefile.am:
* examples/egl/meson.build:
testegl: properly detect and use rpi specific libs
Use pkg-config to detect and configure rpi specific libs used in testegl
rather than hardcoding their flags.
2018-05-18 10:53:34 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* examples/egl/testegl.c:
testelg: include eglext.h
Neded for the declaration of eglSaneChooseConfigBRCM().
2018-05-18 10:38:33 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* examples/egl/testegl.c:
testegl: move up pi specific macros
We need to define __VCCOREVER__ and disable redundant-decls before
including the egl.h from the pi.
=== release 1.15.90 ===
2019-04-11 00:40:52 +0100 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.15.90
2019-04-10 00:19:55 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: add -Wundef as additional warning flag
2019-04-10 00:16:27 +0100 Tim-Philipp Müller <tim@centricular.com>
* omx/gstomxvideoenc.c:
omx: fix autotools build for generic target
gstomxvideoenc.c:2874:7: error: "USE_OMX_TARGET_ZYNQ_USCALE_PLUS" is not defined, evaluates to 0 [-Werror=undef]
#elif USE_OMX_TARGET_ZYNQ_USCALE_PLUS
Works on meson because it doesn't use -Wundef
2018-11-12 12:51:28 +0200 Jordan Petridis <jordan@centricular.com>
* .gitlab-ci.yml:
Add Gitlab CI configuration
This commit adds a .gitlab-ci.yml file, which uses a feature
to fetch the config from a centralized repository. The intent is
to have all the gstreamer modules use the same configuration.
The configuration is currently hosted at the gst-ci repository
under the gitlab/ci_template.yml path.
Part of https://gitlab.freedesktop.org/gstreamer/gstreamer-project/issues/29
2019-03-25 16:30:11 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
omx: disable OMX_API_TRACE code if gst debug is disabled
No need to create debug structs which won't be used as DEBUG macros are
no-op.
2018-10-11 10:55:04 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: log Get/SetParameter/Config calls
Extend OMX_API_TRACE by logging component configuration calls.
2019-02-06 14:57:05 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxbufferpool.c:
omxbufferpool: don't use CAT_PERFORMANCE if pool will copy
This was the single place where this category was used in gst-omx so
most users, including me, are generally not turning it and were missing this
important information from logs.
The copying code uses gst_video_frame_copy() which is already logging
with CAT_PERFORMANCE so we can still have this information when using
only this debug category.
2019-02-06 14:50:44 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: add debug if proposed pool can't provide enough buffers
We were silently ignoring the pool which was pretty confusing when
debugging.
2019-03-26 12:17:26 +0000 Charlie Turner <cturner@igalia.com>
* omx/gstomxaacdec.c:
* omx/gstomxaacenc.c:
* omx/gstomxamrdec.c:
* omx/gstomxh263dec.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264enc.c:
* omx/gstomxh265dec.c:
* omx/gstomxh265enc.c:
* omx/gstomxmjpegdec.c:
* omx/gstomxmp3dec.c:
* omx/gstomxmp3enc.c:
* omx/gstomxmpeg2videodec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxtheoradec.c:
* omx/gstomxvp8dec.c:
* omx/gstomxwmvdec.c:
omx: Add hardware classifiers to encoders/decoders
2019-03-25 16:01:48 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* meson.build:
meson: sync warnings flags with -good
Add more warnings flags and disabled unused variable warnings if gst
debug system is disabled.
Copied from gst-plugins-good/meson.build
2019-03-04 09:16:40 +0000 Tim-Philipp Müller <tim@centricular.com>
* NEWS:
* RELEASE:
* configure.ac:
* meson.build:
Back to development
=== release 1.15.2 ===
2019-02-26 12:02:23 +0000 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.15.2
2019-02-14 23:57:09 +0000 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
* meson_options.txt:
meson: add options to disable examples, tests and tools and bump meson requirement
2019-01-04 10:11:38 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo: use GST_VIDEO_CAPS_MAKE() for template caps
Simplify the code and so we advertise the formats actually supported by
gst-omx.
2018-06-04 12:20:03 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: validate cpb-size and initial-delay
cpb-size cannot be smaller than initial-delay.
2018-10-02 10:47:06 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: Remove duplicated QoS code
The 'finish' function do the exact same check / drop, there is no
need to duplicate this here.
2018-09-20 14:44:09 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Remove dead code
The omxvideodec base class have a totally unused prepare_frame() vritual
function, remove it.
2018-07-11 17:38:22 -0700 Varunkumar Allagadapa <varunkum@xilinx.com>
* omx/gstomxvideoenc.c:
omxvideoenc: add adaptive gop-mode option
Added adaptive gop-mode option to ZYNQ_USCALE_PLUS encoder properties
2018-02-13 18:25:51 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Add dynamic framerate support
Instead of going through a full reset, try and change the framerate
config on the encoder when only the framerate have change.
=== release 1.15.1 ===
2019-01-17 02:38:28 +0000 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.15.1
2018-02-20 10:57:42 -0800 Varunkumar Allagadapa <varunkum@xilinx.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Add dynamic IDR insertion support on zynq
As the pi, the zynq has its own API to request keyframe.
2019-01-07 13:29:37 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxbufferpool.c:
omxbufferpool: fix race when releasing input buffers
If buffers were released from the pool while
gst_omx_video_enc_handle_frame() was waiting for new buffers,
gst_omx_port_acquire_buffer() was never awaken as the buffers weren't
released through OMX's messaging system.
GQueue isn't thread safe so also protect it with the lock mutex.
2018-11-15 11:17:59 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxbufferpool.c:
* omx/gstomxbufferpool.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxbufferpool: fix early input buffer release
We used to track the 'allocating' status on the pool. It is used while
allocating so output buffers aren't passed right away to OMX and input
ones are not re-added to the pending queue.
This was causing a bug when exporting buffers to v4l2src. On start
v4l2src acquires a buffer, read its stride and release it right away.
As no buffer was received by the encoder element at this point, 'allocating'
was still on TRUE and so the the buffer wasn't put back to the pending
queue and, as result, no longer available to the pool.
Fix this by checking the active status of the pool instead of manually
tracking it down. The pool is considered as active at the very end of
the activation process so we're good when buffers are released during
the activation.
2018-12-05 17:24:48 -0300 Thibault Saunier <tsaunier@igalia.com>
* common:
Automatic update of common submodule
From ed78bee to 59cb678
2018-11-23 12:57:15 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.com>
* omx/gstomx.c:
omx: fix OMX_EventBufferFlag OMX_API_TRACE struct
The GType was missing from the second field of the struct.
2018-11-05 05:43:43 +0000 Matthew Waters <matthew@centricular.com>
* .gitmodules:
* gst-omx.doap:
Update git locations to gitlab
2018-09-18 16:50:11 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: rename OMX_PERFORMANCE debug cat to OMX_API_TRACE
This debug category can now be used to track more OMX calls and events
so best to rename it to something more generic.
https://bugzilla.gnome.org/show_bug.cgi?id=797171
2018-08-21 17:35:04 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: log OMX commands with OMX_PERFORMANCE debug category
It has been useful to have a clear raw and structured view of the gst
<-> OMX exchanges when debugging.
https://bugzilla.gnome.org/show_bug.cgi?id=797171
2018-08-21 16:50:38 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: factor out gst_omx_component_send_command()
No semantic change. I'm going to add extra debug in this function.
https://bugzilla.gnome.org/show_bug.cgi?id=797171
2018-08-21 15:14:09 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: log OMX events with OMX_PERFORMANCE debug category
It has been useful to have a clear raw and structured view of the gst
<-> OMX exchanges when debugging.
https://bugzilla.gnome.org/show_bug.cgi?id=797171
2018-08-22 12:51:30 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: rename log_omx_performance() to log_omx_performance_buffer()
I'm about to log more things under this category
https://bugzilla.gnome.org/show_bug.cgi?id=797171
2018-09-07 22:57:30 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Remove spurious locking
The method we call in the context of pushing a buffer are all thread
safe. Holding a lock would prevent input buffers from being queued while
pushing.
https://bugzilla.gnome.org/show_bug.cgi?id=715192
2018-09-07 23:09:29 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Remove unneeded size check
We only enter this branch if nFilledLen > 0, there is not need
to check again.
https://bugzilla.gnome.org/show_bug.cgi?id=715192
2018-09-07 22:55:41 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: Remove spurious unlock in error case
This was forgotton in previous patch. We no long hold the lock when goto
invalid_buffer is called.
https://bugzilla.gnome.org/show_bug.cgi?id=715192
2018-08-31 17:28:03 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: don't hold the stream lock when trying to push a frame
The base class methods will lock this properly when needed, there seems
to be no need to lock it explicitly.
This allows the patch in gstvideodec for unlocking the stream lock
when pushing buffers out to work.
https://bugzilla.gnome.org/show_bug.cgi?id=715192
2018-07-31 13:22:31 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: don't import OMX buffers from downstream
We already have code configuring the encoder stride and slice height
when receiving the first buffer from upstream.
We don't have an equivalent when the encoder is exporting its buffers to the
decoder.
There is no point adding it and making the code even more
complex as we wouldn't gain anything by exporting from the encoder to
the decoder. The dynamic buffer mode already ensures 0-copy between OMX
components.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-05-15 11:59:26 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxbufferpool.c:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: implement dmabuf export on input buffers
Propose pool upstream so input buffers can be allocated by the port and
exported as dmabuf.
The actual OMX buffers are allocated when the pool is activated, so we
don't end up doing useless allocations if the pool isn't used.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-08-13 15:10:37 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudiodec.c:
* omx/gstomxaudioenc.c:
* omx/gstomxaudiosink.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: allow gst_omx_port_acquire_buffer() to not wait for buffers
Will be needed to implement GST_BUFFER_POOL_ACQUIRE_FLAG_DONTWAIT.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-07-31 15:04:33 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: don't import non-dmabuf when dec is in dmabuf mode
Fix 'omxh264dec ! videocrop' pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-08-02 11:29:12 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: factor out gst_omx_try_importing_buffer()
No semantic change, just make the code clearer and improve debug output.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-07-26 16:30:08 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: fix gst_video_info_from_caps() caps assertion
The "use buffers" code path uses gst_video_info_from_caps() which is
asserting if caps is NULL (because pool was rejected).
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-07-26 16:22:50 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: fix pool caps reference stealing
gst_buffer_pool_config_get_params() doesn't ref the returning caps;
so gst_caps_replace() was unreffing the reference owned by the pool.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-07-25 09:57:20 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: prevent timeout when shutting down because of pending out buffers
The OMX transition state to Loaded won't be complete until all buffers
have been freed. There is no point waiting, and timeout, if we know that
output buffers haven't been freed yet.
The typical scenario is output buffers being still used downstream
and being freed later when released back to the pool.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-07-24 15:14:31 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxbufferpool.c:
omxbufferpool: reference the OMX component
Now that the pool is responsible of freeing the OMX buffers, we need to
ensure that the OMX component stay alive while the pool is as we rely on
the component to free the buffers.
The GstOMXPort is owned by the component so no need to ref this one.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-07-24 15:06:01 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudiodec.c:
* omx/gstomxaudioenc.c:
* omx/gstomxaudiosink.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
turn GstOMXComponent to a GstMiniObject
Will use it for refcounting.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-05-28 12:20:45 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxbufferpool.c:
* omx/gstomxvideodec.c:
omxbufferpool: deallocate OMX buffers when stopping
The pool is stopped when all the buffers have been released. Deallocate
when stopping so we are sure that the buffers aren't still used by
another element.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-05-24 16:28:21 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: call gst_omx_buffer_unmap() when handling BUFFER_DONE
When using a input buffer pool, the buffer may be released to the pool when
gst_omx_buffer_unmap() is called. We need to have buf->used unset at
this point as the pool may use it to check the status of the pool.
{Empty,Fill}BufferDone is called from OMX internal threads while
messages are handled from gst elements' thread. Best to do all this
when handling the message so we don't mess with OMX threads and keep
the original thread/logic split.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-05-25 14:44:16 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo{enc,dec}: stop calling shutdown() in change_state
This is no longer needed since we implemented close() vfuncs as the
encoder/decoder base class already take care of calling close() (which
is calling shutdown()) in its own change_state implementation.
We also move the shut down of the component from PAUSED_TO_READY to READY_TO_NULL.
By doing so upstream will have already deactivated the pool from the
encoder and so won't be preventing the OMX state change as the buffers
will all be released.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-05-15 16:21:26 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxbufferpool.c:
omx: factor out gst_omx_buffer_get/set_omx_buf()
Move the qdata code to helper functions as I'm going to need them in
omxvideoenc to implement dmabuf export.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-05-15 11:01:13 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: factor out gst_omx_video_enc_set_to_idle()
No semantic change. We'll have to use this when the input pool is
activated so we can allocate buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-05-15 09:56:10 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: factor out gst_omx_video_enc_deallocate_in_buffers()
Will add extra code when adding input buffer pool.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-05-14 15:16:38 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: add pBuffer to OMX_PERFORMANCE logs
Can be useful to check the fd being passed when using dmabuf.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-03-21 12:43:33 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: factor out gst_omx_port_set_dmabuf()
No semantic change. I also made the debug message a bit clearer.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
2018-08-22 15:56:18 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: wait for flush complete and buffers being released when flushing
When flusing we should wait for OMX to send the flush command complete event
AND all ports being released.
We were stopping as soon as one of those condition was met.
Fix a race between FillThisBufferDone/EmptyBufferDone and the flush
EventCmdComplete messages. The OMX implementation is supposed to release
its buffers before posting the EventCmdComplete event but the ordering
isn't guaranteed as the FillThisBufferDone/EmptyBufferDone and
EventHandler callbacks can be called from different threads (cf 2.7
'Thread Safety' in the spec).
Only wait for buffers currently used by OMX as some buffers may not be
in the pending queue because they are held downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=789475
2018-08-22 15:52:23 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: factor out should_wait_until_flushed()
No semantic change. Makes the code easier to understand and I'm about to
change the waiting condition.
https://bugzilla.gnome.org/show_bug.cgi?id=789475
2018-08-28 13:10:35 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: pause component when flushing
As stated in the spec ("6.1.3 Seek Event Sequence") we should pause
before flushing.
We were pausing the decoder but not the encoder so I just aligned the
two code paths.
https://bugzilla.gnome.org/show_bug.cgi?id=797038
2018-07-12 12:41:18 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: fix vertical padding in NV16 formats
My previous patch to calculate the vertical padding was always halfing
the height of the chroma plane which is incorrect for NV16 formats.
https://bugzilla.gnome.org/show_bug.cgi?id=796749
2018-07-05 15:13:47 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: include vertical padding in nFilledLen when copying
According to the OMX spec (3.1.3.7.1) nFilledLen is meant to include any
padding. We use to include the horizontal one (stride) but not the
vertical one if nSliceHeight is bigger than the actual height.
The calculated nFilledLen was wrong as it didn't include the padding
between planes.
https://bugzilla.gnome.org/show_bug.cgi?id=796749
2018-04-26 12:30:47 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: implement decide_allocation
Increase the number of output buffers by the number of buffers requested
downstream.
Prevent buffers starvation if downstream is going to use dynamic buffer
mode on its input.
https://bugzilla.gnome.org/show_bug.cgi?id=795746
2018-04-26 12:29:16 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: implement propose_allocation
Tell upstream about how many buffer we plan to use so they can adjust
their own number of buffers accordingly if needed.
Same logic as the existing gst_omx_video_enc_propose_allocation().
https://bugzilla.gnome.org/show_bug.cgi?id=795746
2018-05-17 09:54:11 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: always signal drain cond when stopping streaming loop
Similar change as the one I just did in omxvideodec.
https://bugzilla.gnome.org/show_bug.cgi?id=796207
2018-05-16 17:06:29 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: always signal drain cond when stopping streaming loop
If for some reason something goes wrong and we stop the streaming loop
we may end up with other threads still waiting on the drain cond.
No more buffers will be produced by the component so they were waiting
forever.
Fix this by always signalling this cond when stopping the streaming
loop.
https://bugzilla.gnome.org/show_bug.cgi?id=796207
2018-05-16 17:02:01 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideoenc: factor out gst_omx_video_enc_pause_loop()
No semantic change. I'm going to use it in more failure cases.
https://bugzilla.gnome.org/show_bug.cgi?id=796207
2018-05-17 14:24:52 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* config/zynqultrascaleplus/gstomx.conf:
zynqultrascaleplus: enable 'ensure-buffer-count-actual' hack
https://bugzilla.gnome.org/show_bug.cgi?id=791211
2018-04-27 16:26:36 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideodec/enc: add hack updating nBufferCountActual before allocating
The OMX specs states that the nBufferCountActual of a port has to default
to its nBufferCountMin. If we don't change nBufferCountActual we purely rely
on this default. But in some cases, OMX may change nBufferCountMin before we
allocate buffers. Like for example when configuring the input ports with the
actual format, it may decrease the number of minimal buffers required.
This method checks this and update nBufferCountActual if needed so we'll use
less buffers than the worst case in such scenarios.
SetParameter() needs to be called when the port is either disabled or
the component in the Loaded state.
Don't do this for the decoder output as
gst_omx_video_dec_allocate_output_buffers() already check
nBufferCountMin when computing the number of output buffers.
On some platform, like rpi, the default nBufferCountActual is much
higher than nBufferCountMin so only enable this using a specific gst-omx
hack.
https://bugzilla.gnome.org/show_bug.cgi?id=791211
2018-05-28 15:02:13 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvidee{enc,dec}: refresh input port definition after setting format
Setting the input format and the associated encoder/decoder settings
may also affect the nBufferCountMin of the input port.
Refresh the input port so we'll use up to date values in propose/decide
allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=796445
2018-05-07 11:59:08 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: always consider component in 'invalid' state when an error occured
gst_omx_component_get_state() used to early return if there was no
pending state change. So if the component raised an error it wasn't
considered in the invalid state until the next requested state change.
Fix this by checking first if we received an error.
https://bugzilla.gnome.org/show_bug.cgi?id=795874
2018-05-25 01:35:58 +1000 Matthew Waters <matthew@centricular.com>
* meson.build:
* meson_options.txt:
meson: Update option names to omit 'with_omx' prefixes
Companion commit to:
https://cgit.freedesktop.org/gstreamer/gstreamer/commit/?id=4fb02fc85b70be631f5331b2547e5dc61ef7a43a
https://cgit.freedesktop.org/gstreamer/gst-plugins-base/commit/?id=1e1a5d658e4a031535c44823fd398d3052ca2000
etc...
2018-03-21 13:52:23 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: pass a GstOMXBufferMode to gst_omx_buffer_pool_new()
The output_mode is supposed to be a GstOMXBufferMode, not a boolean.
2018-05-03 09:27:15 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* config/zynqultrascaleplus/gstomx.conf:
zynq: remove 'no-disable-outport' hack
No longer needed with newer version of the OMX stack.
2018-03-13 16:15:30 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
* omx/gstomxh265enc.c:
omxh26{4,5}enc: don't pick default 10-bit profile
The OMX stack of the zynqultrascaleplus (the only one supporting
NV12_10LE32 and NV16_10LE32) will now pick the proper profile if none
has been requested. Best to rely on its default than hardcoding a
specific one in gst-omx.
https://bugzilla.gnome.org/show_bug.cgi?id=794319
2018-03-06 14:16:56 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264utils.c:
omxh264: sync with supported profiles on zynqultrascaleplus
Add extra supported AVC profiles and remove extended and 4:4:4 profiles
which are actually not implemented.
https://bugzilla.gnome.org/show_bug.cgi?id=794177
2018-03-06 10:45:14 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
* omx/gstomxh264utils.c:
* omx/gstomxh264utils.h:
omxh264: factor out gst_omx_h264_utils_get_profile_from_enum()
Move the profile <-> enum mapping to one place. Make changes easier as
I'm about to add extra profiles.
No semantic change.
https://bugzilla.gnome.org/show_bug.cgi?id=794177
2018-03-06 11:02:44 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh265utils.c:
omxh265: add format range extension profiles on zynqultrascaleplus
The zynqultrascaleplus OMX gained support for more format range
extensions profiles (A.3.5).
https://bugzilla.gnome.org/show_bug.cgi?id=794177
2018-03-06 10:45:14 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh265enc.c:
* omx/gstomxh265utils.c:
* omx/gstomxh265utils.h:
omxh265: factor out gst_omx_h265_utils_get_profile_from_enum()
Move the profile <-> enum mapping to one place. Make changes easier as
I'm about to add some profiles.
No semantic change.
https://bugzilla.gnome.org/show_bug.cgi?id=794177
2018-03-08 12:22:26 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: add NV16 support
NV16 format wasn't supported on encoder input while it was on decoder
output.
https://bugzilla.gnome.org/show_bug.cgi?id=794175
2018-03-08 12:09:38 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideo.c:
omxvideo: display port number when listing supported formats
More convenient when debugging.
https://bugzilla.gnome.org/show_bug.cgi?id=794175
2018-03-29 16:42:40 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: restore OMX default target-bitrate if requested by user
0xffffffff is the magic number in gst-omx meaning 'the default value
defined in OMX'. This works fine with OMX parameters which are only set
once when starting the component but not with configs which can be
changed while PLAYING.
Save the actual OMX default bitrate so we can restore it later if user
sets back 0xffffffff on the property.
Added GST_OMX_PROP_OMX_DEFAULT so we stop hardcoding magic numbers
everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=794998
2018-03-29 11:36:00 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: use gst_omx_video_enc_set_bitrate() when setting bitrate in set_format
We weren't using the usual pattern when re-setting the bitrate:
- get parameters from OMX
- update only the fields different from 0xffffffff (OMX defaults)
- set parameters
Also added a comment explaining why we re-set this param.
https://bugzilla.gnome.org/show_bug.cgi?id=794998
2018-03-29 11:26:04 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: factor out gst_omx_video_enc_set_bitrate()
No semantic change, I'm about to re-use this function in set_format().
https://bugzilla.gnome.org/show_bug.cgi?id=794998
2018-04-20 11:54:14 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: fix miscellaneous meson warnings
cc.has_header*() doesn't have a 'required:' kwarg.
2018-04-18 12:42:55 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideoenc/dec: fix handling of component enabling failing
- Report the error from OMX if any (OMX_EventError)
- If not report the failing to the application (GST_ELEMENT_ERROR)
- return GST_FLOW_ERROR rather than FALSE
- don't leak @frame
https://bugzilla.gnome.org/show_bug.cgi?id=795352
2018-04-16 10:53:41 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From 3fa2c9e to ed78bee
2018-03-14 14:53:50 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
log_omx_performance: convert pointers to strings
G_TYPE_POINTER are not serialized in logs.
https://bugzilla.gnome.org/show_bug.cgi?id=794331
2018-04-02 15:14:51 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: remove duplicated debug message
We already have the exact same message at the beginning of
gst_omx_video_enc_handle_frame(). Having it twice is confusing when
reading/grepping logs.
I kept the earlier one to keep the symetry with
gst_omx_video_dec_handle_frame().
https://bugzilla.gnome.org/show_bug.cgi?id=794897
2018-02-22 11:27:03 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: add 'roi' qp-mode on zynqultrascaleplus
New QP mode used to handle ROI metadata.
https://bugzilla.gnome.org/show_bug.cgi?id=793696
2018-03-20 10:31:10 +0000 Tim-Philipp Müller <tim@centricular.com>
* NEWS:
* RELEASE:
* configure.ac:
* meson.build:
Back to development
=== release 1.14.0 ===
2018-03-19 20:31:02 +0000 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.14.0
=== release 1.13.91 ===
2018-03-13 19:32:39 +0000 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.13.91
2018-03-09 12:02:29 +0000 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: fix typo in package name define
2018-02-27 15:42:53 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh265enc.c:
* omx/gstomxh265utils.c:
omxh265: update 422 profile names
h265parse is gaining support for the format range extension profile
(bgo#793876).
Use the profile names defined in h265parse.
https://bugzilla.gnome.org/show_bug.cgi?id=793928
2018-03-05 13:49:18 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Don't drop the frame on empty payload
This otherwise may lead to "No reference frame found" warning.
2018-03-01 15:16:55 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: Don't drop the frame on empty payload
This otherwise may lead to "No reference frame found" warning.
2018-03-02 15:36:06 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomx.c:
omx: Free empty buffers list in use_dynamic_buffers
To indicate we are doing dynamic buffers importation, we pass
a list of NULL pointers, but we forgot to free that list.
2018-03-01 15:16:32 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: Fix CodecState leak
=== release 1.13.90 ===
2018-03-03 23:00:59 +0000 Tim-Philipp Müller <tim@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.13.90
2018-03-03 20:21:06 +0000 Tim-Philipp Müller <tim@centricular.com>
* config/Makefile.am:
config: dist tizonia config files
2018-03-02 11:06:08 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomx.c:
Revert "omx: wait for flush complete and buffers being released when flushing"
This reverts commit 4211e4c29a262f110cb92ddf9c06b403ced233ef.
2018-02-21 12:50:42 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
videoenc: don't set stride padding to 0 when copying frames
Padding can be left undefined there is no point filling it with 0.
https://bugzilla.gnome.org/show_bug.cgi?id=793694
2018-02-16 11:50:35 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxbufferpool.c:
* omx/gstomxh264enc.c:
* omx/gstomxh265enc.c:
* omx/gstomxvideo.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
add support for NV12_10LE32 and NV16_10LE32 on zynqultrascaleplus
The encoder and decoder on zynqultrascaleplus support these new 10 bits
format.
https://bugzilla.gnome.org/show_bug.cgi?id=793694
2018-02-16 11:46:47 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: factor out gst_omx_video_enc_nv12_manual_copy()
No semantic change, I'm going to re-use it to copy the NV12_10LE32
format.
https://bugzilla.gnome.org/show_bug.cgi?id=793694
2018-01-17 10:40:49 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: display the computed buffer size when configuring input
https://bugzilla.gnome.org/show_bug.cgi?id=793694
2018-02-06 14:25:57 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
videoenc: implement ROI on zynqultrascaleplus
Check input buffers for ROI meta and pass them to the encoder by using
zynqultrascaleplus's custom OMX extension. Also add a new
"default-roi-quality" in order to tell the encoder what quality level
should be applied to ROI by default.
https://bugzilla.gnome.org/show_bug.cgi?id=793696
2018-02-14 17:23:39 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: remove GST_PARAM_MUTABLE_PLAYING from 'max-bitrate' property
This property isn't actually mutable in the PLAYING state.
https://bugzilla.gnome.org/show_bug.cgi?id=793458
2018-02-14 17:20:02 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: protect target_bitrate with the object lock
The 'target-bitrate' property can be changed while PLAYING
(GST_PARAM_MUTABLE_PLAYING). Make it thread-safe to prevent concurrent
accesses between the application and streaming thread.
https://bugzilla.gnome.org/show_bug.cgi?id=793458
2018-02-20 11:46:49 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxbufferpool.c:
omxbufferpool: add PERFORMANCE DEBUG message when copying output frames
I spent quiet some time figuring out why performance of my pipeline were
terrible. Turned out it was because of output frames being copied
because of stride/offset mismatch.
Add a PERFORMANCE DEBUG message to make it easier to spot and debug from logs.
https://bugzilla.gnome.org/show_bug.cgi?id=793637
2018-02-15 19:44:37 +0000 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
* meson.build:
Back to development
=== release 1.13.1 ===
2018-02-15 17:50:14 +0000 Tim-Philipp Müller <tim@centricular.com>
* Makefile.am:
* NEWS:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.13.1
2017-06-30 15:15:06 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh265enc.c:
omxh265enc: fix typo in "periodicty-idr" property name
Also fix the 'nick' of the property.
omxh265enc is based on the code from omxh264enc and suffers the same
typo as we fixed in https://bugzilla.gnome.org/show_bug.cgi?id=784370
This element isn't part of a stable release yet so it's not an API
break.
https://bugzilla.gnome.org/show_bug.cgi?id=793390
2018-02-08 19:18:59 +0000 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: make version numbers ints and fix int/string comparison
WARNING: Trying to compare values of different types (str, int).
The result of this is undefined and will become a hard error
in a future Meson release.
Also remove unused libversion/soversion.
2017-12-12 16:50:00 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* configure.ac:
* meson.build:
* omx/gstomx.h:
include all OMX extension headers if present
The OMX specs defines 8 headers that implementations can use to define
their custom extensions. We were checking and including 3 and ignoring
the other ones.
https://bugzilla.gnome.org/show_bug.cgi?id=792043
2018-01-30 10:31:03 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* meson.build:
* omx/meson.build:
* tools/meson.build:
meson: simplify OMX extensions detection
We are now always checking which files are present or not, even when using our
internal copy of OMX, rather than hardcoding the ones present in it.
https://bugzilla.gnome.org/show_bug.cgi?id=792043
2018-01-30 11:54:24 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* meson.build:
* omx/meson.build:
* tools/meson.build:
Revert "meson: use include_directories() with external OMX headers path"
This reverts commit 9d37a92a615e54e8ee12f8c65bcfe386ec9de2d0.
2017-11-27 14:52:10 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh265enc.c:
* omx/gstomxh265enc.h:
omxh265enc: add some encoding properties
constrained-intra-prediction and loop-filter-mode.
Those map standard OMX settings.
https://bugzilla.gnome.org/show_bug.cgi?id=792528
2017-11-23 15:54:15 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: add some encoding properties
entropy-mode, constrained-intra-prediction and loop-filter-mode.
Those map standard OMX settings.
https://bugzilla.gnome.org/show_bug.cgi?id=792528
2017-06-08 12:31:21 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: add zynqultrascaleplus specific properties
https://bugzilla.gnome.org/show_bug.cgi?id=792528
2017-10-31 12:24:39 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: document unit of target-bitrate property
nTargetBitrate and nEncodeBitrate are defined in bits per second in the
OMX spec.
https://bugzilla.gnome.org/show_bug.cgi?id=792528
2017-07-06 10:18:48 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: add internal-entropy-buffers property on zynqultrascaleplus
Custom property to control the number of internal buffers used in the
decoder to smooth out entropy decoding performance.
https://bugzilla.gnome.org/show_bug.cgi?id=792528
2018-01-30 10:31:03 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* meson.build:
* omx/meson.build:
* tools/meson.build:
meson: use include_directories() with external OMX headers path
It seems cleaner to use the proper meson tools to include this path
rather than manually tweak the build flags.
This also allows us to simplify the OMX extensions detection code. We
are now always checking which files are present, even when using our
internal copy of OMX, rather than hardcoding the ones present in it.
https://bugzilla.gnome.org/show_bug.cgi?id=792043
2017-11-07 15:09:35 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: expose chroma format and bit depth in output caps
As we added in the parser (bgo#792039) expose the chroma and bit
depth information in output caps.
https://bugzilla.gnome.org/show_bug.cgi?id=792040
2017-11-07 14:30:45 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: factor out get_output_caps()
No semantic change so far.
https://bugzilla.gnome.org/show_bug.cgi?id=792040
2017-12-29 11:59:36 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* config/zynqultrascaleplus/gstomx.conf:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omxvideodec: add hack to pass color format from caps to OMX decoder
This hack tries to pass as much information as possible from caps to the
decoder before it receives any buffer. These information can be used by
the OMX decoder to, for example, pre-allocate its internal buffers
before starting to decode and so reduce its initial latency.
This mechanism is currently supported by the zynqultrascaleplus decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=792040
2017-12-01 12:43:19 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
log failing OMX calls as errors
I find it confusing when debugging that OMX calls returning an error
where not logged as GST_LEVEL_ERROR making them harder to spot.
Fix this by introducing simple log macros checking the return value of
the OMX call and logging failures as errors.
https://bugzilla.gnome.org/show_bug.cgi?id=791069
2017-10-30 11:59:19 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
add OMX_PERFORMANCE debug category
Can be used to log buffers exchange between OMX and gst-omx to profile
performances of the OMX component.
Ideally this should be done using tracer hooks but it's currently not
possible to define custom hooks outside of core.
Use GST_DEBUG="OMX_PERFORMANCE:8" to enable it.
See also
https://github.com/gdesmott/gst-log-parser/blob/master/src/bin/omx-perf.rs
as a simple program consuming those logs to generate gnuplot files and
stats.
https://bugzilla.gnome.org/show_bug.cgi?id=791093
2017-07-27 11:21:59 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: implement dmabuf import on zynqultrascaleplus
The Zynq UltraScale+ encoder implements a custom OMX extension to
directly import dmabuf saving the need of mapping input buffers.
This can be use with either 'v4l2src io-mode=dmabuf' or an OMX video
decoder upstream.
https://bugzilla.gnome.org/show_bug.cgi?id=792361
2017-09-22 16:02:40 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: drop late input frames if QoS is enabled
Make use of the new GstVideoEncoder QoS API to drop late input frames. This may
help a live pipeline to catch up if it's being late and all frames end up
being dropped at the sink.
https://bugzilla.gnome.org/show_bug.cgi?id=792783
2018-01-19 15:18:23 +0530 Ashish Kumar <kr.ashish@samsung.com>
* examples/egl/testegl.c:
TestEgl: Removed redundant/unused code
https://bugzilla.gnome.org/show_bug.cgi?id=788550
2018-01-03 16:07:18 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: early return in fill_buffer() if something goes wrong
If something goes wrong while trying to manually copy the input buffer,
the 'break' was moving us out of the 'for' loop but not out of the switch block.
So we ended up calling gst_video_frame_unmap() a second time (raising
assertions) and returning TRUE rather than FALSE.
Reproduced with a WIP zynqultrascaleplus OMX branch reporting wrong
buffer sizes and so triggering this bug.
https://bugzilla.gnome.org/show_bug.cgi?id=792167
2017-12-19 16:09:41 +0000 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: gl: the winsys and platform list in the .pc file is space-separated
2017-12-19 16:08:58 +0000 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: fix subproject fallback for gstreamer-gl-1.0
It's now in -base.
2017-12-12 17:30:27 +0000 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
omxvideodec: ignore very little variations of the framerate
If less than 1%.
The dynamic format change should not happen when the
resolution does not change and when only the framerate
changes but very slightly, i.e. from 50000/1677=29.81
to 89/3=29.66 so a "percentage change" of less than 1%
(i.e. 100*(29.81-29.66)/29.66 = 0.50 < 1 ). In that case
just ignore it to avoid unnecessary renegotiation.
https://bugzilla.gnome.org/show_bug.cgi?id=759043
2017-08-09 12:07:33 -0400 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: use dynamic buffer mode on input if possible
Prevent from copying the input buffers between GStreamer and OMX.
Tested on zynqultrascaleplus and rpi (without dynamic buffers).
https://bugzilla.gnome.org/show_bug.cgi?id=787093
2017-07-20 16:35:31 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: use dynamic buffer mode on input if possible
If the OMX component supports dynamic buffer mode and the input buffers
are properly aligned avoid copying each input frame between OMX and
GStreamer.
Tested on zynqultrascaleplus and rpi (without dynamic buffers).
https://bugzilla.gnome.org/show_bug.cgi?id=787093
2017-07-20 12:56:37 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideoenc/dec: factor out input buffer allocation
No semantic change so far. I'm going to add an alternate way to allocate
input buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=787093
2017-07-20 16:31:54 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: add API to implement dynamic buffers support
OMX 1.2.0 introduced a third way to manage buffers by allowing
components to only allocate buffers header during their initialization
and change their pBuffer pointer at runtime.
This new feature can save us a copy between GStreamer and OMX for each
input buffer.
This patch adds API to allocate and use such buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=787093
2017-12-14 14:53:17 +1100 Matthew Waters <matthew@centricular.com>
* common:
Automatic update of common submodule
From e8c7a71 to 3fa2c9e
2017-12-13 12:06:40 +0000 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideodec.c:
omxvideodec: consolidate the decision to try UseBuffer
The tee element can call gst_query_add_allocation_pool with pool as NULL.
Checking nth > 0 is not enough so we need to verify if there is a pool.
https://bugzilla.gnome.org/show_bug.cgi?id=730758
https://bugzilla.gnome.org/show_bug.cgi?id=784069
2017-12-12 14:45:30 +0000 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
gstomxvideodec: fix framerate overflow
Some live streams can set the framerate to 50000/1677 (=29.81).
GstVideoInfo.fps_n << 16 is wrong if the fps_n is 50000
(i.e. greater than 32767).
https://bugzilla.gnome.org/show_bug.cgi?id=759043
2017-08-22 13:48:26 +0100 Julien Isorce <jisorce@oblong.com>
* configure.ac:
* examples/egl/Makefile.am:
* examples/egl/meson.build:
* examples/egl/testegl.c:
* meson.build:
example: port testegl.c to desktop
Will be easier to maintain.
Also uniformize autotool build with meson build which is
already retrieving the gl libs.
https://bugzilla.gnome.org/show_bug.cgi?id=781606
2017-12-11 15:55:44 +0000 Julien Isorce <jisorce@oblong.com>
* meson.build:
meson: move omx features check after target selection
And uses gst_omx_args instead of add_global_arguments.
Similar to c69232852120d064c689caef07b3c68ad8fe6288
which was only for configure.ac
Useful to get omxvp8dec with meson too:
meson . buildtmp -D with_omx_target=tizonia
https://bugzilla.gnome.org/show_bug.cgi?id=782800
2017-12-04 17:11:04 +0000 Julien Isorce <jisorce@oblong.com>
* config/tizonia/gstomx.conf.in:
config: add OMX.Aratelia.audio_decoder.aac to Tizonia config
Useful mostly for testing/debugging purpose as this is a software
based decoder (libfaad) for which GStreamer provides a direct
wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=791482
2017-11-29 14:18:41 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: retrieve OMX_IndexParamVideoPortFormat before setting it
The usual pattern when setting OMX params is to first get the struct
param, override the values we want to set and then set the updated
param.
We were not doing this with OMX_IndexParamVideoPortFormat and so were
resetting some fields such as OMX_VIDEO_PARAM_PORTFORMATTYPE.xFramerate
https://bugzilla.gnome.org/show_bug.cgi?id=790979
2017-05-21 17:34:51 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxaacenc.c:
omxaacenc: also set 'profile' if mpegversion is 4
Like done by gst_codec_utils_aac_caps_set_level_and_profile
which is called by avenc_aac, ffaac and voaacenc.
https://bugzilla.gnome.org/show_bug.cgi?id=735208
2017-10-24 12:19:50 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: wait for flush complete and buffers being released when flushing
As stated in the existing comment, when flusing we should wait for OMX
to send the flush command complete event AND all ports being released.
We were stopping as soon as one of those condition was met.
Fix a race between FillThisBufferDone/EmptyBufferDone and the flush
EventCmdComplete messages. The OMX implementation is supposed to release
its buffers before posting the EventCmdComplete event but the ordering
isn't guaranteed as the FillThisBufferDone/EmptyBufferDone and
EventHandler callbacks can be called from different threads (cf 2.7
'Thread Safety' in the spec).
https://bugzilla.gnome.org/show_bug.cgi?id=789475
2017-10-24 11:45:20 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
gst_omx_port_set_flushing: simplify waiting loop
No semantic change so far, I just made the 'while' end condition easier
to understand as a first step before changing it.
- move error/time out checks inside the loop to make it clearer on what
we are actually waiting for.
- group port->buffers checks together with parenthesis as they are part
of the same conceptual check: waiting for all buffers to be released.
https://bugzilla.gnome.org/show_bug.cgi?id=789475
2017-11-27 20:17:17 +1100 Matthew Waters <matthew@centricular.com>
* common:
Automatic update of common submodule
From 3f4aa96 to e8c7a71
2017-11-23 15:03:48 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
* omx/gstomxh264utils.c:
zynqultrascaleplus: add support for extra AVC levels
The Zynqultrascaleplus has support for extra AVC levels not defined in
the OMX spec as a customer extension.
https://bugzilla.gnome.org/show_bug.cgi?id=790758
2017-10-16 14:47:07 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* .gitignore:
* Makefile.am:
* config/meson.build:
* configure.ac:
* meson.build:
* tests/Makefile.am:
* tests/check/.gitignore:
* tests/check/Makefile.am:
* tests/check/generic/.gitignore:
* tests/check/generic/states.c:
* tests/check/meson.build:
* tests/meson.build:
add test support
Most of the boilerplate and the states test has been copied from
gst-plugins-good.
https://bugzilla.gnome.org/show_bug.cgi?id=789094
2017-10-17 13:07:05 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* meson.build:
* tools/meson.build:
meson: add tools support
Looks like the tools directory was left out during the initial port to
meson.
https://bugzilla.gnome.org/show_bug.cgi?id=789090
2017-10-16 14:24:50 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: fix build on rpi
The nTimeStamp field is a OMX_TICKS struct on the rpi so use the proper
macro to set it.
Fix build on the build which has been broken by
b3173144b7c1b12c9e1b7571f78659be45d813f6
https://bugzilla.gnome.org/show_bug.cgi?id=789052
2017-10-17 12:11:04 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* configure.ac:
* meson.build:
check if Allegro headers are present when building zynqultrascaleplus
The Zynq UltraScale+ uses a custom version of OMX implementing several
3rd party extensions. Make sure those are present when building this
target.
https://bugzilla.gnome.org/show_bug.cgi?id=788064
2017-10-16 12:42:44 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: remove redundant debug message
We have already a debug message right after.
https://bugzilla.gnome.org/show_bug.cgi?id=789058
2017-10-16 13:26:38 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh265enc.c:
* omx/gstomxh265utils.c:
omxh265: fix enum casting when using Allegro HEVC extensions
Allegro's HEVC implementation defines a superset of the profiles and
enums from the Android implementation.
Properly cast to fix -Wenum-conversion warnings from clang.
https://bugzilla.gnome.org/show_bug.cgi?id=789057
2017-10-16 13:08:12 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh265enc.c:
* omx/gstomxvp8dec.c:
properly cast extension enums
OMX's allow 3rds party to define extensions using their own enums
(like OMX_VIDEO_CODINGEXTTYPE) and to be used as the general
ones (like OMX_VIDEO_CODINGTYPE).
Properly cast those to fix -Wenum-conversion warnings from some
compilers such as clang.
https://bugzilla.gnome.org/show_bug.cgi?id=789057
2017-10-09 13:12:35 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: also reset nTimeStamp when re-using buffers
Some OMX implementations may check if the timestamp of the output buffers
they receive is actually not set.
https://bugzilla.gnome.org/show_bug.cgi?id=788711
2017-10-04 17:11:55 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: factor out gst_omx_buffer_reset()
https://bugzilla.gnome.org/show_bug.cgi?id=788711
2017-10-09 17:27:22 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
add gst_omx_buffer_flags_to_string()
Make debug logs more readable so users don't have to manually figure out
the meaning of flags.
https://bugzilla.gnome.org/show_bug.cgi?id=788767
2017-09-27 19:47:29 +0530 Ponnam Srinivas <p.srinivas@samsung.com>
* omx/gstomxh263enc.c:
h263enc: fix caps leak in error code path
https://bugzilla.gnome.org/show_bug.cgi?id=788245
2017-09-21 15:21:36 +0530 Ponnam Srinivas <p.srinivas@samsung.com>
* omx/gstomxh264enc.c:
omxh264enc: fix caps leak
https://bugzilla.gnome.org/show_bug.cgi?id=787711
2017-09-21 11:36:46 +0530 Ponnam Srinivas <p.srinivas@samsung.com>
* omx/gstomxh265enc.c:
omxh265enc: fix caps leak
https://bugzilla.gnome.org/show_bug.cgi?id=787714
2017-09-13 15:32:51 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: log info about frame before releasing it
gst_video_decoder_release_frame() takes ownership of the frame and will
destroy it. So we should no longer use it after calling it.
https://bugzilla.gnome.org/show_bug.cgi?id=787628
2017-08-20 20:19:33 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* configure.ac:
configure: Show tizonia target in help
https://bugzilla.gnome.org/show_bug.cgi?id=786544
2017-07-12 14:35:10 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* config/zynqultrascaleplus/gstomx.conf:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh265dec.c:
* omx/gstomxh265dec.h:
* omx/meson.build:
omxh265dec: add H265 decoder
Add HEVC decoder for the zynqultrascaleplus platform.
I used the H264 decoder code as a template.
https://bugzilla.gnome.org/show_bug.cgi?id=785434
2017-07-12 11:01:15 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* config/zynqultrascaleplus/gstomx.conf:
* configure.ac:
* meson.build:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh265enc.c:
* omx/gstomxh265enc.h:
* omx/gstomxh265utils.c:
* omx/gstomxh265utils.h:
* omx/meson.build:
omxh265enc: add H265 encoder
The OMX spec doesn't support HEVC but the OMX stack of the
zynqultrascaleplus adds it as a custom extension.
It uses the same API as the one of Android's OMX stack.
I used the H264 encoder code as a template.
https://bugzilla.gnome.org/show_bug.cgi?id=785434
2017-08-28 13:56:22 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: use caps from query in propose_allocation
Prevent crash by not deferencing a NULL pointer if self->input_state
isn't defined when propose_allocation() is called.
https://bugzilla.gnome.org/show_bug.cgi?id=786442
2017-09-04 09:34:03 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: display states as string if changing failed
Improve the error message by displaying the states in their string
representation rather than their numerical value.
https://bugzilla.gnome.org/show_bug.cgi?id=787235
2017-08-22 10:22:45 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideodec.c:
omxvideodec: EGLDisplay is not indirectly defined by gstgl headers inclusion
Just use gpointer as done in GstGL to not include
EGL/egl.h just for EGLDisplay.
https://bugzilla.gnome.org/show_bug.cgi?id=784779
2017-07-14 16:34:04 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* config/tizonia/gstomx.conf.in:
config: expose OMX.mesa h264 decoder and encoder in Tizonia config
https://bugzilla.gnome.org/show_bug.cgi?id=783976
2017-08-11 07:48:37 -0700 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideodec.c:
omxvideodec: remove wrong SettingsChanged ack
Partially revert 1b7d0b8:
omxvideodec: handle IL 1.2 behavior for OMX_SetParameter
It turned out it was a problem in the decoder which was
not updating some local variables upon SetParameter.
https://bugzilla.gnome.org/show_bug.cgi?id=783976
2017-07-20 09:43:19 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxaudiodec.c:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx{audio,video}{dec,enc}: sequentially disable ports because buffers are not shared
For the history, the parallel disable port has been introduced by:
"00be69f omxvideodec: Disable output port when setting a new format"
and then replicated to videoenc, audiodec and audioenc.
This is only required to do 'parallel' if buffers are shared between ports.
But for decoders and encoders the input and output buffer are of different
nature by definition (bitstream vs images). So they cannot be shared.
Also starting from IL 1.2.0 it is written in the spec that the parallel
disable is not allowed and will return an error. Except when buffers are
shared.
Again here we know in advance that they are not shared so let's always
do a sequential disable.
Tested on Desktop, rpi and zynqultrascaleplus.
https://bugzilla.gnome.org/show_bug.cgi?id=786348
2017-08-17 12:26:05 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From 48a5d85 to 3f4aa96
2017-08-10 12:16:53 -0400 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: use the decoder API to set latency
https://bugzilla.gnome.org/show_bug.cgi?id=785125
2017-07-06 14:19:19 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideoenc/dec: declare latency on zynqultrascaleplus
The OMX specification doesn't provide any API to expose the latency
introduced by encoders and decoders. We implemented this as a custom
extension as declaring the latency is needed for live pipelines like
video conferencing.
https://bugzilla.gnome.org/show_bug.cgi?id=785125
2017-08-07 13:16:01 -0400 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: adjust stride and slice height from input
Use the stride and slice height information from the first buffer meta
data to adjust the settings of the input port.
This will ensure that the OMX input buffers match the GStreamer ones
and so will save us from having to copy line-by-line each one.
This is also the first step to allow the OMX encoder to receive dmabuf.
Tested on rpi and zynqultrascaleplus.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
2017-08-07 11:45:29 -0400 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: delay buffer configuration until component is enabled
No significant change for now. Just delay the input port configuration
of the buffer size related fields (stride, slice height, buffer size)
until the component is activated.
This will allow us to use the actual stride/height of the first input
and so avoid the buffer copying code path in most cases.
Tested on rpi and zynqultrascaleplus.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
2017-07-24 13:52:35 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideodec/enc: delay allocation after the allocation query
Allocating OMX components buffers in set_format() is too early.
Doing it when receiving the first buffers will allow the element to use
the information from the allocation query and/or the first incoming
buffer to pick to best allocation mode.
Tested on raspberry pi with dynamic resolution changes on decoder and
encoder input.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
2017-07-25 14:27:45 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: start src thread in handle_frame()
Makes the code simpler as we no longer need to restart the thread in
gst_omx_video_enc_flush() and It's more symetric which the omxvideodec
implementation.
I'm also going to move the enabling of the OMX component in
handle_frame() and the src pad thread needs to be started after it.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
2017-07-25 14:07:30 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: earlier return if downstream_flow_ret is not OK
There is no point to (re)start the src thread if, for example, we are
flushing.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
2017-07-24 12:31:37 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: factor out enable and disable code
No semantic change, just factor out the code enabling and disabling the
component to their own functions.
Makes the code easier to read as the set_format() method was already
pretty big. Will also allow us to easily change the enabling logic.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
2017-07-24 12:31:37 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: factor out enable and disable code
No semantic change, just factor out the code enabling and disabling the
component to their own functions.
Makes the code easier to read as the set_format() method was already
pretty big. Will also allow us to easily change the enabling logic.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
2017-07-27 12:12:01 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomx.c:
omx: also reset nFilledLen before calling OMX_FillThisBuffer()
The spec states that the buffer passed to OMX_FillThisBuffer() needs to be
empty. Some implementation may check it actually is by checking its
nFilledLen field, so best to reset it as well.
https://bugzilla.gnome.org/show_bug.cgi?id=785623
2017-07-17 21:06:47 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: make generic the OMX_UseEGLImage code path
Will be easier to maintain and to make enhancements.
Tested with Tizonia on Desktop.
Also tested with Bellagio to make sure it does not crash when
calling OMX_UseEGLImage and indeed it returns NotImplemented.
Then gst-omx fallback to OMX_UseBuffer if it can and so on.
Also tested on rpi to make sure there is no regression.
https://bugzilla.gnome.org/show_bug.cgi?id=784365
2017-07-21 11:52:00 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: Fix segment seek
On segment seek, unlike EOS, we drain, but we cannot expect a flush
later to reset the decoder state. As a side effect, the decoder would
remain in EOS state and ignore any new incoming buffers.
To fix this, we call _flush() inside the _drain() function, and
_finish() becomes what _drain() was before. This way, for _finish() (the
eos case) we only drain, for _drain() triggered by segment seek or new
caps, we also reset the decoder state so it's ready to accept buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=785237
2017-07-10 15:00:58 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: ensure enough buffers are allocated in the pool
Handle allocation query and ensure enough buffers are allocated in
the negotiated pool. This help preventing buffer starvation in the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=785122
2017-07-04 12:16:39 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* configure.ac:
* meson.build:
* omx/Makefile.am:
* omx/gstomxbufferpool.c:
* omx/gstomxbufferpool.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/meson.build:
omxvideodec: add dmabuf support for output
The zynqultrascaleplus OMX implementation has a custom extension
allowing decoders to output dmabuf and so avoid buffers copy between OMX
and GStreamer.
Make use of this extension when built on the zynqultrascaleplus. The
buffer pool code should be re-usable for other platforms as well.
https://bugzilla.gnome.org/show_bug.cgi?id=784847
2017-06-20 00:13:33 +0100 Julien Isorce <jisorce@oblong.com>
* config/tizonia/gstomx.conf.in:
config: add OMX.Aratelia.video_decoder.vp8 to Tizonia config
Useful mostly for testing/debugging purpose as this is a software
based encoder (libvpxdec) for which GStreamer provides a direct
wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=783976
2017-06-19 23:56:02 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideodec.c:
omxvideodec: handle IL 1.2 behavior for OMX_SetParameter
It triggers SettingsChanged on the other port and it is up to
the client to decide if it should lead to a port reconfiguration.
Settings are propagated to the other port for fields they have
in common. But this event is only triggered on the other port
if it actually change a setting.
https://bugzilla.gnome.org/show_bug.cgi?id=783976
2017-07-18 23:41:17 +0100 Julien Isorce <jisorce@oblong.com>
* config/tizonia/gstomx.conf.in:
config: set rank to 0 for Tizonia's mp3 decoder
Should have been 0 from the initial commit
eed49b4231a063639f90279c8044404c2149902a
2017-07-17 21:03:55 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideodec.c:
omxvideodec: fix file permissions
Introduced by ebc9b4903cbdac2793c24b05a1bb7acc3b67fae5
2017-06-29 23:17:26 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideodec.c:
omxvideodec: fix buffer leak when eglimage setup fails
Can happen if gst_buffer_pool_acquire_buffer succeeds but
gst_buffer_n_memory (buffer) is not exactly 1.
In theory this should not happen because the decoder requests
EGLImage(RGBA) but better to fix any leak on corner cases.
https://bugzilla.gnome.org/show_bug.cgi?id=784365
2017-07-17 18:36:36 +0530 Satya Prakash Gupta <sp.gupta@samsung.com>
* omx/gstomx.c:
omx: Possible Memory leak in gst_caps_from_string
https://bugzilla.gnome.org/show_bug.cgi?id=784978
2017-07-17 15:48:44 +0530 Satya Prakash Gupta <sp.gupta@samsung.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix deadlock in error case when draining
https://bugzilla.gnome.org/show_bug.cgi?id=784972
2017-07-17 13:44:54 +0530 Satya Prakash Gupta <sp.gupta@samsung.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Fix deadlock in error case when draining
https://bugzilla.gnome.org/show_bug.cgi?id=784967
2017-06-02 12:36:30 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* configure.ac:
* meson.build:
* omx/gstomx.h:
build: include OMX_IndexExt and OMX_ComponentExt if present
These files may be used by OMX implementation to define custom extensions.
Include them if present as we are already doing with OMX_VideoExt.h
https://bugzilla.gnome.org/show_bug.cgi?id=784847
2017-07-13 16:40:26 +1000 Jan Schmidt <jan@centricular.com>
* omx/gstomxh264enc.c:
omxh264enc: Re-add periodicty-idr property for backward compat
Retain backwards compatibility by adding a duplicate
property for periodicty-idr
https://bugzilla.gnome.org/show_bug.cgi?id=784370
2017-06-30 15:15:06 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: fix typo in "periodicty-idr" property name
Also fix the 'nick' of the property.
https://bugzilla.gnome.org/show_bug.cgi?id=784370
2017-06-29 22:48:47 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: use OMX_UseBuffer
For example this allows the omx decoder to directly fill the
pixmaps coming from the video sink.
It only avoids a buffer copy when the decoder uses a pool provided
by a downstream element. So let's restrict this usage to situations
where the decoder decides to use a downstream buffer pool.
Tested with Tizonia/OMX.Aratelia.video_decoder.vp8
and with Bellagio/OMX.mesa.video_decoder.avc.
If it fails to setup buffers with OMX_UseBuffer the decoders
fallbacks to usual OMX_AllocateBuffer.
Also it allows to test on desktop the GstOMXBufferPool->other_pool
management which was previously only used in the OMX_UseEGLImage
case, i.e. on Rpi.
https://bugzilla.gnome.org/show_bug.cgi?id=784069
2017-07-12 10:29:16 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomx.c:
omx: do not always print an error if OMX_{UseBuffer,EGLImage} fails
Let the caller decide to print an error. Because it can be part of
a normal trial path.
https://bugzilla.gnome.org/show_bug.cgi?id=784069
2017-07-12 16:00:53 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/meson.build:
meson: add gstomxmp3enc
Commit 02d493e85921596f7cac7ef4af02fde500e9a5d8 didn't add
gstomxmp3enc.c to meson.
https://bugzilla.gnome.org/show_bug.cgi?id=784848
2017-05-23 10:32:58 +0100 Julien Isorce <jisorce@oblong.com>
* config/tizonia/gstomx.conf.in:
config: add OMX.Aratelia.audio_encoder.mp3 to Tizonia config
Useful mostly for testing/debugging purpose as this is a software
based encoder (libmp3lame) for which GStreamer provides a direct
wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=782988
2017-05-23 10:32:06 +0100 Julien Isorce <jisorce@oblong.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxmp3enc.c:
* omx/gstomxmp3enc.h:
omx: add gstomxmp3enc
Initial support and only tested with the software based
encoder OMX.Aratelia.audio_encoder.mp3 from Tizonia which
internally uses libmp3lame.
https://bugzilla.gnome.org/show_bug.cgi?id=782988
2017-03-28 16:27:10 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* config/zynqultrascaleplus/gstomx.conf:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxh264dec.c:
h264dec: add hack to pass profile and level to OMX
This information can be useful to zynqultrascaleplus decoders. They may
use this information to reduce startup latency by configuring itself
before receiving the first frames.
We also have a custom OMX extension allowing the decoder to report the
latency. The profile/level information helps it reporting a more
accurate latency earlier.
https://bugzilla.gnome.org/show_bug.cgi?id=783114
2017-07-03 13:17:11 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomxh264enc.c:
* omx/gstomxh264utils.c:
* omx/gstomxh264utils.h:
* omx/meson.build:
omxh264enc: move profile and level parsing functions to their own files
Will allow to re-use them in the decoder element.
https://bugzilla.gnome.org/show_bug.cgi?id=783114
2017-07-04 03:15:00 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* config/meson.build:
* config/tizonia/meson.build:
* meson.build:
* meson_options.txt:
meson: Add tizonia option
https://bugzilla.gnome.org/show_bug.cgi?id=782800
2017-04-29 02:56:59 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* .gitignore:
* config/tizonia/Makefile.am:
* config/tizonia/gstomx.conf.in:
* config/tizonia/meson.build:
* configure.ac:
config: add omxmp3dec config for tizonia
GST_OMX_CONFIG_DIR=$HOME/gst/master/gst-omx/config/tizonia/ \
gst-launch-1.0 filesrc location=mpthreetest.mp3 ! id3demux ! \
mpegaudioparse ! omxmp3dec ! audioconvert ! pulsesink
v2: [Nicolas] Use template to create gstomx.conf using pkg-config
v3: [Nicolas] Ignore only config/tizonia/gstomx.conf
v4: [Nicolas] Add "/" for single occurence
https://bugzilla.gnome.org/show_bug.cgi?id=782800
2017-05-07 20:09:54 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* omx/gstomx.c:
omx: always ignore OMX_ErrorPortUnpopulated
It is safe to ignore it always. Tizonia notifies this error to pass
some khronos conformance tests. Problem is that gst-omx saves this
error in comp->last_error and then gst_omx_port_set_enabled early
error out which fails the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=782800
2017-04-29 02:53:26 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* omx/gstomx.c:
* omx/gstomx.h:
omx: guard some omx enums with IL version
Some enums that existed in 1.1.2 just do not exit in 1.2.0
See https://www.khronos.org/registry/OpenMAX-IL/specs/OpenMAX_IL_1_2_0_Specification_redline.pdf
https://bugzilla.gnome.org/show_bug.cgi?id=782800
2017-04-29 01:56:01 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* configure.ac:
configure.ac: add tizonia target for --with-omx-target flag.
This will check for tizilheaders.pc which adds path to omx-il
headers its cflags. Can be installed all together with the 1.2 headers
with package tizilheaders if not building from sources:
https://github.com/tizonia/tizonia-openmax-il
It is also adviced to remove libomxil-bellagio-dev package because
it installs headers /usr/include directly, ex: /usr/include/OMX_Video.h.
https://bugzilla.gnome.org/show_bug.cgi?id=782800
2017-07-05 10:47:41 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxaudioenc.c:
omxaudioenc: update local port_def after reopening the component
gst_omx_audio_enc_open will only update GstOMXAudioEnc->port->port_def.
Note that the component is reopen only if the flag
GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set.
https://bugzilla.gnome.org/show_bug.cgi?id=782418
2017-07-05 10:48:52 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomxvideoenc.c:
omxvideoenc: update local port_def after reopening the component
gst_omx_video_enc_open will only update GstOMXVideoEnc->port->port_def.
Note that the component is reopen only if the flag
GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set.
https://bugzilla.gnome.org/show_bug.cgi?id=782418
2017-05-10 12:38:39 +0900 Sejun Park <sejun79.park@samsung.com>
* omx/gstomxvideodec.c:
omxvideodec: update local port_def after reopening the component
gst_omx_video_dec_open will only update GstOMXVideoDec->port->port_def.
Note that the component is reopen only if the flag
GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set.
https://bugzilla.gnome.org/show_bug.cgi?id=782418
2017-07-03 16:33:06 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: increase the minimum number of allocated buffers
Ensure that enough buffers are allocated by adding up component's own
minimal plus the number of buffers requested by downstream.
This should prevent buffers starvation problem if downstream elements
are holding some of the buffers they required.
Also simplify the check on the maximum on buffers. What we actually care
about is to make sure the pool can hold the minimum of required buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=784479
2017-07-03 10:54:50 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: raise a warning if AVCIntraPeriod is not supported
Some platforms may not implement OMX_IndexConfigVideoAVCIntraPeriod and
use OMX_IndexParamVideoAvc instead to configure the GOP pattern.
So raise a warning instead of an error if this API is not implemented.
https://bugzilla.gnome.org/show_bug.cgi?id=784379
2017-06-29 14:16:19 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: add 'b-frames' property
Add a property to control the number of B-frames produced by the
encoder using the OMX_VIDEO_PARAM_AVCTYPE OMX API.
https://bugzilla.gnome.org/show_bug.cgi?id=784379
2017-06-30 14:18:35 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: fix typo in 'set_avc_intra_period'
https://bugzilla.gnome.org/show_bug.cgi?id=784379
2017-05-22 11:23:33 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* config/Makefile.am:
* config/meson.build:
* config/zynqultrascaleplus/Makefile.am:
* config/zynqultrascaleplus/gstomx.conf:
* config/zynqultrascaleplus/meson.build:
* configure.ac:
* meson.build:
* meson_options.txt:
add 'zynqultrascaleplus' as OMX target
Adding support for the 'Zynq UltraScale+' as a new OMX target.
See https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html
for details about the platform.
https://bugzilla.gnome.org/show_bug.cgi?id=783097
2017-05-21 15:23:09 +0100 Julien Isorce <jisorce@oblong.com>
* config/bellagio/gstomx.conf:
config: add OMX.mesa.video_decoder.{avc,mpeg2} for Bellagio config
Install libomxil-bellagio0 and make sure mesa has been built with
--enable-omx. Check there is /usr/lib/libomxil-bellagio0/libomx_mesa.so
then run omxregister-bellagio to regenerate $XDG_DATA_HOME/.omxregister
Then omxh264dec and omxmpeg2dec should load.
https://bugzilla.gnome.org/show_bug.cgi?id=782926
2017-05-18 13:50:56 +0100 Julien Isorce <jisorce@oblong.com>
* configure.ac:
configure.ac: move omx features check after target selection
Does not change anything, except this will be useful for future commits.
Indeed some targets provide a .pc file where to look for the omx headers.
https://bugzilla.gnome.org/show_bug.cgi?id=782800
2017-06-29 16:48:07 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264dec.c:
omxh264dec: remove 'parsed=true' from sink pad
The decoder only requires to receive one frame per buffer which is
already enforced with 'alignment=au'. There is no need to require to
have a parser upstream.
Allow to run "encode ! decode" pipeline without having a parser.
https://bugzilla.gnome.org/show_bug.cgi?id=784344
2017-06-16 13:28:33 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: set profile/level using OMX_VIDEO_PARAM_AVCTYPE as well
The OMX specification defines two API to set the AVC profile and level:
using OMX_VIDEO_PARAM_PROFILELEVELTYPE and OMX_VIDEO_PARAM_AVCTYPE.
We were already supporting the former but not the latter. We are now
setting both so implementation don't have to rely on a specific one.
https://bugzilla.gnome.org/show_bug.cgi?id=783862
2017-06-16 13:19:33 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: factor out update_param_profile_level()
https://bugzilla.gnome.org/show_bug.cgi?id=783862
2017-06-16 12:53:15 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: factor out string to profile/level enum conversion
https://bugzilla.gnome.org/show_bug.cgi?id=783862
2017-06-28 15:06:10 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: use OMX_IndexConfigBrcmVideoIntraPeriod on pi
The OMX_VIDEO_CONFIG_AVCINTRAPERIOD.nPFrames setting isn't of any use on
the raspbery pi. Instead it uses a custom extension to define the I
frame period.
https://bugzilla.gnome.org/show_bug.cgi?id=783829
2017-06-28 15:03:52 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: factor out set_avc_intra_perdiod()
https://bugzilla.gnome.org/show_bug.cgi?id=783829
2017-06-02 12:48:57 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* meson.build:
meson: define HAVE_VIDEO_EXT if OMX_VideoExt.h is present
Meson build wasn't defining the HAVE_VIDEO_EXT like configure.ac does.
https://bugzilla.gnome.org/show_bug.cgi?id=783346
2017-06-11 12:32:01 +0000 Graham Leggett <minfrin@sharp.fm>
* omx/gstomxvideoenc.c:
omxvideoenc: Improve debug output when setting codec state due to new codec_data fails
https://bugzilla.gnome.org/show_bug.cgi?id=783657
2017-05-20 14:49:20 +0100 Julien Isorce <jisorce@oblong.com>
* omx/gstomx.c:
omx: allow 0 feature
Previously the omx plugin was blacklisted if GST_OMX_CONFIG_DIR
points to an invalid path or if the gstomx.conf contains 0 valid
component.
Problem is that once the plugin is blacklisted, a rescan is not
triggered upon changes of the env var or the gstomx.conf file
despite being setup with gst_plugin_add_dependency.
This also makes it more consistent with other plugins that auto
generate features. For example gst-{ffmeg,libav}, gstreamer-vaapi,
v4l2 video dec.
To clarify the diff, the plugin_init func will return TRUE even if
g_key_file_get_groups returns 0 element and even if
g_key_file_load_from_dirs fails.
https://bugzilla.gnome.org/show_bug.cgi?id=782867
2017-04-26 22:52:17 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* config/bellagio/gstomx.conf:
config: add OMX.st.audio_decoder.mp3.mad for Bellagio config
MP3 Software decoder (libmad based) but useful for testing
and to compare with other targets.
GST_OMX_CONFIG_DIR=$HOME/gst/master/gst-omx/config/bellagio/ \
gst-launch-1.0 filesrc location=mpthreetest.mp3 ! id3demux ! \
mpegaudioparse ! omxmp3dec ! audioconvert ! pulsesink
Didn't add 'local' in core-name path compared to other components
in that same gstomx.conf file because OMX.st.audio_decoder.mp3.mad
comes with the Ubuntu package 'libomxil-bellagio0-components-mad'.
All other components listed in this gstomx.conf for Bellagio, are
not provided by any Ubuntu packages. It could explain the 'local',
i.e. requiring to build them from source.
dpkg -L libomxil-bellagio0
/usr/lib/libomxil-bellagio.so.0
https://bugzilla.gnome.org/show_bug.cgi?id=781786
Signed-off-by: Gurkirpal Singh <gurkirpal204@gmail.com>
Signed-off-by: Julien Isorce <jisorce@oblong.com>
2017-05-16 14:39:04 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* configure.ac:
Remove plugin specific static build option
Static and dynamic plugins now have the same interface. The standard
--enable-static/--enable-shared toggle are sufficient.
2017-05-10 12:10:10 +0900 Sejun Park <sejun79.park@samsung.com>
* omx/gstomxvideodec.c:
omxvideodec: Removed unreachable code
https://bugzilla.gnome.org/show_bug.cgi?id=782416
2017-05-09 16:26:44 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/meson.build:
meson: add dep on GModule
libgstomx uses the GModule API and so needs it in its dependencies list.
https://bugzilla.gnome.org/show_bug.cgi?id=782387
2017-05-09 13:27:28 +0000 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: fix config.h generation
"No such input file config.h.meson", but it's not needed anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=782382
2017-05-04 18:59:33 +0300 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* meson.build:
Back to development
=== release 1.12.0 ===
2017-05-04 15:48:56 +0300 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.12.0
=== release 1.11.91 ===
2017-04-27 17:53:50 +0300 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.11.91
2017-04-17 17:02:48 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* omx/gstomxvideoenc.c:
videoenc: use GST_ROUND_UP_N() macro
Makes the code much easier to read and understand.
https://bugzilla.gnome.org/show_bug.cgi?id=781409
2017-04-24 20:30:21 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From 60aeef6 to 48a5d85
2017-04-10 23:51:00 +0100 Tim-Philipp Müller <tim@centricular.com>
* autogen.sh:
* common:
Automatic update of common submodule
From 39ac2f5 to 60aeef6
=== release 1.11.90 ===
2017-04-07 16:36:45 +0300 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* meson.build:
Release 1.11.90
2017-04-07 14:27:23 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix compiler warning
gstomxvideoenc.c: In function ‘gst_omx_video_enc_fill_buffer’:
CC libgstomx_la-gstomxaacdec.lo
gstomxvideoenc.c:1316:27: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 8 has type ‘OMX_U32 {aka long unsigned int}’ [-Wformat=]
GST_LOG_OBJECT (self, "Matched strides - direct copy %u bytes",
^
outbuf->omx_buf->nFilledLen);
~~~~~~~~~~~~~~~~~~
2017-03-22 17:18:09 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
* meson.build:
meson: fix logic to set HAVE_THEORA
https://bugzilla.gnome.org/show_bug.cgi?id=780392
2017-03-14 03:02:06 +1100 Jan Schmidt <thaytan@noraisin.net>
* omx/gstomxvideoenc.c:
omxvideoenc: Add an unimplemented mapping for RGBA formats
Add some pixel formats mappings for 2 RGBA formats. Not yet
implemented in the buffer input code though, so no effect for now.
2017-03-14 03:00:49 +1100 Jan Schmidt <thaytan@noraisin.net>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideoenc.c:
omxvideoenc: Add GST_OMX_HACK_HEIGHT_MULTIPLE_16 for Rpi
The Raspberry Pi encoder produces corrupt output unless
the input height is a multiple of 16. Add a hack that adds
zero padding when needed.
2017-03-14 02:42:15 +1100 Jan Schmidt <thaytan@noraisin.net>
* omx/gstomxvideoenc.c:
omxvideoenc: Add a mapping for OMX_COLOR_FormatYUV420PackedSemiPlanar
The RaspberryPi
2017-03-14 02:40:24 +1100 Jan Schmidt <thaytan@noraisin.net>
* omx/gstomxvideoenc.c:
omxvideoenc: Filter out unimplemented formats
Don't announce pixel formats in the caps if they've not been
implemented.
2017-03-14 02:34:36 +1100 Jan Schmidt <thaytan@noraisin.net>
* omx/gstomxvideodec.c:
omxvideodec: demote ERROR message
There's no need to warn about failing to negotiate EGL output
- that can be perfectly normal.
2017-02-24 16:00:29 +0200 Sebastian Dröge <sebastian@centricular.com>
* meson.build:
meson: Update version
2017-02-24 15:38:17 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
Back to development
=== release 1.11.2 ===
2017-02-24 15:10:17 +0200 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
Release 1.11.2
2017-02-15 18:22:53 +0000 Tim-Philipp Müller <tim@centricular.com>
* Makefile.am:
meson: dist meson build files
Ship meson build files in tarballs, so people who use tarballs
in their builds can start playing with meson already.
2017-01-13 16:23:12 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* omx/gstomxaacenc.c:
omxaacenc: let encoder know about incoming rate/channels
https://bugzilla.gnome.org/show_bug.cgi?id=777223
2017-01-18 02:43:44 +1100 Matthew Waters <matthew@centricular.com>
* config/bellagio/meson.build:
* config/meson.build:
* config/rpi/meson.build:
* examples/egl/meson.build:
* examples/meson.build:
* hooks/pre-commit.hook:
* meson.build:
* meson_options.txt:
* omx/meson.build:
build: add meson build definition
Currently only been tested on the RPi within gst-build.
2017-01-18 15:21:35 +1100 Matthew Waters <matthew@centricular.com>
* examples/egl/testegl.c:
examples/testegl: update for libgstgl changes
2017-01-12 16:33:09 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
Back to development
=== release 1.11.1 ===
2017-01-12 16:26:55 +0200 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
Release 1.11.1
2017-01-10 15:29:08 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: set base class format instead of just source pad caps
2016-12-18 19:46:55 +0000 Graham Leggett <minfrin@sharp.fm>
* omx/gstomxaudiodec.c:
* omx/gstomxvideodec.c:
omx*dec: Flush before we stop the srcpad loop
Flushing could otherwise hang if output port queue of pending buffers was empty
https://bugzilla.gnome.org/show_bug.cgi?id=774654
2016-12-14 13:29:08 -0800 Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
* omx/gstomx.c:
Fix broken build due to syntax error
Problem was introduced by 8716c23e2b0553db2982eb84c437f493c974385e
2016-12-12 11:12:48 +0000 Graham Leggett <minfrin@sharp.fm>
* omx/gstomx.c:
Prevent early EOS by resetting eos flag once GST_OMX_ACQUIRE_BUFFER_EOS is triggered
https://bugzilla.gnome.org/show_bug.cgi?id=774600
2016-12-12 11:09:15 +0000 Graham Leggett <minfrin@sharp.fm>
* omx/gstomx.c:
Add clear debug logging on all the paths out of gst_omx_port_acquire_buffer()
https://bugzilla.gnome.org/show_bug.cgi?id=774600
2016-12-01 18:23:50 +0100 George Kiagiadakis <george.kiagiadakis@collabora.com>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
* omx/gstomx.h:
Add a signals-premature-eos hack for egl_render
egl_render seems to have a bug and signals EOS before it has finished
pushing out all data; this hack simply makes acquire_buffer() wait
a bit more before signalling EOS, in case egl_render decides to spit
out some more data.
https://bugzilla.gnome.org/show_bug.cgi?id=741856
2016-12-11 19:52:37 +0000 Graham Leggett <minfrin@sharp.fm>
* omx/gstomxvideo.c:
Add support for OMX_COLOR_FormatYUV420PackedSemiPlanar and OMX_COLOR_Format24bitBGR888
https://bugzilla.gnome.org/show_bug.cgi?id=775959
2016-12-03 08:20:46 +0100 Edward Hervey <bilboed@bilboed.com>
* common:
Automatic update of common submodule
From ac2f647 to 39ac2f5
2016-11-26 11:27:58 +0000 Tim-Philipp Müller <tim@centricular.com>
* .gitmodules:
common: use https protocol for common submodule
https://bugzilla.gnome.org/show_bug.cgi?id=775110
2016-11-25 23:56:06 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Fix compiler warning with latest clang
gstomx.c:1376:42: error: implicit conversion from enumeration type 'GstOMXAcquireBufferReturn' to different enumeration type 'OMX_ERRORTYPE'
(aka 'enum OMX_ERRORTYPE') [-Werror,-Wenum-conversion]
g_return_val_if_fail (!port->tunneled, GST_OMX_ACQUIRE_BUFFER_ERROR);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
https://bugzilla.gnome.org/show_bug.cgi?id=775112
2016-11-17 19:56:35 +1100 Matthew Waters <matthew@centricular.com>
* omx/gstomxvideodec.c:
videodecoder: remove use of EGLImage orientation
New code should use GstVideoTransformationMeta
(The defaults do the right thing here though).
=== release 1.11.0 ===
2016-11-01 18:53:25 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
Back to development
=== release 1.10.0 ===
2016-11-01 18:20:48 +0200 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
Release 1.10.0
=== release 1.9.90 ===
2016-09-30 13:04:51 +0300 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* common:
* configure.ac:
* gst-omx.doap:
Release 1.9.90
2016-09-14 11:33:13 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
configure: Depend on gstreamer 1.9.2.1
2016-09-12 14:09:46 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* omx/gstomx.c:
omx: Also search for gstomx.conf in the autoconf --sysconfdir
https://bugzilla.gnome.org/show_bug.cgi?id=770743
2016-09-10 20:52:10 +1000 Jan Schmidt <jan@centricular.com>
* autogen.sh:
* common:
Automatic update of common submodule
From b18d820 to f980fd9
2016-09-10 09:58:16 +1000 Jan Schmidt <jan@centricular.com>
* autogen.sh:
* common:
Automatic update of common submodule
From ac2f647 to b18d820
2016-09-01 12:36:09 +0300 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
Back to development
=== release 1.9.2 ===
2016-09-01 12:35:58 +0300 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* common:
* configure.ac:
* gst-omx.doap:
Release 1.9.2
2016-07-11 21:15:48 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From ac2f647 to f49c55e
2016-07-06 13:51:24 +0300 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
Back to development
=== release 1.9.1 ===
2016-07-06 13:48:45 +0300 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* common:
* configure.ac:
* gst-omx.doap:
Release 1.9.1
2016-06-29 16:37:43 +0900 Kazunori Kobayashi <kkobayas@igel.co.jp>
* omx/gstomxvideodec.c:
omxvideodec: Use GST_VIDEO_FRAME_PLANE_STRIDE() to get output buffer's stride
GST_VIDEO_FRAME_PLANE_STRIDE() should be used to get the actual buffer stride,
as reported in the buffers's GstVideoMeta, when copying data to that buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=768173
2016-06-21 11:48:40 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* common:
Automatic update of common submodule
From ac2f647 to f363b32
2016-06-21 11:43:13 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxaudioenc.c:
omxaudioenc: implement GstPreset interface
To allow user to use GstPreset to quickly save and load a set of
parameters.
https://bugzilla.gnome.org/show_bug.cgi?id=767907
2016-06-21 11:41:15 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideoenc.c:
omxvideoenc: implement GstPreset interface
To allow user to use GstPreset to quickly save and load a set of
parameters.
https://bugzilla.gnome.org/show_bug.cgi?id=767907
2016-06-17 12:06:48 +0300 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* omx/gstomx.h:
* omx/gstomxaudiodec.c:
* omx/gstomxaudioenc.c:
* omx/gstomxvideo.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: #define OMX_SKIP64BIT on the RPi as required by their API
Also add generic support for OMX_SKIP64BIT to gst-omx, in case other
implementations also #define that for whatever reason.
https://bugzilla.gnome.org/show_bug.cgi?id=766475
2016-06-17 10:59:45 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Implement ::drain() virtual method
https://bugzilla.gnome.org/show_bug.cgi?id=767641
2016-06-04 19:31:45 +0100 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
configure: remove AG_GST_PARSE_SUBSYSTEM_DISABLES
This would check which subsystems are disabled in core by grepping
gstconfig.h. Only problem is: gstconfig.h has moved into libdir now
so we've been checking a non-existent file for a while now. The
macro would just sets GST_DISABLE_* for use in configure.ac and
Makefile.am, but we don't use that anywhere so just get rid of it
(the one place where we use GST_DISABLE_GST_DEBUG is in a .c file
which gets the define from the gstconfig.h include).
https://bugzilla.gnome.org/show_bug.cgi?id=750056
2016-01-20 03:10:38 +0900 Gwang Yoon Hwang <yoon@igalia.com>
* examples/egl/testegl.c:
* omx/gstomxvideodec.c:
omxvideodec : Use gstglmemoryegl for the RPi
Modified to use gstglmemoryegl to avoid texture creation/copy operations
at the glupload.
[Matthew Waters]: gst-indent the sources and port testegl to GstGLMemoryEGL
https://bugzilla.gnome.org/show_bug.cgi?id=760918
2016-04-14 10:04:32 +0100 Julien Isorce <j.isorce@samsung.com>
* common:
Automatic update of common submodule
From 6f2d209 to ac2f647
2016-02-26 12:42:41 +0200 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From b64f03f to 6f2d209
2016-02-17 20:51:03 +1100 Matthew Waters <matthew@centricular.com>
* examples/egl/testegl.c:
examples: update egl example for gstgl API changes
https://bugzilla.gnome.org/show_bug.cgi?id=762053
https://bugzilla.gnome.org/show_bug.cgi?id=753917
2016-02-05 18:11:06 -0300 Thiago Santos <thiagoss@osg.samsung.com>
* autogen.sh:
* common:
Automatic update of common submodule
From 86e4663 to b64f03f
2015-12-21 00:43:49 +0100 Koop Mast <kwm@rainbow-runner.nl>
* configure.ac:
configure: Make -Bsymbolic check work with clang.
Update the -Bsymbolic check with the version glib has. This version
works with clang.
https://bugzilla.gnome.org/show_bug.cgi?id=759713
2015-12-07 09:11:32 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>
* autogen.sh:
* common:
Automatic update of common submodule
From b319909 to 86e4663
2015-11-18 13:00:28 +0000 Enrique Ocaña González <eocanha@igalia.com>
* omx/gstomx.c:
Remember the last_error after a failed set state call to avoid blocking the next get state call
gst_omx_video_dec_flush() blocks forever in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomxvideodec.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n2110
when the previous call to gst_omx_component_set_state() fails in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n827.
To mitigate that, I set "last_error" to true, so the code in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n862
exits early and doesn't block.
https://bugzilla.gnome.org/show_bug.cgi?id=758274
2015-11-18 12:59:59 +0000 Enrique Ocaña González <eocanha@igalia.com>
* omx/gstomxaudiodec.c:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
Properly handle drain requests while flushing
Without this commit the decoder streaming thread stops without ever attending
the drain request, leaving the decoder input thread waiting forever.
https://bugzilla.gnome.org/show_bug.cgi?id=758274
2015-11-10 10:42:35 +0100 Nicolas Huet <nicolas.huet@parrot.com>
* omx/gstomx.c:
omx: fix hacks leak on class init
2015-10-21 14:37:13 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From b99800a to b319909
2015-10-21 14:28:41 +0300 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From 9aed1d7 to b99800a
2015-09-01 16:08:11 -0300 Thiago Santos <thiagoss@osg.samsung.com>
* omx/gstomxaacdec.c:
omxaacdec: Do not accept unknown layouts
It was defaulting to RAW when an unknown layout was received but
the caps template would actually forbid that on the caps query
or accept-caps anyway.
2015-09-01 08:59:54 -0300 Thiago Santos <thiagoss@osg.samsung.com>
* omx/gstomxaudiodec.c:
omxaudiodec: use default pad accept-caps handling
Instead of the audiodecoder one. The OMX audioo decoders have their
valid input in the template pad, so just check against that to
avoid doing a query downstream.
2015-08-28 12:57:33 -0300 Thiago Santos <thiagoss@osg.samsung.com>
* omx/gstomxvideodec.c:
omxvideodec: use default pad accept-caps handling
Instead of the videodecoder one. The OMX video decoders have their
valid input in the template pad, so just check against that to
avoid doing a query downstream.
2015-08-22 15:54:55 +0000 Graham Leggett <minfrin@sharp.fm>
* omx/gstomxvideoenc.c:
omxvideoenc: Add keyframe support for the Rpi, using OMX_IndexConfigBrcmVideoRequestIFrame
https://bugzilla.gnome.org/show_bug.cgi?id=753085
2015-08-20 17:20:50 +0900 Vineeth TM <vineeth.tm@samsung.com>
* examples/egl/testegl.c:
gst-omx: Fix memory leaks when context parse fails
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753865
2015-08-16 14:53:42 +0200 Philippe Normand <philn@igalia.com>
* omx/gstomxh264dec.c:
omxh264dec: implement is_format_change
The omxvideodecoder class only checks some of the caps parameters but if
other fields change such as h264 profile and/or level it wouldn't trigger a
reconfiguration.
https://bugzilla.gnome.org/show_bug.cgi?id=752376
2015-07-03 00:26:48 +0200 Aurélien Zanelli <aurelien.zanelli@darkosphere.fr>
* omx/gstomxvideodec.c:
omxvideodec: unref allocator after getting it from allocation query
Otherwise a reference will be leaked for each allocator. It only happens
when target platform is Raspberry Pi and when we have GL support.
https://bugzilla.gnome.org/show_bug.cgi?id=751867
2015-07-03 21:59:54 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From f74b2df to 9aed1d7
2015-06-16 17:50:14 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>
* common:
Automatic update of common submodule
From 6015d26 to f74b2df
2015-06-09 11:30:49 +0200 Edward Hervey <bilboed@bilboed.com>
* common:
Automatic update of common submodule
From d9a3353 to 6015d26
2015-06-08 23:08:28 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From d37af32 to d9a3353
2015-06-07 23:07:22 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 21ba2e5 to d37af32
2015-06-07 17:32:25 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From c408583 to 21ba2e5
2015-06-07 17:16:43 +0200 Stefan Sauer <ensonic@users.sf.net>
* autogen.sh:
* common:
Automatic update of common submodule
From c8fb372 to c408583
2015-05-19 18:21:40 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
* omx/gstomxaudiodec.h:
omxaudiodec: Add an output adapter for chunking the output into codec frames
Otherwise the base class will be confused.
See https://bugzilla.gnome.org/show_bug.cgi?id=685730
2015-04-26 18:24:13 +0100 Tim-Philipp Müller <tim@centricular.com>
* Android.mk:
* omx/Makefile.am:
Remove obsolete Android build cruft
This is not needed any longer.
2015-04-22 10:40:22 +0200 Sebastian Dröge <sebastian@centricular.com>
* INSTALL:
Remove INSTALL file
autotools automatically generate this, and when using different versions
for autogen.sh there will always be changes to a file tracked by git.
2015-04-08 15:57:59 +0100 Tim-Philipp Müller <tim@centricular.com>
* .gitignore:
* Makefile.am:
* configure.ac:
* m4/Makefile.am:
Add m4 directory so aclocal doesn't complain in autogen.sh
Might come in handy, and these warnings seem to be
fatal in some environments.
You may need to git clean -x -d -f your tree before
git pulling/merging.
2015-04-07 22:25:57 +0100 Tim-Philipp Müller <tim@centricular.com>
* INSTALL:
* autogen.sh:
Update autogen.sh to latest version
2015-04-03 18:58:17 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From bc76a8b to c8fb372
2015-03-06 12:12:49 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaacdec.c:
omxaudiodec: add comment explaining duplicate code path
2015-03-06 12:09:06 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaacdec.c:
Revert "omxaudiodec: remove duplicate code path"
This reverts commit a8d26ff27a8b43f589424a59294f9057641b2a46.
2015-03-06 12:03:56 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomx.c:
omx: handle both errors in the two steps of update_port_definition
Also consider potential errors in the _get_parameter() in the return of the
update_port_definition function.
CID #1287052
2015-03-06 10:57:53 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaudioenc.c:
omxaudioenc: impossible if statement
ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible
for it to be anything else at the if check. Remove the if check.
CID #1287053
2015-03-06 10:54:43 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaudiodec.c:
omxaudiodec: impossible if statement
ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible
for it to be anything else at the if check. Remove it.
CID #1287054
2015-03-06 10:50:30 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaacdec.c:
omxaudiodec: remove duplicate code path
2014-12-19 11:19:55 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
omx: call handle_messages() only once in acquire_buffer() to avoid potential deadlock
There is one rare case where calling handle_messages() more than once can cause a deadlock
in the video decoder element:
- sink pad thread starts the src pad task (gst_omx_video_dec_loop())
- _video_dec_loop() calls gst_omx_port_acquire_buffer() on dec_out_port
- blocks in gst_omx_component_wait_message() releasing comp->lock and comp->messages_lock
(initially, there are no buffers configured on that port, so it waits for OMX_EventPortSettingsChanged)
- the sink pad thread pushes a buffer to the decoder with gst_omx_port_release_buffer()
- _release_buffer() grabs comp->lock and sends the buffer to OMX, which consumes it immediately
- EmptyBufferDone gets called at this point, which signals _wait_message() to unblock
- the message from EmptyBufferDone is processed in gst_omx_component_handle_messages()
called from gst_omx_port_release_buffer()
- gst_omx_port_release_buffer releases comp->lock
- the src pad thread now gets to run, grabbing comp->lock while it exits from _wait_message()
- _acquire_buffer() calls the _handle_messages() on the next line after _wait_message(),
which does nothing (no pending messages)
- then it goes to "retry:" and calls _handle_messages() again, which also does nothing
(still no pending messages)
- scheduler switches to a videocore thread that calls EventHandler, informing us about the
OMX_EventPortSettingsChanged event that just arrived
- EventHandler graps comp->messages_lock, but not comp->lock, so it can run in parallel at
this point just fine.
- scheduler switches back to the src pad thread (which is in the middle of _acquire_buffer())
- the next _handle_messages() which is right before if (g_queue_is_empty (&port->pending_buffers))
processes the OMX_EventPortSettingsChanged
- the buffer queue is still empty, so that thread blocks again in _wait_message()
- the sink pad thread tries to acquire the next input port buffer
- _acquire_buffer() also blocks this thread in:
if (comp->pending_reconfigure_outports) { ... _wait_message() ... }
- DEADLOCK. gstreamer is waiting for omx to do something, omx waits for gstreamer to do something.
By removing those extra _handle_messages() calls, we can ensure that all the checks of
_acquire_buffer() will re-run. In the above case, after the scheduler switches back to
the middle of _acquire_buffer(), the code will enter _wait_message(), which will see that
there are pending messages and will return immediately, going back to "retry:" and
re-doing all the checks properly.
https://bugzilla.gnome.org/show_bug.cgi?id=741854
2015-02-26 09:27:44 +0900 Wonchul Lee <chul0812@gmail.com>
* omx/gstomx.c:
omx: cleanup code a bit to remove else statement
https://bugzilla.gnome.org/show_bug.cgi?id=745191
2015-01-12 16:13:35 +0100 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From f2c6b95 to bc76a8b
2014-12-18 10:56:15 +0100 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From ef1ffdc to f2c6b95
2014-11-27 17:12:42 +0100 Edward Hervey <bilboed@bilboed.com>
* common:
Automatic update of common submodule
From 7bb2bce to ef1ffdc
2014-11-13 09:55:02 +0900 Jun Ji <jun.ji@lge.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxamrdec.c:
* omx/gstomxamrdec.h:
omx: Add omxamrdec
https://bugzilla.gnome.org/show_bug.cgi?id=739333
2014-10-27 18:00:50 +0100 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From 84d06cd to 7bb2bce
2014-10-21 13:03:44 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From a8c8939 to 84d06cd
2014-10-21 13:00:10 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 1f5d3c3 to a8c8939
2014-09-30 10:47:20 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Clean up code a bit to get rid of useless NULL checks
2014-09-30 10:50:07 +0900 junji <jun.ji@lge.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Unmap input buffers after usage
https://bugzilla.gnome.org/show_bug.cgi?id=736314
2014-08-31 20:30:13 +0000 Michal Lazo <michal.lazo@mdragon.org>
* omx/gstomxvideoenc.c:
omxvideoenc: Setup aspect ratio on RPi
Needs firmware from yesterday or newer to work with all possible
aspect ratios. Before that it only supported a fixed list.
https://bugzilla.gnome.org/show_bug.cgi?id=732533
2014-08-28 10:44:31 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE
2014-08-28 10:43:22 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Use the base class' open/close vfuncs instead of calling them ourselves
2014-08-26 22:13:53 -0500 Peng Liu <pengliu.mail@gmail.com>
* config/rpi/gstomx.conf:
* omx/gstomxvideoenc.c:
omxvideoenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE
Fix a video encoder stall problem on RPi when changing the aspect ratio.
https://bugzilla.gnome.org/show_bug.cgi?id=732533
2014-08-14 17:36:11 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
* omx/gstomxaudiodec.h:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omx: Let base classes handle EOS
https://bugzilla.gnome.org//show_bug.cgi?id=734774
2014-08-14 17:33:07 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Fix flushing logic and make it more similar to the video decoder
=== release 1.2.0 ===
2014-07-23 11:28:12 +0200 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* omx/Makefile.am:
Release 1.2.0
2014-07-22 09:23:00 +0200 Sebastian Dröge <sebastian@centricular.com>
* config/bellagio/gstomx.conf:
* config/rpi/gstomx.conf:
config: Update ranks to PRIMARY+1 to have higher preference than avdec_*
See https://bugzilla.gnome.org/show_bug.cgi?id=732161
2014-07-20 17:46:30 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiosink.c:
omxaudiosink: Set port to not flushing in prepare() and keep it at flushing in unprepare()
https://bugzilla.gnome.org/show_bug.cgi?id=733168
2014-07-13 22:15:18 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaacdec.c:
* omx/gstomxaudiodec.c:
* omx/gstomxaudiodec.h:
* omx/gstomxmp3dec.c:
omxaudiodec: Implement setting of fallback channel positions
2014-07-13 18:22:39 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxaacdec.c:
* omx/gstomxaacdec.h:
* omx/gstomxmp3dec.c:
omx: Add AAC audio decoder
2014-07-02 09:22:28 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Get PCM parameters from the out port, not the in port
2014-05-15 13:24:39 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Implement hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
2014-05-10 23:12:54 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxaudiodec.c:
* omx/gstomxaudiodec.h:
* omx/gstomxmp3dec.c:
* omx/gstomxmp3dec.h:
omx: Add audio decoder base class and a subclass for MP3
2014-07-01 09:38:01 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* omx/Makefile.am:
omx: Link to gmodule-2.0-no-export for being able to use the g_module_*() API
https://bugzilla.gnome.org/show_bug.cgi?id=732518
2014-06-30 15:00:54 +0200 Sebastian Dröge <sebastian@centricular.com>
* examples/egl/testegl.c:
examples: #define GST_USE_UNSTABLE_API for libgstgl
2014-06-29 19:10:19 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: Properly accumulate headers and push before the next frame
Fixes output of encoding on RPi, where each header buffer (SPS and PPS)
is in a separate OMX buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=726669
2014-06-29 19:04:54 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Implement flush() instead of the deprecated reset()
2014-06-25 17:14:18 +0200 Sebastian Dröge <sebastian@centricular.com>
* config/rpi/gstomx.conf:
rpi: It's 44100Hz, not 41400Hz
2014-06-25 11:12:51 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* configure.ac:
configure.ac: require gstgl >= 1.3.3
2014-04-25 13:25:05 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* Makefile.am:
* configure.ac:
example: enable testegl
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-06-25 10:19:54 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/testegl.c:
testegl: do matrix mutlplication in the shader
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-06-25 09:36:38 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/testegl.c:
testegl: add a comment for the parse command
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-04-25 17:32:16 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/Makefile.am:
* examples/egl/cube_texture_and_coords.h:
* examples/egl/testegl.c:
testegl: convert code from GLESv1 to GLESv2
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-04-25 13:21:59 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/Makefile.am:
* examples/egl/testegl.c:
testegl: port to gstgl API
- append a glfilter just before fakesink
So that we get gltexture or eglimages
- propagate our EGLDisplay to the pipeline
see GST_QUERY_CONTEXT
- share our EGLContext with the iternal gl context
of the pipeline, see GST_QUERY_ALLOCATION
- use GstVideoGLTextureUploadMeta to upload
the incoming gltexture or eglimage to our gl texture
TODO: convert from GLESv1 to GLESv2
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-06-24 14:52:58 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxbufferpool.c:
* omx/gstomxbufferpool.h:
* omx/gstomxvideodec.c:
omxbufferpool: Copy buffers if the stride does not match and we can't use video meta
https://bugzilla.gnome.org/show_bug.cgi?id=731672
2014-06-24 14:52:43 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* omx/gstomx.h:
* omx/gstomxvp8dec.h:
omx: Only include OMX_VideoExt.h conditionally
It does not exist on the RPi for example.
2014-06-24 13:59:44 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
configure.ac: Require GStreamer core/base >= 1.2.2
Needed at least for gst_video_decoder_release_frame().
2014-06-24 13:02:13 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxbufferpool.c:
omxbufferpool: Fix format string compiler warning
2014-06-22 21:11:45 +0000 Michal Lazo <xlazom00@gmail.com>
* omx/gstomxbufferpool.c:
omxbufferpool: Initialize debug category
2014-06-24 12:42:22 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxbufferpool.c:
omxbufferpool: Properly convert OMX alignment to GStreamer alignment
GStreamer uses a bitmask for the alignment while OMX uses the
alignment itself. Let's convert.
https://bugzilla.gnome.org/show_bug.cgi?id=710564
2014-06-24 11:11:28 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxh264enc.c:
omxh264enc: Don't let baseclass finish frames for SPS/PPS buffers
Otherwise we a) send them twice, and b) finish a frame for something
that does not even include a frame.
https://bugzilla.gnome.org/show_bug.cgi?id=726669
2014-06-24 10:22:37 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideo.h:
omxvideo: Include the separate headers too for compatibility with 1.0.x
2014-03-24 16:09:40 +0800 Zhao, Halley <halley.zhao@intel.com>
* configure.ac:
* omx/gstomxvp8dec.h:
omxvp8dec: use VP8 definition from OMX_VideoExt.h
https://bugzilla.gnome.org/show_bug.cgi?id=726957
2014-03-24 15:33:26 +0800 Zhao, Halley <halley.zhao@intel.com>
* configure.ac:
configure: add --with-omx-header-path option for external omx headers
https://bugzilla.gnome.org/show_bug.cgi?id=726957
2014-06-18 23:04:33 +0200 Aurélien Zanelli <aurelien.zanelli@darkosphere.fr>
* omx/gstomxvideodec.c:
omxvideodec: fix a query leak
Also add a debug message if query fails.
https://bugzilla.gnome.org/show_bug.cgi?id=731898
2014-05-30 15:29:15 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideodec.c:
omxvideodec: release frames with old PTS to avoid memory issue
Interlaced stream could make the decoder use two input frames to produce
one output frame causing the gstvideodecoder frame list to grow.
Assuming the video decoder output frame in display order rather than in
decoding order, this commit add a way to release frames with PTS less
than current output frame.
https://bugzilla.gnome.org/show_bug.cgi?id=730995
2013-06-27 21:59:29 +0900 Kazunori Kobayashi <kkobayas@igel.co.jp>
* omx/gstomx.c:
omx: Fix a missing g_free() in error path
This fixes a memory leak with g_strdup() when an error occurs.
https://bugzilla.gnome.org/show_bug.cgi?id=731141
2014-06-02 15:34:09 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideodec.c:
omxvideodec: add missing stream unlock in error path
2014-05-31 15:12:05 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Don't handle disabling/enabling ports exactly like flushing
Otherwise we might abort a flush operation in another thread when
enabling/disabling ports, leading to deadlocks sometimes.
https://bugzilla.gnome.org/show_bug.cgi?id=730989
2014-05-26 11:02:10 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Don't leak buffer pool config in error cases
CID 1216158
2014-05-21 10:53:43 +0200 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From 211fa5f to 1f5d3c3
2014-05-19 09:10:07 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Don't forget to unref codec state
CID 1214603
2014-05-19 09:08:33 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Make output buffer pointer always initialized
CID 1214605
2014-05-19 09:06:42 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Check return value of gst_buffer_map()
CID 1214599
2014-05-19 09:04:09 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Check return value of gst_omx_port_set_enabled() for errors
CID 1214589
2014-05-19 09:01:46 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Check return values of buffer pool config parsing functions
CID 1214588
2014-05-19 08:48:50 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Remove dead code, buf can never be NULL here as we just check for that the line above
CID 1214596
2014-05-19 08:47:36 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Fix comparisons in gst_omx_state_to_string() case to actually make sense
CID 1214593
2014-05-19 08:45:10 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Make sure to compare the error codes as unsigned integers so that comparisons >2**31 actually work
CID 1214592
2014-05-19 08:40:23 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Fix comparisons in gst_omx_command_to_string() default cause to actually work
CID 1214591
2014-05-15 13:22:56 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Implement hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
2014-05-15 13:21:07 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Implement hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
2014-05-15 10:58:34 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Add a hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
2014-05-12 12:33:32 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxaudiosink.c:
omxaudiosink: implement _delay only in the RaspberryPI
Make code implementation conditionally built for RaspberryPI because
OMX_IndexConfigAudioRenderingLatency seems to be a Broadcom extension.
On other targets the query position might not be accurate without
implementing _delay appropriatelly.
2014-05-12 08:56:15 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Correctly scale nTickCount by OMX_TICKS_PER_SECOND
2014-05-10 22:48:23 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Drain encoder on NULL buffer and don't drain on flushing
2014-05-10 22:47:56 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Set nTickCount based on the buffer's duration instead of something wrong
2014-05-10 22:47:21 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Set nTickCount to the whole duration of the buffer instead of a wrong calculation
2014-05-10 22:46:51 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiosink.c:
omxaudiosink: Fix format string compiler warnings
2014-04-04 14:11:58 +0200 Josep Torra <n770galaxy@gmail.com>
* config/rpi/gstomx.conf:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxanalogaudiosink.c:
* omx/gstomxanalogaudiosink.h:
* omx/gstomxaudiosink.c:
* omx/gstomxaudiosink.h:
* omx/gstomxhdmiaudiosink.c:
* omx/gstomxhdmiaudiosink.h:
omxaudiosink: Implements OpenMAX based audio sinks
Provides omxanalogaudiosink and omxhdmiaudiosink elements on
the Raspberry PI.
- omxanalogaudiosink is capable to render raw mono or stereo audio
through the jack output.
- omxhdmiaudiosink is capable to render raw audio up to 8 channels
and transmit ac3/dts(IEC 61937) through the HDMI output.
- sinks provide a clock derived from rendered samples
- sinks support the GstStreamVolume interface by implementing
the volume and mute properties.
https://bugzilla.gnome.org/show_bug.cgi?id=728962
2014-05-03 10:17:35 +0200 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From bcb1518 to 211fa5f
2014-04-29 15:16:16 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: can negotiate caps with memory:EGLImage feature when using EGLImage allocator
Previously when using gst EGLImage allocator the caps was
video/x-raw, format=RGBA instead of
video/x-raw(memory:EGLImage), format=RGBA
Kepp previous behavior in case negotiation fails with caps feature.
It means it will still have a chance to use EGLImage even if the
feature is not in the caps.
https://bugzilla.gnome.org/show_bug.cgi?id=729196
2014-04-23 09:57:48 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvp8dec.h:
omxvp8dec: fix typo in GST_TYPE_OMX_VP8_DEC define
https://bugzilla.gnome.org/show_bug.cgi?id=728774
2014-04-16 11:00:55 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideodec.c:
omxvideodec: don't unref caps before logging field from it
https://bugzilla.gnome.org/show_bug.cgi?id=728322
2014-04-15 17:30:13 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* Makefile.am:
* configure.ac:
example: disable testegl since libgstegl has been removed
As decided in bug #703343
Not compatible with the new libgstgl API.
A portage has been started, attachment 272800.
https://bugzilla.gnome.org/show_bug.cgi?id=703343
2014-04-15 17:11:08 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: use new libgstgl API since libgstegl has been removed
There is no point to retrieve a ref/unref type
instead of an EGLDisplay directly. It's like for EGLImage.
https://bugzilla.gnome.org/show_bug.cgi?id=703343
2014-04-15 17:06:38 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* configure.ac:
* examples/Makefile.am:
* omx/Makefile.am:
* omx/gstomxvideodec.c:
configure.ac: check for libgstgl since libgstegl has been removed
https://bugzilla.gnome.org/show_bug.cgi?id=703343
2014-04-09 18:52:16 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxbufferpool.c:
* omx/gstomxvideodec.c:
omxvideodec: add support of more color format
Add support for ABGR, ARGB, RGB16, BGR16, YUY2, UYVY, YVYU, GRAY8 and
NV16 color format.
2014-04-09 18:51:57 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideodec.c:
omxvideodec: simplify color format conversion in fill_buffer function
2014-04-09 18:51:41 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxbufferpool.c:
omxbufferpool: make video stride and offset calculation easier
It will be easier to support more color format.
2014-04-09 18:51:12 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
omx: add an helper to convert OMX color format to GStreamer color format
2014-03-10 17:43:50 +0100 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
* omx/gstomxvideodec.c:
omxvideodec: Implement pipeline draining to support adaptive scenarios
When draining due a format change also drain
the pipeline to reclaim back all buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=726107
2014-03-27 13:57:32 +0100 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: fix several memory leaks in the testegl example
Ensure to call to image_data_free in order to release GPU resources.
Also ensure to destroy EGLImage and GLTexture from proper
thread/context.
https://bugzilla.gnome.org/show_bug.cgi?id=726107
2014-03-25 17:16:31 +0000 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/testegl.c:
examples: keep a ref on the buffer instead of the memory
Like in eglglessink
https://bugzilla.gnome.org/show_bug.cgi?id=726107
2014-03-07 20:08:05 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: fixes race condition during seeks
Acording 6.1.3 Seek Event Sequence in the OpenMAX IL 1.1.2 spec
document in order to flush the component it needs to be in
paused state.
https://bugzilla.gnome.org/show_bug.cgi?id=726038
2014-01-29 18:31:26 +0000 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: use flush because reset is deprecated
https://bugzilla.gnome.org/show_bug.cgi?id=726038
2014-01-27 17:03:50 +0000 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: populate the most downstream output port on reset
Make seeking work when using egl_render component
https://bugzilla.gnome.org/show_bug.cgi?id=726038
2014-03-24 17:49:59 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxbufferpool.c:
omxbufferpool: return buffers to the pool instead of freeing them
We have to return the buffers back to the pool in when stopping to
not mess with the GstBufferPool accounting.
The OMX buffers will be freed when those won't be in charge of the
pool in the chained up call to 'stop'.
Fixes segfaults on finalize and pool not being properly deactivated.
https://bugzilla.gnome.org/show_bug.cgi?id=726337
2014-03-19 12:12:49 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: add missing unlock in the error path
Signed-off-by: Christian König <christian.koenig@amd.com>
https://bugzilla.gnome.org/show_bug.cgi?id=726958
2014-03-18 23:36:59 +0100 Michal Lazo <xlazom00@gmail.com>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
fix filemode
2014-03-17 09:57:11 +0000 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxbufferpool.c:
omxbufferpool: fix memory leak if used on output port
When using GstOMXBufferPool on an output port, it internally uses
a GPtrArray to manage the GstBuffers instead of the default queue
from the GstBufferPool base class.
In this case GstBufferPool::default_free_buffer is not called when
the pool is stopped. Because the queue is empty. So explicitely
call gst_omx_buffer_pool_free_buffer on each buffer contained in
the GPtrArray.
https://bugzilla.gnome.org/show_bug.cgi?id=726337
2014-03-16 17:32:05 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxh264enc.c:
omxh264enc: Fix compiler warnings
2014-03-16 17:19:08 +0100 Michal Lazo <xlazom00@gmail.com>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: IDR interval, SPS and PPS headers for rpi
https://bugzilla.gnome.org/show_bug.cgi?id=720031
2014-03-13 14:26:58 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideo.c:
omxvideo: fix debug category initialisation
https://bugzilla.gnome.org/show_bug.cgi?id=726024
2014-03-13 19:04:47 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxbufferpool.h:
omxbufferpool: add proper type definitions
https://bugzilla.gnome.org/show_bug.cgi?id=726325
2014-03-02 10:30:04 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomx.c:
omx: consolidate message waiting code
Add a wait_message helper function and remove all those duplicated code.
https://bugzilla.gnome.org/show_bug.cgi?id=725493
2014-03-12 12:48:12 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideo.c:
omx: Copy old copyright notice into the new file
2014-03-12 12:47:34 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Rename function from _4_ to _for_ for clarity
2014-03-03 16:15:24 +0100 Christian König <christian.koenig@amd.com>
* omx/Makefile.am:
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo: start sharing more code between video decoder and encoder
Identical functionality spread of two different components.
We can't use a common base class because of different inheritance,
but let's try to share the code anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=726024
2014-03-12 12:43:49 +0100 Sebastian Dröge <sebastian@centricular.com>
* examples/egl/Makefile.am:
examples: Only build RPi EGL example if RPi was chosen as target
2014-03-12 12:42:23 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxbufferpool.h:
omxbufferpool: Fix header include guard
2014-03-05 11:41:02 +0100 Christian König <christian.koenig@amd.com>
* omx/Makefile.am:
* omx/gstomxbufferpool.c:
* omx/gstomxbufferpool.h:
* omx/gstomxvideodec.c:
omxvideodec: separate the buffer pool from the decoder
https://bugzilla.gnome.org/show_bug.cgi?id=726025
2014-03-04 17:41:20 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: simplify tunnel functions
Specifying the component is error prone and unnecessary.
https://bugzilla.gnome.org/show_bug.cgi?id=726021
2014-03-07 17:12:24 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: fix memory leak in gst_omx_video_dec_allocate_output_buffers
https://bugzilla.gnome.org/show_bug.cgi?id=725907
2014-03-07 13:18:49 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: fix memory leak gst_omx_video_dec_negotiate
https://bugzilla.gnome.org/show_bug.cgi?id=725907
2014-03-05 18:54:05 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideoenc.c:
omxvideoenc: fix a memory leak in gst_omx_video_enc_getcaps
https://bugzilla.gnome.org/show_bug.cgi?id=725826
2014-03-05 17:43:33 +0100 Josep Torra <n770galaxy@gmail.com>
* Makefile.am:
Makefile.am: build examples
There's no reason to not build the examples now that are ported to 1.x.
2014-03-05 17:25:09 +0100 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: avoid a clashing name with the recently added GstEGLImagePool
Fixes build with current master.
2013-09-05 03:41:10 -0600 Christian König <christian.koenig@amd.com>
* omx/gstomxvideoenc.c:
omxvideoenc: simplify _find_nearest_frame
Just the same as we did with the decoder. Also give the
function a gst_omx_video_enc prefix to distinct it from
the decoder function.
https://bugzilla.gnome.org/show_bug.cgi?id=724236
2013-09-05 02:23:39 -0600 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: simplify _find_nearest_frame
No need to make it more complicated and error prone than
necessary. Also give the function a gst_omx_video_dec prefix
to distinct it from the encoder function.
https://bugzilla.gnome.org/show_bug.cgi?id=724236
2013-09-05 02:05:52 -0600 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: remove dead code
This code doesn't seems to be used for quite a while,
remove it before it starts to rot.
https://bugzilla.gnome.org/show_bug.cgi?id=724236
2014-03-01 22:28:24 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomx.c:
omx: fix two serious message handling bugs
Waiting for the next message if we already got one
is nonsense and can lead to lockups.
https://bugzilla.gnome.org/show_bug.cgi?id=725468
2014-03-01 18:49:41 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideoenc.c:
omxvideoenc: fix startup race condition
The reset function shouldn't start the src pad
loop if it wasn't started before.
Signed-off-by: Christian König <christian.koenig@amd.com>
2014-03-01 18:48:17 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: fix startup race condition
The reset function shouldn't start the src pad
loop if it wasn't started before.
Signed-off-by: Christian König <christian.koenig@amd.com>
2014-02-28 09:36:13 +0100 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From fe1672e to bcb1518
2014-02-26 22:15:00 +0100 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 1a07da9 to fe1672e
2014-01-30 10:45:18 +0100 Edward Hervey <bilboed@bilboed.com>
* common:
Automatic update of common submodule
From d48bed3 to 1a07da9
2014-01-25 17:44:14 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Don't handle FLUSHING and NOT_LINKED as errors
Also don't stop the task on NOT_LINKED. We're not a demuxer.
2013-12-22 22:35:31 +0000 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From dbedaa0 to d48bed3
2013-11-05 11:22:02 +0000 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From 865aa20 to dbedaa0
2013-09-28 13:32:37 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: simplify the thread synchronization code
Make everithing more simple and fix the races conditions remaining in
the previous approaches.
2013-09-25 19:17:17 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* config/rpi/gstomx.conf:
rpi: The WMV/VC1 decoder can only do WMV9 and VC1, no older versions
2013-09-24 18:34:42 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 6b03ba7 to 865aa20
2013-09-24 18:48:24 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: fix another race condition
Fix a race condition that caused randome deadlocks on EOS.
2013-09-20 17:19:53 +0200 Josep Torra <n770galaxy@gmail.com>
* config/rpi/gstomx.conf:
rpi: fix a copy paste error in the config file
2013-09-20 17:09:52 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: fix a race condition when seeking
Fixes a race condition that caused pipeline deadlock during seeks.
2013-09-20 10:38:12 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: display QoS statistics
2013-09-20 09:34:37 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: use dedicated thread for rendering the scene
Produces smother animation and prevents dropping frames due busy
mainloop.
2013-09-20 08:25:21 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: don't force an specific audio sink
Let playbin2 choose the audiosink available in the system.
2013-09-20 08:19:48 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/Makefile.am:
examples: drop remnants of initial appsink attempt
2013-09-20 16:18:18 +0200 Edward Hervey <edward@collabora.com>
* common:
Automatic update of common submodule
From b613661 to 6b03ba7
2013-09-19 18:45:36 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 74a6857 to b613661
2013-09-19 17:38:30 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 01a7a46 to 74a6857
2013-08-20 16:00:07 +0100 Tim-Philipp Müller <tim@centricular.net>
* omx/gstomx.c:
* omx/gstomxvideodec.c:
omx: don't use the 'z' modifier to print size_t
gcc will warn in some cases even if the size of the type
is exactly that of size_t on the platform.
https://bugzilla.gnome.org/show_bug.cgi?id=699008
2013-07-01 15:48:47 +0200 Roman Arutyunyan <arutyunyan.roman@gmail.com>
* omx/gstomxvideoenc.c:
gstomxvideoenc: Set bitrate in setcaps
Otherwise it gets lost whenever we configure new caps
https://bugzilla.gnome.org/show_bug.cgi?id=698049
2013-06-30 18:17:05 +0700 Ilya Smelykh <ilya@videoexpertsgroup.com>
* examples/egl/testegl.c:
examples: enable audio in testegl example
2013-06-12 09:38:22 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* configure.ac:
configure: Allow build without gstreamer-egl
2013-06-07 12:39:18 +0700 Ilya Smelykh <ilya@videoexpertsgroup.com>
* examples/egl/Makefile.am:
* examples/egl/testegl.c:
examples: testegl example port to 1.x
https://bugzilla.gnome.org/show_bug.cgi?id=701706
2013-06-05 15:17:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 098c0d7 to 01a7a46
2013-05-20 12:06:34 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Take lock on EOS to update the flow return value
Fixes "GThread-ERROR **: file gthread-posix.c: line 171
(g_mutex_free_posix_impl): error 'Device or resource busy' during
'pthread_mutex_destroy ((pthread_mutex_t *) mutex)'" in _finalize.
2013-05-15 10:54:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 5edcd85 to 098c0d7
2013-04-11 17:35:19 +0200 Josep Torra <n770galaxy@gmail.com>
* Makefile.am:
* configure.ac:
* examples/Makefile.am:
* examples/egl/Makefile.am:
* examples/egl/cube_texture_and_coords.h:
* examples/egl/testegl.c:
examples: add an example aplication based OpenGL ES + EGL
Application that shows how to integrate playbin with an OpenGL ES
scene through EGL. Renders a video on the surfaces of an animated cube.
The code is not ported to 1.x so it's not built by default.
2013-05-10 12:25:07 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: Redesign video size change reconfiguration code
Ensure stop the decoder before clossing the tunnel.
2013-05-06 16:25:27 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
Makefile.am: Add -I common/m4
This allows autoreconf to work correctly and automatic regeneration
of autotools files if something changed.
2013-05-06 19:03:59 +0530 jitendra <jvarshney20@gmail.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Add pads based on element type
This allows to later add sources and sink that only have a srcpad
or sinkpad.
https://bugzilla.gnome.org/show_bug.cgi?id=699754
2013-04-27 02:50:25 +0200 Carlos Rafael Giani <dv@pseudoterminal.org>
* omx/gstomx.c:
omx: fixed type error in printf call
%zu expects size_t
https://bugzilla.gnome.org/show_bug.cgi?id=699008
2013-04-08 17:26:16 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstomxvideodec.c:
Check for gstreamer-egl
And don't use if not available.
https://bugzilla.gnome.org/show_bug.cgi?id=697574
2013-04-23 09:53:18 +0100 Tim-Philipp Müller <tim@centricular.net>
* configure.ac:
configure: error out if no OMX target has been set explicitly with --with-omx-target=x
Avoids people building for e.g. the Raspberry Pi and then wondering
why things don't work as expected (since structs are packed differently
there).
2013-04-22 23:55:03 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 3cb3d3c to 5edcd85
2013-04-18 22:07:28 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxaudioenc.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: more printf format fixes
Fix printf formats again, so that gst-omx compiles warning-
free on the Raspberry Pi as well. Unfortunately OMX_UINT32
maybe be typedefed to uint32_t or unsigned long, which
doesn't work well with our debugging printf format strings,
so just use %u for those and cast to guint.
2013-04-18 16:40:06 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomx.c:
omx: fixes unused variable 'comp' when GStreamer is built without debug
2013-04-18 16:03:56 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: don't use 'self->dec_out_port' anymore and use just 'port'
Fixes some criticals.
2013-04-18 15:21:32 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: fixes 'port' may be used uninitialized in this function
2013-04-18 12:03:31 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: silence warnings building for RPI related to 'vcos_*'
2013-04-18 11:19:52 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: Use new type from libgstvideo
2013-04-16 14:50:49 +0530 jitendra <jvarshney20@gmail.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Disable output port before transition to idle state
https://bugzilla.gnome.org/show_bug.cgi?id=698109
2012-10-24 12:19:41 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
gst: Add better support for static plugins
2013-04-14 17:57:34 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From aed87ae to 3cb3d3c
2013-04-12 17:58:30 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
configure: add --disable-fatal-warnings for disabling -Werror
2013-04-09 21:02:09 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 04c7a1e to aed87ae
2013-04-08 17:02:32 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxaudioenc.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: fix printf formats in debug messages
OMX_U32 is typedefed to an unsigned long,
OMX_TICKS to a 64-bit integer.
2013-04-08 16:52:19 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: use the correct printf format in a debug message
2013-04-08 16:31:33 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: use the correct OMX_IndexParam value
Fixes playback is not smooth in the EGL path.
2013-04-05 13:45:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't use API that is not in master yet
It's not really needed here yet, will be needed in future versions
2013-02-25 11:55:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Add support for egl_render on RPi
2013-03-22 19:26:54 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
Back to development
2013-03-22 19:23:14 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
omx: fix compiler warnings when compiling with -DG_DISABLE_ASSERT
As we do for releases. Fixes 'variable may be used uninitialized'
warnings.
=== release 1.0.0 ===
2013-03-22 17:16:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* AUTHORS:
* ChangeLog:
* Makefile.am:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
Release 1.0.0
2013-03-19 16:40:09 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomxtheoradec.h:
* omx/gstomxvp8dec.h:
omx: fix typo in copyright headers
2013-03-19 13:46:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Fix commit that added the VC1 decoder
2013-03-19 13:27:35 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomxh263dec.c:
* omx/gstomxh264dec.c:
* omx/gstomxmjpegdec.c:
* omx/gstomxmpeg2videodec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxtheoradec.c:
* omx/gstomxvideodec.c:
* omx/gstomxvp8dec.c:
* omx/gstomxwmvdec.c:
omx: Add more constraints to the default sink template caps
2013-03-19 13:10:39 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add VC1/WMV3 decoder
WMV2 and WMV1 (aka WMV 1-8) are not supported by RPi.
2013-03-19 12:59:20 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add MJPEG decoder
2013-03-19 12:56:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add VP8 decoder
2013-03-19 12:55:09 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Set ENDOFFRAME flag for the end of frames
2013-03-19 12:28:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add Theora decoder to the config
2013-03-19 09:36:18 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxtheoradec.c:
* omx/gstomxtheoradec.h:
omx: Add Theora decoder
2013-03-18 16:43:24 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Remove additional comma
2013-03-18 16:34:21 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxmpeg2dec.h:
* omx/gstomxmpeg2videodec.c:
* omx/gstomxmpeg2videodec.h:
omx: Rename MPEG2 decoder for consistency everywhere
2013-03-18 16:30:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxmjpegdec.c:
* omx/gstomxmjpegdec.h:
omx: Add MJPEG decoder support
2013-03-18 16:06:54 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxvp8dec.c:
* omx/gstomxvp8dec.h:
omx: Add VP8 decoder support
2013-03-18 15:44:23 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add h263 decoder and rename MPEG2 decoder for consistency
2013-03-16 13:20:27 +0000 Tim-Philipp Müller <tim@centricular.net>
* omx/gstomxmpeg2dec.c:
omxmpeg2dec: mpeg-2 decoder should be able to handle mpeg-1 too
https://bugzilla.gnome.org/show_bug.cgi?id=695879
2013-03-16 10:13:06 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomx.c:
omx: minor stylistic change for consistency with other similar code
2013-03-16 10:00:24 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Clarify that loop task is also paused in EOS
2013-03-16 09:59:01 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideoenc.c:
omxvideoenec: Don't forget propagate flow return value upstream
2013-03-15 13:16:39 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
omx: improve debug logging some more
2013-03-15 14:09:45 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure that the first frame we pass to OpenMAX is a sync frame
2013-03-15 11:46:34 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Stop output port task after draining
2013-03-15 10:58:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset EOS flag in more places
2013-03-15 10:38:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Deallocate output buffers with the right function
2013-03-15 01:06:05 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: log commands as strings
Makes logs easier to read.
2013-03-15 00:47:47 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: log states as strings
2013-03-15 00:28:02 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: log component name in debug messages
Useful when we have more different components
active at the same time.
2013-03-15 09:51:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't interpolate timestamps
We will get exactly one frame per input buffer and assigning
timestamps between frames if more than one OMX buffer is required
per frame easily confuses timestamp tracking in OMX.
2013-03-15 09:32:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Give the codec_data the timestamp of the first frame and no duration
2013-03-14 17:31:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
omx: The MPEG4 encoder is not available on RPi and probably never will
2013-03-14 17:26:30 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset some more buffer fields as required
2013-03-14 17:01:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
omx: The hack to disable usage of EOS buffers is not necessary anymore on RPi
2013-03-14 17:00:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset the flags for output ports when releasing a buffer, not for input ports
2013-03-14 15:03:02 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
omx: Only unref caps after usage of its fields
2013-03-14 14:51:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Simplify bufferpool implementation
2013-03-13 13:23:35 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve min/max buffer counts handling
2013-03-14 12:49:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Handle the OMX_EventBufferFlag to detect EOS too
2013-03-13 10:29:23 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Mark OpenMAX buffers as EGLImage if they contain one
Needs special handling in some places, e.g. because nFilledLen
will always be 0.
2013-03-13 10:21:49 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Properly check the nVersion field
2013-03-13 09:34:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: RPi returns garbage for OMX_IndexParamVideoBitrate, work around that
2013-03-12 20:02:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure to always get the right buffer
2013-03-12 19:35:39 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure the buffer is released to the pool if it's not the one we wanted
2013-03-12 19:17:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Drop too late frames instead of finishing them
2013-03-12 19:16:46 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omx: Release buffers to the correct port
2013-03-13 09:37:02 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always load the OpenMAX IL cores with G_MODULE_BIND_LOCAL
2013-03-12 18:20:22 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Lazy-load symbols of libbcm_host.so
It exports eglIntOpenMAXILDoneMarker(), which is also
exported by libopenmaxil.so... but we need the version
from libopenmaxil.so as the other one is just a stub.
2013-03-11 13:59:15 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaacenc.c:
* omx/gstomxh263enc.c:
* omx/gstomxmpeg4videoenc.c:
omx: Don't set profile/level in other encoders if downstream caps don't specify any
2013-03-11 13:49:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: If caps specify no profile/level use the component's defaults
2013-03-11 13:45:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Always allocate output buffers from the loop function
2013-03-11 13:12:57 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: The h264 encoders are supposed to output byte-stream/au
2013-03-11 11:47:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Wait until the Executing state is reached before passing buffers to the component
2013-03-11 10:39:25 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't provide buffers to downstream
This only works reliable if we have a way to tell downstream to
release all our buffers for reconfiguration.
2013-03-11 10:29:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Disable output port when setting a new format
2013-03-11 10:29:30 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Disable output port when setting a new format
2013-03-11 10:22:07 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Disable output port when setting a new format
Based on a patch by Josep Torra <n770galaxy@gmail.com>
2013-03-11 10:04:10 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Catch errors when releasing buffers to a port and handle them
2013-03-10 12:09:23 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Use the correct video codec state when filling an input buffer
2013-03-10 12:05:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Store correct input state
2013-03-10 11:27:34 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Allocate output buffers as early as possible
2013-03-10 11:01:57 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Log unknown events
2013-03-09 14:14:40 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix deadlock in encoders and add explainatory comments.
2013-03-09 13:27:08 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: fix printf format identifier
2013-03-09 13:07:59 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omx: Minor changes on debuging info
2013-03-09 13:00:33 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: avoid a deadlock
2013-03-08 15:56:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't forget to populate output port
2013-03-08 15:11:27 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Flush and stop srcpad when configuring new caps
2013-03-07 17:40:21 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
Revert "omx: use no-component-reconfigure hack on the Raspberry PI"
This reverts commit e123b2089f69a413241f30a2428ea6edd8f231e7.
It's not required anymore after the fix from the last commit.
2013-03-07 17:38:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Only negotiate a color format with downstream on the initial caps
2013-03-07 17:29:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure the output port is disabled while we allocate buffers
2013-03-07 17:27:05 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Also wait for disabled output ports to be reconfigured
2013-03-07 14:10:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Add buffer pool for sharing OpenMAX memory with downstream
2013-03-07 11:11:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Add timeout to the flush operation and move buffer populating to a separate function
2013-03-06 17:33:23 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
* omx/gstomx.h:
omx: Remove min buffer count hack for RPi again
It's not necessary anymore
2013-03-06 17:05:51 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Do number of buffers configuration explicitely
2013-03-07 11:24:54 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: fixes reconfiguration
Avoid having fixed fields from previous caps on reconfiguration.
2013-03-07 11:02:39 +0100 Josep Torra <n770galaxy@gmail.com>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
omx: use no-component-reconfigure hack on the Raspberry PI
2013-03-07 00:03:28 +0000 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 2de221c to 04c7a1e
2013-03-01 15:32:47 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideoenc.h:
omxvideoenc: drop unused data member
2013-03-01 12:23:54 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
omxvideoenc: And set it actually on the right port
2013-03-01 12:18:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
omxvideoenc: Set the coding type in the subclasses to the specific codec
2013-03-01 11:49:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: gst_omx_port_update_port_definition() returns a OMX_ERRORTYPE, not a gboolean
2013-03-01 11:44:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo{dec,enc}: Don't use the input state if it wasn't set yet
2013-03-01 11:25:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Only enable the output port after we know the output format
2013-03-01 11:24:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Only enable the output port after we know the output format
2013-02-28 17:02:31 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Only enable the output port after we know the output format
2013-03-01 11:18:18 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Handle errors more gracefully
2013-02-28 15:48:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxh263dec.c:
* omx/gstomxh264dec.c:
* omx/gstomxmpeg2dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
* omx/gstomxwmvdec.c:
omx: Return the OMX_ERRORTYPE from gst_omx_port_update_port_definition
2013-02-28 15:37:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Return port definition update errors
2013-02-28 13:57:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add hack for RPi for the minimum number of buffers required for a port
The value in the port definition is invalid and the initial actual
buffer count should be used.
2013-02-28 13:26:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always tell the component about the right number of buffers that we're going to allocate
2013-02-28 13:07:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Invert assertion to let it express what was intended
2013-02-28 11:19:07 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Add API for allocating a specific number of buffers and using EGLImages or buffers allocated elsewhere
2013-02-27 16:55:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Refactor code flow a bit if output port settings have changed
2013-02-27 15:49:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Clean up port settings change handling
2013-02-27 11:30:14 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: initialize param structure before using it
2013-02-27 10:21:39 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideoenc.c:
omxvideoenc: prevent a NULL pointer access
2013-02-26 17:25:49 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: prevent a NULL pointer access
2013-02-25 13:11:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Fix deadlock during reconfiguration
2013-02-25 12:38:27 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Auto-detect the port indizes if possible
2013-02-25 11:42:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Refactor querying of component supported caps into its own function
2013-02-25 10:41:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Refactor waiting for buffers to be released by the component to a separate function
2013-01-11 17:44:13 +0000 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add methods to set up and close a tunnel between components
2013-02-25 09:15:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaacenc.c:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Rename component variable
2013-02-25 09:15:46 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Rename component variable
2013-02-25 09:12:22 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Rename component variable
2013-02-22 16:27:33 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideoenc.c:
omxvideoenc: remove duplicated line
2013-02-22 10:42:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
Retry loading libbcm_host.so without an absolute path if that failed
2013-02-21 20:32:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/bellagio/Makefile.am:
Add missing file from last commit
2013-02-21 11:01:28 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/Makefile.am:
* config/bellagio/gstomx.conf:
* configure.ac:
* omx/Makefile.am:
Add OpenMAX IL target for Bellagio
Not tested since a very long time though.
2013-02-21 10:59:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
Allow using external OpenMAX IL headers
2013-02-21 10:14:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* .gitignore:
Update .gitignore
2013-02-21 10:13:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/Makefile.am:
* config/rpi/Makefile.am:
* config/rpi/gstomx.conf:
* configure.ac:
Install the RPI config when the RPI target is selected
2013-02-21 10:08:07 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
Set default hacks for the RPI target and always initialize bcm_host
2013-02-21 10:05:37 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
Add configure parameter for setting the OpenMAX IL target
2013-02-12 11:55:39 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add FIXME for the future
2013-02-12 11:49:21 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omx: Some minor refactoring and cleanup
2013-02-12 11:45:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Don't access the port's buffers array if it wasn't allocated yet
2013-02-12 11:44:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Mark an array as const
2013-02-12 11:41:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Split enabling/disabling of port into sending the command and waiting for it
This allows to do anything necessary after sending the command to actually let it finish
2013-02-12 11:37:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Flushing is also allowed in Paused state
2013-02-12 11:28:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Set stride, slice height and buffer size
2013-02-12 11:09:30 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/raspberry-pi.conf:
config: Add h264 and mpeg2 encoders to the raspberry pi config
Not completely working yet though.
2013-02-12 11:03:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Properly negotiate OMX color format with the component
2013-02-12 10:53:24 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Implement getcaps() vfunc
2013-01-29 21:32:53 +0000 Tim-Philipp Müller <tim@centricular.net>
* configure.ac:
configure: use 1.0 gstconfig.h to detect disabled subsystems
Update unused configure check for GStreamer core subsystem
features from 0.10 to 1.0.
2013-01-28 20:44:41 +0100 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From a942293 to 2de221c
2013-01-24 14:02:36 +0100 Julian Scheel <julian@jusst.de>
* config/raspberry-pi.conf:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxmpeg2dec.c:
* omx/gstomxmpeg2dec.h:
omx: add mpeg2 video decoder
This adds a decoder class for mpeg2, as well as an extended
configuration for raspberry pi.
https://bugzilla.gnome.org/show_bug.cgi?id=692446
Signed-off-by: Julian Scheel <julian@jusst.de>
2013-01-18 16:47:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Minimize the time when the messages lock is held
Fixes a deadlock if any OMX functions are called when the
messages are handled.
Thanks to Nicolas Dufresne for noticing.
2013-01-18 15:28:20 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
omx: improve debug message when we can't find the config file
Mention where we looked for the config file.
2013-01-18 12:34:38 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
build: fix autogen.sh with automake 1.13
AM_CONFIG_HEADER -> AC_CONFIG_HEADERS
2013-01-17 18:07:41 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
* omx/gstomxaudioenc.h:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.h:
omx: Fix includes to properly work with the 1.0 releases
2013-01-15 15:08:28 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* common:
Automatic update of common submodule
From a72faea to a942293
2013-01-15 14:34:45 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Update port definition when changing some port setting
2013-01-14 11:41:57 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
omx: Rename from libgstopenmax.so to ligstomx.so for consistency
2013-01-11 15:32:22 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomx.c:
omx: Add a method to send message
2013-01-11 15:44:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Atomic ops are not required anymore for the reconfiguration
2013-01-11 12:52:10 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix some memory leaks and suboptimal locking
2013-01-11 12:34:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Don't forget to unmap frame in error cases
2013-01-11 12:29:20 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix copying of the video frames to the OMX buffers
2013-01-11 12:24:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix copying of the video frames from the OMX buffers
2013-01-10 14:44:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omx: Implement new approach for locking that should solve all deadlocks on RPi
No mutex is locked while calling any OpenMAX functions anymore
and everything from the OpenMAX callbacks is inserted into a message
queue and handled from outside the callbacks.
Also there's only a single mutex and condition variable per component
now for handling anything from OpenMAX callbacks and a single mutex
for keeping our component/port state sane.
2012-12-20 19:30:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Set the OMX buffer nFilledLength field properly
2012-12-20 18:48:21 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omxrecmutex: Fix another race condition when two threads are trying to lock for recursion at the same time
2012-12-20 18:16:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omxrecmutex: Fix yet another race condition that resulted in deadlocks
2012-12-20 17:46:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omx: Fix another race condition in the recursive mutex
Between lock() and begin_recursion() it was possible for another thread to
try to do a recursive_lock(). This would block because the mutex was already
locked(), but not ready for recursive locking yet. unlock() would never
happen in the original thread because it was waiting for the other thread
to finish first.
Happened on the Raspberry Pi.
2012-12-20 14:45:18 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omxrecmutex: Fix a small race condition when unlocking a non-recursive lock
2012-12-20 12:30:05 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix ununsed variable compiler warning
2012-12-20 12:27:47 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: No need to start the srcpad task in ::start() already
It will be started properly after the caps are set.
2012-12-20 12:23:49 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: OMX_ErrorNoMore is no error and just means we ended iteration
2012-12-20 12:20:31 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Improve debug output
2012-12-20 12:02:30 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't forget to free a GList
2012-12-20 11:56:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Map OMX_COLOR_FormatYUV420PackedPlanar to I420 too
This is used on the Raspberry Pi.
2012-12-20 11:55:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: During negotiation of the output format make sure we use the correct OpenMAX format
2012-12-20 11:42:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: If negotiation fails this could also mean that the component can't do it at this point yet
2012-12-20 11:40:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve format negotiation a bit
Don't leak caps and make sure to fixate caps.
2012-12-19 13:05:28 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
omx: Also initialize nStep field of the OMX structures
2012-12-19 13:03:37 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
omx: Initialize struct version with the OMX version we compiled with
2012-12-19 12:44:31 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Extract data from the input buffer, not the codec data
2012-12-19 12:19:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* tools/listcomponents.c:
omx: Use has_suffix() instead of has_prefix() for the Broadcom hack
2012-12-19 12:08:35 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
* configure.ac:
* tools/Makefile.am:
* tools/listcomponents.c:
tools: Add tool to list all components and their roles
2012-12-19 11:31:51 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add hack to load and initialize libbcm_host.so
Needed on the Raspberry Pi. Patch based on a patch by
George Kiagiadakis <george.kiagiadakis@collabora.com>
2012-12-19 11:22:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/gstomx.h:
configure: Add configure option to pack OpenMAX structures
This is required to set to 4 for the Raspberry Pi for example.
2012-12-19 11:07:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
configure: Require GStreamer 1.0.0
2012-04-20 17:13:52 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.h:
omx: Initialize structures to version 1.1.2
2012-12-19 09:51:22 +0000 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
* config/Makefile.am:
* config/raspberry-pi.conf:
* configure.ac:
config: Add raspberry-pi configuration in a different directory
2012-05-20 20:11:59 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx-raspberry.conf:
raspberry: Add a gstomx.conf for the Raspberry Pi
2012-12-12 17:45:39 +0000 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
* omx/gstomxvideoenc.h:
omx: Fix some compilation errors caused by circular includes
2012-11-19 11:29:44 +0000 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 6bb6951 to a72faea
2012-11-12 15:14:09 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix refcount problem with frames being dropped because of decoder bugs
2012-11-12 11:29:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omx: Update to new GLib thread API
2012-10-22 14:34:53 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Use open/close vfuncs
2012-10-22 14:28:04 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Handle video meta correctly
2012-06-20 13:11:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
* omx/gstbasevideoutils.c:
* omx/gstbasevideoutils.h:
* omx/gstomxh263dec.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
* omx/gstomxwmvdec.c:
omx: Port to video base classes from -base
2012-10-17 17:57:43 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomxaacenc.c:
* omx/gstomxh263dec.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxwmvdec.c:
omx: gst_element_class_set_details_simple() -> set_static_metadata()
2012-10-06 15:01:11 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 6c0b52c to 6bb6951
2012-09-22 16:10:38 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 4f962f7 to 6c0b52c
2012-06-21 20:22:13 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
omx: fix debug statement
2012-06-21 20:21:03 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
omx: use recursive_lock inside set_last_error(), since this function may be called from an event handler
2012-08-22 13:31:59 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 668acee to 4f962f7
2012-08-05 16:42:43 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 94ccf4c to 668acee
2012-08-03 19:32:13 +0100 Tim-Philipp Müller <tim@centricular.net>
* omx/gstomx.c:
omx: fix plugin name for new GST_PLUGIN_DEFINE API
2012-07-23 08:47:32 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 98e386f to 94ccf4c
2012-07-10 09:57:09 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
omx: Update for allocation query API changes
2012-06-20 11:09:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix compilation after gst_pad_start_task() API changes
2012-06-08 15:06:35 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From 03a0e57 to 98e386f
2012-06-06 18:20:18 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From 1fab359 to 03a0e57
2012-06-01 10:30:27 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From f1b5a96 to 1fab359
2012-05-31 13:10:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 92b7266 to f1b5a96
2012-05-30 12:47:59 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From ec1c4a8 to 92b7266
2012-05-30 11:26:30 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 3429ba6 to ec1c4a8
2012-05-13 15:58:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From dc70203 to 3429ba6
2012-05-08 16:13:32 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
omx: Fix spelling mistake found by lintian: s/Seperate/Separate/
2012-04-30 23:58:43 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
Implement a new custom recursive mutex type and fix locking in callbacks so that in-context calls are allowed.
According to the OMX specification, implementations are allowed to call
callbacks in the context of their function calls. However, our callbacks
take locks and this causes deadlocks if the unerlying OMX implementation
uses this kind of in-context calls.
A solution to the problem would be a recursive mutex. However, a normal
recursive mutex does not fix the problem because it is not guaranteed
that the callbacks are called from the same thread. What we see in Broadcom's
implementation for example is:
- OMX_Foo is called
- OMX_Foo waits on a condition
- A callback is executed in a different thread
- When the callback returns, its calling function
signals the condition that OMX_Foo waits on
- OMX_Foo wakes up and returns
The solution I came up with here is to take a second lock inside the callback,
but only if recursion is expected to happen. Therefore, all calls to OMX
functions are guarded by calls to gst_omx_rec_mutex_begin_recursion() / _end_recursion(),
which effectively tells the mutex that at this point we want to allow calls
to _recursive_lock() to succeed, although we are still holding the master lock.
2012-04-20 14:51:34 +0000 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add hack to disable setting roles to components.
Conflicts:
omx/gstomx.c
2012-04-30 23:20:24 +0000 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omxvideodec: Implement no-empty-eos-buffer hack, as in omxvideoenc.
Conflicts:
omx/gstomxvideodec.c
2012-04-30 23:19:55 +0000 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: Fix coding style in the drain-may-not-return hack code
2012-04-25 19:03:48 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* omx/gstomx.c:
omx: Fix trivial debug print bug
2012-04-25 19:01:32 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omxvideodec: Add hack for Ducati components not returning from drain
This happens on the Galaxy Nexus, and causes the pipeline to hang waiting
endlessly for a drain. The hack replaces the wait with a wait + 500ms timeout.
2012-04-25 16:35:40 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* omx/gstomx.c:
omx: Fix deadlock between ending a flush and the event handler
gst_omx_port_set_flushing() calls OMX_FillThisBuffer at the end of a flush
without releasing the port lock, and this can cause a deadlock with the
EventHandler. This patches fixes this by dropping the lock for the duration of
the fill buffer call.
2012-04-24 15:41:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
omx: Update video encoder/decoder base classes from gst-plugins-bad
2012-04-16 09:16:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
configure: Modernize autotools setup a bit
Also we now only create tar.bz2 and tar.xz tarballs.
2012-04-16 09:12:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
2012-04-16 08:34:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Use gst_buffer_extract() to copy the input buffer data to the OpenMAX buffer
2012-04-13 17:16:42 -0400 Alessandro Decina <alessandro.decina@collabora.com>
* omx/Makefile.am:
Fix relative/absolute path glitch
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@collabora.com>
2012-04-12 15:57:32 -0400 Olivier Crête <olivier.crete@collabora.com>
* common:
* configure.ac:
* omx/Makefile.am:
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaacenc.c:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxh263dec.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
* omx/gstomxwmvdec.c:
Port to Gst 0.11
2012-01-18 16:53:16 -0300 Reynaldo H. Verdejo Pinochet <reynaldo@collabora.com>
* Android.mk:
* omx/Makefile.am:
Enable building with Android's buildsystem
This change adds prelimary buildsystem hooks to
build gst-omx with the Android buildsystem. Like
the rest of GStreamer's Android hooks, the process
relies on the availability of androgenizer. A tool
developed by Collabora to automatically generate
Android.mk files from within the auto* setup.
Androgenizer is currently available at:
http://cgit.collabora.com/git/user/derek/androgenizer.git/
2011-12-13 10:17:41 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
basevideocodec: Don't use G_TYPE_REGISTER_BOXED() yet
This would require GLib 2.26.
2011-12-14 10:09:34 +0100 Jonas Larsson <Jonas.Larsson@palm.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Add hack for encoder components that don't allow empty EOS buffers
2011-12-14 10:07:29 +0100 Jonas Larsson <Jonas.Larsson@palm.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix deadlock when using the EOS hack
2011-12-12 14:26:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Remove workaround for basevideocodec bug
2011-12-12 14:26:34 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Remove workaround for basevideocodec bug
2011-12-05 17:57:01 +0000 Matej Knopp <matej.knopp@gmail.com>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
basevideo: Make GstVideoFrame a reference counted boxed object
...and also clear all existing frames when resetting the decoder or encoder.
2011-12-09 12:17:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideoenc.c:
omx: Add hack for encoder components that don't allow empty EOS buffers
2011-12-09 10:21:47 +0100 Dake Gu <Dake.Gu@palm.com>
* omx/gstomxaacenc.c:
omxaacenc: Generate and set codec_data on the caps for raw AAC
2011-10-31 11:36:06 +0100 Alessandro Decina <alessandro.decina@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: handle failures in start() and stop()
2011-08-26 10:50:38 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoenc: do not try to calculate latency from an unknown framerate
It'll divide by zero, and latency is unknown for an unknown framerate.
Fixes an assert in the schroenc test.
https://bugzilla.gnome.org/show_bug.cgi?id=657419
2011-12-08 11:50:49 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Only make the header buffer metadata writable, not the buffer
2011-12-08 10:18:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Fix handling of force-keyunit events
2011-12-06 13:28:41 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Don't forward EOS events immediately but let all other events be handled by the base class
Previously this logic was inversed, which did not make any sense at all.
2011-12-06 12:47:25 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-06 12:47:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-06 12:46:51 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-05 13:18:09 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Improve debugging of buffer handling
2011-12-05 08:12:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Drop EOS events in ::finish()
The event will be forwarded downstream from the srcpad
loop function after the last buffer was generated by the
component. Forwarding it after ::finish() will use the
sinkpad streaming thread and does not guarantee that
the encoder is completely drained.
2011-12-01 16:20:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Properly drop frames due to QoS
Instead of finishing them they should be passed to drop(), which
will then send QoS messages.
2011-11-29 12:21:32 +0100 Jonas Larsson <jonas@hallerud.se>
* omx/gstomxh264enc.c:
omxh264enc: Add support for resending headers after a forced-keyframe
2011-11-29 12:12:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.h:
* omx/gstbasevideoencoder.c:
basevideoencoder: Pass the all-headers field of the force-key-unit event to the subclass
2011-11-29 12:12:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Implement full support for the new force-key-unit event
Including support for the running-time and count fields.
2011-11-29 09:31:11 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Use new force-keyunit event API from gst-plugins-base
2011-11-29 09:18:19 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Adjusting padding is not required for -bad libraries
2011-11-28 19:48:01 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.h:
basevideoencoder: Move some fields to the private part of the instance struct
2011-11-28 19:36:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Make headers metadata writable before pushing downstream
The timestamp, duration, etc of the headers has to be changed.
2011-11-28 19:35:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Push the downstream force-keyframe event after the next keyframe
Even if the corresponding GstVideoFrame doesn't have the is_sync_point
flag set.
2011-11-28 19:29:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Don't push an upstream force-keyunit event downstream
2011-11-25 11:48:08 +0100 Jonas Larsson <jonas@hallerud.se>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Add initial support for the all-headers field of the force-keyframe event
See bug #607742.
2011-11-25 11:37:39 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: some more debug logging
2011-11-23 20:03:32 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
basevideodecoder: add API to drop a frame and post a QoS message on the bus
https://bugzilla.gnome.org/show_bug.cgi?id=640017
API: gst_base_video_decoder_drop_frame()
2011-11-22 23:04:49 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstbasevideodecoder.c:
docs: fix comment in gst_base_video_decoder_get_max_decode_time() docs
2011-11-22 19:57:07 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: fix weird event list handling
Get rid of weird code that copies a list manually, taking
ownership of the elements and then frees the old list. Instead,
just take over the old list entirely. (If the intent was to
reverse the list, one could use g_list_reverse() instead).
Then, push events in the list out from last to first (since they
were prepended as they came in) instead of just pushing out the
last in the list and leaking the others.
2011-11-25 11:31:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstbaseaudiodecoder.c:
* omx/gstbaseaudiodecoder.h:
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
* omx/gstbaseaudioutils.c:
* omx/gstbaseaudioutils.h:
* omx/gstomxaacenc.c:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Use audio base classes from gst-plugins-base instead of having our own copies
2011-11-18 10:00:31 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-18 09:59:43 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-18 09:58:58 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-17 14:38:54 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Only disabling of a port is like flushing, enabling is like unflushing
2011-11-17 13:33:35 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Enabling/disabling a port is also like flushing
The component returns all buffers to us and shouldn't get any
new buffers passed anymore.
2011-11-17 11:26:33 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Signal the drain GCond even if downstream returned an error
2011-11-17 11:26:20 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Signal the drain GCond even if downstream returned an error
2011-11-17 11:25:52 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Signal the drain GCond even if downstream returned an error
2011-11-17 10:34:19 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Only call ::reset once in READY->PAUSED
2011-11-17 10:19:35 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-17 10:19:30 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-17 10:19:10 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-16 12:02:08 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Set force_keyframe to FALSE after handling it
There's no reason why the base class should forward the event
further downstream if we already handled it and will insert a
keyframe.
2011-11-16 11:21:25 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Always push buffers downstream, even if we didn't find a corresponding GstVideoFrame
2011-11-15 09:47:55 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Fix debug level for flushing in wrong state from ERROR to DEBUG
It's not really an error and doesn't matter at all if flush is called
when the component is not running.
2011-11-15 08:40:07 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: Detect bytestream stream format and don't put SPS/PPS into the caps for this format
2011-11-15 08:28:32 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Add vfunc for handling the output frames
This can be used by subclasses to override the buffer flags
or to handle some frames differently than the default behaviour.
2011-11-14 12:50:26 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't release buffers twice if dropping because of QoS
2011-11-14 09:13:06 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add XXX to the nOffset reset hack comment for QCOM
2011-11-10 15:18:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Make srcpad caps setting threadsafe
2011-11-10 15:17:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Make srcpad caps setting threadsafe
2011-11-10 15:17:41 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make srcpad caps setting threadsafe
2011-11-10 15:10:14 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Make the srcpad task and the sinkpad streaming thread handling threadsafe
2011-11-10 15:03:05 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Always flush the ports and make sure no processing is happening in ::flush
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-10 15:02:22 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Always flush the ports and make sure no processing is happening in ::reset
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-10 15:01:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix minor race condition when draining after upstream signalled EOS
2011-11-10 14:56:19 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Improve EOS handling
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-10 14:56:11 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Improve EOS handling
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-10 14:54:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Improve debugging of EOS and draining
2011-11-10 14:54:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Improve debugging of EOS and draining
2011-11-10 14:51:06 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Log if acquiring buffer for EOS failed
2011-11-10 14:42:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: The component is not started in READY
2011-11-10 14:39:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: No need to signal the drain cond when going from READY to PAUSED
Also the component is not started in READY
2011-11-10 14:40:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: No need to signal the drain cond when going from READY to PAUSED
Also the component is not started in READY.
2011-11-09 15:46:02 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Always flush the ports and make sure no processing is happening in ::reset
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-09 15:45:20 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix minor race condition when draining after upstream signalled EOS
2011-11-09 15:44:11 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve EOS handling
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-09 15:43:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve debugging of EOS and draining
2011-11-09 15:42:46 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: The component is not started already when going from READY to PAUSED
2011-11-09 15:42:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: No need to signal the drain cond when going from READY to PAUSED
2011-11-09 15:41:02 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always reset buffer flags for output ports, even in flushing/error state
2011-11-09 09:00:57 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve debugging in case of QoS-related frame drops
2011-11-08 12:46:31 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Release the video codec stream lock before acquiring an input buffer
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 12:45:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Release the audio encoder stream lock before acquiring an input buffer
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 12:42:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Release the video codec stream lock before acquiring an input buffer
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 11:07:01 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Don't try to drain the component after EOS
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 11:03:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Don't try to drain the component after EOS
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 10:46:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Don't try to drain the component after EOS
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 09:09:28 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Implement dropping of too late frames via QoS
2011-11-08 08:31:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Minor code refactoring
2011-11-08 08:31:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Minor code refactoring
2011-11-08 08:31:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure to always release buffers back to OMX
2011-11-08 08:24:19 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Also properly release buffers when in error state
2011-11-08 08:22:08 +0100 Jonas Larsson <Jonas.Larsson@palm.com>
* omx/gstomx.c:
omx: Properly release buffers during flushing
We can't pass them back to OMX_FillThisBuffer() or OMX_EmptyThisBuffer()
but instead of doing nothing we have to put them back into our queue.
Otherwise the buffer is leaked and we will have too few buffers in
the future.
2011-11-07 14:00:47 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Free pending frames after draining component
2011-11-07 14:00:35 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Free pending frames after draining the component
2011-11-07 11:07:01 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Make handling and usage of the base video codec frames threadsafe
2011-11-07 11:05:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix deadlock between srcpad stream lock and ::reset()
2011-11-07 11:04:27 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideoenc: Make handling and usage of the base video codec frames threadsafe
2011-11-07 10:58:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Free all pending frames after draining the component
2011-11-07 10:58:24 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Always free all pending frames when caps changes require reconfiguration
2011-11-04 09:43:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Only drain the component a single time and only after processing started
2011-11-04 09:43:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Only drain the component a single time and only after processing started
2011-11-04 09:43:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Only drain the component a single time and only after processing started
2011-11-04 09:04:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset buffer flags to 0 after it was consumed by the component or the element
Some implementations don't reset the flags and the standard is not
really clear on the expected behaviour. Let's just always reset the
flags as they're not valid at this point anymore.
2011-11-02 13:50:14 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Better handling of encoder parameters
Only set them if necessary and allow to use the component
defaults.
2011-11-02 13:22:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Make unsupported bitrate/quantizer settings less fatal
2011-11-02 10:39:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: If no stride was set for the OMX output port assume GStreamer stride
This is not really correct but there's nothing else we could do.
2011-11-02 10:39:10 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: If no stride was set for the OMX input port assume GStreamer stride
This is not really correct but there's nothing else we could do.
2011-11-01 16:46:09 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Implement draining of the component and use it
This makes sure that all buffers are encoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:41:46 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Implement draining of the component and use it
This makes sure that all buffers are encoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:08:59 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Implement draining of the component and use it
This makes sure that all buffers are decoded and pushed downstream
before flushing the ports and losing some buffers.
2011-10-20 14:32:40 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix deadlock if ::reset is called before finding the corresponding frame of a decoded buffer
2011-11-01 15:10:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxvideoenc.h:
omxaudioenc: Forward downstream flow returns to upstream
2011-11-01 15:10:01 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Forward downstream flow returns to upstream
2011-11-01 13:58:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Forward downstream flow returns to upstream
2011-10-25 14:23:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* README:
omx: Add minimal README file
2011-10-20 15:21:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock
2011-10-20 15:20:47 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock
2011-10-20 14:30:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Move locking at the correct place
2011-10-14 10:27:47 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Remove QCOM hack to reset nOffset in EmptyBufferDone
This is now done in a generic way that does not require any
hacks because it will work without any side effects on any
OMX implementation.
2011-10-14 10:26:00 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset nOffset to 0 in EmptyBufferDone if nFilledLen is 0
Some OMX implementations don't reset nOffset when the complete
buffer is emptied but instead only reset nFilledLen. We reset
nOffset to 0 if nFilledLen == 0, which is safe to do because
the offset *must* be 0 if the buffer is not filled at all.
Seen in QCOM's OMX implementation.
2011-10-04 10:56:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: If one parameter/configuration is not supported don't skip the next
2011-10-03 09:12:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
omxh264dec: Require stream-format=byte-stream
Other stream-formats are unlikely to be supported by OMX components.
2011-09-29 10:37:32 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Add API for subclasses to prepare/convert frames
2011-09-27 15:08:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-27 15:08:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-27 15:05:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Switch to Idle first and wait before switching to Loaded and deallocating buffers
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-27 14:15:06 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omxvideodec: New hack for QCOM to recreate the component instead of reconfiguring it on caps changes
2011-09-27 12:13:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Change a g_assert() into a GST_WARNING_OBJECT()
2011-09-26 13:04:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add hack for Qualcomm's OMX implementation to manually reset nOffset in EmptyBufferDone
2011-09-23 17:02:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Add a check to prevent a zero-sized OMX buffer
2011-09-23 17:02:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Add some more checks for correct OMX buffer sizes
2011-09-23 15:53:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Add some more checks for OMX buffer sizes
2011-09-14 10:15:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Wait until the Executing state is reached before calling OMX_FillThisBuffer()
This correctly works around the QCOM race condition that happens when calling
FTB after setting the new state and before reaching it.
2011-09-02 14:43:43 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Negotiate video format with downstream and what the component claims to support
2011-08-25 19:56:58 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: fix element leak
and this concludes an hour of yelling at the bloody test failing,
only to track down the problem not being in the test.
https://bugzilla.gnome.org/show_bug.cgi?id=657368
2011-08-19 09:20:39 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Release basevideocodec stream lock while waiting for a buffer
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-19 09:19:22 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Release basevideocodec stream lock while waiting for a buffer
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-18 10:24:26 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Fix deadlock
2011-08-18 10:03:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
baseaudiodecoder: Don't take the stream lock in the seek handler
This will lead to deadlocks
2011-08-18 10:02:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
basevideo: Fix locking, especially if both pads have different streaming threads
2011-08-18 09:42:02 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
basevideo: Don't call g_type_class_peek_parent() in class_init
This is already done by the GObject boilerplate macro
2011-08-18 09:40:46 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
baseaudiodecoder: Don't call g_type_class_peek_parent() in class_init
This is already done by the boilerplate macro
2011-08-18 09:34:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
* omx/gstbaseaudiodecoder.h:
baseaudiodecoder: Fix thread safety issues if both pads have different streaming threads
2011-08-18 09:17:04 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
baseaudiodecoder: Delay sending of serialized events to finish_frame()
2011-08-17 14:33:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Always require at least OMX_MIN_PCMPAYLOAD_MSEC per input buffer
2011-08-17 14:28:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
baseaudioencoder: Add support for requesting a minimum and maximum number of samples per frame
This extends the special case of a fixed number of samples per frame
that was supported before already.
2011-08-17 14:17:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Handle inbuf==NULL properly in ::handle_frame()
2011-08-17 13:04:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaacenc.c:
omxaacenc: Implement ::get_num_samples() vfunc
2011-08-17 13:03:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Add vfunc to get the number of samples inside a buffer
2011-08-17 11:34:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Release baseaudioencoder stream lock while waiting for a buffer in ::handle_frame()
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-17 11:34:04 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
baseaudioencoder: Fix thread safety issues if both pads have different streaming threads
2011-08-17 09:58:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudioencoder.c:
baseaudioencoder: Taking the OBJECT lock in reset() is not needed
2011-08-16 11:03:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Remove hack that only applies to the video encoder class
2011-08-16 10:49:21 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.conf:
* omx/gstomxaacenc.c:
* omx/gstomxaacenc.h:
omxaacenc: Add initial version of OpenMAX AAC encoder element
2011-08-15 15:10:04 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Add initial version of audio encoder base class
2011-08-15 14:14:11 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudioencoder.c:
baseaudioencoder: Delay sending of serialized events to finish_frame()
2011-08-15 13:06:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstbaseaudiodecoder.c:
* omx/gstbaseaudiodecoder.h:
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
audio: Integrate audio base classes into the build system and fixup
2011-08-15 12:56:00 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
* omx/gstbaseaudiodecoder.h:
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
* omx/gstbaseaudioutils.c:
* omx/gstbaseaudioutils.h:
audio: Add audio decoder/encoder base classes
Taken from http://cgit.collabora.com/git/user/manauw/gst-plugins-bad.git/log/?h=baseaudio
2011-08-12 12:25:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Proxy the width/height/framerate/PAR constraints of downstream caps to upstream
This allows to specify constraints on the compressed downstream caps
by muxers or capsfilters, which will then be forwarded to upstream
and allows video converters to fulfill the constraints.
Code based on Mark Nauwelaerts audio encoder base class.
2011-08-12 12:13:45 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.h:
basevideoencoder: Remove old ::getcaps() comment
2011-08-12 12:06:23 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Remove ::get_caps() vfunc
Subclasses can set the caps more efficiently and this only
caused additional indirections.
2011-08-10 10:24:21 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideoenc.c:
omxvideoenc: Use "video/x-raw-yuv" as sink template caps instead of strict I420 caps
2011-08-10 10:23:39 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxmpeg4videodec.c:
omxmpeg4videodec: Don't require width/height on sink pad caps
2011-08-10 10:11:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263dec.c:
* omx/gstomxh264dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
* omx/gstomxwmvdec.c:
omxvideodec: Use "video/x-raw-yuv" as src template caps instead of strict I420 caps
2011-08-10 09:56:30 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Set the state back to StateLoaded even if an error happened
2011-08-10 09:49:57 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Don't hold any locks while calling OMX_SendCommand()
It might call into one of the callbacks and lead to deadlocks, e.g.
with the Qualcomm OMX implementation.
2011-08-10 09:32:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Move some code
2011-08-10 09:23:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset pending reconfigure output ports when changing the state from Executing to any lower state
2011-08-10 09:08:00 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Fix crash when setting last error after the ports were freed
2011-08-10 09:03:52 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Free component structure
2011-08-10 09:02:52 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Make component destruction safer
2011-08-10 08:53:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Set pAppPrivate of buffers to NULL when deallocating buffers
This prevents usage of freed memory later if the OMX component
has weird behaviour.
2011-08-10 08:52:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Set the state back to StateLoaded even if an error happened
2011-08-10 08:51:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add some assertions to check if the buffer pAppPrivate is still correct
2011-08-08 13:04:30 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
omx: Add parenthesis at correct places in the struct init macro
2011-08-08 12:12:58 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Only prevent setting a higher state if the component is in an error state
2011-08-03 16:02:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Use the cached video frame size instead of recalculating it
2011-08-03 15:35:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Improve debugging in param/config getter/setter wrappers
2011-08-03 13:10:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't abort if the color format is not supported but give a useful error message
2011-08-02 15:14:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideoenc.c:
omxvideoenc: Don't fail if setting the bitrate or profile is not supported by the component
Also always set/get the profile, even if there are no peer caps.
2011-08-02 15:14:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Make access to the list of frames threadsafe
2011-08-01 13:22:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add a hacks flag for the Qualcomm 7x30 OMX_FillThisBuffer() race and make it optional
2011-07-29 13:56:59 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add workaround for QCOM 7x30 race condition
2011-07-29 12:06:21 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh263enc.c:
* omx/gstomxh263enc.h:
omxh263enc: Add H.263 encoder element
2011-07-29 11:26:39 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxmpeg4videoenc.c:
omxmpeg4videoenc: Add support for setting profile/level via caps
2011-07-28 14:14:45 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: Add support for setting profile/level via caps
2011-07-28 12:58:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Add support for forcing the next frame to be a keyframe
2011-07-28 11:54:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Add support for setting bitrate/quantization related parameters
2011-07-28 10:23:08 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add wrapper functions for OMX_[GS]et{Config,Parameter}
2011-07-28 09:54:53 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add macro to initialize OpenMAX structures
2011-07-28 09:08:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Don't output 0-byte buffers
2011-07-25 15:05:08 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Ensure that the pAppPrivate pointer in OMX buffers is set correctly
2011-07-25 13:19:06 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo{enc,dec}: Only set/unset flushing state on ports if they were created already
2011-07-25 12:01:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxwmvdec.c:
* omx/gstomxwmvdec.h:
omxwmvdec: Add WMV video decoder element
2011-07-25 11:44:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh263dec.c:
* omx/gstomxh263dec.h:
omxh263dec: Add H.263 decoder element
2011-07-25 11:32:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: Add H.264 encoder element
2011-07-25 10:48:58 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Try harder to deallocate the buffers after errors happened
2011-07-25 10:47:28 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Try harder to deallocate the buffers after errors happened
2011-07-25 10:46:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Deallocate port buffers before freeing the component
They should be deallocated by the caller before reaching the
Loaded state but to be on the safe side we will make sure
they're really deallocated here.
2011-07-21 11:15:14 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Add initial support for stride conversion
2011-07-21 10:38:26 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
omx: Set default roles for the components if none were set from the config file
2011-07-21 10:36:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Failure to set the component role is fatal
2011-07-21 07:53:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Add support for setting codec_data on the srcpad caps
2011-07-21 07:44:34 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Free/drop GstVideoFrames that resulted in an empty buffer
2011-07-21 07:44:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Allow finishing of frames with no src_buffer to drop/free the GstVideoFrame
2011-07-21 07:31:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Remove obsolete TODO comment
2011-07-20 11:09:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
omx: Use libgstopenmax.so for the plugin filename and openmax for the plugin name
Resolves conflicts with gst-openmax.
2011-07-20 08:34:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.conf:
* omx/gstomx.h:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxmpeg4videoenc.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Add video encoder base class and MPEG4 video encoder
Unfortunately requires lots of hacks again to work properly with
Bellagio.
2011-07-20 10:39:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Only get caps from the subclass if they were not set yet by the subclass
2011-07-20 09:25:28 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Delay sending of serialized sink events until finish_frame()
2011-07-20 09:09:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Add ::reset vfunc and handle ::reset/::finish the same way as in the decoder
2011-07-19 12:50:43 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Use a temporary GstVideoState until the subclass accepted the caps
Also store the caps in the GstVideoState and assume a PAR of 1/1 instead
of 0/1 if no PAR is specified in the caps.
2011-07-19 12:29:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxvideodec.c:
omx: Improve debug output a bit
2011-07-19 10:33:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Rework port reconfiguration again and only use the Bellagio specific hacks with Bellagio
We only reconfigure ports that need to be reconfigured now instead of
always all ports.
2011-07-19 10:33:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.conf:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omx: Add infrastructure to enable special hacks for broken OpenMAX implementations
2011-07-18 13:10:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: When acquiring a buffer from an input port always wait until all output ports are reconfigured
2011-07-18 08:41:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Add support for converting between omx and gst rowstrides
2011-07-14 10:34:09 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Provide all buffers to output ports after enabling them
2011-07-14 08:29:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Add support for NV12 / OMX_COLOR_FormatYUV420SemiPlanar
2011-07-14 07:58:41 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Only flush the component ports after we passed input to them
2011-07-13 21:19:34 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Only change states downwards if an upper state was reached
2011-07-13 20:37:02 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omx: Add support for setting the component-role
2011-07-13 20:22:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Improve error reporting by formatting the error codes better and also providing their string representation
2011-07-13 14:36:14 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
build: Dist autogen.sh
2011-07-13 14:35:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/gstomx.c:
build: Only require GStreamer >= 0.10.29 and GLib >= 2.16
2011-07-13 14:04:47 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
build: Dist gstomx.conf
2011-07-13 14:04:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
build: Clean _stdint.h on "make distclean"
2011-07-13 14:02:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix typo
2011-07-13 13:59:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
omx: Dist gstomx.h
2011-07-13 12:46:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Set SYNCFRAME flag on the OMX buffers for non-delta units
2011-07-13 12:37:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Free all pending frames when resetting the decoder
Workaround for https://bugzilla.gnome.org/show_bug.cgi?id=654529
2011-07-13 09:59:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Handle output buffers without a corresponding GstVideoFrame more gracefully
This can happen on EOS in some cases and when the input is not
properly framed.
2011-07-13 09:31:22 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix deadlock when finishing old frames that are left over by the decoder
2011-07-12 11:37:28 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
omxh264dec: It's called H.264, not H264
2011-07-12 11:36:42 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Make sink/src pad template caps configurable
2011-07-12 11:13:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Allow to set a preferred configuration directory with the GST_OMX_CONFIG_DIR environment variable
2011-07-12 10:55:57 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
omxvideodec: Make core/component-name and in/outport index configurable
2011-07-12 10:05:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.conf:
* omx/gstomx.h:
omx: Add initial version of configuration system
This now only registers elements that are specified in the
configuration file.
The configuration file is a keyfile in the first XDG configuration
directory with the name gstomx.conf.
2011-07-12 08:53:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264dec.h:
* omx/gstomxh264videodec.h:
omxh264dec: Rename from omxh264videodec to omxh264dec
2011-07-12 08:40:48 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264videodec.c:
omxh264videodec: Require alignment=au and stream-format={avc,bytestream}
2011-07-11 12:59:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: First inform subclass about resetting before resetting/freeing all internal state
The subclass might want to access the old state.
2011-07-11 12:36:42 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Track present position on discont before resetting it
2011-07-11 11:52:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Also protect the list of pending frames from concurrent access when pushing all pendings events
2011-07-11 11:28:40 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
basevideocodec: Protect access to the list of pending frames with the object lock
This is required if ::finish_frame() and all buffer output happens
on a different thread than the sinkpad streaming thread.
2011-07-11 09:35:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Set the correct lists to NULL after freeing
2011-07-11 08:54:53 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Work with a copy of the GstVideoState in setcaps until the caps are accepted
Also fix a refcount problem with the codec_data.
2011-07-12 08:34:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh264videodec.c:
* omx/gstomxh264videodec.h:
omxh264videodec: Add h.264 video decoder
2011-07-12 08:29:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxmpeg4videodec.c:
omxmpeg4videodec: Fix debug category name
2011-07-09 11:41:42 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoutils.c:
* omx/gstbasevideoutils.h:
basevideo: Move the utils from the codec header to its own header
2011-07-09 11:32:06 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideodecoder.c:
basevideo: Use GSlice for allocating GstVideoFrame and don't duplicate code in the decoder base class
2011-07-09 11:05:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Use the destroy notify to free the coder_hook
2011-07-09 10:57:52 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
basevideo: Add destroy notify for the coder_hook to prevent memory leaks
Fixes bug #654293.
2011-07-09 10:44:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
basevideo: Fix GType names to not conflict with the public video base classes
It's still not possible to include headers of both in the same file
or compile/link both into the same plugin but that shouldn't be
necessary anyway.
2011-07-08 15:42:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix some minor memory leaks
2011-07-08 15:25:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Rework port reconfiguration
We always reconfigure all ports now if the settings of one
port changes to prevent lots of race conditions, dropped
frames and similar issues.
2011-07-08 13:16:45 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Use the frames storage of the base class instead of implementing our own
They could get out of sync and we could store already destroyed frames.
2011-07-07 12:51:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
omx: Clarify GQueue/GPtrArray element types
2011-07-07 12:23:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Add more checks to acquire_buffer() and return the current state additional to the buffer
Also refactor the code flow in the video decoder for this. This makes
the usage of acquire_buffer() easier and more atomic.
2011-07-07 12:22:57 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Also flush/unflush the input port when changing the state PAUSED<->READY
2011-07-07 12:21:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Don't broadcast port->port_cond after allocating buffers successfully
Allocating buffers must happen while no thread is waiting for the
cond and especially must happen from the thread that would acquire
buffers from the port.
2011-07-07 11:27:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't leak the codec_data after sending it
2011-07-07 10:27:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always check if the component is in an error state before waiting for a condition variable to be signalled
Otherwise we might wait forever because nothing is going to signal
the condition variable anymore.
2011-07-07 10:22:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always hold port->port_lock before signalling port->port_cond when notifying about errors
Otherwise a port might be in the critical section, has checked the error state
already but waits after port->port_cond is signalled, which will lead
to a deadlock.
2011-07-07 10:07:43 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Remove reconfiguration test hack
2011-07-06 13:27:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Improve debug output a bit
2011-07-06 13:26:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always try to deallocate buffers, even if there's a component error
2011-07-06 13:26:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Use G_USEC_PER_SEC for clarity instead of 1000000
2011-07-06 13:19:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Error out if the GStreamer allocated buffer is smaller than the OpenMAX output buffer
Usually this must never happen but currently it happens during reconfigurations
because of a race condition. Still it's better than crashing.
2011-07-06 10:40:13 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Don't use port_def.bEnabled to check if the Enable/Disable command is finished
bEnabled should be set immediately after sending the command, it's only
Bellagio that waits until the command is finished before setting it.
2011-07-06 10:30:11 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Remove obsolete FIXME comment
2011-07-06 10:29:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Improve error handling and reporting
2011-07-06 08:48:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Make the inport and outport index configurable by the subclass
2011-06-28 08:51:23 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videodec.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omx: Add initial version of OpenMAX framework, video decoder base class and MPEG4 video decoder
This currently hardcodes a lot of stuff but works at least.
Also adds a generic framework for handling OpenMAX cores, components
and ports.
2011-06-28 11:47:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
basevideodecoder: Don't reorder serialized src events
And allow to drop EOS by the subclass if ::finish returns
DROPPED.
Fixes bug #653544.
2011-06-27 09:41:40 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
basevideo: Add the caps to the GstVideoState and clean up caps/codec_data properly
2011-06-27 09:37:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
* omx/gstbasevideoutils.c:
basevideo: Add video encoder/decoder base classes from gst-plugins-bad
2011-06-21 11:17:35 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/openmax/OMX_Audio.h:
* omx/openmax/OMX_Component.h:
* omx/openmax/OMX_ComponentExt.h:
* omx/openmax/OMX_ContentPipe.h:
* omx/openmax/OMX_Core.h:
* omx/openmax/OMX_CoreExt.h:
* omx/openmax/OMX_IVCommon.h:
* omx/openmax/OMX_Image.h:
* omx/openmax/OMX_Index.h:
* omx/openmax/OMX_IndexExt.h:
* omx/openmax/OMX_Other.h:
* omx/openmax/OMX_Types.h:
* omx/openmax/OMX_Video.h:
* omx/openmax/OMX_VideoExt.h:
openmax: Add OpenMAX IL 1.1.2 headers
Reference in a new issue View git blame Copy permalink