gstreamer/docs/manual/advanced-dataaccess.xml
Ronald S. Bultje dcd0e06448 docs/manual/advanced-dataaccess.xml: Fix fakesrc example to compile; doesn't work, bug somewhere...?
Original commit message from CVS:
* docs/manual/advanced-dataaccess.xml:
Fix fakesrc example to compile; doesn't work, bug somewhere...?
* docs/manual/basics-pads.xml:
Add reference for filtered caps to above chapter.
2005-06-30 09:59:27 +00:00

338 lines
13 KiB
XML

<chapter id="chapter-dataaccess">
<title>Pipeline manipulation</title>
<para>
This chapter will discuss how you can manipulate your pipeline in several
ways from your application on. Parts of this chapter are downright
hackish, so be assured that you'll need some programming knowledge
before you start reading this.
</para>
<para>
Topics that will be discussed here include how you can insert data into
a pipeline from your application, how to read data from a pipeline,
how to manipulate the pipeline's speed, length, starting point and how
to listen to a pipeline's data processing.
</para>
<sect1 id="section-data-probe">
<title>Data probing</title>
<para>
Probing is best envisioned as a pad listener. Technically, a probe is
nothing more than a signal callback that can be attached to a pad.
Those signals are by default not fired at all (since that may have a
negative impact on performance), but can be enabled by attaching a
probe using <function>gst_pad_add_data_probe ()</function> or one of
the similar functions. Those functions attach the signal handler and
enable the actual signal emission. Similarly, one can use the
<function>gst_pad_remove_data_probe ()</function> or related functions
to remove the signal handlers again. It is also possible to only listen
to events or only to buffers (and ignore the other).
</para>
<para>
Probes run in pipeline threading context, so callbacks should try to
not block and generally not do any weird stuff, since this could
have a negative impact on pipeline performance or, in case of bugs,
cause deadlocks or crashes. However, most common buffer operations
that elements can do in <function>_chain ()</function> functions, can
be done in probe callbacks as well. The example below gives a short
impression on how to use them.
</para>
<programlisting><!-- example-begin probe.c -->
#include &lt;gst/gst.h&gt;
static gboolean
cb_have_data (GstPad *pad,
GstBuffer *buffer,
gpointer u_data)
{
gint x, y;
guint16 *data = (guint16 *) GST_BUFFER_DATA (buffer), t;
/* invert data */
for (y = 0; y &lt; 288; y++) {
for (x = 0; x &lt; 384 / 2; x++) {
t = data[384 - 1 - x];
data[384 - 1 - x] = data[x];
data[x] = t;
}
data += 384;
}
return TRUE;
}
gint
main (gint argc,
gchar *argv[])
{
GMainLoop *loop;
GstElement *pipeline, *src, *sink, *filter, *csp;
GstPad *pad;
/* init GStreamer */
gst_init (&amp;argc, &amp;argv);
loop = g_main_loop_new (NULL, FALSE);
/* build */
pipeline = gst_pipeline_new ("my-pipeline");
src = gst_element_factory_make ("videotestsrc", "src");
filter = gst_element_factory_make ("capsfilter", "filter");
csp = gst_element_factory_make ("ffmpegcolorspace", "csp");
sink = gst_element_factory_make ("xvimagesink", "sink");
gst_element_link_many (src, filter, csp, sink, NULL);
gst_bin_add_many (GST_BIN (pipeline), src, filter, csp, sink, NULL);
g_object_set (G_OBJECT (filter), "filter-caps",
gst_caps_new_simple ("video/x-raw-rgb",
"width", G_TYPE_INT, 384,
"height", G_TYPE_INT, 288,
"framerate", G_TYPE_DOUBLE, (gdouble) 25.0,
"bpp", G_TYPE_INT, 16,
"depth", G_TYPE_INT, 16,
"endianness", G_TYPE_INT, G_BYTE_ORDER,
NULL), NULL);
pad = gst_element_get_pad (src, "src");
gst_pad_add_buffer_probe (pad, G_CALLBACK (cb_have_data), NULL);
gst_object_unref (pad);
/* run */
gst_element_set_state (pipeline, GST_STATE_PLAYING);
g_main_loop_run (loop);
/* exit */
gst_element_set_state (pipeline, GST_STATE_NULL);
gst_object_unref (pipeline);
return 0;
}
<!-- example-end probe.c --></programlisting>
<para>
Compare that output with the output of <quote>gst-launch-0.9
videotestsrc ! xvimagesink</quote>, just so you know what you're
looking for.
</para>
</sect1>
<sect1 id="section-data-spoof">
<title>Manually adding or removing data from/to a pipeline</title>
<para>
Many people have expressed the wish to use their own sources to inject
data into a pipeline. Some people have also expressed the wish to grab
the output in a pipeline and take care of the actual output inside
their application. While either of these methods are stongly
discouraged, &GStreamer; offers hacks to do this. <emphasis>However,
there is no support for those methods.</emphasis> If it doesn't work,
you're on your own. Also, synchronization, thread-safety and other
things that you've been able to take for granted so far are no longer
guanranteed if you use any of those methods. It's always better to
simply write a plugin and have the pipeline schedule and manage it.
See the Plugin Writer's Guide for more information on this topic. Also
see the next section, which will explain how to embed plugins statically
in your application.
</para>
<para>
After all those disclaimers, let's start. There's three possible
elements that you can use for the above-mentioned purposes. Those are
called <quote>fakesrc</quote> (an imaginary source),
<quote>fakesink</quote> (an imaginary sink) and <quote>identity</quote>
(an imaginary filter). The same method applies to each of those
elements. Here, we will discuss how to use those elements to insert
(using fakesrc) or grab (using fakesink or identity) data from a
pipeline, and how to set negotiation.
</para>
<para>
Those who're paying close attention, will notice that the purpose
of identity is almost identical to that of probes. Indeed, this is
true. Probes allow for the same purpose, and a bunch more, and
with less overhead plus dynamic removing/adding of handlers, but
apart from those, probes and identity have the same purpose, just
in a completely different implementation type.
</para>
<sect2 id="section-spoof-handoff">
<title>Inserting or grabbing data</title>
<para>
The three before-mentioned elements (fakesrc, fakesink and identity)
each have a <quote>handoff</quote> signal that will be called in
the <function>_get ()</function>- (fakesrc) or <function>_chain
()</function>-function (identity, fakesink). In the signal handler,
you can set (fakesrc) or get (identity, fakesink) data to/from the
provided buffer. Note that in the case of fakesrc, you have to set
the size of the provided buffer using the <quote>sizemax</quote>
property. For both fakesrc and fakesink, you also have to set the
<quote>signal-handoffs</quote> property for this method to work.
</para>
<para>
Note that your handoff function should <emphasis>not</emphasis>
block, since this will block pipeline iteration. Also, do not try
to use all sort of weird hacks in such functions to accomplish
something that looks like synchronization or so; it's not the right
way and will lead to issues elsewhere. If you're doing any of this,
you're basically misunderstanding the &GStreamer; design.
</para>
</sect2>
<sect2 id="section-spoof-format">
<title>Forcing a format</title>
<para>
Sometimes, when using fakesrc as a source in your pipeline, you'll
want to set a specific format, for example a video size and format
or an audio bitsize and number of channels. You can do this by
forcing a specific <classname>GstCaps</classname> on the pipeline,
which is possible by using <emphasis>filtered caps</emphasis>. You
can set a filtered caps on a link by using the
<quote>capsfilter</quote> element in between the two elements, and
specifying a <classname>GstCaps</classname> as
<quote>filter-caps</quote> property on this element. It will then
only allow types matching that specified capability set for
negotiation.
</para>
</sect2>
<sect2 id="section-spoof-example">
<title>Example application</title>
<para>
This example application will generate black/white (it switches
every second) video to an X-window output by using fakesrc as a
source and using filtered caps to force a format. Since the depth
of the image depends on your X-server settings, we use a colorspace
conversion element to make sure that the output to your X server
will have the correct bitdepth. You can also set timestamps on the
provided buffers to override the fixed framerate.
</para>
<programlisting><!-- example-begin fakesrc.c -->
#include &lt;string.h&gt; /* for memset () */
#include &lt;gst/gst.h&gt;
static void
cb_handoff (GstElement *fakesrc,
GstBuffer *buffer,
GstPad *pad,
gpointer user_data)
{
static gboolean white = FALSE;
/* this makes the image black/white */
memset (GST_BUFFER_DATA (buffer), white ? 0xff : 0x0,
GST_BUFFER_SIZE (buffer));
white = !white;
}
gint
main (gint argc,
gchar *argv[])
{
GstElement *pipeline, *fakesrc, *flt, *conv, *videosink;
GMainLoop *loop;
/* init GStreamer */
gst_init (&amp;argc, &amp;argv);
loop = g_main_loop_new (NULL, FALSE);
/* setup pipeline */
pipeline = gst_pipeline_new ("pipeline");
fakesrc = gst_element_factory_make ("fakesrc", "source");
flt = gst_element_factory_make ("capsfilter", "flt");
conv = gst_element_factory_make ("ffmpegcolorspace", "conv");
videosink = gst_element_factory_make ("xvimagesink", "videosink");
/* setup */
g_object_set (G_OBJECT (flt), "filter-caps",
gst_caps_new_simple ("video/x-raw-rgb",
"width", G_TYPE_INT, 384,
"height", G_TYPE_INT, 288,
"framerate", G_TYPE_DOUBLE, (gdouble) 1.0,
"bpp", G_TYPE_INT, 16,
"depth", G_TYPE_INT, 16,
"endianness", G_TYPE_INT, G_BYTE_ORDER,
NULL), NULL);
gst_element_link_many (fakesrc, flt, conv, videosink, NULL);
gst_bin_add_many (GST_BIN (pipeline), fakesrc, flt, conv, videosink, NULL);
/* setup fake source */
g_object_set (G_OBJECT (fakesrc),
"signal-handoffs", TRUE,
"sizemax", 384 * 288 * 2,
"sizetype", 2, NULL);
g_signal_connect (fakesrc, "handoff", G_CALLBACK (cb_handoff), NULL);
/* play */
gst_element_set_state (pipeline, GST_STATE_PLAYING);
g_main_loop_run (loop);
/* clean up */
gst_element_set_state (pipeline, GST_STATE_NULL);
gst_object_unref (GST_OBJECT (pipeline));
return 0;
}
<!-- example-end fakesrc.c --></programlisting>
</sect2>
</sect1>
<sect1 id="section-data-manager">
<title>Embedding static elements in your application</title>
<para>
The <ulink type="http"
url="http://gstreamer.freedesktop.org/data/doc/gstreamer/head/pwg/html/index.html">Plugin
Writer's Guide</ulink> describes in great detail how to write elements
for the &GStreamer; framework. In this section, we will solely discuss
how to embed such elements statically in your application. This can be
useful for application-specific elements that have no use elsewhere in
&GStreamer;.
</para>
<para>
Dynamically loaded plugins contain a structure that's defined using
<function>GST_PLUGIN_DEFINE ()</function>. This structure is loaded
when the plugin is loaded by the &GStreamer; core. The structure
contains an initialization function (usually called
<function>plugin_init</function>) that will be called right after that.
It's purpose is to register the elements provided by the plugin with
the &GStreamer; framework. If you want to embed elements directly in
your application, the only thing you need to do is to manually run
this structure using <function>_gst_plugin_register_static
()</function>. The initialization will then be called, and the elements
will from then on be available like any other element, without
them having to be dynamically loadable libraries. In the example below,
you would be able to call <function>gst_element_factory_make
("my-element-name", "some-name")</function> to create an instance
of the element.
</para>
<programlisting>
/*
* Here, you would write the actual plugin code.
*/
[..]
static gboolean
register_elements (GstPlugin *plugin)
{
return gst_element_register (plugin, "my-element-name",
GST_RANK_NONE, MY_PLUGIN_TYPE);
}
static GstPluginDesc plugin_desc = {
GST_VERSION_MAJOR,
GST_VERSION_MINOR,
"my-private-plugins",
"Private elements of my application",
register_elements,
NULL,
"0.0.1",
"LGPL",
"my-application",
"http://www.my-application.net/",
GST_PADDING_INIT
};
/*
* Call this function right after calling gst_init ().
*/
void
my_elements_init (void)
{
_gst_plugin_register_static (&amp;plugin_desc);
}
</programlisting>
</sect1>
</chapter>