mirror of
https://gitlab.freedesktop.org/gstreamer/gstreamer.git
synced 2024-09-09 05:38:58 +00:00
Original commit message from CVS: * docs/design-audiosinks.txt: * gst-libs/gst/audio/TODO: * gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_get_type), (gst_audioringbuffer_class_init), (audioringbuffer_thread_func), (gst_audioringbuffer_init), (gst_audioringbuffer_acquire), (gst_audioringbuffer_release), (gst_audioringbuffer_play), (gst_audioringbuffer_stop), (gst_audioringbuffer_delay), (gst_audiosink_class_init), (gst_audiosink_create_ringbuffer): * gst-libs/gst/audio/gstbaseaudiosink.c: (gst_baseaudiosink_class_init), (gst_baseaudiosink_init), (gst_baseaudiosink_get_clock), (gst_baseaudiosink_get_time), (gst_baseaudiosink_set_property), (build_linear_format), (debug_spec_caps), (debug_spec_buffer), (gst_baseaudiosink_setcaps), (gst_baseaudiosink_get_times), (gst_baseaudiosink_event), (gst_baseaudiosink_preroll), (gst_baseaudiosink_render), (gst_baseaudiosink_create_ringbuffer), (gst_baseaudiosink_callback), (gst_baseaudiosink_change_state): * gst-libs/gst/audio/gstringbuffer.c: (gst_ringbuffer_get_type), (gst_ringbuffer_set_callback), (gst_ringbuffer_acquire), (gst_ringbuffer_release), (gst_ringbuffer_play), (gst_ringbuffer_pause), (gst_ringbuffer_stop), (gst_ringbuffer_delay), (gst_ringbuffer_played_samples), (gst_ringbuffer_set_sample), (wait_segment), (gst_ringbuffer_commit), (gst_ringbuffer_prepare_read), (gst_ringbuffer_advance), (gst_ringbuffer_clear): More work on the audiosink, mostly debugging and a race in shutdown.
138 lines
5.3 KiB
Text
138 lines
5.3 KiB
Text
Audiosink design
|
|
----------------
|
|
|
|
Requirements:
|
|
|
|
- must operate chain based.
|
|
Most simple playback pipelines will push audio from the decoders
|
|
into the audio sink.
|
|
|
|
- must operate getrange based
|
|
Most professional audio applications will operate in a mode where
|
|
the audio sink pulls samples from the pipeline. This is typically
|
|
done in a callback from the audiosink requesting N samples. The
|
|
callback is either scheduled from a thread or from an interrupt
|
|
from the audio hardware device.
|
|
|
|
- Exact sample accurate clocks.
|
|
the audiosink must be able to provide a clock that is sample
|
|
accurate even if samples are dropped or when discontinuities are
|
|
found in the stream.
|
|
|
|
- Exact timing of playback.
|
|
The audiosink must be able to play samples at their exact times.
|
|
|
|
- use DMA access when possible.
|
|
When the hardware can do DMA we should use it. This should also
|
|
work over bufferpools to avoid data copying to/from kernel space.
|
|
|
|
|
|
Design:
|
|
|
|
The design is based on a set of base classes and the concept of a
|
|
ringbuffer of samples.
|
|
|
|
+-----------+ - provide preroll, rendering, timing
|
|
+ basesink + - caps nego
|
|
+-----+-----+
|
|
|
|
|
+-----V----------+ - manages ringbuffer
|
|
+ baseaudiosink + - manages scheduling (push/pull)
|
|
+-----+----------+ - manages clock/query/seek
|
|
| - manages scheduling of samples in the ringbuffer
|
|
| - manages caps parsing
|
|
|
|
|
+-----V------+ - default ringbuffer implementation with a GThread
|
|
+ audiosink + - subclasses provide open/read/close methods
|
|
+------------+
|
|
|
|
The ringbuffer is a contiguous piece of memory divided into segtotal
|
|
pieces of segments. Each segment has segsize bytes.
|
|
|
|
play position
|
|
v
|
|
+---+---+---+-------------------------------------+----------+
|
|
+ 0 | 1 | 2 | .... | segtotal |
|
|
+---+---+---+-------------------------------------+----------+
|
|
<--->
|
|
segsize bytes = N samples * bytes_per_sample.
|
|
|
|
|
|
The ringbuffer has a play position, which is expressed in
|
|
segments. The play position is where the device is currently reading
|
|
samples from the buffer.
|
|
|
|
The ringbuffer can be put to the PLAYING or STOPPED state.
|
|
|
|
In the STOPPED state no samples are played to the device and the play
|
|
pointer does not advance.
|
|
|
|
In the PLAYING state samples are written to the device and the ringbuffer
|
|
should call a configurable callback after each segment is written to the
|
|
device. In this state the play pointer is advanced after each segment is
|
|
written.
|
|
|
|
A write operation to the ringbuffer will put new samples in the ringbuffer.
|
|
If there is not enough space in the ringbuffer, the write operation will
|
|
block. The playback of the buffer never stops, even if the buffer is
|
|
empty. When the buffer is empty, silence is played by the device.
|
|
|
|
The ringbuffer is implemented with lockfree atomic operations, especially
|
|
on the reading side so that low-latency operations are possible.
|
|
|
|
Whenever new samples are to be put into the ringbuffer, the position of the
|
|
read pointer is taken. The required write position is taken and the diff
|
|
is made between the required qnd actual position. If the defference is <0,
|
|
the sample is too late. If the difference is bigger than segtotal, the
|
|
writing part has to wait for the play pointer to advance.
|
|
|
|
|
|
Scheduling:
|
|
|
|
- chain based mode:
|
|
|
|
In chain based mode, bytes are written into the ringbuffer. This operation
|
|
will eventually block when the ringbuffer is filled.
|
|
|
|
When no samples arrive in time, the ringbuffer will play silence. Each
|
|
buffer that arrives will be placed into the ringbuffer at the correct
|
|
times. This means that dropping samples or inserting silence is done
|
|
automatically and very accurate and independend of the play pointer.
|
|
|
|
In this mode, the ringbuffer is usually kept as full as possible. When
|
|
using a small buffer (small segsize and segtotal), the latency for audio
|
|
to start from the sink to when it is played can be kept low but at least
|
|
one context switch has to be made between read and write.
|
|
|
|
- getrange based mode
|
|
|
|
In getrange based mode, the baseaudiosink will use the callback function
|
|
of the ringbuffer to get a segsize samples from the peer element. These
|
|
samples will then be placed in the ringbuffer at the next play position.
|
|
It is assumed that the getrange function returns fast enough to fill the
|
|
ringbuffer before the play pointer reaches the write pointer.
|
|
|
|
In this mode, the ringbuffer is usually kept as empty as possible. There
|
|
is no context switch needed between the elements that create the samples
|
|
and the actual writing of the samples to the device.
|
|
|
|
|
|
DMA mode:
|
|
|
|
- Elements that can do DMA based access to the audio device have to subclass
|
|
from the GstBaseAudioSink class and wrap the DMA ringbuffer in a subclass
|
|
of GstRingBuffer.
|
|
|
|
The ringbuffer subclass should trigger a callback after writing or playing
|
|
each sample to the device. This callback can be triggered from a thread or
|
|
from a signal from the audio device.
|
|
|
|
|
|
Clocks:
|
|
|
|
The GstBaseAudioSink class will use the ringbuffer to act as a clock provider.
|
|
It can do this by using the play pointer and the delay to calculate the
|
|
clock time.
|
|
|
|
|
|
|