gstreamer/sys/rpicamsrc/RaspiCapture.c
Jan Schmidt cde8b33199 rpicamsrc: Initial caps nego and properties.
Support caps negotiation for H.264 frame size and framerate.

Add bitrate, saturation, brightness, contrast, sharpness properties.
2020-07-10 16:42:09 +01:00

1202 lines
35 KiB
C

/*
* Copyright (c) 2013 Jan Schmidt <jan@centricular.com>
Portions:
Copyright (c) 2013, Broadcom Europe Ltd
Copyright (c) 2013, James Hughes
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the copyright holder nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \file RaspiCapture.c
*
* Modification of the RaspiVid command line capture program for GStreamer
* use.
*
* \date 28th Feb 2013, 11 Oct 2013
* \Author: James Hughes, Jan Schmidt
*
* Description
*
* 3 components are created; camera, preview and video encoder.
* Camera component has three ports, preview, video and stills.
* This program connects preview and stills to the preview and video
* encoder. Using mmal we don't need to worry about buffers between these
* components, but we do need to handle buffers from the encoder, which
* are simply written straight to the file in the requisite buffer callback.
*
* We use the RaspiCamControl code to handle the specific camera settings.
* We use the RaspiPreview code to handle the (generic) preview window
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <memory.h>
#include <sysexits.h>
#include <gst/gst.h>
#include "bcm_host.h"
#include "interface/vcos/vcos.h"
#include "interface/mmal/mmal.h"
#include "interface/mmal/mmal_logging.h"
#include "interface/mmal/mmal_buffer.h"
#include "interface/mmal/util/mmal_util.h"
#include "interface/mmal/util/mmal_util_params.h"
#include "interface/mmal/util/mmal_default_components.h"
#include "interface/mmal/util/mmal_connection.h"
#include "RaspiCapture.h"
#include "RaspiCamControl.h"
#include "RaspiPreview.h"
#include <semaphore.h>
/// Camera number to use - we only have one camera, indexed from 0.
#define CAMERA_NUMBER 0
// Standard port setting for the camera component
#define MMAL_CAMERA_PREVIEW_PORT 0
#define MMAL_CAMERA_VIDEO_PORT 1
#define MMAL_CAMERA_CAPTURE_PORT 2
// Video format information
#define VIDEO_FRAME_RATE_NUM 30
#define VIDEO_FRAME_RATE_DEN 1
/// Video render needs at least 2 buffers.
#define VIDEO_OUTPUT_BUFFERS_NUM 3
// Max bitrate we allow for recording
const int MAX_BITRATE = 30000000; // 30Mbits/s
/// Interval at which we check for an failure abort during capture
const int ABORT_INTERVAL = 100; // ms
int mmal_status_to_int(MMAL_STATUS_T status);
/** Struct used to pass information in encoder port userdata to callback
*/
typedef struct
{
RASPIVID_STATE *state; /// pointer to our state in case required in callback
int abort; /// Set to 1 in callback if an error occurs to attempt to abort the capture
} PORT_USERDATA;
struct RASPIVID_STATE_T
{
RASPIVID_CONFIG *config;
FILE *output_file;
MMAL_COMPONENT_T *camera_component; /// Pointer to the camera component
MMAL_COMPONENT_T *encoder_component; /// Pointer to the encoder component
MMAL_CONNECTION_T *preview_connection; /// Pointer to the connection from camera to preview
MMAL_CONNECTION_T *encoder_connection; /// Pointer to the connection from camera to encoder
MMAL_PORT_T *camera_video_port;
MMAL_PORT_T *camera_still_port;
MMAL_PORT_T *encoder_output_port;
MMAL_POOL_T *encoder_pool; /// Pointer to the pool of buffers used by encoder output port
PORT_USERDATA callback_data;
MMAL_QUEUE_T *encoded_buffer_q;
};
#if 0
/// Structure to cross reference H264 profile strings against the MMAL parameter equivalent
static XREF_T profile_map[] =
{
{"baseline", MMAL_VIDEO_PROFILE_H264_BASELINE},
{"main", MMAL_VIDEO_PROFILE_H264_MAIN},
{"high", MMAL_VIDEO_PROFILE_H264_HIGH},
// {"constrained", MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE} // Does anyone need this?
};
static int profile_map_size = sizeof(profile_map) / sizeof(profile_map[0]);
static void display_valid_parameters(char *app_name);
/// Command ID's and Structure defining our command line options
#define CommandHelp 0
#define CommandWidth 1
#define CommandHeight 2
#define CommandBitrate 3
#define CommandOutput 4
#define CommandVerbose 5
#define CommandTimeout 6
#define CommandDemoMode 7
#define CommandFramerate 8
#define CommandPreviewEnc 9
#define CommandIntraPeriod 10
#define CommandProfile 11
static COMMAND_LIST cmdline_commands[] =
{
{ CommandHelp, "-help", "?", "This help information", 0 },
{ CommandWidth, "-width", "w", "Set image width <size>. Default 1920", 1 },
{ CommandHeight, "-height", "h", "Set image height <size>. Default 1080", 1 },
{ CommandBitrate, "-bitrate", "b", "Set bitrate. Use bits per second (e.g. 10MBits/s would be -b 10000000)", 1 },
{ CommandVerbose, "-verbose", "v", "Output verbose information during run", 0 },
{ CommandTimeout, "-timeout", "t", "Time (in ms) to capture for. If not specified, set to 5s. Zero to disable", 1 },
{ CommandDemoMode,"-demo", "d", "Run a demo mode (cycle through range of camera options, no capture)", 1},
{ CommandFramerate,"-framerate", "fps","Specify the frames per second to record", 1},
{ CommandPreviewEnc,"-penc", "e", "Display preview image *after* encoding (shows compression artifacts)", 0},
{ CommandIntraPeriod,"-intra", "g", "Specify the intra refresh period (key frame rate/GoP size)", 1},
{ CommandProfile, "-profile", "pf", "Specify H264 profile to use for encoding", 1},
};
static int cmdline_commands_size = sizeof(cmdline_commands) / sizeof(cmdline_commands[0]);
#endif
static void dump_state(RASPIVID_STATE *state);
/**
* Assign a default set of parameters to the state passed in
*
* @param state Pointer to state structure to assign defaults to
*/
void raspicapture_default_config(RASPIVID_CONFIG *config)
{
// Now set anything non-zero
config->timeout = 5000; // 5s delay before take image
config->width = 1920; // Default to 1080p
config->height = 1080;
config->bitrate = 17000000; // This is a decent default bitrate for 1080p
config->fps_n = VIDEO_FRAME_RATE_NUM;
config->fps_d = VIDEO_FRAME_RATE_DEN;
config->intraperiod = 0; // Not set
config->demoMode = 0;
config->demoInterval = 250; // ms
config->immutableInput = 1;
config->profile = MMAL_VIDEO_PROFILE_H264_HIGH;
// Setup preview window defaults
raspipreview_set_defaults(&config->preview_parameters);
// Set up the camera_parameters to default
raspicamcontrol_set_defaults(&config->camera_parameters);
}
/**
* Dump image state parameters to printf. Used for debugging
*
* @param state Pointer to state structure to assign defaults to
*/
static void dump_state(RASPIVID_STATE *state)
{
if (!state)
{
vcos_assert(0);
return;
}
fprintf(stderr, "Width %d, Height %d\n", state->config->width, state->config->height);
fprintf(stderr, "bitrate %d, framerate %d/%d, time delay %d\n", state->config->bitrate, state->config->fps_n, state->config->fps_d, state->config->timeout);
//fprintf(stderr, "H264 Profile %s\n", raspicli_unmap_xref(state->config->profile, profile_map, profile_map_size));
raspipreview_dump_parameters(&state->config->preview_parameters);
raspicamcontrol_dump_parameters(&state->config->camera_parameters);
}
#if 0
/**
* Parse the incoming command line and put resulting parameters in to the state
*
* @param argc Number of arguments in command line
* @param argv Array of pointers to strings from command line
* @param state Pointer to state structure to assign any discovered parameters to
* @return Non-0 if failed for some reason, 0 otherwise
*/
static int parse_cmdline(int argc, const char **argv, RASPIVID_STATE *state)
{
// Parse the command line arguments.
// We are looking for --<something> or -<abreviation of something>
int valid = 1;
int i;
for (i = 1; i < argc && valid; i++)
{
int command_id, num_parameters;
if (!argv[i])
continue;
if (argv[i][0] != '-')
{
valid = 0;
continue;
}
// Assume parameter is valid until proven otherwise
valid = 1;
command_id = raspicli_get_command_id(cmdline_commands, cmdline_commands_size, &argv[i][1], &num_parameters);
// If we found a command but are missing a parameter, continue (and we will drop out of the loop)
if (command_id != -1 && num_parameters > 0 && (i + 1 >= argc) )
continue;
// We are now dealing with a command line option
switch (command_id)
{
case CommandHelp:
display_valid_parameters(basename(argv[0]));
return -1;
case CommandWidth: // Width > 0
if (sscanf(argv[i + 1], "%u", &state->width) != 1)
valid = 0;
else
i++;
break;
case CommandHeight: // Height > 0
if (sscanf(argv[i + 1], "%u", &state->height) != 1)
valid = 0;
else
i++;
break;
case CommandBitrate: // 1-100
if (sscanf(argv[i + 1], "%u", &state->bitrate) == 1)
{
if (state->bitrate > MAX_BITRATE)
{
state->bitrate = MAX_BITRATE;
}
i++;
}
else
valid = 0;
break;
case CommandOutput: // output filename
{
int len = strlen(argv[i + 1]);
if (len)
{
state->filename = malloc(len + 1);
vcos_assert(state->filename);
if (state->filename)
strncpy(state->filename, argv[i + 1], len);
i++;
}
else
valid = 0;
break;
}
case CommandVerbose: // display lots of data during run
state->verbose = 1;
break;
case CommandTimeout: // Time to run viewfinder/capture
{
if (sscanf(argv[i + 1], "%u", &state->timeout) == 1)
{
// TODO : What limits do we need for timeout?
i++;
}
else
valid = 0;
break;
}
case CommandDemoMode: // Run in demo mode - no capture
{
// Demo mode might have a timing parameter
// so check if a) we have another parameter, b) its not the start of the next option
if (i + 1 < argc && argv[i+1][0] != '-')
{
if (sscanf(argv[i + 1], "%u", &state->demoInterval) == 1)
{
// TODO : What limits do we need for timeout?
if (state->demoInterval == 0)
state->demoInterval = 250; // ms
state->demoMode = 1;
i++;
}
else
valid = 0;
}
else
{
state->demoMode = 1;
}
break;
}
case CommandFramerate: // fps to record
{
if (sscanf(argv[i + 1], "%u", &state->framerate) == 1)
{
// TODO : What limits do we need for fps 1 - 30 - 120??
i++;
}
else
valid = 0;
break;
}
case CommandPreviewEnc:
state->immutableInput = 0;
break;
case CommandIntraPeriod: // key frame rate
{
if (sscanf(argv[i + 1], "%u", &state->intraperiod) == 1)
i++;
else
valid = 0;
break;
}
case CommandProfile: // H264 profile
{
state->profile = raspicli_map_xref(argv[i + 1], profile_map, profile_map_size);
if( state->profile == -1)
state->profile = MMAL_VIDEO_PROFILE_H264_HIGH;
i++;
break;
}
default:
{
// Try parsing for any image specific parameters
// result indicates how many parameters were used up, 0,1,2
// but we adjust by -1 as we have used one already
const char *second_arg = (i + 1 < argc) ? argv[i + 1] : NULL;
int parms_used = (raspicamcontrol_parse_cmdline(&state->camera_parameters, &argv[i][1], second_arg));
// Still unused, try preview options
if (!parms_used)
parms_used = raspipreview_parse_cmdline(&state->preview_parameters, &argv[i][1], second_arg);
// If no parms were used, this must be a bad parameters
if (!parms_used)
valid = 0;
else
i += parms_used - 1;
break;
}
}
}
if (!valid)
{
fprintf(stderr, "Invalid command line option (%s)\n", argv[i]);
return 1;
}
return 0;
}
/**
* Display usage information for the application to stdout
*
* @param app_name String to display as the application name
*/
static void display_valid_parameters(char *app_name)
{
int i;
fprintf(stderr, "Display camera output to display, and optionally saves an H264 capture at requested bitrate\n\n");
fprintf(stderr, "\nusage: %s [options]\n\n", app_name);
fprintf(stderr, "Image parameter commands\n\n");
raspicli_display_help(cmdline_commands, cmdline_commands_size);
// Profile options
fprintf(stderr, "\n\nH264 Profile options :\n%s", profile_map[0].mode );
for (i=1;i<profile_map_size;i++)
{
fprintf(stderr, ",%s", profile_map[i].mode);
}
// Help for preview options
raspipreview_display_help();
// Now display any help information from the camcontrol code
raspicamcontrol_display_help();
fprintf(stderr, "\n");
return;
}
#endif
/**
* buffer header callback function for camera control
*
* Callback will dump buffer data to the specific file
*
* @param port Pointer to port from which callback originated
* @param buffer mmal buffer header pointer
*/
static void camera_control_callback(MMAL_PORT_T *port, MMAL_BUFFER_HEADER_T *buffer)
{
if (buffer->cmd == MMAL_EVENT_PARAMETER_CHANGED)
{
}
else
{
vcos_log_error("Received unexpected camera control callback event, 0x%08x", buffer->cmd);
}
mmal_buffer_header_release(buffer);
}
/**
* buffer header callback function for encoder
*
* Callback will dump buffer data to the specific file
*
* @param port Pointer to port from which callback originated
* @param buffer mmal buffer header pointer
*/
static void encoder_buffer_callback(MMAL_PORT_T *port, MMAL_BUFFER_HEADER_T *buffer)
{
PORT_USERDATA *pData = (PORT_USERDATA *)port->userdata;
RASPIVID_STATE *state = pData->state;
if (pData == NULL)
{
vcos_log_error("Received a encoder buffer callback with no state");
// release buffer back to the pool
mmal_buffer_header_release(buffer);
return;
}
/* Send buffer to GStreamer element for pushing to the pipeline */
mmal_queue_put(state->encoded_buffer_q, buffer);
}
GstFlowReturn
raspi_capture_fill_buffer(RASPIVID_STATE *state, GstBuffer **bufp)
{
GstBuffer *buf;
MMAL_BUFFER_HEADER_T *buffer;
GstFlowReturn ret = GST_FLOW_ERROR;
/* FIXME: Use our own interruptible cond wait: */
buffer = mmal_queue_wait(state->encoded_buffer_q);
mmal_buffer_header_mem_lock(buffer);
buf = gst_buffer_new_allocate(NULL, buffer->length, NULL);
if (buf) {
gst_buffer_fill(buf, 0, buffer->data, buffer->length);
ret = GST_FLOW_OK;
}
mmal_buffer_header_mem_unlock(buffer);
*bufp = buf;
// release buffer back to the pool
mmal_buffer_header_release(buffer);
// and send one back to the port (if still open)
if (state->encoder_output_port->is_enabled)
{
MMAL_STATUS_T status = MMAL_SUCCESS;
buffer = mmal_queue_get(state->encoder_pool->queue);
if (buffer)
status = mmal_port_send_buffer(state->encoder_output_port, buffer);
if (!buffer || status != MMAL_SUCCESS) {
vcos_log_error("Unable to return a buffer to the encoder port");
ret = GST_FLOW_ERROR;
}
}
return ret;
}
/**
* Create the camera component, set up its ports
*
* @param state Pointer to state control struct
*
* @return MMAL_SUCCESS if all OK, something else otherwise
*
*/
static MMAL_STATUS_T create_camera_component(RASPIVID_STATE *state)
{
MMAL_COMPONENT_T *camera = NULL;
MMAL_STATUS_T status;
/* Create the component */
status = mmal_component_create(MMAL_COMPONENT_DEFAULT_CAMERA, &camera);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Failed to create camera component");
goto error;
}
if (!camera->output_num)
{
status = MMAL_ENOSYS;
vcos_log_error("Camera doesn't have output ports");
goto error;
}
// Enable the camera, and tell it its control callback function
status = mmal_port_enable(camera->control, camera_control_callback);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Unable to enable control port : error %d", status);
goto error;
}
state->camera_component = camera;
return status;
error:
if (camera)
mmal_component_destroy(camera);
return status;
}
MMAL_STATUS_T
raspi_capture_set_format_and_start(RASPIVID_STATE *state)
{
MMAL_COMPONENT_T *camera = NULL;
MMAL_STATUS_T status;
MMAL_ES_FORMAT_T *format;
MMAL_PORT_T *preview_port = NULL, *video_port = NULL, *still_port = NULL;
// set up the camera configuration
MMAL_PARAMETER_CAMERA_CONFIG_T cam_config =
{
{ MMAL_PARAMETER_CAMERA_CONFIG, sizeof(cam_config) },
.max_stills_w = state->config->width,
.max_stills_h = state->config->height,
.stills_yuv422 = 0,
.one_shot_stills = 0,
.max_preview_video_w = state->config->width,
.max_preview_video_h = state->config->height,
.num_preview_video_frames = 3,
.stills_capture_circular_buffer_height = 0,
.fast_preview_resume = 0,
.use_stc_timestamp = MMAL_PARAM_TIMESTAMP_MODE_RESET_STC
};
camera = state->camera_component;
preview_port = camera->output[MMAL_CAMERA_PREVIEW_PORT];
video_port = camera->output[MMAL_CAMERA_VIDEO_PORT];
still_port = camera->output[MMAL_CAMERA_CAPTURE_PORT];
mmal_port_parameter_set(camera->control, &cam_config.hdr);
// Now set up the port formats
// Set the encode format on the Preview port
// HW limitations mean we need the preview to be the same size as the required recorded output
format = preview_port->format;
format->encoding = MMAL_ENCODING_OPAQUE;
format->encoding_variant = MMAL_ENCODING_I420;
format->encoding = MMAL_ENCODING_OPAQUE;
format->es->video.width = state->config->width;
format->es->video.height = state->config->height;
format->es->video.crop.x = 0;
format->es->video.crop.y = 0;
format->es->video.crop.width = state->config->width;
format->es->video.crop.height = state->config->height;
format->es->video.frame_rate.num = state->config->fps_n;
format->es->video.frame_rate.den = state->config->fps_d;
status = mmal_port_format_commit(preview_port);
if (status != MMAL_SUCCESS)
{
vcos_log_error("camera viewfinder format couldn't be set");
goto error;
}
// Set the encode format on the video port
format = video_port->format;
format->encoding_variant = MMAL_ENCODING_I420;
format->encoding = MMAL_ENCODING_OPAQUE;
format->es->video.width = state->config->width;
format->es->video.height = state->config->height;
format->es->video.crop.x = 0;
format->es->video.crop.y = 0;
format->es->video.crop.width = state->config->width;
format->es->video.crop.height = state->config->height;
format->es->video.frame_rate.num = state->config->fps_n;
format->es->video.frame_rate.den = state->config->fps_d;
status = mmal_port_format_commit(video_port);
if (status != MMAL_SUCCESS)
{
vcos_log_error("camera video format couldn't be set");
goto error;
}
// Ensure there are enough buffers to avoid dropping frames
if (video_port->buffer_num < VIDEO_OUTPUT_BUFFERS_NUM)
video_port->buffer_num = VIDEO_OUTPUT_BUFFERS_NUM;
// Set the encode format on the still port
format = still_port->format;
format->encoding = MMAL_ENCODING_OPAQUE;
format->encoding_variant = MMAL_ENCODING_I420;
format->es->video.width = state->config->width;
format->es->video.height = state->config->height;
format->es->video.crop.x = 0;
format->es->video.crop.y = 0;
format->es->video.crop.width = state->config->width;
format->es->video.crop.height = state->config->height;
format->es->video.frame_rate.num = 1;
format->es->video.frame_rate.den = 1;
status = mmal_port_format_commit(still_port);
if (status != MMAL_SUCCESS)
{
vcos_log_error("camera still format couldn't be set");
goto error;
}
/* Ensure there are enough buffers to avoid dropping frames */
if (still_port->buffer_num < VIDEO_OUTPUT_BUFFERS_NUM)
still_port->buffer_num = VIDEO_OUTPUT_BUFFERS_NUM;
/* Enable component */
status = mmal_component_enable(camera);
if (status != MMAL_SUCCESS)
{
vcos_log_error("camera component couldn't be enabled");
goto error;
}
raspicamcontrol_set_all_parameters(camera, &state->config->camera_parameters);
if (state->config->verbose)
fprintf(stderr, "Camera component done\n");
error:
return status;
}
/**
* Destroy the camera component
*
* @param state Pointer to state control struct
*
*/
static void destroy_camera_component(RASPIVID_STATE *state)
{
if (state->camera_component)
{
mmal_component_destroy(state->camera_component);
state->camera_component = NULL;
}
}
/**
* Create the encoder component, set up its ports
*
* @param state Pointer to state control struct
*
* @return MMAL_SUCCESS if all OK, something else otherwise
*
*/
static MMAL_STATUS_T create_encoder_component(RASPIVID_STATE *state)
{
MMAL_COMPONENT_T *encoder = 0;
MMAL_PORT_T *encoder_input = NULL, *encoder_output = NULL;
MMAL_STATUS_T status;
MMAL_POOL_T *pool;
status = mmal_component_create(MMAL_COMPONENT_DEFAULT_VIDEO_ENCODER, &encoder);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Unable to create video encoder component");
goto error;
}
if (!encoder->input_num || !encoder->output_num)
{
status = MMAL_ENOSYS;
vcos_log_error("Video encoder doesn't have input/output ports");
goto error;
}
encoder_input = encoder->input[0];
encoder_output = encoder->output[0];
// We want same format on input and output
mmal_format_copy(encoder_output->format, encoder_input->format);
// Only supporting H264 at the moment
encoder_output->format->encoding = MMAL_ENCODING_H264;
encoder_output->format->bitrate = state->config->bitrate;
encoder_output->buffer_size = encoder_output->buffer_size_recommended;
if (encoder_output->buffer_size < encoder_output->buffer_size_min)
encoder_output->buffer_size = encoder_output->buffer_size_min;
g_print("encoder buffer size is %u\n", (guint)encoder_output->buffer_size);
encoder_output->buffer_num = encoder_output->buffer_num_recommended;
if (encoder_output->buffer_num < encoder_output->buffer_num_min)
encoder_output->buffer_num = encoder_output->buffer_num_min;
// Commit the port changes to the output port
status = mmal_port_format_commit(encoder_output);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Unable to set format on video encoder output port");
goto error;
}
// Set the rate control parameter
if (0)
{
MMAL_PARAMETER_VIDEO_RATECONTROL_T param = {{ MMAL_PARAMETER_RATECONTROL, sizeof(param)}, MMAL_VIDEO_RATECONTROL_DEFAULT};
status = mmal_port_parameter_set(encoder_output, &param.hdr);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Unable to set ratecontrol");
goto error;
}
}
if (state->config->intraperiod)
{
MMAL_PARAMETER_UINT32_T param = {{ MMAL_PARAMETER_INTRAPERIOD, sizeof(param)}, state->config->intraperiod};
status = mmal_port_parameter_set(encoder_output, &param.hdr);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Unable to set intraperiod");
goto error;
}
}
{
MMAL_PARAMETER_VIDEO_PROFILE_T param;
param.hdr.id = MMAL_PARAMETER_PROFILE;
param.hdr.size = sizeof(param);
param.profile[0].profile = state->config->profile;
param.profile[0].level = MMAL_VIDEO_LEVEL_H264_4; // This is the only value supported
status = mmal_port_parameter_set(encoder_output, &param.hdr);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Unable to set H264 profile");
goto error;
}
}
if (mmal_port_parameter_set_boolean(encoder_input, MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, state->config->immutableInput) != MMAL_SUCCESS)
{
vcos_log_error("Unable to set immutable input flag");
// Continue rather than abort..
}
// Enable component
status = mmal_component_enable(encoder);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Unable to enable video encoder component");
goto error;
}
/* Create pool of buffer headers for the output port to consume */
pool = mmal_port_pool_create(encoder_output, encoder_output->buffer_num, encoder_output->buffer_size);
if (!pool)
{
vcos_log_error("Failed to create buffer header pool for encoder output port %s", encoder_output->name);
}
state->encoder_pool = pool;
state->encoder_component = encoder;
if (state->config->verbose)
fprintf(stderr, "Encoder component done\n");
return status;
error:
if (encoder)
mmal_component_destroy(encoder);
return status;
}
/**
* Destroy the encoder component
*
* @param state Pointer to state control struct
*
*/
static void destroy_encoder_component(RASPIVID_STATE *state)
{
/* Empty the buffer header q */
while (mmal_queue_length(state->encoded_buffer_q)) {
MMAL_BUFFER_HEADER_T *buffer = mmal_queue_get(state->encoded_buffer_q);
mmal_buffer_header_release(buffer);
}
mmal_queue_destroy(state->encoded_buffer_q);
// Get rid of any port buffers first
if (state->encoder_pool)
{
mmal_port_pool_destroy(state->encoder_component->output[0], state->encoder_pool);
}
if (state->encoder_component)
{
mmal_component_destroy(state->encoder_component);
state->encoder_component = NULL;
}
}
/**
* Connect two specific ports together
*
* @param output_port Pointer the output port
* @param input_port Pointer the input port
* @param Pointer to a mmal connection pointer, reassigned if function successful
* @return Returns a MMAL_STATUS_T giving result of operation
*
*/
static MMAL_STATUS_T connect_ports(MMAL_PORT_T *output_port, MMAL_PORT_T *input_port, MMAL_CONNECTION_T **connection)
{
MMAL_STATUS_T status;
status = mmal_connection_create(connection, output_port, input_port, MMAL_CONNECTION_FLAG_TUNNELLING | MMAL_CONNECTION_FLAG_ALLOCATION_ON_INPUT);
if (status == MMAL_SUCCESS)
{
status = mmal_connection_enable(*connection);
if (status != MMAL_SUCCESS)
mmal_connection_destroy(*connection);
}
return status;
}
/**
* Checks if specified port is valid and enabled, then disables it
*
* @param port Pointer the port
*
*/
static void check_disable_port(MMAL_PORT_T *port)
{
if (port && port->is_enabled)
mmal_port_disable(port);
}
void raspicapture_init()
{
bcm_host_init();
// Register our application with the logging system
vcos_log_register("RaspiVid", VCOS_LOG_CATEGORY);
}
RASPIVID_STATE *
raspi_capture_setup(RASPIVID_CONFIG *config)
{
// Our main data storage vessel..
RASPIVID_STATE *state;
MMAL_STATUS_T status = MMAL_SUCCESS;
/* Default everything to zero */
state = calloc(1, sizeof(RASPIVID_STATE));
/* Apply passed in config */
state->config = config;
/* So far, all we can do is create the camera component. Actual
* config and connection of encoders etc happens in _start()
*/
// OK, we have a nice set of parameters. Now set up our components
// We have three components. Camera, Preview and encoder.
if ((status = create_camera_component(state)) != MMAL_SUCCESS)
{
vcos_log_error("%s: Failed to create camera component", __func__);
return NULL;
}
if ((status = raspipreview_create(&state->config->preview_parameters)) != MMAL_SUCCESS)
{
vcos_log_error("%s: Failed to create preview component", __func__);
destroy_camera_component(state);
return NULL;
}
if ((status = create_encoder_component(state)) != MMAL_SUCCESS)
{
vcos_log_error("%s: Failed to create encode component", __func__);
raspipreview_destroy(&state->config->preview_parameters);
destroy_camera_component(state);
return NULL;
}
state->encoded_buffer_q = mmal_queue_create();
return state;
}
gboolean
raspi_capture_start(RASPIVID_STATE *state)
{
MMAL_STATUS_T status = MMAL_SUCCESS;
MMAL_PORT_T *camera_preview_port = NULL;
MMAL_PORT_T *preview_input_port = NULL;
MMAL_PORT_T *encoder_input_port = NULL;
if (state->config->verbose)
{
dump_state(state);
}
if ((status = raspi_capture_set_format_and_start(state)) != MMAL_SUCCESS) {
return FALSE;
}
if (state->config->verbose)
fprintf(stderr, "Starting component connection stage\n");
camera_preview_port = state->camera_component->output[MMAL_CAMERA_PREVIEW_PORT];
preview_input_port = state->config->preview_parameters.preview_component->input[0];
encoder_input_port = state->encoder_component->input[0];
state->camera_video_port = state->camera_component->output[MMAL_CAMERA_VIDEO_PORT];
state->camera_still_port = state->camera_component->output[MMAL_CAMERA_CAPTURE_PORT];
state->encoder_output_port = state->encoder_component->output[0];
if (state->config->preview_parameters.wantPreview )
{
if (state->config->verbose)
{
fprintf(stderr, "Connecting camera preview port to preview input port\n");
fprintf(stderr, "Starting video preview\n");
}
// Connect camera to preview
status = connect_ports(camera_preview_port, preview_input_port, &state->preview_connection);
if (status != MMAL_SUCCESS)
{
vcos_log_error("%s: Failed to connect camera to preview", __func__);
return FALSE;
}
}
if (state->config->verbose)
fprintf(stderr, "Connecting camera stills port to encoder input port\n");
// Now connect the camera to the encoder
status = connect_ports(state->camera_video_port, encoder_input_port, &state->encoder_connection);
if (status != MMAL_SUCCESS)
{
if (state->config->preview_parameters.wantPreview )
mmal_connection_destroy(state->preview_connection);
vcos_log_error("%s: Failed to connect camera video port to encoder input", __func__);
return FALSE;
}
// Set up our userdata - this is passed though to the callback where we need the information.
state->callback_data.state = state;
state->callback_data.abort = 0;
state->encoder_output_port->userdata = (struct MMAL_PORT_USERDATA_T *)&state->callback_data;
if (state->config->verbose)
fprintf(stderr, "Enabling encoder output port\n");
// Enable the encoder output port and tell it its callback function
status = mmal_port_enable(state->encoder_output_port, encoder_buffer_callback);
if (status != MMAL_SUCCESS)
{
vcos_log_error("Failed to setup encoder output");
goto error;
}
if (state->config->demoMode)
{
// Run for the user specific time..
int num_iterations = state->config->timeout / state->config->demoInterval;
int i;
if (state->config->verbose)
fprintf(stderr, "Running in demo mode\n");
for (i=0;state->config->timeout == 0 || i<num_iterations;i++)
{
raspicamcontrol_cycle_test(state->camera_component);
vcos_sleep(state->config->demoInterval);
}
}
if (state->config->verbose)
fprintf(stderr, "Starting video capture\n");
if (mmal_port_parameter_set_boolean(state->camera_video_port, MMAL_PARAMETER_CAPTURE, 1) != MMAL_SUCCESS)
{
goto error;
}
// Send all the buffers to the encoder output port
{
int num = mmal_queue_length(state->encoder_pool->queue);
int q;
for (q=0;q<num;q++)
{
MMAL_BUFFER_HEADER_T *buffer = mmal_queue_get(state->encoder_pool->queue);
if (!buffer)
vcos_log_error("Unable to get a required buffer %d from pool queue", q);
if (mmal_port_send_buffer(state->encoder_output_port, buffer)!= MMAL_SUCCESS)
vcos_log_error("Unable to send a buffer to encoder output port (%d)", q);
}
}
// Now wait until we need to stop. Whilst waiting we do need to check to see if we have aborted (for example
// out of storage space)
// Going to check every ABORT_INTERVAL milliseconds
#if 0
for (wait = 0; state->config->timeout == 0 || wait < state->config->timeout; wait+= ABORT_INTERVAL)
{
vcos_sleep(ABORT_INTERVAL);
if (state->callback_data.abort)
break;
}
if (state->config->verbose)
fprintf(stderr, "Finished capture\n");
#endif
return (status == MMAL_SUCCESS);
error:
raspi_capture_stop(state);
if (status != MMAL_SUCCESS) {
mmal_status_to_int(status);
raspicamcontrol_check_configuration(128);
}
return FALSE;
}
void
raspi_capture_stop(RASPIVID_STATE *state)
{
if (state->config->verbose)
fprintf(stderr, "Closing down\n");
if (state->config->preview_parameters.wantPreview )
mmal_connection_destroy(state->preview_connection);
mmal_connection_destroy(state->encoder_connection);
// Disable all our ports that are not handled by connections
check_disable_port(state->camera_still_port);
check_disable_port(state->encoder_output_port);
}
void
raspi_capture_free(RASPIVID_STATE *state)
{
// Can now close our file. Note disabling ports may flush buffers which causes
// problems if we have already closed the file!
if (state->output_file && state->output_file != stdout)
fclose(state->output_file);
/* Disable components */
if (state->encoder_component)
mmal_component_disable(state->encoder_component);
if (state->config->preview_parameters.preview_component)
mmal_component_disable(state->config->preview_parameters.preview_component);
if (state->camera_component)
mmal_component_disable(state->camera_component);
destroy_encoder_component(state);
raspipreview_destroy(&state->config->preview_parameters);
destroy_camera_component(state);
if (state->config->verbose)
fprintf(stderr, "Close down completed, all components disconnected, disabled and destroyed\n\n");
free(state);
}