mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-12-26 02:00:33 +00:00
Code Issues 1 Projects Releases Wiki Activity
gstreamer/ext/curl/gstcurlsmtpsink.c
Sebastian Rasmussen c7e4217121 curlsmtpsink: Lock and don't send final boundary upon error 
Previously GstCurlSmtpSink could cause the pipeline thread to end up
waiting for a stopped thread to perform work.

The scenario was that the sink could be rendering a buffer and waiting
for the curl transfer thread to have sent the data. As soon as the
transfer thread has copied all data to curl's data buffer in
gst_curl_base_sink_transfer_read_cb() then the render call would stop
waiting and return GST_FLOW_OK. While this takes place the transfer
thread may suffer from an error e.g. due gst_poll_wait() timing out.
This causes the transfer thread to record the error, claim (it is not
really true since there was an error) that the data has been sent and
that a response has been received by trying to signal the pipeline
thread (but this has already stopped waiting). Finally the transfer
thread stops itself. A short while later the pipeline thread may attempt
to push an EOS event into GstCurlSmtpSink. Since there is no check in
gst_curl_smtp_sink_event() to check if the sink has suffered from any
error it may attempt to add a final boundary and ask the, now deceased,
transfer thread to transfer the new data. Next the sink element would
have waited for the transfer to complete (using a different mechanism
than normal transfers through GstCurlBaseSink). In this case there was
an error check to avoid waiting if an error had already been seen.
Finally GstCurlSmtpSink would chain up to GstCurlBaseSink which would
then block waiting for a response (normally this would be prevented by
the transfer thread suffering the error claiming that it had been
received, but GstCurlSmtpSink clobbered this flag after the fact).

Now GstCurlSmtpSink avoids this by locking over the entire event handing
(preventing simultaneous changes to flags by the two threads) and also
by avoiding to initiate transfer of final boundary if an error has
already been seen.

Also add GST_FIXME() for remaining similar issue where the pipeline
thread may block indefinitely waiting for transfer thread to transfer
data but the transfer thread errors out and fails to notify the pipeline
thread that the transfer failed.

https://bugzilla.gnome.org/show_bug.cgi?id=767501
2016-06-11 11:25:13 +01:00

1020 lines
31 KiB
C
Raw Blame History

/* GStreamer
* Copyright (C) 2011 Axis Communications <dev-gstreamer@axis.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
/**
* SECTION:element-curlsink
* @short_description: sink that uploads data to a server using libcurl
* @see_also:
*
* This is a network sink that uses libcurl as a client to upload data to
* an SMTP server.
*
* <refsect2>
* <title>Example launch line (upload a JPEG file to an SMTP server)</title>
* |[
* gst-launch-1.0 filesrc location=image.jpg ! jpegparse ! curlsmtpsink \
* file-name=image.jpg \
* location=smtp://smtp.gmail.com:507 \
* user=test passwd=test \
* subject=my image \
* mail-from="me@gmail.com" \
* mail-rcpt="you@gmail.com,she@gmail.com" \
* use-ssl=TRUE \
* insecure=TRUE
* ]|
* </refsect2>
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <curl/curl.h>
#include <string.h>
#include <stdio.h>
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#include <sys/types.h>
#include <sys/time.h>
#if HAVE_PWD_H
#include <pwd.h>
#endif
#if HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#include <unistd.h>
#if HAVE_NETINET_IP_H
#include <netinet/ip.h>
#endif
#if HAVE_NETINET_TCP_H
#include <netinet/tcp.h>
#endif
#include <sys/stat.h>
#include <fcntl.h>
#include "gstcurltlssink.h"
#include "gstcurlsmtpsink.h"
/* Default values */
#define GST_CAT_DEFAULT gst_curl_smtp_sink_debug
#define DEFAULT_USE_SSL FALSE
#define DEFAULT_NBR_ATTACHMENTS 1
/* MIME definitions */
#define MIME_VERSION "MIME-version: 1.0"
#define BOUNDARY_STRING "curlsink-boundary"
#define BOUNDARY_STRING_END "--curlsink-boundary--"
#define MAIL_RCPT_DELIMITER ","
/* Plugin specific settings */
GST_DEBUG_CATEGORY_STATIC (gst_curl_smtp_sink_debug);
enum
{
PROP_0,
PROP_MAIL_RCPT,
PROP_MAIL_FROM,
PROP_SUBJECT,
PROP_MESSAGE_BODY,
PROP_POP_USER_NAME,
PROP_POP_USER_PASSWD,
PROP_POP_LOCATION,
PROP_NBR_ATTACHMENTS,
PROP_CONTENT_TYPE,
PROP_USE_SSL
};
/* Object class function declarations */
static void gst_curl_smtp_sink_finalize (GObject * gobject);
static void gst_curl_smtp_sink_set_property (GObject * object, guint prop_id,
const GValue * value, GParamSpec * pspec);
static void gst_curl_smtp_sink_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec);
static gboolean gst_curl_smtp_sink_set_payload_headers_unlocked (GstCurlBaseSink
* sink);
static gboolean
gst_curl_smtp_sink_set_transfer_options_unlocked (GstCurlBaseSink * sink);
static void gst_curl_smtp_sink_set_mime_type (GstCurlBaseSink * bcsink,
GstCaps * caps);
static gboolean gst_curl_smtp_sink_prepare_transfer (GstCurlBaseSink * bcsink);
static size_t gst_curl_smtp_sink_transfer_data_buffer (GstCurlBaseSink * sink,
void *curl_ptr, size_t block_size, guint * last_chunk);
static size_t gst_curl_smtp_sink_flush_data_unlocked (GstCurlBaseSink * bcsink,
void *curl_ptr, size_t block_size, gboolean new_file,
gboolean close_transfer);
/* private functions */
static size_t transfer_payload_headers (GstCurlSmtpSink * sink, void *curl_ptr,
size_t block_size);
#define gst_curl_smtp_sink_parent_class parent_class
G_DEFINE_TYPE (GstCurlSmtpSink, gst_curl_smtp_sink, GST_TYPE_CURL_TLS_SINK);
static void
gst_curl_smtp_sink_notify_transfer_end_unlocked (GstCurlSmtpSink * sink)
{
GST_LOG ("transfer completed: %d", sink->transfer_end);
sink->transfer_end = TRUE;
g_cond_signal (&sink->cond_transfer_end);
}
static void
gst_curl_smtp_sink_wait_for_transfer_end_unlocked (GstCurlSmtpSink * sink)
{
GST_LOG ("waiting for final data do be sent: %d", sink->transfer_end);
while (!sink->transfer_end) {
g_cond_wait (&sink->cond_transfer_end, GST_OBJECT_GET_LOCK (sink));
}
GST_LOG ("final data sent");
}
static void
add_final_boundary_unlocked (GstCurlSmtpSink * sink)
{
GByteArray *array;
gchar *boundary_end;
gsize len;
gint save, state;
gchar *data_out;
GST_DEBUG ("adding final boundary");
array = sink->base64_chunk->chunk_array;
g_assert (array);
/* it will need up to 5 bytes if line-breaking is enabled
* additional byte is needed for <CR> as it is not automatically added by
* glib */
data_out = g_malloc (6);
save = sink->base64_chunk->save;
state = sink->base64_chunk->state;
len = g_base64_encode_close (TRUE, data_out, &state, &save);
/* workaround */
data_out[len - 1] = '\r';
data_out[len] = '\n';
/* +1 for CR */
g_byte_array_append (array, (guint8 *) data_out, (guint) (len + 1));
g_free (data_out);
boundary_end = g_strdup_printf ("\r\n%s\r\n", BOUNDARY_STRING_END);
g_byte_array_append (array, (guint8 *) boundary_end, strlen (boundary_end));
g_free (boundary_end);
sink->final_boundary_added = TRUE;
}
static gboolean
gst_curl_smtp_sink_event (GstBaseSink * bsink, GstEvent * event)
{
GstCurlBaseSink *bcsink = GST_CURL_BASE_SINK (bsink);
GstCurlSmtpSink *sink = GST_CURL_SMTP_SINK (bsink);
switch (event->type) {
case GST_EVENT_EOS:
GST_DEBUG_OBJECT (sink, "received EOS");
gst_curl_base_sink_set_live (bcsink, FALSE);
GST_OBJECT_LOCK (sink);
sink->eos = TRUE;
if (bcsink->flow_ret == GST_FLOW_OK && sink->base64_chunk != NULL
&& !sink->final_boundary_added) {
add_final_boundary_unlocked (sink);
gst_curl_base_sink_transfer_thread_notify_unlocked (bcsink);
GST_FIXME_OBJECT (sink, "if gstpoll errors in transfer thread, then "
"this wait will never timeout because the transfer thread does "
"not signal it upon errors");
gst_curl_smtp_sink_wait_for_transfer_end_unlocked (sink);
}
GST_OBJECT_UNLOCK (sink);
break;
default:
break;
}
return GST_BASE_SINK_CLASS (parent_class)->event (bsink, event);
}
static gboolean
gst_curl_smtp_sink_has_buffered_data_unlocked (GstCurlBaseSink * bcsink)
{
GstCurlSmtpSink *sink = GST_CURL_SMTP_SINK (bcsink);
Base64Chunk *chunk;
GByteArray *array = NULL;
gboolean ret = FALSE;
chunk = sink->base64_chunk;
if (chunk) {
array = chunk->chunk_array;
if (array)
ret = (array->len == 0 && sink->final_boundary_added) ? FALSE : TRUE;
}
return ret;
}
static void
gst_curl_smtp_sink_class_init (GstCurlSmtpSinkClass * klass)
{
GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
GstBaseSinkClass *gstbasesink_class = (GstBaseSinkClass *) klass;
GstCurlBaseSinkClass *gstcurlbasesink_class = (GstCurlBaseSinkClass *) klass;
GstElementClass *element_class = GST_ELEMENT_CLASS (klass);
GST_DEBUG_CATEGORY_INIT (gst_curl_smtp_sink_debug, "curlsmtpsink", 0,
"curl smtp sink element");
GST_DEBUG_OBJECT (klass, "class_init");
gst_element_class_set_static_metadata (element_class,
"Curl smtp sink",
"Sink/Network",
"Upload data over SMTP protocol using libcurl",
"Patricia Muscalu <patricia@axis.com>");
gstcurlbasesink_class->set_protocol_dynamic_options_unlocked =
gst_curl_smtp_sink_set_payload_headers_unlocked;
gstcurlbasesink_class->set_options_unlocked =
gst_curl_smtp_sink_set_transfer_options_unlocked;
gstcurlbasesink_class->set_mime_type = gst_curl_smtp_sink_set_mime_type;
gstcurlbasesink_class->prepare_transfer = gst_curl_smtp_sink_prepare_transfer;
gstcurlbasesink_class->transfer_data_buffer =
gst_curl_smtp_sink_transfer_data_buffer;
gstcurlbasesink_class->flush_data_unlocked =
gst_curl_smtp_sink_flush_data_unlocked;
gstcurlbasesink_class->has_buffered_data_unlocked =
gst_curl_smtp_sink_has_buffered_data_unlocked;
gstbasesink_class->event = gst_curl_smtp_sink_event;
gobject_class->finalize = GST_DEBUG_FUNCPTR (gst_curl_smtp_sink_finalize);
gobject_class->set_property = gst_curl_smtp_sink_set_property;
gobject_class->get_property = gst_curl_smtp_sink_get_property;
g_object_class_install_property (gobject_class, PROP_MAIL_RCPT,
g_param_spec_string ("mail-rcpt", "Mail recipient",
"Single address that the given mail should get sent to", NULL,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_MAIL_FROM,
g_param_spec_string ("mail-from", "Mail sender",
"Single address that the given mail should get sent from", NULL,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_CONTENT_TYPE,
g_param_spec_string ("content-type", "Content type",
"The mime type of the body of the request", NULL,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_SUBJECT,
g_param_spec_string ("subject", "UTF-8 encoded mail subject",
"Mail subject", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_MESSAGE_BODY,
g_param_spec_string ("message-body", "UTF-8 encoded message body",
"Message body", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_USE_SSL,
g_param_spec_boolean ("use-ssl", "Use SSL",
"Use SSL/TLS for the connection", DEFAULT_USE_SSL,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_NBR_ATTACHMENTS,
g_param_spec_int ("nbr-attachments", "Number attachments",
"Number attachments to send", G_MININT, G_MAXINT,
DEFAULT_NBR_ATTACHMENTS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_POP_USER_NAME,
g_param_spec_string ("pop-user", "User name",
"User name to use for POP server authentication", NULL,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_POP_USER_PASSWD,
g_param_spec_string ("pop-passwd", "User password",
"User password to use for POP server authentication", NULL,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_POP_LOCATION,
g_param_spec_string ("pop-location", "POP location",
"URL POP used for authentication", NULL,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
}
static void
gst_curl_smtp_sink_init (GstCurlSmtpSink * sink)
{
sink->curl_recipients = NULL;
sink->mail_rcpt = NULL;
sink->mail_from = NULL;
sink->subject = NULL;
sink->message_body = NULL;
sink->payload_headers = NULL;
sink->base64_chunk = NULL;
g_cond_init (&sink->cond_transfer_end);
sink->transfer_end = FALSE;
sink->eos = FALSE;
sink->final_boundary_added = FALSE;
sink->reset_transfer_options = FALSE;
sink->use_ssl = DEFAULT_USE_SSL;
sink->pop_user = NULL;
sink->pop_passwd = NULL;
sink->pop_location = NULL;
sink->pop_curl = NULL;
}
static void
gst_curl_smtp_sink_finalize (GObject * gobject)
{
GstCurlSmtpSink *this = GST_CURL_SMTP_SINK (gobject);
GST_DEBUG ("finalizing curlsmtpsink");
if (this->curl_recipients != NULL) {
curl_slist_free_all (this->curl_recipients);
}
g_free (this->mail_rcpt);
g_free (this->mail_from);
g_free (this->subject);
g_free (this->message_body);
g_free (this->content_type);
g_cond_clear (&this->cond_transfer_end);
if (this->base64_chunk != NULL) {
if (this->base64_chunk->chunk_array != NULL) {
g_byte_array_free (this->base64_chunk->chunk_array, TRUE);
}
g_free (this->base64_chunk);
}
if (this->payload_headers != NULL) {
g_byte_array_free (this->payload_headers, TRUE);
}
g_free (this->pop_user);
g_free (this->pop_passwd);
if (this->pop_curl != NULL) {
curl_easy_cleanup (this->pop_curl);
this->pop_curl = NULL;
}
g_free (this->pop_location);
G_OBJECT_CLASS (parent_class)->finalize (gobject);
}
static void
gst_curl_smtp_sink_set_property (GObject * object, guint prop_id,
const GValue * value, GParamSpec * pspec)
{
GstCurlSmtpSink *sink;
GstState cur_state;
g_return_if_fail (GST_IS_CURL_SMTP_SINK (object));
sink = GST_CURL_SMTP_SINK (object);
gst_element_get_state (GST_ELEMENT (sink), &cur_state, NULL, 0);
if (cur_state != GST_STATE_PLAYING && cur_state != GST_STATE_PAUSED) {
GST_OBJECT_LOCK (sink);
switch (prop_id) {
case PROP_MAIL_RCPT:
g_free (sink->mail_rcpt);
sink->mail_rcpt = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "mail-rcpt set to %s", sink->mail_rcpt);
break;
case PROP_MAIL_FROM:
g_free (sink->mail_from);
sink->mail_from = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "mail-from set to %s", sink->mail_from);
break;
case PROP_SUBJECT:
g_free (sink->subject);
sink->subject = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "subject set to %s", sink->subject);
break;
case PROP_MESSAGE_BODY:
g_free (sink->message_body);
sink->message_body = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "message-body set to %s", sink->message_body);
break;
case PROP_CONTENT_TYPE:
g_free (sink->content_type);
sink->content_type = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "content-type set to %s", sink->content_type);
break;
case PROP_USE_SSL:
sink->use_ssl = g_value_get_boolean (value);
GST_DEBUG_OBJECT (sink, "use-ssl set to %d", sink->use_ssl);
break;
case PROP_NBR_ATTACHMENTS:
sink->nbr_attachments = g_value_get_int (value);
sink->curr_attachment = 1;
GST_DEBUG_OBJECT (sink, "nbr-attachments set to %d",
sink->nbr_attachments);
break;
case PROP_POP_USER_NAME:
g_free (sink->pop_user);
sink->pop_user = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "pop-user set to %s", sink->pop_user);
break;
case PROP_POP_USER_PASSWD:
g_free (sink->pop_passwd);
sink->pop_passwd = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "pop-passwd set to %s", sink->pop_passwd);
break;
case PROP_POP_LOCATION:
g_free (sink->pop_location);
sink->pop_location = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "pop-location set to %s", sink->pop_location);
break;
default:
GST_DEBUG_OBJECT (sink, "invalid property id %d", prop_id);
break;
}
GST_OBJECT_UNLOCK (sink);
return;
}
/* in PLAYING or PAUSED state */
GST_OBJECT_LOCK (sink);
switch (prop_id) {
case PROP_CONTENT_TYPE:
g_free (sink->content_type);
sink->content_type = g_value_dup_string (value);
GST_DEBUG_OBJECT (sink, "content type set to %s", sink->content_type);
break;
default:
GST_WARNING_OBJECT (sink, "cannot set property when PLAYING");
break;
}
GST_OBJECT_UNLOCK (sink);
}
static void
gst_curl_smtp_sink_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec)
{
GstCurlSmtpSink *sink;
g_return_if_fail (GST_IS_CURL_SMTP_SINK (object));
sink = GST_CURL_SMTP_SINK (object);
switch (prop_id) {
case PROP_MAIL_RCPT:
g_value_set_string (value, sink->mail_rcpt);
break;
case PROP_MAIL_FROM:
g_value_set_string (value, sink->mail_from);
break;
case PROP_SUBJECT:
g_value_set_string (value, sink->subject);
break;
case PROP_MESSAGE_BODY:
g_value_set_string (value, sink->message_body);
break;
case PROP_CONTENT_TYPE:
g_value_set_string (value, sink->content_type);
break;
case PROP_USE_SSL:
g_value_set_boolean (value, sink->use_ssl);
break;
case PROP_NBR_ATTACHMENTS:
g_value_set_int (value, sink->nbr_attachments);
break;
case PROP_POP_USER_NAME:
g_value_set_string (value, sink->pop_user);
break;
case PROP_POP_USER_PASSWD:
g_value_set_string (value, sink->pop_passwd);
break;
case PROP_POP_LOCATION:
g_value_set_string (value, sink->pop_location);
break;
default:
GST_DEBUG_OBJECT (sink, "invalid property id");
break;
}
}
static gboolean
gst_curl_smtp_sink_set_payload_headers_unlocked (GstCurlBaseSink * bcsink)
{
GstCurlSmtpSink *sink = GST_CURL_SMTP_SINK (bcsink);
gchar *hdrs;
gboolean append_headers = FALSE;
if (sink->reset_transfer_options) {
g_assert (!bcsink->is_live);
sink->reset_transfer_options = FALSE;
/* all data has been sent in the previous transfer, setup headers for
* a new transfer */
gst_curl_smtp_sink_set_transfer_options_unlocked (bcsink);
append_headers = TRUE;
}
if (sink->payload_headers == NULL) {
sink->payload_headers = g_byte_array_new ();
append_headers = TRUE;
}
if (sink->base64_chunk == NULL) {
g_assert (!bcsink->is_live);
/* we are just about to send the very first attachment in this transfer.
* This is the only place where base64_chunk and its array are allocated.
*/
sink->base64_chunk = g_malloc (sizeof (Base64Chunk));
sink->base64_chunk->chunk_array = g_byte_array_new ();
append_headers = TRUE;
} else {
g_assert (sink->base64_chunk->chunk_array != NULL);
}
sink->base64_chunk->state = 0;
sink->base64_chunk->save = 0;
if (G_UNLIKELY (!append_headers)) {
g_byte_array_free (sink->base64_chunk->chunk_array, TRUE);
sink->base64_chunk->chunk_array = NULL;
g_free (sink->base64_chunk);
sink->base64_chunk = NULL;
return FALSE;
}
hdrs = g_strdup_printf ("\r\n\r\n--%s\r\n"
"Content-Type: application/octet-stream; name=\"%s\"\r\n"
/* TODO: support for other encodings */
"Content-Transfer-Encoding: BASE64\r\n"
"Content-Disposition: attachment; filename=\"%s\"\r\n\r\n"
"\r\n", BOUNDARY_STRING, bcsink->file_name, bcsink->file_name);
g_byte_array_append (sink->payload_headers, (guint8 *) hdrs, strlen (hdrs));
g_free (hdrs);
return TRUE;
}
/* MIME encoded-word syntax (RFC 2047):
* =?charset?encoding?encoded text?= */
static gchar *
generate_encoded_word (gchar * str)
{
gchar *encoded_word;
g_assert (str);
if (g_utf8_validate (str, -1, NULL)) {
gchar *base64_str;
base64_str = g_base64_encode ((const guchar *) str, strlen (str));
encoded_word = g_strdup_printf ("=?utf-8?B?%s?=", base64_str);
g_free (base64_str);
} else {
GST_WARNING ("string is not a valid UTF-8 string");
encoded_word = g_strdup (str);
}
/* TODO: 75 character limit */
return encoded_word;
}
/* Setup header fields (From:/To:/Date: etc) and message body for the e-mail.
* This data is supposed to be sent to libcurl just before any media data.
* This function is called once for each e-mail:
* 1. we are about the send the first attachment
* 2. we have sent all the attachments and continue sending new ones within
* a new e-mail (transfer options have been reset). */
static gboolean
gst_curl_smtp_sink_set_transfer_options_unlocked (GstCurlBaseSink * bcsink)
{
GstCurlSmtpSink *sink = GST_CURL_SMTP_SINK (bcsink);
GstCurlTlsSinkClass *parent_class;
gchar *request_headers;
GDateTime *date;
gchar *date_str;
gchar **tmp_list = NULL;
gchar *subject_header = NULL;
gchar *message_body = NULL;
gchar *rcpt_header = NULL;
gchar *enc_rcpt;
gchar *from_header = NULL;
gchar *enc_from;
gint i;
CURLcode res;
g_assert (sink->payload_headers == NULL);
g_assert (sink->mail_rcpt != NULL);
g_assert (sink->mail_from != NULL);
/* time */
date = g_date_time_new_now_local ();
date_str = g_date_time_format (date, "%a %b %e %H:%M:%S %Y %z");
g_date_time_unref (date);
/* recipient, sender and subject are all UTF-8 strings, which are additionally
* base64-encoded */
/* recipient */
enc_rcpt = generate_encoded_word (sink->mail_rcpt);
rcpt_header = g_strdup_printf ("%s <%s>", enc_rcpt, sink->mail_rcpt);
g_free (enc_rcpt);
/* sender */
enc_from = generate_encoded_word (sink->mail_from);
from_header = g_strdup_printf ("%s <%s>", enc_from, sink->mail_from);
g_free (enc_from);
/* subject */
if (sink->subject != NULL) {
subject_header = generate_encoded_word (sink->subject);
}
/* message */
if (sink->message_body != NULL) {
message_body = g_base64_encode ((const guchar *) sink->message_body,
strlen (sink->message_body));
}
request_headers = g_strdup_printf (
/* headers */
"To: %s\r\n"
"From: %s\r\n"
"Subject: %s\r\n"
"Date: %s\r\n"
MIME_VERSION "\r\n"
"Content-Type: multipart/mixed; boundary=%s\r\n" "\r\n"
/* body headers */
"--" BOUNDARY_STRING "\r\n"
"Content-Type: text/plain; charset=utf-8\r\n"
"Content-Transfer-Encoding: BASE64\r\n"
/* message body */
"\r\n%s\r\n",
rcpt_header,
from_header,
subject_header ? subject_header : "",
date_str, BOUNDARY_STRING, message_body ? message_body : "");
sink->payload_headers = g_byte_array_new ();
g_byte_array_append (sink->payload_headers, (guint8 *) request_headers,
strlen (request_headers));
g_free (date_str);
g_free (subject_header);
g_free (message_body);
g_free (rcpt_header);
g_free (from_header);
g_free (request_headers);
res = curl_easy_setopt (bcsink->curl, CURLOPT_MAIL_FROM, sink->mail_from);
if (res != CURLE_OK) {
bcsink->error =
g_strdup_printf ("failed to set SMTP sender email address: %s",
curl_easy_strerror (res));
return FALSE;
}
if (sink->curl_recipients != NULL) {
curl_slist_free_all (sink->curl_recipients);
sink->curl_recipients = NULL;
}
tmp_list = g_strsplit_set (sink->mail_rcpt, MAIL_RCPT_DELIMITER, -1);
for (i = 0; i < g_strv_length (tmp_list); i++) {
sink->curl_recipients = curl_slist_append (sink->curl_recipients,
tmp_list[i]);
}
g_strfreev (tmp_list);
/* note that the CURLOPT_MAIL_RCPT takes a list, not a char array */
res = curl_easy_setopt (bcsink->curl, CURLOPT_MAIL_RCPT,
sink->curl_recipients);
if (res != CURLE_OK) {
bcsink->error =
g_strdup_printf ("failed to set SMTP recipient email address: %s",
curl_easy_strerror (res));
return FALSE;
}
res = curl_easy_setopt (bcsink->curl, CURLOPT_UPLOAD, 1L);
if (res != CURLE_OK) {
bcsink->error = g_strdup_printf ("failed to prepare for upload: %s",
curl_easy_strerror (res));
return FALSE;
}
parent_class = GST_CURL_TLS_SINK_GET_CLASS (sink);
if (sink->use_ssl) {
return parent_class->set_options_unlocked (bcsink);
}
return TRUE;
}
/* FIXME: exactly the same function as in http sink */
static void
gst_curl_smtp_sink_set_mime_type (GstCurlBaseSink * bcsink, GstCaps * caps)
{
GstCurlSmtpSink *sink = GST_CURL_SMTP_SINK (bcsink);
GstStructure *structure;
const gchar *mime_type;
if (sink->content_type != NULL) {
return;
}
structure = gst_caps_get_structure (caps, 0);
mime_type = gst_structure_get_name (structure);
sink->content_type = g_strdup (mime_type);
}
static size_t
gst_curl_smtp_sink_flush_data_unlocked (GstCurlBaseSink * bcsink,
void *curl_ptr, size_t block_size, gboolean new_file,
gboolean close_transfer)
{
GstCurlSmtpSink *sink = GST_CURL_SMTP_SINK (bcsink);
Base64Chunk *chunk = sink->base64_chunk;
gint state = chunk->state;
gint save = chunk->save;
GByteArray *array = chunk->chunk_array;
size_t bytes_to_send;
gint len;
gchar *data_out;
GST_DEBUG
("live: %d, num attachments: %d, curr_attachment: %d, "
"eos: %d, close_transfer: %d, final boundary: %d, array_len: %d",
bcsink->is_live, sink->nbr_attachments, sink->curr_attachment,
sink->eos, close_transfer, sink->final_boundary_added, array->len);
if ((bcsink->is_live && (sink->curr_attachment == sink->nbr_attachments))
|| (sink->nbr_attachments == 1) || sink->eos
|| sink->final_boundary_added) {
bcsink->is_live = FALSE;
sink->reset_transfer_options = TRUE;
sink->final_boundary_added = FALSE;
sink->curr_attachment = 1;
GST_DEBUG ("returning 0, no more data to send in this transfer");
return 0;
}
/* it will need up to 5 bytes if line-breaking is enabled, however an
* additional byte is needed for <CR> as it is not automatically added by
* glib */
data_out = g_malloc (6);
len = g_base64_encode_close (TRUE, data_out, &state, &save);
chunk->state = state;
chunk->save = save;
/* workaround */
data_out[len - 1] = '\r';
data_out[len] = '\n';
/* +1 for CR */
g_byte_array_append (array, (guint8 *) data_out, (guint) (len + 1));
g_free (data_out);
if (new_file) {
sink->curr_attachment++;
bcsink->is_live = TRUE;
/* reset flag */
bcsink->new_file = FALSE;
/* set payload headers for new file */
gst_curl_smtp_sink_set_payload_headers_unlocked (bcsink);
}
if (close_transfer && !sink->final_boundary_added)
add_final_boundary_unlocked (sink);
bytes_to_send = MIN (block_size, array->len);
memcpy ((guint8 *) curl_ptr, array->data, bytes_to_send);
g_byte_array_remove_range (array, 0, bytes_to_send);
return bytes_to_send;
}
static size_t
transfer_chunk (void *curl_ptr, TransferBuffer * buffer, Base64Chunk * chunk,
size_t block_size, guint * last_chunk)
{
size_t bytes_to_send;
const guchar *data_in = buffer->ptr;
size_t data_in_offset = buffer->offset;
gint state = chunk->state;
gint save = chunk->save;
GByteArray *array = chunk->chunk_array;
gchar *data_out;
bytes_to_send = MIN (block_size, buffer->len);
if (bytes_to_send == 0) {
bytes_to_send = MIN (block_size, array->len);
}
/* base64 encode data */
if (buffer->len > 0) {
gsize len;
gchar *ptr_in;
gchar *ptr_out;
gsize size_out;
gint i;
/* if line-breaking is enabled, at least: ((len / 3 + 1) * 4 + 4) / 72 + 1
* bytes of extra space is required. However, additional <CR>'s are
* required, thus we need ((len / 3 + 2) * 4 + 4) / 72 + 2 extra bytes.
*/
size_out = (bytes_to_send / 3 + 1) * 4 + 4 + bytes_to_send +
((bytes_to_send / 3 + 2) * 4 + 4) / 72 + 2;
data_out = g_malloc (size_out);
len = g_base64_encode_step (data_in + data_in_offset, bytes_to_send, TRUE,
data_out, &state, &save);
chunk->state = state;
chunk->save = save;
/* LF->CRLF filter */
ptr_in = ptr_out = data_out;
for (i = 0; i < len; i++) {
if (*ptr_in == '\n') {
*ptr_in = '\r';
g_byte_array_append (array, (guint8 *) ptr_out, ptr_in - ptr_out);
g_byte_array_append (array, (guint8 *) "\r\n", strlen ("\r\n"));
ptr_out = ptr_in + 1;
}
ptr_in++;
}
if (ptr_in - ptr_out) {
g_byte_array_append (array, (guint8 *) ptr_out, ptr_in - ptr_out);
}
g_free (data_out);
data_out = NULL;
buffer->offset += bytes_to_send;
buffer->len -= bytes_to_send;
bytes_to_send = MIN (block_size, array->len);
memcpy ((guint8 *) curl_ptr, array->data, bytes_to_send);
g_byte_array_remove_range (array, 0, bytes_to_send);
if (array->len == 0) {
*last_chunk = 1;
}
return bytes_to_send;
}
/* at this point all data has been encoded */
memcpy ((guint8 *) curl_ptr, array->data, bytes_to_send);
g_byte_array_remove_range (array, 0, bytes_to_send);
if (array->len == 0) {
*last_chunk = 1;
}
return bytes_to_send;
}
static size_t
gst_curl_smtp_sink_transfer_data_buffer (GstCurlBaseSink * bcsink,
void *curl_ptr, size_t block_size, guint * last_chunk)
{
GstCurlSmtpSink *sink = GST_CURL_SMTP_SINK (bcsink);
size_t bytes_to_send;
if (sink->payload_headers && sink->payload_headers->len) {
return transfer_payload_headers (sink, curl_ptr, block_size);
}
if (sink->base64_chunk != NULL) {
bytes_to_send =
transfer_chunk (curl_ptr, bcsink->transfer_buf, sink->base64_chunk,
block_size, last_chunk);
/* if last chunk of current buffer and max attachments per mail is reached
* then add final boundary */
if (*last_chunk && sink->curr_attachment == sink->nbr_attachments &&
!sink->final_boundary_added) {
add_final_boundary_unlocked (sink);
/* now that we've added the final boundary to the array we have on more
* chunk to send */
*last_chunk = 0;
}
GST_OBJECT_LOCK (sink);
if (sink->eos) {
gst_curl_smtp_sink_notify_transfer_end_unlocked (sink);
}
GST_OBJECT_UNLOCK (sink);
return bytes_to_send;
}
/* we should never get here */
return 0;
}
static size_t
transfer_payload_headers (GstCurlSmtpSink * sink,
void *curl_ptr, size_t block_size)
{
size_t bytes_to_send;
GByteArray *headers = sink->payload_headers;
bytes_to_send = MIN (block_size, headers->len);
memcpy ((guint8 *) curl_ptr, headers->data, bytes_to_send);
g_byte_array_remove_range (headers, 0, bytes_to_send);
if (headers->len == 0) {
g_byte_array_free (headers, TRUE);
sink->payload_headers = NULL;
}
return bytes_to_send;
}
static gboolean
gst_curl_smtp_sink_prepare_transfer (GstCurlBaseSink * bcsink)
{
GstCurlSmtpSink *sink = GST_CURL_SMTP_SINK (bcsink);
CURLcode res;
gboolean ret = TRUE;
if (sink->pop_location && strlen (sink->pop_location)) {
if ((sink->pop_curl = curl_easy_init ()) == NULL) {
bcsink->error = g_strdup ("POP protocol: failed to create handler");
return FALSE;
}
res = curl_easy_setopt (sink->pop_curl, CURLOPT_URL, sink->pop_location);
if (res != CURLE_OK) {
bcsink->error = g_strdup_printf ("failed to set URL: %s",
curl_easy_strerror (res));
return FALSE;
}
if (sink->pop_user != NULL && strlen (sink->pop_user) &&
sink->pop_passwd != NULL && strlen (sink->pop_passwd)) {
res = curl_easy_setopt (sink->pop_curl, CURLOPT_USERNAME, sink->pop_user);
if (res != CURLE_OK) {
bcsink->error = g_strdup_printf ("failed to set user name: %s",
curl_easy_strerror (res));
return FALSE;
}
res = curl_easy_setopt (sink->pop_curl, CURLOPT_PASSWORD,
sink->pop_passwd);
if (res != CURLE_OK) {
bcsink->error = g_strdup_printf ("failed to set user name: %s",
curl_easy_strerror (res));
return FALSE;
}
}
}
if (sink->pop_curl != NULL) {
/* ready to initialize connection to POP server */
res = curl_easy_perform (sink->pop_curl);
if (res != CURLE_OK) {
bcsink->error = g_strdup_printf ("POP transfer failed: %s",
curl_easy_strerror (res));
ret = FALSE;
}
curl_easy_cleanup (sink->pop_curl);
sink->pop_curl = NULL;
}
return ret;
}
Reference in a new issue View git blame Copy permalink