gstreamer/docs/pwg/appendix-checklist.xml
Tim-Philipp Müller fe20af8eae docs/manual/advanced-dataaccess.xml: Add some very very basic error checking.
Original commit message from CVS:
* docs/manual/advanced-dataaccess.xml:
Add some very very basic error checking.
* docs/pwg/appendix-checklist.xml:
Some updates to the list of things to check when writing an element.
2006-03-08 14:30:40 +00:00

205 lines
8 KiB
XML

<chapter id="chapter-checklist-element">
<title>Things to check when writing an element</title>
<para>
This chapter contains a fairly random selection of things to take care
of when writing an element. It's up to you how far you're going to stick
to those guidelines. However, keep in mind that when you're writing an
element and hope for it to be included in the mainstream &GStreamer;
distribution, it <emphasis>has to</emphasis> meet those requirements.
As far as possible, we will try to explain why those requirements are
set.
</para>
<sect1 id="section-checklist-states">
<title>About states</title>
<itemizedlist>
<listitem>
<para>
Make sure the state of an element gets reset when going to
<classname>NULL</classname>. Ideally, this should set all
object properties to their original state. This function
should also be called from _init.
</para>
</listitem>
<listitem>
<para>
Make sure an element forgets <emphasis>everything</emphasis>
about its contained stream when going from
<classname>PAUSED</classname> to <classname>READY</classname>. In
<classname>READY</classname>, all stream states are reset. An
element that goes from <classname>PAUSED</classname> to
<classname>READY</classname> and back to
<classname>PAUSED</classname> should start reading the
stream from he start again.
</para>
</listitem>
<listitem>
<para>
People that use <command>gst-launch</command> for testing have
the tendency to not care about cleaning up. This is
<emphasis>wrong</emphasis>. An element should be tested using
various applications, where testing not only means to <quote>make
sure it doesn't crash</quote>, but also to test for memory leaks
using tools such as <command>valgrind</command>. Elements have to
be reusable in a pipeline after having been reset.
</para>
</listitem>
</itemizedlist>
</sect1>
<sect1 id="section-checklist-debug">
<title>Debugging</title>
<itemizedlist>
<listitem>
<para>
Elements should <emphasis>never</emphasis> use their standard
output for debugging (using functions such as <function>printf
()</function> or <function>g_print ()</function>). Instead,
elements should use the logging functions provided by &GStreamer;,
named <function>GST_DEBUG ()</function>,
<function>GST_LOG ()</function>, <function>GST_INFO ()</function>,
<function>GST_WARNING ()</function> and
<function>GST_ERROR ()</function>. The various logging levels can
be turned on and off at runtime and can thus be used for solving
issues as they turn up. Instead of <function>GST_LOG ()</function>
(as an example), you can also use <function>GST_LOG_OBJECT
()</function> to print the object that you're logging output for.
</para>
</listitem>
<listitem>
<para>
Ideally, elements should use their own debugging category. Most
elements use the following code to do that:
</para>
<programlisting>
GST_DEBUG_CATEGORY_STATIC (myelement_debug);
#define GST_CAT_DEFAULT myelement_debug
[..]
static void
gst_myelement_class_init (GstMyelementClass *klass)
{
[..]
GST_DEBUG_CATEGORY_INIT (myelement_debug, "myelement",
0, "My own element");
}
</programlisting>
<para>
At runtime, you can turn on debugging using the commandline
option <command>--gst-debug=myelement:5</command>.
</para>
</listitem>
<listitem>
<para>
Elements should use GST_DEBUG_FUNCPTR when setting pad functions or
overriding element class methods, for example:
<programlisting>
gst_pad_set_event_func (myelement->srcpad,
GST_DEBUG_FUNCPTR (my_element_src_event));
</programlisting>
This makes debug output much easier to read later on.
</para>
</listitem>
<listitem>
<para>
Elements that are aimed for inclusion into one of the GStreamer
modules should ensure consistent naming of the element name,
structures and function names. For example, if the element type is
GstYellowFooDec, functions should be prefixed with
gst_yellow_foo_dec_ and the element should be registered
as 'yellowfoodec'. Separate words should be separate in this scheme,
so it should be GstFooDec and gst_foo_dec, and not GstFoodec and
gst_foodec.
</para>
</listitem>
</itemizedlist>
</sect1>
<sect1 id="section-checklist-query">
<title>Querying, events and the like</title>
<itemizedlist>
<listitem>
<para>
All elements to which it applies (sources, sinks, demuxers)
should implement query functions on their pads, so that
applications and neighbour elements can request the current
position, the stream length (if known) and so on.
</para>
</listitem>
<listitem>
<para>
Elements should make sure they forward events they do not
handle with gst_pad_event_default (pad, event) instead of
just dropping them. Events should never be dropped unless
specifically intended.
</para>
</listitem>
<listitem>
<para>
Elements should make sure they forward queries they do not
handle with gst_pad_query_default (pad, query) instead of
just dropping them.
</para>
</listitem>
<listitem>
<para>
Elements should use gst_pad_get_parent() in event and query
functions, so that they hold a reference to the element while they
are operating. Note that gst_pad_get_parent() increases the
reference count of the element, so you must be very careful to call
gst_object_unref (element) before returning from your query or
event function, otherwise you will leak memory.
</para>
</listitem>
</itemizedlist>
</sect1>
<sect1 id="section-checklist-testing">
<title>Testing your element</title>
<itemizedlist>
<listitem>
<para>
<command>gst-launch</command> is <emphasis>not</emphasis> a good
tool to show that your element is finished. Applications such as
Rhythmbox and Totem (for GNOME) or AmaroK (for KDE)
<emphasis>are</emphasis>. <command>gst-launch</command> will not
test various things such as proper clean-up on reset, interrupt
event handling, querying and so on.
</para>
</listitem>
<listitem>
<para>
Parsers and demuxers should make sure to check their input. Input
cannot be trusted. Prevent possible buffer overflows and the like.
Feel free to error out on unrecoverable stream errors. Test your
demuxer using stream corruption elements such as
<classname>breakmydata</classname> (included in gst-plugins). It
will randomly insert, delete and modify bytes in a stream, and is
therefore a good test for robustness. If your element crashes
when adding this element, your element needs fixing. If it errors
out properly, it's good enough. Ideally, it'd just continue to
work and forward data as much as possible.
</para>
</listitem>
<listitem>
<para>
Demuxers should not assume that seeking works. Be prepared to
work with unseekable input streams (e.g. network sources) as
well.
</para>
</listitem>
<listitem>
<para>
Sources and sinks should be prepared to be assigned another clock
then the one they expose themselves. Always use the provided clock
for synchronization, else you'll get A/V sync issues.
</para>
</listitem>
</itemizedlist>
</sect1>
</chapter>