gstreamer/libs/gst/controller/gstcontroller.c
2010-03-11 10:59:57 +01:00

1285 lines
38 KiB
C

/* GStreamer
*
* Copyright (C) <2005> Stefan Kost <ensonic at users dot sf dot net>
* Copyright (C) 2007 Sebastian Dröge <slomo@circular-chaos.org>
*
* gstcontroller.c: dynamic parameter control subsystem
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
/**
* SECTION:gstcontroller
* @short_description: dynamic parameter control subsystem
*
* The controller subsystem offers a lightweight way to adjust gobject
* properties over stream-time. It works by using time-stamped value pairs that
* are queued for element-properties. At run-time the elements continously pull
* values changes for the current stream-time.
*
* What needs to be changed in a #GstElement?
* Very little - it is just two steps to make a plugin controllable!
* <orderedlist>
* <listitem><para>
* mark gobject-properties paramspecs that make sense to be controlled,
* by GST_PARAM_CONTROLLABLE.
* </para></listitem>
* <listitem><para>
* when processing data (get, chain, loop function) at the beginning call
* gst_object_sync_values(element,timestamp).
* This will made the controller to update all gobject properties that are under
* control with the current values based on timestamp.
* </para></listitem>
* </orderedlist>
*
* What needs to be done in applications?
* Again its not a lot to change.
* <orderedlist>
* <listitem><para>
* first put some properties under control, by calling
* controller = gst_object_control_properties (object, "prop1", "prop2",...);
* </para></listitem>
* <listitem><para>
* Get a #GstControlSource for the property and set it up.
* csource = gst_interpolation_control_source_new ();
* gst_interpolation_control_source_set_interpolation_mode(csource, mode);
* gst_interpolation_control_source_set (csource,0 * GST_SECOND, value1);
* gst_interpolation_control_source_set (csource,1 * GST_SECOND, value2);
* </para></listitem>
* <listitem><para>
* Set the #GstControlSource in the controller.
* gst_controller_set_control_source (controller, "prop1", csource);
* </para></listitem>
* <listitem><para>
* start your pipeline
* </para></listitem>
* </orderedlist>
*/
#ifdef HAVE_CONFIG_H
# include "config.h"
#endif
#include "gstcontroller.h"
#include "gstcontrollerprivate.h"
#include "gstcontrolsource.h"
#include "gstinterpolationcontrolsource.h"
#define GST_CAT_DEFAULT controller_debug
GST_DEBUG_CATEGORY_EXTERN (GST_CAT_DEFAULT);
static GObjectClass *parent_class = NULL;
GQuark priv_gst_controller_key;
/* property ids */
enum
{
PROP_CONTROL_RATE = 1
};
struct _GstControllerPrivate
{
GstClockTime control_rate;
GstClockTime last_sync;
};
/* helper */
static void
gst_controlled_property_add_interpolation_control_source (GstControlledProperty
* self)
{
GstControlSource *csource =
GST_CONTROL_SOURCE (gst_interpolation_control_source_new ());
GST_INFO
("Adding a GstInterpolationControlSource because of backward compatibility");
g_return_if_fail (!self->csource);
gst_control_source_bind (GST_CONTROL_SOURCE (csource), self->pspec);
self->csource = csource;
}
/*
* gst_controlled_property_new:
* @object: for which object the controlled property should be set up
* @name: the name of the property to be controlled
*
* Private method which initializes the fields of a new controlled property
* structure.
*
* Returns: a freshly allocated structure or %NULL
*/
static GstControlledProperty *
gst_controlled_property_new (GObject * object, const gchar * name)
{
GstControlledProperty *prop = NULL;
GParamSpec *pspec;
GST_INFO ("trying to put property '%s' under control", name);
/* check if the object has a property of that name */
if ((pspec =
g_object_class_find_property (G_OBJECT_GET_CLASS (object), name))) {
GST_DEBUG (" psec->flags : 0x%08x", pspec->flags);
/* check if this param is witable && controlable && !construct-only */
g_return_val_if_fail ((pspec->flags & (G_PARAM_WRITABLE |
GST_PARAM_CONTROLLABLE | G_PARAM_CONSTRUCT_ONLY)) ==
(G_PARAM_WRITABLE | GST_PARAM_CONTROLLABLE), NULL);
if ((prop = g_slice_new (GstControlledProperty))) {
prop->pspec = pspec;
prop->name = pspec->name;
prop->csource = NULL;
prop->disabled = FALSE;
memset (&prop->last_value, 0, sizeof (GValue));
g_value_init (&prop->last_value, G_PARAM_SPEC_VALUE_TYPE (prop->pspec));
}
} else {
GST_WARNING ("class '%s' has no property '%s'", G_OBJECT_TYPE_NAME (object),
name);
}
return prop;
}
/*
* gst_controlled_property_free:
* @prop: the object to free
*
* Private method which frees all data allocated by a #GstControlledProperty
* instance.
*/
static void
gst_controlled_property_free (GstControlledProperty * prop)
{
if (prop->csource)
g_object_unref (prop->csource);
g_value_unset (&prop->last_value);
g_slice_free (GstControlledProperty, prop);
}
/*
* gst_controller_find_controlled_property:
* @self: the controller object to search for a property in
* @name: the gobject property name to look for
*
* Searches the list of properties under control.
*
* Returns: a #GstControlledProperty object of %NULL if the property is not
* being controlled.
*/
static GstControlledProperty *
gst_controller_find_controlled_property (GstController * self,
const gchar * name)
{
GstControlledProperty *prop;
GList *node;
for (node = self->properties; node; node = g_list_next (node)) {
prop = node->data;
/* FIXME: eventually use GQuark to speed it up */
if (!strcmp (prop->name, name)) {
return prop;
}
}
GST_DEBUG ("controller does not (yet) manage property '%s'", name);
return NULL;
}
/*
* gst_controller_add_property:
* @self: the controller object or %NULL if none yet exists
* @object: object to bind the property
* @name: name of projecty in @object
* @ref_existing: pointer to flag that tracks if we need to ref an existng
* controller still
*
* Creates a new #GstControlledProperty if there is none for property @name yet.
* In case this is the first controlled propery, it creates the controller as
* well.
*
* Returns: a newly created controller object or reffed existing one with the
* given property bound.
*/
static GstController *
gst_controller_add_property (GstController * self, GObject * object,
const gchar * name, gboolean * ref_existing)
{
/* test if this property isn't yet controlled */
if (!self || !gst_controller_find_controlled_property (self, name)) {
GstControlledProperty *prop;
/* create GstControlledProperty and add to self->propeties List */
if ((prop = gst_controlled_property_new (object, name))) {
/* if we don't have a controller object yet, now is the time to create one */
if (!self) {
self = g_object_newv (GST_TYPE_CONTROLLER, 0, NULL);
self->object = g_object_ref (object);
/* store the controller */
g_object_set_qdata (object, priv_gst_controller_key, self);
*ref_existing = FALSE;
} else {
/* only want one single _ref(), even for multiple properties */
if (*ref_existing) {
g_object_ref (self);
*ref_existing = FALSE;
GST_INFO ("returning existing controller");
}
}
self->properties = g_list_prepend (self->properties, prop);
}
} else {
GST_WARNING ("trying to control property %s again", name);
if (*ref_existing) {
g_object_ref (self);
*ref_existing = FALSE;
}
}
return self;
}
/* methods */
/**
* gst_controller_new_valist:
* @object: the object of which some properties should be controlled
* @var_args: %NULL terminated list of property names that should be controlled
*
* Creates a new GstController for the given object's properties
*
* Returns: the new controller.
*/
GstController *
gst_controller_new_valist (GObject * object, va_list var_args)
{
GstController *self;
gboolean ref_existing = TRUE;
gchar *name;
g_return_val_if_fail (G_IS_OBJECT (object), NULL);
GST_INFO ("setting up a new controller");
self = g_object_get_qdata (object, priv_gst_controller_key);
/* create GstControlledProperty for each property */
while ((name = va_arg (var_args, gchar *))) {
self = gst_controller_add_property (self, object, name, &ref_existing);
}
va_end (var_args);
if (self)
GST_INFO ("controller->ref_count=%d", G_OBJECT (self)->ref_count);
return self;
}
/**
* gst_controller_new_list:
* @object: the object of which some properties should be controlled
* @list: list of property names that should be controlled
*
* Creates a new GstController for the given object's properties
*
* Returns: the new controller.
*/
GstController *
gst_controller_new_list (GObject * object, GList * list)
{
GstController *self;
gboolean ref_existing = TRUE;
gchar *name;
GList *node;
g_return_val_if_fail (G_IS_OBJECT (object), NULL);
GST_INFO ("setting up a new controller");
self = g_object_get_qdata (object, priv_gst_controller_key);
/* create GstControlledProperty for each property */
for (node = list; node; node = g_list_next (node)) {
name = (gchar *) node->data;
self = gst_controller_add_property (self, object, name, &ref_existing);
}
if (self)
GST_INFO ("controller->ref_count=%d", G_OBJECT (self)->ref_count);
return self;
}
/**
* gst_controller_new:
* @object: the object of which some properties should be controlled
* @...: %NULL terminated list of property names that should be controlled
*
* Creates a new GstController for the given object's properties
*
* Returns: the new controller.
*/
GstController *
gst_controller_new (GObject * object, ...)
{
GstController *self;
va_list var_args;
g_return_val_if_fail (G_IS_OBJECT (object), NULL);
va_start (var_args, object);
self = gst_controller_new_valist (object, var_args);
va_end (var_args);
return self;
}
/**
* gst_controller_remove_properties_valist:
* @self: the controller object from which some properties should be removed
* @var_args: %NULL terminated list of property names that should be removed
*
* Removes the given object properties from the controller
*
* Returns: %FALSE if one of the given property isn't handled by the controller, %TRUE otherwise
*/
gboolean
gst_controller_remove_properties_valist (GstController * self, va_list var_args)
{
gboolean res = TRUE;
GstControlledProperty *prop;
gchar *name;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
while ((name = va_arg (var_args, gchar *))) {
/* find the property in the properties list of the controller, remove and free it */
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, name))) {
self->properties = g_list_remove (self->properties, prop);
//g_signal_handler_disconnect (self->object, prop->notify_handler_id);
gst_controlled_property_free (prop);
} else {
res = FALSE;
}
g_mutex_unlock (self->lock);
}
return res;
}
/**
* gst_controller_remove_properties_list:
* @self: the controller object from which some properties should be removed
* @list: #GList of property names that should be removed
*
* Removes the given object properties from the controller
*
* Returns: %FALSE if one of the given property isn't handled by the controller, %TRUE otherwise
*/
gboolean
gst_controller_remove_properties_list (GstController * self, GList * list)
{
gboolean res = TRUE;
GstControlledProperty *prop;
gchar *name;
GList *tmp;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
for (tmp = list; tmp; tmp = g_list_next (tmp)) {
name = (gchar *) tmp->data;
/* find the property in the properties list of the controller, remove and free it */
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, name))) {
self->properties = g_list_remove (self->properties, prop);
//g_signal_handler_disconnect (self->object, prop->notify_handler_id);
gst_controlled_property_free (prop);
} else {
res = FALSE;
}
g_mutex_unlock (self->lock);
}
return res;
}
/**
* gst_controller_remove_properties:
* @self: the controller object from which some properties should be removed
* @...: %NULL terminated list of property names that should be removed
*
* Removes the given object properties from the controller
*
* Returns: %FALSE if one of the given property isn't handled by the controller, %TRUE otherwise
*/
gboolean
gst_controller_remove_properties (GstController * self, ...)
{
gboolean res;
va_list var_args;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
va_start (var_args, self);
res = gst_controller_remove_properties_valist (self, var_args);
va_end (var_args);
return res;
}
/**
* gst_controller_set_property_disabled:
* @self: the #GstController which should be disabled
* @property_name: property to disable
* @disabled: boolean that specifies whether to disable the controller
* or not.
*
* This function is used to disable the #GstController on a property for
* some time, i.e. gst_controller_sync_values() will do nothing for the
* property.
*
* Since: 0.10.14
*/
void
gst_controller_set_property_disabled (GstController * self,
const gchar * property_name, gboolean disabled)
{
GstControlledProperty *prop;
g_return_if_fail (GST_IS_CONTROLLER (self));
g_return_if_fail (property_name);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
prop->disabled = disabled;
}
g_mutex_unlock (self->lock);
}
/**
* gst_controller_set_disabled:
* @self: the #GstController which should be disabled
* @disabled: boolean that specifies whether to disable the controller
* or not.
*
* This function is used to disable all properties of the #GstController
* for some time, i.e. gst_controller_sync_values() will do nothing.
*
* Since: 0.10.14
*/
void
gst_controller_set_disabled (GstController * self, gboolean disabled)
{
GList *node;
GstControlledProperty *prop;
g_return_if_fail (GST_IS_CONTROLLER (self));
g_mutex_lock (self->lock);
for (node = self->properties; node; node = node->next) {
prop = node->data;
prop->disabled = disabled;
}
g_mutex_unlock (self->lock);
}
/**
* gst_controller_set_control_source:
* @self: the controller object
* @property_name: name of the property for which the #GstControlSource should be set
* @csource: the #GstControlSource that should be used for the property
*
* Sets the #GstControlSource for @property_name. If there already was a #GstControlSource
* for this property it will be unreferenced.
*
* Returns: %FALSE if the given property isn't handled by the controller or the new #GstControlSource
* couldn't be bound to the property, %TRUE if everything worked as expected.
*
* Since: 0.10.14
*/
gboolean
gst_controller_set_control_source (GstController * self,
const gchar * property_name, GstControlSource * csource)
{
GstControlledProperty *prop;
gboolean ret = FALSE;
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
GstControlSource *old = prop->csource;
if (csource && (ret = gst_control_source_bind (csource, prop->pspec))) {
g_object_ref (csource);
prop->csource = csource;
} else if (!csource) {
ret = TRUE;
prop->csource = NULL;
}
if (ret && old)
g_object_unref (old);
}
g_mutex_unlock (self->lock);
return ret;
}
/**
* gst_controller_get_control_source:
* @self: the controller object
* @property_name: name of the property for which the #GstControlSource should be get
*
* Gets the corresponding #GstControlSource for the property. This should be unreferenced
* again after use.
*
* Returns: the #GstControlSource for @property_name or NULL if the property is not
* controlled by this controller or no #GstControlSource was assigned yet.
*
* Since: 0.10.14
*/
GstControlSource *
gst_controller_get_control_source (GstController * self,
const gchar * property_name)
{
GstControlledProperty *prop;
GstControlSource *ret = NULL;
g_return_val_if_fail (GST_IS_CONTROLLER (self), NULL);
g_return_val_if_fail (property_name, NULL);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
ret = prop->csource;
}
g_mutex_unlock (self->lock);
if (ret)
g_object_ref (ret);
return ret;
}
/**
* gst_controller_get:
* @self: the controller object which handles the properties
* @property_name: the name of the property to get
* @timestamp: the time the control-change should be read from
*
* Gets the value for the given controller-handled property at the requested
* time.
*
* Returns: the GValue of the property at the given time, or %NULL if the
* property isn't handled by the controller
*/
GValue *
gst_controller_get (GstController * self, const gchar * property_name,
GstClockTime timestamp)
{
GstControlledProperty *prop;
GValue *val = NULL;
g_return_val_if_fail (GST_IS_CONTROLLER (self), NULL);
g_return_val_if_fail (property_name, NULL);
g_return_val_if_fail (GST_CLOCK_TIME_IS_VALID (timestamp), NULL);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
val = g_new0 (GValue, 1);
g_value_init (val, G_PARAM_SPEC_VALUE_TYPE (prop->pspec));
if (prop->csource) {
gboolean res;
/* get current value via control source */
res = gst_control_source_get_value (prop->csource, timestamp, val);
if (!res) {
g_free (val);
val = NULL;
}
} else {
g_object_get_property (self->object, prop->name, val);
}
}
g_mutex_unlock (self->lock);
return val;
}
/**
* gst_controller_suggest_next_sync:
* @self: the controller that handles the values
*
* Returns a suggestion for timestamps where buffers should be split
* to get best controller results.
*
* Returns: Returns the suggested timestamp or %GST_CLOCK_TIME_NONE
* if no control-rate was set.
*
* Since: 0.10.13
*/
GstClockTime
gst_controller_suggest_next_sync (GstController * self)
{
GstClockTime ret;
g_return_val_if_fail (GST_IS_CONTROLLER (self), GST_CLOCK_TIME_NONE);
g_return_val_if_fail (self->priv->control_rate != GST_CLOCK_TIME_NONE,
GST_CLOCK_TIME_NONE);
g_mutex_lock (self->lock);
/* TODO: Implement more logic, depending on interpolation mode
* and control points
* FIXME: we need playback direction
*/
ret = self->priv->last_sync + self->priv->control_rate;
g_mutex_unlock (self->lock);
return ret;
}
/**
* gst_controller_sync_values:
* @self: the controller that handles the values
* @timestamp: the time that should be processed
*
* Sets the properties of the element, according to the controller that (maybe)
* handles them and for the given timestamp.
*
* If this function fails, it is most likely the application developers fault.
* Most probably the control sources are not setup correctly.
*
* Returns: %TRUE if the controller values could be applied to the object
* properties, %FALSE otherwise
*/
gboolean
gst_controller_sync_values (GstController * self, GstClockTime timestamp)
{
GstControlledProperty *prop;
GList *node;
gboolean ret = TRUE, val_ret;
GValue value = { 0, };
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
g_return_val_if_fail (GST_CLOCK_TIME_IS_VALID (timestamp), FALSE);
GST_LOG ("sync_values");
g_mutex_lock (self->lock);
g_object_freeze_notify (self->object);
/* go over the controlled properties of the controller */
for (node = self->properties; node; node = g_list_next (node)) {
prop = node->data;
if (!prop->csource || prop->disabled)
continue;
GST_LOG ("property '%s' at ts=%" G_GUINT64_FORMAT, prop->name, timestamp);
/* we can make this faster
* http://bugzilla.gnome.org/show_bug.cgi?id=536939
*/
g_value_init (&value, G_PARAM_SPEC_VALUE_TYPE (prop->pspec));
val_ret = gst_control_source_get_value (prop->csource, timestamp, &value);
if (G_LIKELY (val_ret)) {
/* always set the value for first time, but then only if it changed
* this should limit g_object_notify invocations.
* FIXME: can we detect negative playback rates?
*/
if ((timestamp < self->priv->last_sync) ||
gst_value_compare (&value, &prop->last_value) != GST_VALUE_EQUAL) {
g_object_set_property (self->object, prop->name, &value);
g_value_copy (&value, &prop->last_value);
}
} else {
GST_DEBUG ("no control value for param %s", prop->name);
}
g_value_unset (&value);
ret &= val_ret;
}
self->priv->last_sync = timestamp;
g_object_thaw_notify (self->object);
g_mutex_unlock (self->lock);
return ret;
}
/**
* gst_controller_get_value_arrays:
* @self: the controller that handles the values
* @timestamp: the time that should be processed
* @value_arrays: list to return the control-values in
*
* Function to be able to get an array of values for one or more given element
* properties.
*
* All fields of the %GstValueArray in the list must be filled correctly.
* Especially the GstValueArray->values arrays must be big enough to keep
* the requested amount of values.
*
* The types of the values in the array are the same as the property's type.
*
* <note><para>This doesn't modify the controlled GObject properties!</para></note>
*
* Returns: %TRUE if the given array(s) could be filled, %FALSE otherwise
*/
gboolean
gst_controller_get_value_arrays (GstController * self,
GstClockTime timestamp, GSList * value_arrays)
{
gboolean res = TRUE;
GSList *node;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
g_return_val_if_fail (GST_CLOCK_TIME_IS_VALID (timestamp), FALSE);
g_return_val_if_fail (value_arrays, FALSE);
for (node = value_arrays; (res && node); node = g_slist_next (node)) {
res = gst_controller_get_value_array (self, timestamp, node->data);
}
return (res);
}
/**
* gst_controller_get_value_array:
* @self: the controller that handles the values
* @timestamp: the time that should be processed
* @value_array: array to put control-values in
*
* Function to be able to get an array of values for one element property.
*
* All fields of @value_array must be filled correctly. Especially the
* @value_array->values array must be big enough to keep the requested amount
* of values.
*
* The type of the values in the array is the same as the property's type.
*
* <note><para>This doesn't modify the controlled GObject property!</para></note>
*
* Returns: %TRUE if the given array could be filled, %FALSE otherwise
*/
gboolean
gst_controller_get_value_array (GstController * self, GstClockTime timestamp,
GstValueArray * value_array)
{
gboolean res = FALSE;
GstControlledProperty *prop;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
g_return_val_if_fail (GST_CLOCK_TIME_IS_VALID (timestamp), FALSE);
g_return_val_if_fail (value_array, FALSE);
g_return_val_if_fail (value_array->property_name, FALSE);
g_return_val_if_fail (value_array->values, FALSE);
g_mutex_lock (self->lock);
if ((prop =
gst_controller_find_controlled_property (self,
value_array->property_name))) {
/* get current value_array via control source */
if (!prop->csource)
goto out;
res =
gst_control_source_get_value_array (prop->csource, timestamp,
value_array);
}
out:
g_mutex_unlock (self->lock);
return res;
}
/* gobject handling */
static void
_gst_controller_get_property (GObject * object, guint property_id,
GValue * value, GParamSpec * pspec)
{
GstController *self = GST_CONTROLLER (object);
switch (property_id) {
case PROP_CONTROL_RATE:{
/* FIXME: don't change if element is playing, controller works for GObject
so this wont work
GstState c_state, p_state;
GstStateChangeReturn ret;
ret = gst_element_get_state (self->object, &c_state, &p_state, 0);
if ((ret == GST_STATE_CHANGE_SUCCESS &&
(c_state == GST_STATE_NULL || c_state == GST_STATE_READY)) ||
(ret == GST_STATE_CHANGE_ASYNC &&
(p_state == GST_STATE_NULL || p_state == GST_STATE_READY))) {
*/
g_value_set_uint64 (value, self->priv->control_rate);
/*
}
else {
GST_WARNING ("Changing the control rate is only allowed if the elemnt"
" is in NULL or READY");
}
*/
}
break;
default:{
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec);
}
break;
}
}
/* sets the given properties for this object */
static void
_gst_controller_set_property (GObject * object, guint property_id,
const GValue * value, GParamSpec * pspec)
{
GstController *self = GST_CONTROLLER (object);
switch (property_id) {
case PROP_CONTROL_RATE:{
self->priv->control_rate = g_value_get_uint64 (value);
}
break;
default:{
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec);
}
break;
}
}
static void
_gst_controller_dispose (GObject * object)
{
GstController *self = GST_CONTROLLER (object);
if (self->object != NULL) {
g_mutex_lock (self->lock);
/* free list of properties */
if (self->properties) {
GList *node;
for (node = self->properties; node; node = g_list_next (node)) {
GstControlledProperty *prop = node->data;
gst_controlled_property_free (prop);
}
g_list_free (self->properties);
self->properties = NULL;
}
/* remove controller from object's qdata list */
g_object_set_qdata (self->object, priv_gst_controller_key, NULL);
g_object_unref (self->object);
self->object = NULL;
g_mutex_unlock (self->lock);
}
if (G_OBJECT_CLASS (parent_class)->dispose)
(G_OBJECT_CLASS (parent_class)->dispose) (object);
}
static void
_gst_controller_finalize (GObject * object)
{
GstController *self = GST_CONTROLLER (object);
g_mutex_free (self->lock);
if (G_OBJECT_CLASS (parent_class)->finalize)
(G_OBJECT_CLASS (parent_class)->finalize) (object);
}
static void
_gst_controller_init (GTypeInstance * instance, gpointer g_class)
{
GstController *self = GST_CONTROLLER (instance);
self->lock = g_mutex_new ();
self->priv =
G_TYPE_INSTANCE_GET_PRIVATE (self, GST_TYPE_CONTROLLER,
GstControllerPrivate);
self->priv->last_sync = GST_CLOCK_TIME_NONE;
self->priv->control_rate = 100 * GST_MSECOND;
}
static void
_gst_controller_class_init (GstControllerClass * klass)
{
GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
parent_class = g_type_class_peek_parent (klass);
g_type_class_add_private (klass, sizeof (GstControllerPrivate));
gobject_class->set_property = _gst_controller_set_property;
gobject_class->get_property = _gst_controller_get_property;
gobject_class->dispose = _gst_controller_dispose;
gobject_class->finalize = _gst_controller_finalize;
priv_gst_controller_key = g_quark_from_static_string ("gst::controller");
/* register properties */
g_object_class_install_property (gobject_class, PROP_CONTROL_RATE,
g_param_spec_uint64 ("control-rate",
"control rate",
"Controlled properties will be updated at least every control-rate nanoseconds",
1, G_MAXUINT, 100 * GST_MSECOND,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
/* register signals */
/* set defaults for overridable methods */
}
GType
gst_controller_get_type (void)
{
static volatile gsize type = 0;
if (g_once_init_enter (&type)) {
GType _type;
static const GTypeInfo info = {
sizeof (GstControllerClass),
NULL, /* base_init */
NULL, /* base_finalize */
(GClassInitFunc) _gst_controller_class_init, /* class_init */
NULL, /* class_finalize */
NULL, /* class_data */
sizeof (GstController),
0, /* n_preallocs */
(GInstanceInitFunc) _gst_controller_init, /* instance_init */
NULL /* value_table */
};
_type = g_type_register_static (G_TYPE_OBJECT, "GstController", &info, 0);
g_once_init_leave (&type, _type);
}
return type;
}
/* FIXME: backward compatibility functions */
/*
* gst_controlled_property_set_interpolation_mode:
* @self: the controlled property object to change
* @mode: the new interpolation mode
*
* Sets the given Interpolation mode for the controlled property and activates
* the respective interpolation hooks.
*
* Deprecated: Use #GstControlSource, for example #GstInterpolationControlSource
* directly.
*
* Returns: %TRUE for success
*/
static gboolean
gst_controlled_property_set_interpolation_mode (GstControlledProperty * self,
GstInterpolateMode mode)
{
GstInterpolationControlSource *icsource;
/* FIXME: backward compat, add GstInterpolationControlSource */
if (!self->csource)
gst_controlled_property_add_interpolation_control_source (self);
g_return_val_if_fail (GST_IS_INTERPOLATION_CONTROL_SOURCE (self->csource),
FALSE);
icsource = GST_INTERPOLATION_CONTROL_SOURCE (self->csource);
return gst_interpolation_control_source_set_interpolation_mode (icsource,
mode);
}
/**
* gst_controller_set:
* @self: the controller object which handles the properties
* @property_name: the name of the property to set
* @timestamp: the time the control-change is schedules for
* @value: the control-value
*
* Set the value of given controller-handled property at a certain time.
*
* Deprecated: Use #GstControlSource, for example #GstInterpolationControlSource
* directly.
*
* Returns: FALSE if the values couldn't be set (ex : properties not handled by controller), TRUE otherwise
*/
#ifndef GST_REMOVE_DEPRECATED
#ifdef GST_DISABLE_DEPRECATED
gboolean
gst_controller_set (GstController * self, const gchar * property_name,
GstClockTime timestamp, GValue * value);
#endif
gboolean
gst_controller_set (GstController * self, const gchar * property_name,
GstClockTime timestamp, GValue * value)
{
gboolean res = FALSE;
GstControlledProperty *prop;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
g_return_val_if_fail (property_name, FALSE);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
/* FIXME: backward compat, add GstInterpolationControlSource */
if (!prop->csource)
gst_controlled_property_add_interpolation_control_source (prop);
if (!GST_IS_INTERPOLATION_CONTROL_SOURCE (prop->csource))
goto out;
res =
gst_interpolation_control_source_set (GST_INTERPOLATION_CONTROL_SOURCE
(prop->csource), timestamp, value);
}
out:
g_mutex_unlock (self->lock);
return res;
}
#endif
/**
* gst_controller_set_from_list:
* @self: the controller object which handles the properties
* @property_name: the name of the property to set
* @timedvalues: a list with #GstTimedValue items
*
* Sets multiple timed values at once.
*
* Deprecated: Use #GstControlSource, for example #GstInterpolationControlSource
* directly.
*
* Returns: %FALSE if the values couldn't be set (ex : properties not handled by controller), %TRUE otherwise
*/
#ifndef GST_REMOVE_DEPRECATED
#ifdef GST_DISABLE_DEPRECATED
gboolean
gst_controller_set_from_list (GstController * self, const gchar * property_name,
GSList * timedvalues);
#endif
gboolean
gst_controller_set_from_list (GstController * self, const gchar * property_name,
GSList * timedvalues)
{
gboolean res = FALSE;
GstControlledProperty *prop;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
g_return_val_if_fail (property_name, FALSE);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
/* FIXME: backward compat, add GstInterpolationControlSource */
if (!prop->csource)
gst_controlled_property_add_interpolation_control_source (prop);
if (!GST_IS_INTERPOLATION_CONTROL_SOURCE (prop->csource))
goto out;
res =
gst_interpolation_control_source_set_from_list
(GST_INTERPOLATION_CONTROL_SOURCE (prop->csource), timedvalues);
}
out:
g_mutex_unlock (self->lock);
return res;
}
#endif
/**
* gst_controller_unset:
* @self: the controller object which handles the properties
* @property_name: the name of the property to unset
* @timestamp: the time the control-change should be removed from
*
* Used to remove the value of given controller-handled property at a certain
* time.
*
* Deprecated: Use #GstControlSource, for example #GstInterpolationControlSource
* directly.
*
* Returns: %FALSE if the values couldn't be unset (ex : properties not handled by controller), %TRUE otherwise
*/
#ifndef GST_REMOVE_DEPRECATED
#ifdef GST_DISABLE_DEPRECATED
gboolean
gst_controller_unset (GstController * self, const gchar * property_name,
GstClockTime timestamp);
#endif
gboolean
gst_controller_unset (GstController * self, const gchar * property_name,
GstClockTime timestamp)
{
gboolean res = FALSE;
GstControlledProperty *prop;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
g_return_val_if_fail (property_name, FALSE);
g_return_val_if_fail (GST_CLOCK_TIME_IS_VALID (timestamp), FALSE);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
if (!prop->csource || !GST_IS_INTERPOLATION_CONTROL_SOURCE (prop->csource))
goto out;
res =
gst_interpolation_control_source_unset (GST_INTERPOLATION_CONTROL_SOURCE
(prop->csource), timestamp);
}
out:
g_mutex_unlock (self->lock);
return res;
}
#endif
/**
* gst_controller_unset_all:
* @self: the controller object which handles the properties
* @property_name: the name of the property to unset
*
* Used to remove all time-stamped values of given controller-handled property
*
* Deprecated: Use #GstControlSource, for example #GstInterpolationControlSource
* directly.
*
* Returns: %FALSE if the values couldn't be unset (ex : properties not handled
* by controller), %TRUE otherwise
* Since: 0.10.5
*/
#ifndef GST_REMOVE_DEPRECATED
#ifdef GST_DISABLE_DEPRECATED
gboolean gst_controller_unset_all (GstController * self, const gchar * property_name);
#endif
gboolean
gst_controller_unset_all (GstController * self, const gchar * property_name)
{
GstControlledProperty *prop;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
g_return_val_if_fail (property_name, FALSE);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
if (!prop->csource || !GST_IS_INTERPOLATION_CONTROL_SOURCE (prop->csource))
goto out;
gst_interpolation_control_source_unset_all (GST_INTERPOLATION_CONTROL_SOURCE
(prop->csource));
}
out:
g_mutex_unlock (self->lock);
return TRUE;
}
#endif
/**
* gst_controller_get_all:
* @self: the controller to get the list from
* @property_name: the name of the property to get the list for
*
* Returns a read-only copy of the list of #GstTimedValue for the given property.
* Free the list after done with it.
*
* <note><para>This doesn't modify the controlled GObject property!</para></note>
*
* Deprecated: Use #GstControlSource, for example #GstInterpolationControlSource
* directly.
*
* Returns: a copy of the list, or %NULL if the property isn't handled by the controller
*/
#ifndef GST_REMOVE_DEPRECATED
#ifdef GST_DISABLE_DEPRECATED
const GList *gst_controller_get_all (GstController * self,
const gchar * property_name);
#endif
const GList *
gst_controller_get_all (GstController * self, const gchar * property_name)
{
const GList *res = NULL;
GstControlledProperty *prop;
g_return_val_if_fail (GST_IS_CONTROLLER (self), NULL);
g_return_val_if_fail (property_name, NULL);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
if (!prop->csource || !GST_IS_INTERPOLATION_CONTROL_SOURCE (prop->csource))
goto out;
res =
gst_interpolation_control_source_get_all
(GST_INTERPOLATION_CONTROL_SOURCE (prop->csource));
}
out:
g_mutex_unlock (self->lock);
return res;
}
#endif
/**
* gst_controller_set_interpolation_mode:
* @self: the controller object
* @property_name: the name of the property for which to change the interpolation
* @mode: interpolation mode
*
* Sets the given interpolation mode on the given property.
*
* <note><para>User interpolation is not yet available and quadratic interpolation
* is deprecated and maps to cubic interpolation.</para></note>
*
* Deprecated: Use #GstControlSource, for example #GstInterpolationControlSource
* directly.
*
* Returns: %TRUE if the property is handled by the controller, %FALSE otherwise
*/
#ifndef GST_REMOVE_DEPRECATED
#ifdef GST_DISABLE_DEPRECATED
gboolean
gst_controller_set_interpolation_mode (GstController * self,
const gchar * property_name, GstInterpolateMode mode);
#endif
gboolean
gst_controller_set_interpolation_mode (GstController * self,
const gchar * property_name, GstInterpolateMode mode)
{
gboolean res = FALSE;
GstControlledProperty *prop;
g_return_val_if_fail (GST_IS_CONTROLLER (self), FALSE);
g_return_val_if_fail (property_name, FALSE);
g_mutex_lock (self->lock);
if ((prop = gst_controller_find_controlled_property (self, property_name))) {
res = gst_controlled_property_set_interpolation_mode (prop, mode);
}
g_mutex_unlock (self->lock);
return res;
}
#endif