gstreamer/tests/check/libs/basesrc.c
Wim Taymans cc8334905c Don't use gst_element_get_pad().
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_load_and_link):
* gst/gstutils.c: (gst_element_link_pads),
(gst_element_unlink_pads):
* libs/gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_teardown_src_pad), (gst_check_setup_sink_pad),
(gst_check_teardown_sink_pad),
(gst_check_element_push_buffer_list):
* tests/check/elements/fakesink.c: (GST_START_TEST):
* tests/check/elements/filesink.c:
* tests/check/elements/filesrc.c: (GST_START_TEST):
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(mq_sinkpad_to_srcpad):
* tests/check/elements/tee.c: (GST_START_TEST):
* tests/check/generic/sinks.c: (GST_START_TEST):
* tests/check/gst/gstbin.c: (GST_START_TEST):
* tests/check/gst/gstevent.c: (GST_START_TEST):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstpipeline.c: (GST_START_TEST):
* tests/check/gst/gstquery.c: (GST_START_TEST):
* tests/check/gst/gstutils.c: (GST_START_TEST):
* tests/check/libs/basesrc.c: (GST_START_TEST):
* tests/check/pipelines/parse-launch.c: (run_delayed_test),
(gst_parse_test_element_change_state):
Don't use gst_element_get_pad().
2008-05-21 15:57:52 +00:00

502 lines
15 KiB
C

/* GStreamer
*
* some unit tests for GstBaseSrc
*
* Copyright (C) 2006 Tim-Philipp Müller <tim centricular net>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <gst/gst.h>
#include <gst/check/gstcheck.h>
#include <gst/base/gstbasesrc.h>
static gboolean
eos_event_counter (GstObject * pad, GstEvent * event, guint * p_num_eos)
{
fail_unless (event != NULL);
fail_unless (GST_IS_EVENT (event));
if (GST_EVENT_TYPE (event) == GST_EVENT_EOS)
*p_num_eos += 1;
return TRUE;
}
/* basesrc_eos_events_push_live_op:
* - make sure source does send an EOS event when operating in push
* mode and being set to READY explicitly (like one might with
* live sources)
*/
GST_START_TEST (basesrc_eos_events_push_live_op)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", TRUE, NULL);
g_object_set (sink, "can-activate-pull", FALSE, NULL);
g_object_set (src, "can-activate-push", TRUE, NULL);
g_object_set (src, "can-activate-pull", FALSE, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_event_probe (srcpad,
G_CALLBACK (eos_event_counter), &num_eos);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
/* wait a second, then do controlled shutdown */
g_usleep (GST_USECOND * 1);
/* shut down source only (should send EOS event) ... */
gst_element_set_state (src, GST_STATE_NULL);
state_ret = gst_element_get_state (src, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
fail_unless (gst_element_set_locked_state (src, TRUE) == TRUE);
/* ... and wait for the EOS message from the sink */
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* should be exactly one EOS event */
fail_unless (num_eos == 1);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent a second one when going PAUSED => READY */
fail_unless (num_eos == 1);
gst_pad_remove_event_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_push:
* - make sure source only sends one EOS when operating in push-mode,
* reaching the max number of buffers, and is then shut down.
*/
GST_START_TEST (basesrc_eos_events_push)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", TRUE, NULL);
g_object_set (sink, "can-activate-pull", FALSE, NULL);
g_object_set (src, "can-activate-push", TRUE, NULL);
g_object_set (src, "can-activate-pull", FALSE, NULL);
g_object_set (src, "num-buffers", 8, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_event_probe (srcpad,
G_CALLBACK (eos_event_counter), &num_eos);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* should be exactly one EOS event */
fail_unless (num_eos == 1);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent a second one when going PAUSED => READY */
fail_unless (num_eos == 1);
gst_pad_remove_event_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_pull_live_op:
* - make sure source doesn't send an EOS event when operating in
* pull mode and being set to READY explicitly (like one might with
* live sources)
*/
GST_START_TEST (basesrc_eos_events_pull_live_op)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstPad *srcpad;
guint probe, num_eos = 0;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", FALSE, NULL);
g_object_set (sink, "can-activate-pull", TRUE, NULL);
g_object_set (src, "can-activate-push", FALSE, NULL);
g_object_set (src, "can-activate-pull", TRUE, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_event_probe (srcpad,
G_CALLBACK (eos_event_counter), &num_eos);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
/* wait a second, then do controlled shutdown */
g_usleep (GST_USECOND * 1);
/* shut down source only ... */
gst_element_set_state (src, GST_STATE_NULL);
state_ret = gst_element_get_state (src, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
fail_unless (gst_element_set_locked_state (src, TRUE) == TRUE);
/* source shouldn't have sent any EOS event in pull mode */
fail_unless (num_eos == 0);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent an EOS when going PAUSED => READY either */
fail_unless (num_eos == 0);
gst_pad_remove_event_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_pull:
* - makes sure source doesn't send EOS event when reaching the max.
* number of buffers configured in pull-mode
* - make sure source doesn't send EOS event either when being shut down
* (PAUSED => READY state change) after EOSing in pull mode
*/
GST_START_TEST (basesrc_eos_events_pull)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", FALSE, NULL);
g_object_set (sink, "can-activate-pull", TRUE, NULL);
g_object_set (src, "can-activate-push", FALSE, NULL);
g_object_set (src, "can-activate-pull", TRUE, NULL);
g_object_set (src, "num-buffers", 8, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_event_probe (srcpad,
G_CALLBACK (eos_event_counter), &num_eos);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* source shouldn't have sent any EOS event in pull mode */
fail_unless (num_eos == 0);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent an EOS when going PAUSED => READY either */
fail_unless (num_eos == 0);
gst_pad_remove_event_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_push_live_eos:
* - make sure the source stops and emits EOS when we send an EOS event to the
* pipeline.
*/
GST_START_TEST (basesrc_eos_events_push_live_eos)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
gboolean res;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", TRUE, NULL);
g_object_set (sink, "can-activate-pull", FALSE, NULL);
g_object_set (src, "can-activate-push", TRUE, NULL);
g_object_set (src, "can-activate-pull", FALSE, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_event_probe (srcpad,
G_CALLBACK (eos_event_counter), &num_eos);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
/* wait a second, then emit the EOS */
g_usleep (GST_USECOND * 1);
/* shut down source only (should send EOS event) ... */
res = gst_element_send_event (pipe, gst_event_new_eos ());
fail_unless (res == TRUE);
/* ... and wait for the EOS message from the sink */
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* should be exactly one EOS event */
fail_unless (num_eos == 1);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent a second one when going PAUSED => READY */
fail_unless (num_eos == 1);
gst_pad_remove_event_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
/* basesrc_eos_events_pull_live_eos:
* - make sure the source stops and emits EOS when we send an EOS event to the
* pipeline.
*/
GST_START_TEST (basesrc_eos_events_pull_live_eos)
{
GstStateChangeReturn state_ret;
GstElement *src, *sink, *pipe;
GstMessage *msg;
GstBus *bus;
GstPad *srcpad;
guint probe, num_eos = 0;
gboolean res;
pipe = gst_pipeline_new ("pipeline");
sink = gst_element_factory_make ("fakesink", "sink");
src = gst_element_factory_make ("fakesrc", "src");
g_assert (pipe != NULL);
g_assert (sink != NULL);
g_assert (src != NULL);
fail_unless (gst_bin_add (GST_BIN (pipe), src) == TRUE);
fail_unless (gst_bin_add (GST_BIN (pipe), sink) == TRUE);
fail_unless (gst_element_link (src, sink) == TRUE);
g_object_set (sink, "can-activate-push", FALSE, NULL);
g_object_set (sink, "can-activate-pull", TRUE, NULL);
g_object_set (src, "can-activate-push", FALSE, NULL);
g_object_set (src, "can-activate-pull", TRUE, NULL);
/* set up event probe to count EOS events */
srcpad = gst_element_get_static_pad (src, "src");
fail_unless (srcpad != NULL);
probe = gst_pad_add_event_probe (srcpad,
G_CALLBACK (eos_event_counter), &num_eos);
bus = gst_element_get_bus (pipe);
gst_element_set_state (pipe, GST_STATE_PLAYING);
state_ret = gst_element_get_state (pipe, NULL, NULL, -1);
fail_unless (state_ret == GST_STATE_CHANGE_SUCCESS);
/* wait a second, then emit the EOS */
g_usleep (GST_USECOND * 1);
/* shut down source only (should send EOS event) ... */
res = gst_element_send_event (pipe, gst_event_new_eos ());
fail_unless (res == TRUE);
/* ... and wait for the EOS message from the sink */
msg = gst_bus_poll (bus, GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_unless (msg != NULL);
fail_unless (GST_MESSAGE_TYPE (msg) != GST_MESSAGE_ERROR);
fail_unless (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_EOS);
/* no EOS in pull mode */
fail_unless (num_eos == 0);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_element_get_state (pipe, NULL, NULL, -1);
/* make sure source hasn't sent a second one when going PAUSED => READY */
fail_unless (num_eos == 0);
gst_pad_remove_event_probe (srcpad, probe);
gst_object_unref (srcpad);
gst_message_unref (msg);
gst_object_unref (bus);
gst_object_unref (pipe);
}
GST_END_TEST;
static Suite *
gst_basesrc_suite (void)
{
Suite *s = suite_create ("GstBaseSrc");
TCase *tc = tcase_create ("general");
suite_add_tcase (s, tc);
tcase_add_test (tc, basesrc_eos_events_pull);
tcase_add_test (tc, basesrc_eos_events_push);
tcase_add_test (tc, basesrc_eos_events_push_live_op);
tcase_add_test (tc, basesrc_eos_events_pull_live_op);
tcase_add_test (tc, basesrc_eos_events_push_live_eos);
tcase_add_test (tc, basesrc_eos_events_pull_live_eos);
return s;
}
GST_CHECK_MAIN (gst_basesrc);