gstreamer/docs/pwg/other-source.xml
Tim-Philipp Müller bce6eeb204 docs/pwg/: Update state change stuff for 0.10 (fixes ).
Original commit message from CVS:
* docs/pwg/building-chainfn.xml:
* docs/pwg/building-pads.xml:
* docs/pwg/building-state.xml:
* docs/pwg/other-source.xml:
Update state change stuff for 0.10 (fixes ).
2005-12-11 18:24:27 +00:00

474 lines
14 KiB
XML

<!-- ############ chapter ############# -->
<chapter id="chapter-other-source" xreflabel="Writing a Source">
<title>Writing a Source</title>
<para>
Source elements are the start of a data streaming pipeline. Source
elements have no sink pads and have one or more source pads. We will
focus on single-sourcepad elements here, but the concepts apply equally
well to multi-sourcepad elements. This chapter will explain the essentials
of source elements, which features it should implement and which it
doesn't have to, and how source elements will interact with other
elements in a pipeline.
</para>
<sect1 id="section-source-getfn" xreflabel="The get()-function">
<title>The get()-function</title>
<para>
Source elements have the special option of having a
<function>_get ()</function>-function rather than a
<function>_loop ()</function>- or <function>_chain
()</function>-function. A <function>_get ()</function>-function is
called by the scheduler every time the next elements needs data. Apart
from corner cases, every source element will want to be <function>_get
()</function>-based.
</para>
<programlisting>
static GstData * gst_my_source_get (GstPad *pad);
static void
gst_my_source_init (GstMySource *src)
{
[..]
gst_pad_set_get_function (src->srcpad, gst_my_source_get);
}
static GstData *
gst_my_source_get (GstPad *pad)
{
GstBuffer *buffer;
buffer = gst_buffer_new ();
GST_BUFFER_DATA (buf) = g_strdup ("hello pipeline!");
GST_BUFFER_SIZE (buf) = strlen (GST_BUFFER_DATA (buf));
/* terminating '/0' */
GST_BUFFER_MAZSIZE (buf) = GST_BUFFER_SIZE (buf) + 1;
return GST_DATA (buffer);
}
</programlisting>
</sect1>
<sect1 id="section-source-padfn" xreflabel="Events, querying and converting">
<title>Events, querying and converting</title>
<para>
One of the most important functions of source elements is to
implement correct query, convert and event handling functions.
Those will continuously describe the current state of the stream.
Query functions can be used to get stream properties such as current
position and length. This can be used by fellow elements to convert
this same value into a different unit, or by appliations to provide
information about the length/position of the stream to the user.
Conversion functions are used to convert such values from one unit
to another. Lastly, events are mostly used to seek to positions
inside the stream. Any function is essentially optional, but the
element should try to provide as much information as it knows. Note
that elements providing an event function should also list their
supported events in an <function>_get_event_mask ()</function>
function. Elements supporting query operations should list the
supported operations in a <function>_get_query_types
()</function> function. Elements supporting either conversion
or query operations should also implement a <function>_get_formats
()</function> function.
</para>
<para>
An example source element could, for example, be an element that
continuously generates a wave tone at 44,1 kHz, mono, 16-bit. This
element will generate 44100 audio samples per second or 88,2 kB/s.
This information can be used to implement such functions:
</para>
<programlisting>
static GstFormat * gst_my_source_format_list (GstPad *pad);
static GstQueryType * gst_my_source_query_list (GstPad *pad);
static gboolean gst_my_source_convert (GstPad *pad,
GstFormat from_fmt,
gint64 from_val,
GstFormat *to_fmt,
gint64 *to_val);
static gboolean gst_my_source_query (GstPad *pad,
GstQueryType type,
GstFormat *to_fmt,
gint64 *to_val);
static void
gst_my_source_init (GstMySource *src)
{
[..]
gst_pad_set_convert_function (src->srcpad, gst_my_source_convert);
gst_pad_set_formats_function (src->srcpad, gst_my_source_format_list);
gst_pad_set_query_function (src->srcpad, gst_my_source_query);
gst_pad_set_query_type_function (src->srcpad, gst_my_source_query_list);
}
/*
* This function returns an enumeration of supported GstFormat
* types in the query() or convert() functions. See gst/gstformat.h
* for a full list.
*/
static GstFormat *
gst_my_source_format_list (GstPad *pad)
{
static const GstFormat formats[] = {
GST_FORMAT_TIME,
GST_FORMAT_DEFAULT, /* means "audio samples" */
GST_FORMAT_BYTES,
0
};
return formats;
}
/*
* This function returns an enumeration of the supported query()
* operations. Since we generate audio internally, we only provide
* an indication of how many samples we've played so far. File sources
* or such elements could also provide GST_QUERY_TOTAL for the total
* stream length, or other things. See gst/gstquery.h for details.
*/
static GstQueryType *
gst_my_source_query_list (GstPad *pad)
{
static const GstQueryType query_types[] = {
GST_QUERY_POSITION,
0,
};
return query_types;
}
/*
* And below are the logical implementations.
*/
static gboolean
gst_my_source_convert (GstPad *pad,
GstFormat from_fmt,
gint64 from_val,
GstFormat *to_fmt,
gint64 *to_val)
{
gboolean res = TRUE;
GstMySource *src = GST_MY_SOURCE (gst_pad_get_parent (pad));
switch (from_fmt) {
case GST_FORMAT_TIME:
switch (*to_fmt) {
case GST_FORMAT_TIME:
/* nothing */
break;
case GST_FORMAT_BYTES:
*to_val = from_val / (GST_SECOND / (44100 * 2));
break;
case GST_FORMAT_DEFAULT:
*to_val = from_val / (GST_SECOND / 44100);
break;
default:
res = FALSE;
break;
}
break;
case GST_FORMAT_BYTES:
switch (*to_fmt) {
case GST_FORMAT_TIME:
*to_val = from_val * (GST_SECOND / (44100 * 2));
break;
case GST_FORMAT_BYTES:
/* nothing */
break;
case GST_FORMAT_DEFAULT:
*to_val = from_val / 2;
break;
default:
res = FALSE;
break;
}
break;
case GST_FORMAT_DEFAULT:
switch (*to_fmt) {
case GST_FORMAT_TIME:
*to_val = from_val * (GST_SECOND / 44100);
break;
case GST_FORMAT_BYTES:
*to_val = from_val * 2;
break;
case GST_FORMAT_DEFAULT:
/* nothing */
break;
default:
res = FALSE;
break;
}
break;
default:
res = FALSE;
break;
}
return res;
}
static gboolean
gst_my_source_query (GstPad *pad,
GstQueryType type,
GstFormat *to_fmt,
gint64 *to_val)
{
GstMySource *src = GST_MY_SOURCE (gst_pad_get_parent (pad));
gboolean res = TRUE;
switch (type) {
case GST_QUERY_POSITION:
res = gst_pad_convert (pad, GST_FORMAT_BYTES, src->total_bytes,
to_fmt, to_val);
break;
default:
res = FALSE;
break;
}
return res;
}
</programlisting>
<para>
Be sure to increase src->total_bytes after each call to your
<function>_get ()</function> function.
</para>
<para>
Event handling has already been explained previously in the events
chapter.
</para>
</sect1>
<sect1 id="section-source-sync" xreflabel="Time, clocking and synchronization">
<title>Time, clocking and synchronization</title>
<para>
The above example does not provide any timing info, but will suffice
for elementary data sources such as a file source or network data
source element. Things become slightly more complicated, but still
very simple, if we create artificial video or audio data sources,
such as a video test image source or an artificial audio source (e.g.
<classname>audiotestsrc</classname>).
It will become more complicated if we want the element to be a
realtime capture source, such as a video4linux source (for reading
video frames from a TV card) or an ALSA source (for reading data
from soundcards supported by an ALSA-driver). Here, we will need to
make the element aware of timing and clocking.
</para>
<para>
Timestamps can essentially be generated from all the information
given above without any difficulty. We could add a very small amount
of code to generate perfectly timestamped buffers from our
<function>_get ()</function>-function:
</para>
<programlisting>
static void
gst_my_source_init (GstMySource *src)
{
[..]
src->total_bytes = 0;
}
static GstData *
gst_my_source_get (GstPad *pad)
{
GstMySource *src = GST_MY_SOURCE (gst_pad_get_parent (pad));
GstBuffer *buf;
GstFormat fmt = GST_FORMAT_TIME;
[..]
GST_BUFFER_DURATION (buf) = GST_BUFFER_SIZE (buf) * (GST_SECOND / (44100 * 2));
GST_BUFFER_TIMESTAMP (buf) = src->total_bytes * (GST_SECOND / (44100 * 2));
src->total_bytes += GST_BUFFER_SIZE (buf);
return GST_DATA (buf);
}
static GstStateChangeReturn
gst_my_source_change_state (GstElement *element, GstStateChange transition)
{
GstStateChangeReturn ret = GST_STATE_CHANGE_SUCCESS;
GstMySource *src = GST_MY_SOURCE (element);
/* First, handle upwards state changes */
switch (transition) {
case GST_STATE_READY_TO_PAUSED:
/* do something */
break;
default:
break;
}
ret = GST_ELEMENT_CLASS (parent_class)-&gt;change_state (element, transition);
if (ret == GST_STATE_CHANGE_FAILURE)
return ret;
/* Now handle downwards state changes after chaining up */
switch (transition) {
case GST_STATE_PAUSED_TO_READY:
src->total_bytes = 0;
break;
default:
break;
}
return ret;
}
</programlisting>
<para>
That wasn't too hard. Now, let's assume real-time elements. Those
can either have hardware-timing, in which case we can rely on backends
to provide sync for us (in which case you probably want to provide a
clock), or we will have to emulate that internally (e.g. to acquire
sync in artificial data elements such as
<classname>audiotestsrc</classname>).
Let's first look at the second option (software sync). The first option
(hardware sync + providing a clock) does not require any special code
with respect to timing, and the clocking section already explained how
to provide a clock.
</para>
<programlisting>
enum {
ARG_0,
[..]
ARG_SYNC,
[..]
};
static void
gst_my_source_class_init (GstMySourceClass *klass)
{
GObjectClass *object_class = G_OBJECT_CLASS (klass);
[..]
g_object_class_install_property (object_class, ARG_SYNC,
g_param_spec_boolean ("sync", "Sync", "Synchronize to clock",
FALSE, G_PARAM_READWRITE));
[..]
}
static void
gst_my_source_init (GstMySource *src)
{
[..]
src->sync = FALSE;
}
static GstData *
gst_my_source_get (GstPad *pad)
{
GstMySource *src = GST_MY_SOURCE (gst_pad_get_parent (pad));
GstBuffer *buf;
[..]
if (src->sync) {
/* wait on clock */
gst_element_wait (GST_ELEMENT (src), GST_BUFFER_TIMESTAMP (buf));
}
return GST_DATA (buf);
}
static void
gst_my_source_get_property (GObject *object,
guint prop_id,
GParamSpec *pspec,
GValue *value)
{
GstMySource *src = GST_MY_SOURCE (gst_pad_get_parent (pad));
switch (prop_id) {
[..]
case ARG_SYNC:
g_value_set_boolean (value, src->sync);
break;
[..]
}
}
static void
gst_my_source_get_property (GObject *object,
guint prop_id,
GParamSpec *pspec,
const GValue *value)
{
GstMySource *src = GST_MY_SOURCE (gst_pad_get_parent (pad));
switch (prop_id) {
[..]
case ARG_SYNC:
src->sync = g_value_get_boolean (value);
break;
[..]
}
}
</programlisting>
<para>
Most of this is GObject wrapping code. The actual code to do
software-sync (in the <function>_get ()</function>-function)
is relatively small.
</para>
</sect1>
<sect1 id="section-source-buffers" xreflabel="Using special memory">
<title>Using special memory</title>
<para>
In some cases, it might be useful to use specially allocated memory
(e.g. <function>mmap ()</function>'ed DMA'able memory) in
your buffers, and those will require special handling when they are
being dereferenced. For this, &GStreamer; uses the concept of
buffer-free functions. Those are special functions pointers that an
element can set on buffers that it created itself. The given function
will be called when the buffer has been dereferenced, so that the
element can clean up or re-use memory internally rather than using
the default implementation (which simply calls
<function>g_free ()</function> on the data pointer).
</para>
<programlisting>
static void
gst_my_source_buffer_free (GstBuffer *buf)
{
GstMySource *src = GST_MY_SOURCE (GST_BUFFER_PRIVATE (buf));
/* do useful things here, like re-queueing the buffer which
* makes it available for DMA again. The default handler will
* not free this buffer because of the GST_BUFFER_DONTFREE
* flag. */
}
static GstData *
gst_my_source_get (GstPad *pad)
{
GstMySource *src = GST_MY_SOURCE (gst_pad_get_parent (pad));
GstBuffer *buf;
[..]
buf = gst_buffer_new ();
GST_BUFFER_FREE_DATA_FUNC (buf) = gst_my_source_buffer_free;
GST_BUFFER_PRIVATE (buf) = src;
GST_BUFFER_FLAG_SET (buf, GST_BUFFER_READONLY | GST_BUFFER_DONTFREE);
[..]
return GST_DATA (buf);
}
</programlisting>
<para>
Note that this concept should <emphasis>not</emphasis> be used to
decrease the number of calls made to functions such as
<function>g_malloc ()</function> inside your element. We
have better ways of doing that elsewhere (&GStreamer; core, Glib,
Glibc, Linux kernel, etc.).
</para>
</sect1>
</chapter>