gstreamer/libs/gst/base/gstadapter.c
Mark Nauwelaerts 7e23719a74 adapter: optimize progressive masked_scan
Retain the last scanned buffer entry and offset, so we can resume buffer
scanning there in case of a typical progressive scan.
Also potentially optimize _copy subsequently occurring in that area.
2010-06-14 15:09:59 +02:00

919 lines
28 KiB
C

/* GStreamer
* Copyright (C) 2004 Benjamin Otte <otte@gnome.org>
* 2005 Wim Taymans <wim@fluendo.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
/**
* SECTION:gstadapter
* @short_description: adapts incoming data on a sink pad into chunks of N bytes
*
* This class is for elements that receive buffers in an undesired size.
* While for example raw video contains one image per buffer, the same is not
* true for a lot of other formats, especially those that come directly from
* a file. So if you have undefined buffer sizes and require a specific size,
* this object is for you.
*
* An adapter is created with gst_adapter_new(). It can be freed again with
* g_object_unref().
*
* The theory of operation is like this: All buffers received are put
* into the adapter using gst_adapter_push() and the data is then read back
* in chunks of the desired size using gst_adapter_peek(). After the data is
* processed, it is freed using gst_adapter_flush().
*
* Other methods such as gst_adapter_take() and gst_adapter_take_buffer()
* combine gst_adapter_peek() and gst_adapter_flush() in one method and are
* potentially more convenient for some use cases.
*
* For example, a sink pad's chain function that needs to pass data to a library
* in 512-byte chunks could be implemented like this:
* <programlisting>
* static GstFlowReturn
* sink_pad_chain (GstPad *pad, GstBuffer *buffer)
* {
* MyElement *this;
* GstAdapter *adapter;
* GstFlowReturn ret = GST_FLOW_OK;
*
* // will give the element an extra ref; remember to drop it
* this = MY_ELEMENT (gst_pad_get_parent (pad));
* adapter = this->adapter;
*
* // put buffer into adapter
* gst_adapter_push (adapter, buffer);
* // while we can read out 512 bytes, process them
* while (gst_adapter_available (adapter) >= 512 && ret == GST_FLOW_OK) {
* // use flowreturn as an error value
* ret = my_library_foo (gst_adapter_peek (adapter, 512));
* gst_adapter_flush (adapter, 512);
* }
*
* gst_object_unref (this);
* return ret;
* }
* </programlisting>
* For another example, a simple element inside GStreamer that uses GstAdapter
* is the libvisual element.
*
* An element using GstAdapter in its sink pad chain function should ensure that
* when the FLUSH_STOP event is received, that any queued data is cleared using
* gst_adapter_clear(). Data should also be cleared or processed on EOS and
* when changing state from #GST_STATE_PAUSED to #GST_STATE_READY.
*
* Also check the GST_BUFFER_FLAG_DISCONT flag on the buffer. Some elements might
* need to clear the adapter after a discontinuity.
*
* Since 0.10.24, the adapter will keep track of the timestamps of the buffers
* that were pushed. The last seen timestamp before the current position
* can be queried with gst_adapter_prev_timestamp(). This function can
* optionally return the amount of bytes between the start of the buffer that
* carried the timestamp and the current adapter position. The distance is
* useful when dealing with, for example, raw audio samples because it allows
* you to calculate the timestamp of the current adapter position by using the
* last seen timestamp and the amount of bytes since.
*
* A last thing to note is that while GstAdapter is pretty optimized,
* merging buffers still might be an operation that requires a malloc() and
* memcpy() operation, and these operations are not the fastest. Because of
* this, some functions like gst_adapter_available_fast() are provided to help
* speed up such cases should you want to. To avoid repeated memory allocations,
* gst_adapter_copy() can be used to copy data into a (statically allocated)
* user provided buffer.
*
* GstAdapter is not MT safe. All operations on an adapter must be serialized by
* the caller. This is not normally a problem, however, as the normal use case
* of GstAdapter is inside one pad's chain function, in which case access is
* serialized via the pad's STREAM_LOCK.
*
* Note that gst_adapter_push() takes ownership of the buffer passed. Use
* gst_buffer_ref() before pushing it into the adapter if you still want to
* access the buffer later. The adapter will never modify the data in the
* buffer pushed in it.
*
* Last reviewed on 2009-05-13 (0.10.24).
*/
#include <gst/gst_private.h>
#include "gstadapter.h"
#include <string.h>
/* default size for the assembled data buffer */
#define DEFAULT_SIZE 4096
GST_DEBUG_CATEGORY_STATIC (gst_adapter_debug);
#define GST_CAT_DEFAULT gst_adapter_debug
#define GST_ADAPTER_GET_PRIVATE(obj) \
(G_TYPE_INSTANCE_GET_PRIVATE ((obj), GST_TYPE_ADAPTER, GstAdapterPrivate))
struct _GstAdapterPrivate
{
GstClockTime timestamp;
guint64 distance;
guint scan_offset;
GSList *scan_entry;
};
#define _do_init(thing) \
GST_DEBUG_CATEGORY_INIT (gst_adapter_debug, "adapter", 0, "object to splice and merge buffers to desired size")
GST_BOILERPLATE_FULL (GstAdapter, gst_adapter, GObject, G_TYPE_OBJECT,
_do_init);
static void gst_adapter_dispose (GObject * object);
static void gst_adapter_finalize (GObject * object);
static void
gst_adapter_base_init (gpointer g_class)
{
/* nop */
}
static void
gst_adapter_class_init (GstAdapterClass * klass)
{
GObjectClass *object = G_OBJECT_CLASS (klass);
g_type_class_add_private (klass, sizeof (GstAdapterPrivate));
object->dispose = gst_adapter_dispose;
object->finalize = gst_adapter_finalize;
}
static void
gst_adapter_init (GstAdapter * adapter, GstAdapterClass * g_class)
{
adapter->priv = GST_ADAPTER_GET_PRIVATE (adapter);
adapter->assembled_data = g_malloc (DEFAULT_SIZE);
adapter->assembled_size = DEFAULT_SIZE;
adapter->priv->timestamp = GST_CLOCK_TIME_NONE;
adapter->priv->distance = 0;
}
static void
gst_adapter_dispose (GObject * object)
{
GstAdapter *adapter = GST_ADAPTER (object);
gst_adapter_clear (adapter);
GST_CALL_PARENT (G_OBJECT_CLASS, dispose, (object));
}
static void
gst_adapter_finalize (GObject * object)
{
GstAdapter *adapter = GST_ADAPTER (object);
g_free (adapter->assembled_data);
GST_CALL_PARENT (G_OBJECT_CLASS, finalize, (object));
}
/**
* gst_adapter_new:
*
* Creates a new #GstAdapter. Free with g_object_unref().
*
* Returns: a new #GstAdapter
*/
GstAdapter *
gst_adapter_new (void)
{
return g_object_newv (GST_TYPE_ADAPTER, 0, NULL);
}
/**
* gst_adapter_clear:
* @adapter: a #GstAdapter
*
* Removes all buffers from @adapter.
*/
void
gst_adapter_clear (GstAdapter * adapter)
{
g_return_if_fail (GST_IS_ADAPTER (adapter));
g_slist_foreach (adapter->buflist, (GFunc) gst_mini_object_unref, NULL);
g_slist_free (adapter->buflist);
adapter->buflist = NULL;
adapter->buflist_end = NULL;
adapter->size = 0;
adapter->skip = 0;
adapter->assembled_len = 0;
adapter->priv->timestamp = GST_CLOCK_TIME_NONE;
adapter->priv->distance = 0;
adapter->priv->scan_offset = 0;
adapter->priv->scan_entry = NULL;
}
static inline void
update_timestamp (GstAdapter * adapter, GstBuffer * buf)
{
GstClockTime timestamp;
timestamp = GST_BUFFER_TIMESTAMP (buf);
if (GST_CLOCK_TIME_IS_VALID (timestamp)) {
GST_LOG_OBJECT (adapter, "new timestamp %" GST_TIME_FORMAT,
GST_TIME_ARGS (timestamp));
adapter->priv->timestamp = timestamp;
adapter->priv->distance = 0;
}
}
/* copy data into @dest, skipping @skip bytes from the head buffers */
static void
copy_into_unchecked (GstAdapter * adapter, guint8 * dest, guint skip,
guint size)
{
GSList *g;
GstBuffer *buf;
guint bsize, csize;
/* first step, do skipping */
/* we might well be copying where we were scanning */
if (adapter->priv->scan_entry && (adapter->priv->scan_offset <= skip)) {
g = adapter->priv->scan_entry;
skip -= adapter->priv->scan_offset;
} else {
g = adapter->buflist;
}
buf = g->data;
bsize = GST_BUFFER_SIZE (buf);
while (G_UNLIKELY (skip >= bsize)) {
skip -= bsize;
g = g_slist_next (g);
buf = g->data;
bsize = GST_BUFFER_SIZE (buf);
}
/* copy partial buffer */
csize = MIN (bsize - skip, size);
memcpy (dest, GST_BUFFER_DATA (buf) + skip, csize);
size -= csize;
dest += csize;
/* second step, copy remainder */
while (size > 0) {
g = g_slist_next (g);
buf = g->data;
csize = MIN (GST_BUFFER_SIZE (buf), size);
memcpy (dest, GST_BUFFER_DATA (buf), csize);
size -= csize;
dest += csize;
}
}
/**
* gst_adapter_push:
* @adapter: a #GstAdapter
* @buf: a #GstBuffer to add to queue in the adapter
*
* Adds the data from @buf to the data stored inside @adapter and takes
* ownership of the buffer.
* Empty buffers will be automatically dereferenced and not stored in the
* @adapter.
*/
void
gst_adapter_push (GstAdapter * adapter, GstBuffer * buf)
{
guint size;
g_return_if_fail (GST_IS_ADAPTER (adapter));
g_return_if_fail (GST_IS_BUFFER (buf));
size = GST_BUFFER_SIZE (buf);
if (G_UNLIKELY (size == 0)) {
/* we can't have empty buffers, several parts in this file rely on it, this
* has some problems for the timestamp tracking. */
GST_LOG_OBJECT (adapter, "discarding empty buffer");
gst_buffer_unref (buf);
} else {
adapter->size += size;
/* Note: merging buffers at this point is premature. */
if (G_UNLIKELY (adapter->buflist == NULL)) {
GST_LOG_OBJECT (adapter, "pushing first %u bytes", size);
adapter->buflist = adapter->buflist_end = g_slist_append (NULL, buf);
update_timestamp (adapter, buf);
} else {
/* Otherwise append to the end, and advance our end pointer */
GST_LOG_OBJECT (adapter, "pushing %u bytes at end, size now %u", size,
adapter->size);
adapter->buflist_end = g_slist_append (adapter->buflist_end, buf);
adapter->buflist_end = g_slist_next (adapter->buflist_end);
}
}
}
/* Internal method only. Tries to merge buffers at the head of the queue
* to form a single larger buffer of size 'size'. Only merges buffers that
* where 'gst_buffer_is_span_fast' returns TRUE.
*
* Returns TRUE if it managed to merge anything.
*/
static gboolean
gst_adapter_try_to_merge_up (GstAdapter * adapter, guint size)
{
GstBuffer *cur, *head;
GSList *g;
gboolean ret = FALSE;
g = adapter->buflist;
if (g == NULL)
return FALSE;
head = g->data;
g = g_slist_next (g);
/* How large do we want our head buffer? The requested size, plus whatever's
* been skipped already */
size += adapter->skip;
while (g != NULL && GST_BUFFER_SIZE (head) < size) {
cur = g->data;
if (!gst_buffer_is_span_fast (head, cur))
return ret;
/* Merge the head buffer and the next in line */
GST_LOG_OBJECT (adapter,
"Merging buffers of size %u & %u in search of target %u",
GST_BUFFER_SIZE (head), GST_BUFFER_SIZE (cur), size);
head = gst_buffer_join (head, cur);
ret = TRUE;
/* Delete the front list item, and store our new buffer in the 2nd list
* item */
adapter->buflist = g_slist_delete_link (adapter->buflist, adapter->buflist);
g->data = head;
/* invalidate scan position */
adapter->priv->scan_offset = 0;
adapter->priv->scan_entry = NULL;
g = g_slist_next (g);
}
return ret;
}
/**
* gst_adapter_peek:
* @adapter: a #GstAdapter
* @size: the number of bytes to peek
*
* Gets the first @size bytes stored in the @adapter. The returned pointer is
* valid until the next function is called on the adapter.
*
* Note that setting the returned pointer as the data of a #GstBuffer is
* incorrect for general-purpose plugins. The reason is that if a downstream
* element stores the buffer so that it has access to it outside of the bounds
* of its chain function, the buffer will have an invalid data pointer after
* your element flushes the bytes. In that case you should use
* gst_adapter_take(), which returns a freshly-allocated buffer that you can set
* as #GstBuffer malloc_data or the potentially more performant
* gst_adapter_take_buffer().
*
* Returns #NULL if @size bytes are not available.
*
* Returns: a pointer to the first @size bytes of data, or NULL.
*/
const guint8 *
gst_adapter_peek (GstAdapter * adapter, guint size)
{
GstBuffer *cur;
guint skip;
g_return_val_if_fail (GST_IS_ADAPTER (adapter), NULL);
g_return_val_if_fail (size > 0, NULL);
/* we don't have enough data, return NULL. This is unlikely
* as one usually does an _available() first instead of peeking a
* random size. */
if (G_UNLIKELY (size > adapter->size))
return NULL;
/* we have enough assembled data, return it */
if (adapter->assembled_len >= size)
return adapter->assembled_data;
/* our head buffer has enough data left, return it */
cur = adapter->buflist->data;
skip = adapter->skip;
if (GST_BUFFER_SIZE (cur) >= size + skip)
return GST_BUFFER_DATA (cur) + skip;
/* We may be able to efficiently merge buffers in our pool to
* gather a big enough chunk to return it from the head buffer directly */
if (gst_adapter_try_to_merge_up (adapter, size)) {
/* Merged something! Check if there's enough avail now */
cur = adapter->buflist->data;
if (GST_BUFFER_SIZE (cur) >= size + skip)
return GST_BUFFER_DATA (cur) + skip;
}
/* Gonna need to copy stuff out */
if (G_UNLIKELY (adapter->assembled_size < size)) {
adapter->assembled_size = (size / DEFAULT_SIZE + 1) * DEFAULT_SIZE;
GST_DEBUG_OBJECT (adapter, "resizing internal buffer to %u",
adapter->assembled_size);
/* no g_realloc to avoid a memcpy that is not desired here since we are
* going to copy new data into the area below */
g_free (adapter->assembled_data);
adapter->assembled_data = g_malloc (adapter->assembled_size);
}
adapter->assembled_len = size;
GST_CAT_DEBUG (GST_CAT_PERFORMANCE, "copy data from adapter");
copy_into_unchecked (adapter, adapter->assembled_data, skip, size);
return adapter->assembled_data;
}
/**
* gst_adapter_copy:
* @adapter: a #GstAdapter
* @dest: the memory where to copy to
* @offset: the bytes offset in the adapter to start from
* @size: the number of bytes to copy
*
* Copies @size bytes of data starting at @offset out of the buffers
* contained in @GstAdapter into an array @dest provided by the caller.
*
* The array @dest should be large enough to contain @size bytes.
* The user should check that the adapter has (@offset + @size) bytes
* available before calling this function.
*
* Since: 0.10.12
*/
void
gst_adapter_copy (GstAdapter * adapter, guint8 * dest, guint offset, guint size)
{
g_return_if_fail (GST_IS_ADAPTER (adapter));
g_return_if_fail (size > 0);
g_return_if_fail (offset + size <= adapter->size);
copy_into_unchecked (adapter, dest, offset + adapter->skip, size);
}
/**
* gst_adapter_flush:
* @adapter: a #GstAdapter
* @flush: the number of bytes to flush
*
* Flushes the first @flush bytes in the @adapter. The caller must ensure that
* at least this many bytes are available.
*
* See also: gst_adapter_peek().
*/
static void
gst_adapter_flush_unchecked (GstAdapter * adapter, guint flush)
{
GstBuffer *cur;
guint size;
GstAdapterPrivate *priv;
GSList *g;
GST_LOG_OBJECT (adapter, "flushing %u bytes", flush);
priv = adapter->priv;
/* clear state */
adapter->size -= flush;
adapter->assembled_len = 0;
/* take skip into account */
flush += adapter->skip;
/* distance is always at least the amount of skipped bytes */
priv->distance -= adapter->skip;
g = adapter->buflist;
cur = g->data;
size = GST_BUFFER_SIZE (cur);
while (flush >= size) {
/* can skip whole buffer */
GST_LOG_OBJECT (adapter, "flushing out head buffer");
priv->distance += size;
flush -= size;
gst_buffer_unref (cur);
g = g_slist_delete_link (g, g);
if (G_UNLIKELY (g == NULL)) {
GST_LOG_OBJECT (adapter, "adapter empty now");
adapter->buflist_end = NULL;
break;
}
/* there is a new head buffer, update the timestamp */
cur = g->data;
update_timestamp (adapter, cur);
size = GST_BUFFER_SIZE (cur);
}
adapter->buflist = g;
/* account for the remaining bytes */
adapter->skip = flush;
adapter->priv->distance += flush;
/* invalidate scan position */
priv->scan_offset = 0;
priv->scan_entry = NULL;
}
void
gst_adapter_flush (GstAdapter * adapter, guint flush)
{
g_return_if_fail (GST_IS_ADAPTER (adapter));
g_return_if_fail (flush <= adapter->size);
/* flushing out 0 bytes will do nothing */
if (G_UNLIKELY (flush == 0))
return;
gst_adapter_flush_unchecked (adapter, flush);
}
/**
* gst_adapter_take:
* @adapter: a #GstAdapter
* @nbytes: the number of bytes to take
*
* Returns a freshly allocated buffer containing the first @nbytes bytes of the
* @adapter. The returned bytes will be flushed from the adapter.
*
* Caller owns returned value. g_free after usage.
*
* Returns: oven-fresh hot data, or #NULL if @nbytes bytes are not available
*/
guint8 *
gst_adapter_take (GstAdapter * adapter, guint nbytes)
{
guint8 *data;
g_return_val_if_fail (GST_IS_ADAPTER (adapter), NULL);
g_return_val_if_fail (nbytes > 0, NULL);
/* we don't have enough data, return NULL. This is unlikely
* as one usually does an _available() first instead of peeking a
* random size. */
if (G_UNLIKELY (nbytes > adapter->size))
return NULL;
/* we have enough assembled data, take from there */
if (adapter->assembled_len >= nbytes) {
GST_LOG_OBJECT (adapter, "taking %u bytes already assembled", nbytes);
data = adapter->assembled_data;
/* allocate new data, assembled_len will be set to 0 in the flush below */
adapter->assembled_data = g_malloc (adapter->assembled_size);
} else {
/* we need to allocate and copy. We could potentially copy bytes from the
* assembled data before doing the copy_into */
GST_LOG_OBJECT (adapter, "taking %u bytes by collection", nbytes);
data = g_malloc (nbytes);
copy_into_unchecked (adapter, data, adapter->skip, nbytes);
}
gst_adapter_flush_unchecked (adapter, nbytes);
return data;
}
/**
* gst_adapter_take_buffer:
* @adapter: a #GstAdapter
* @nbytes: the number of bytes to take
*
* Returns a #GstBuffer containing the first @nbytes bytes of the
* @adapter. The returned bytes will be flushed from the adapter.
* This function is potentially more performant than gst_adapter_take()
* since it can reuse the memory in pushed buffers by subbuffering
* or merging.
*
* Caller owns returned value. gst_buffer_unref() after usage.
*
* Since: 0.10.6
*
* Returns: a #GstBuffer containing the first @nbytes of the adapter,
* or #NULL if @nbytes bytes are not available
*/
GstBuffer *
gst_adapter_take_buffer (GstAdapter * adapter, guint nbytes)
{
GstBuffer *buffer;
GstBuffer *cur;
guint hsize, skip;
g_return_val_if_fail (GST_IS_ADAPTER (adapter), NULL);
g_return_val_if_fail (nbytes > 0, NULL);
GST_LOG_OBJECT (adapter, "taking buffer of %u bytes", nbytes);
/* we don't have enough data, return NULL. This is unlikely
* as one usually does an _available() first instead of grabbing a
* random size. */
if (G_UNLIKELY (nbytes > adapter->size))
return NULL;
cur = adapter->buflist->data;
skip = adapter->skip;
hsize = GST_BUFFER_SIZE (cur);
/* our head buffer has enough data left, return it */
if (skip == 0 && hsize == nbytes) {
GST_LOG_OBJECT (adapter, "providing buffer of %d bytes as head buffer",
nbytes);
buffer = gst_buffer_ref (cur);
goto done;
} else if (hsize >= nbytes + skip) {
GST_LOG_OBJECT (adapter, "providing buffer of %d bytes via sub-buffer",
nbytes);
buffer = gst_buffer_create_sub (cur, skip, nbytes);
goto done;
}
if (gst_adapter_try_to_merge_up (adapter, nbytes)) {
/* Merged something, let's try again for sub-buffering */
cur = adapter->buflist->data;
if (GST_BUFFER_SIZE (cur) >= nbytes + skip) {
GST_LOG_OBJECT (adapter, "providing buffer of %d bytes via sub-buffer",
nbytes);
buffer = gst_buffer_create_sub (cur, skip, nbytes);
goto done;
}
}
/* we have enough assembled data, copy from there */
if (adapter->assembled_len >= nbytes) {
GST_LOG_OBJECT (adapter, "taking %u bytes already assembled", nbytes);
buffer = gst_buffer_new ();
GST_BUFFER_SIZE (buffer) = nbytes;
GST_BUFFER_DATA (buffer) = adapter->assembled_data;
GST_BUFFER_MALLOCDATA (buffer) = adapter->assembled_data;
/* flush will set the assembled_len to 0 */
adapter->assembled_data = g_malloc (adapter->assembled_size);
} else {
/* we need to allocate and copy. We could potentially copy bytes from the
* assembled data before doing the copy_into */
buffer = gst_buffer_new_and_alloc (nbytes);
GST_LOG_OBJECT (adapter, "taking %u bytes by collection", nbytes);
copy_into_unchecked (adapter, GST_BUFFER_DATA (buffer), skip, nbytes);
}
done:
gst_adapter_flush_unchecked (adapter, nbytes);
return buffer;
}
/**
* gst_adapter_available:
* @adapter: a #GstAdapter
*
* Gets the maximum amount of bytes available, that is it returns the maximum
* value that can be supplied to gst_adapter_peek() without that function
* returning NULL.
*
* Returns: number of bytes available in @adapter
*/
guint
gst_adapter_available (GstAdapter * adapter)
{
g_return_val_if_fail (GST_IS_ADAPTER (adapter), 0);
return adapter->size;
}
/**
* gst_adapter_available_fast:
* @adapter: a #GstAdapter
*
* Gets the maximum number of bytes that are immediately available without
* requiring any expensive operations (like copying the data into a
* temporary buffer).
*
* Returns: number of bytes that are available in @adapter without expensive
* operations
*/
guint
gst_adapter_available_fast (GstAdapter * adapter)
{
GstBuffer *first;
guint size;
g_return_val_if_fail (GST_IS_ADAPTER (adapter), 0);
/* no buffers, we have no data */
if (!adapter->buflist)
return 0;
/* some stuff we already assembled */
if (adapter->assembled_len)
return adapter->assembled_len;
/* take the first buffer and its size */
first = GST_BUFFER_CAST (adapter->buflist->data);
size = GST_BUFFER_SIZE (first);
/* we can quickly get the (remaining) data of the first buffer */
return size - adapter->skip;
}
/**
* gst_adapter_prev_timestamp:
* @adapter: a #GstAdapter
* @distance: pointer to location for distance or NULL
*
* Get the timestamp that was before the current byte in the adapter. When
* @distance is given, the amount of bytes between the timestamp and the current
* position is returned.
*
* The timestamp is reset to GST_CLOCK_TIME_NONE when the adapter is first
* created or when it is cleared.
*
* Returns: The previously seen timestamp.
*
* Since: 0.10.24
*/
GstClockTime
gst_adapter_prev_timestamp (GstAdapter * adapter, guint64 * distance)
{
g_return_val_if_fail (GST_IS_ADAPTER (adapter), GST_CLOCK_TIME_NONE);
if (distance)
*distance = adapter->priv->distance;
return adapter->priv->timestamp;
}
/**
* gst_adapter_masked_scan_uint32_peek:
* @adapter: a #GstAdapter
* @mask: mask to apply to data before matching against @pattern
* @pattern: pattern to match (after mask is applied)
* @offset: offset into the adapter data from which to start scanning, returns
* the last scanned position.
* @size: number of bytes to scan from offset
* @value: pointer to uint32 to return matching data
*
* Scan for pattern @pattern with applied mask @mask in the adapter data,
* starting from offset @offset. If a match is found, the value that matched
* is returned through @value, otherwise @value is left untouched.
*
* The bytes in @pattern and @mask are interpreted left-to-right, regardless
* of endianness. All four bytes of the pattern must be present in the
* adapter for it to match, even if the first or last bytes are masked out.
*
* It is an error to call this function without making sure that there is
* enough data (offset+size bytes) in the adapter.
*
* Returns: offset of the first match, or -1 if no match was found.
*
* Since: 0.10.30
*/
guint
gst_adapter_masked_scan_uint32_peek (GstAdapter * adapter, guint32 mask,
guint32 pattern, guint offset, guint size, guint32 * value)
{
GSList *g;
guint skip, bsize, i;
guint32 state;
guint8 *bdata;
GstBuffer *buf;
g_return_val_if_fail (size > 0, -1);
g_return_val_if_fail (offset + size <= adapter->size, -1);
/* we can't find the pattern with less than 4 bytes */
if (G_UNLIKELY (size < 4))
return -1;
skip = offset + adapter->skip;
/* first step, do skipping and position on the first buffer */
/* optimistically assume scanning continues sequentially */
if (adapter->priv->scan_entry && (adapter->priv->scan_offset <= skip)) {
g = adapter->priv->scan_entry;
skip -= adapter->priv->scan_offset;
} else {
g = adapter->buflist;
adapter->priv->scan_offset = 0;
adapter->priv->scan_entry = NULL;
}
buf = g->data;
bsize = GST_BUFFER_SIZE (buf);
while (G_UNLIKELY (skip >= bsize)) {
skip -= bsize;
g = g_slist_next (g);
adapter->priv->scan_offset += bsize;
adapter->priv->scan_entry = g;
buf = g->data;
bsize = GST_BUFFER_SIZE (buf);
}
/* get the data now */
bsize -= skip;
bdata = GST_BUFFER_DATA (buf) + skip;
skip = 0;
/* set the state to something that does not match */
state = ~pattern;
/* now find data */
do {
bsize = MIN (bsize, size);
for (i = 0; i < bsize; i++) {
state = ((state << 8) | bdata[i]);
if (G_UNLIKELY ((state & mask) == pattern)) {
/* we have a match but we need to have skipped at
* least 4 bytes to fill the state. */
if (G_LIKELY (skip + i >= 3)) {
if (G_LIKELY (value))
*value = state;
return offset + skip + i - 3;
}
}
}
size -= bsize;
if (size == 0)
break;
/* nothing found yet, go to next buffer */
skip += bsize;
g = g_slist_next (g);
adapter->priv->scan_offset += GST_BUFFER_SIZE (buf);
adapter->priv->scan_entry = g;
buf = g->data;
bsize = GST_BUFFER_SIZE (buf);
bdata = GST_BUFFER_DATA (buf);
} while (TRUE);
/* nothing found */
return -1;
}
/**
* gst_adapter_masked_scan_uint32:
* @adapter: a #GstAdapter
* @mask: mask to apply to data before matching against @pattern
* @pattern: pattern to match (after mask is applied)
* @offset: offset into the adapter data from which to start scanning, returns
* the last scanned position.
* @size: number of bytes to scan from offset
*
* Scan for pattern @pattern with applied mask @mask in the adapter data,
* starting from offset @offset.
*
* The bytes in @pattern and @mask are interpreted left-to-right, regardless
* of endianness. All four bytes of the pattern must be present in the
* adapter for it to match, even if the first or last bytes are masked out.
*
* It is an error to call this function without making sure that there is
* enough data (offset+size bytes) in the adapter.
*
* This function calls gst_adapter_masked_scan_uint32_peek() passing NULL
* for value.
*
* Returns: offset of the first match, or -1 if no match was found.
*
* Example:
* <programlisting>
* // Assume the adapter contains 0x00 0x01 0x02 ... 0xfe 0xff
*
* gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x00010203, 0, 256);
* // -> returns 0
* gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x00010203, 1, 255);
* // -> returns -1
* gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x01020304, 1, 255);
* // -> returns 1
* gst_adapter_masked_scan_uint32 (adapter, 0xffff, 0x0001, 0, 256);
* // -> returns -1
* gst_adapter_masked_scan_uint32 (adapter, 0xffff, 0x0203, 0, 256);
* // -> returns 0
* gst_adapter_masked_scan_uint32 (adapter, 0xffff0000, 0x02030000, 0, 256);
* // -> returns 2
* gst_adapter_masked_scan_uint32 (adapter, 0xffff0000, 0x02030000, 0, 4);
* // -> returns -1
* </programlisting>
*
* Since: 0.10.24
*/
guint
gst_adapter_masked_scan_uint32 (GstAdapter * adapter, guint32 mask,
guint32 pattern, guint offset, guint size)
{
return gst_adapter_masked_scan_uint32_peek (adapter, mask, pattern, offset,
size, NULL);
}