gstreamer/ChangeLog
Sebastian Dröge 394f21a98a Release 1.9.1
2016-07-06 13:48:45 +03:00

4699 lines
157 KiB
Text

=== release 1.9.1 ===
2016-07-06 Sebastian Dröge <slomo@coaxion.net>
* configure.ac:
releasing 1.9.1
2016-06-29 16:37:43 +0900 Kazunori Kobayashi <kkobayas@igel.co.jp>
* omx/gstomxvideodec.c:
omxvideodec: Use GST_VIDEO_FRAME_PLANE_STRIDE() to get output buffer's stride
GST_VIDEO_FRAME_PLANE_STRIDE() should be used to get the actual buffer stride,
as reported in the buffers's GstVideoMeta, when copying data to that buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=768173
2016-06-21 11:48:40 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* common:
Automatic update of common submodule
From ac2f647 to f363b32
2016-06-21 11:43:13 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxaudioenc.c:
omxaudioenc: implement GstPreset interface
To allow user to use GstPreset to quickly save and load a set of
parameters.
https://bugzilla.gnome.org/show_bug.cgi?id=767907
2016-06-21 11:41:15 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideoenc.c:
omxvideoenc: implement GstPreset interface
To allow user to use GstPreset to quickly save and load a set of
parameters.
https://bugzilla.gnome.org/show_bug.cgi?id=767907
2016-06-17 12:06:48 +0300 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* omx/gstomx.h:
* omx/gstomxaudiodec.c:
* omx/gstomxaudioenc.c:
* omx/gstomxvideo.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: #define OMX_SKIP64BIT on the RPi as required by their API
Also add generic support for OMX_SKIP64BIT to gst-omx, in case other
implementations also #define that for whatever reason.
https://bugzilla.gnome.org/show_bug.cgi?id=766475
2016-06-17 10:59:45 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Implement ::drain() virtual method
https://bugzilla.gnome.org/show_bug.cgi?id=767641
2016-06-04 19:31:45 +0100 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
configure: remove AG_GST_PARSE_SUBSYSTEM_DISABLES
This would check which subsystems are disabled in core by grepping
gstconfig.h. Only problem is: gstconfig.h has moved into libdir now
so we've been checking a non-existent file for a while now. The
macro would just sets GST_DISABLE_* for use in configure.ac and
Makefile.am, but we don't use that anywhere so just get rid of it
(the one place where we use GST_DISABLE_GST_DEBUG is in a .c file
which gets the define from the gstconfig.h include).
https://bugzilla.gnome.org/show_bug.cgi?id=750056
2016-01-20 03:10:38 +0900 Gwang Yoon Hwang <yoon@igalia.com>
* examples/egl/testegl.c:
* omx/gstomxvideodec.c:
omxvideodec : Use gstglmemoryegl for the RPi
Modified to use gstglmemoryegl to avoid texture creation/copy operations
at the glupload.
[Matthew Waters]: gst-indent the sources and port testegl to GstGLMemoryEGL
https://bugzilla.gnome.org/show_bug.cgi?id=760918
2016-04-14 10:04:32 +0100 Julien Isorce <j.isorce@samsung.com>
* common:
Automatic update of common submodule
From 6f2d209 to ac2f647
2016-02-26 12:42:41 +0200 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From b64f03f to 6f2d209
2016-02-17 20:51:03 +1100 Matthew Waters <matthew@centricular.com>
* examples/egl/testegl.c:
examples: update egl example for gstgl API changes
https://bugzilla.gnome.org/show_bug.cgi?id=762053
https://bugzilla.gnome.org/show_bug.cgi?id=753917
2016-02-05 18:11:06 -0300 Thiago Santos <thiagoss@osg.samsung.com>
* autogen.sh:
* common:
Automatic update of common submodule
From 86e4663 to b64f03f
2015-12-21 00:43:49 +0100 Koop Mast <kwm@rainbow-runner.nl>
* configure.ac:
configure: Make -Bsymbolic check work with clang.
Update the -Bsymbolic check with the version glib has. This version
works with clang.
https://bugzilla.gnome.org/show_bug.cgi?id=759713
2015-12-07 09:11:32 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>
* autogen.sh:
* common:
Automatic update of common submodule
From b319909 to 86e4663
2015-11-18 13:00:28 +0000 Enrique Ocaña González <eocanha@igalia.com>
* omx/gstomx.c:
Remember the last_error after a failed set state call to avoid blocking the next get state call
gst_omx_video_dec_flush() blocks forever in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomxvideodec.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n2110
when the previous call to gst_omx_component_set_state() fails in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n827.
To mitigate that, I set "last_error" to true, so the code in
http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n862
exits early and doesn't block.
https://bugzilla.gnome.org/show_bug.cgi?id=758274
2015-11-18 12:59:59 +0000 Enrique Ocaña González <eocanha@igalia.com>
* omx/gstomxaudiodec.c:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
Properly handle drain requests while flushing
Without this commit the decoder streaming thread stops without ever attending
the drain request, leaving the decoder input thread waiting forever.
https://bugzilla.gnome.org/show_bug.cgi?id=758274
2015-11-10 10:42:35 +0100 Nicolas Huet <nicolas.huet@parrot.com>
* omx/gstomx.c:
omx: fix hacks leak on class init
2015-10-21 14:37:13 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From b99800a to b319909
2015-10-21 14:28:41 +0300 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From 9aed1d7 to b99800a
2015-09-01 16:08:11 -0300 Thiago Santos <thiagoss@osg.samsung.com>
* omx/gstomxaacdec.c:
omxaacdec: Do not accept unknown layouts
It was defaulting to RAW when an unknown layout was received but
the caps template would actually forbid that on the caps query
or accept-caps anyway.
2015-09-01 08:59:54 -0300 Thiago Santos <thiagoss@osg.samsung.com>
* omx/gstomxaudiodec.c:
omxaudiodec: use default pad accept-caps handling
Instead of the audiodecoder one. The OMX audioo decoders have their
valid input in the template pad, so just check against that to
avoid doing a query downstream.
2015-08-28 12:57:33 -0300 Thiago Santos <thiagoss@osg.samsung.com>
* omx/gstomxvideodec.c:
omxvideodec: use default pad accept-caps handling
Instead of the videodecoder one. The OMX video decoders have their
valid input in the template pad, so just check against that to
avoid doing a query downstream.
2015-08-22 15:54:55 +0000 Graham Leggett <minfrin@sharp.fm>
* omx/gstomxvideoenc.c:
omxvideoenc: Add keyframe support for the Rpi, using OMX_IndexConfigBrcmVideoRequestIFrame
https://bugzilla.gnome.org/show_bug.cgi?id=753085
2015-08-20 17:20:50 +0900 Vineeth TM <vineeth.tm@samsung.com>
* examples/egl/testegl.c:
gst-omx: Fix memory leaks when context parse fails
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753865
2015-08-16 14:53:42 +0200 Philippe Normand <philn@igalia.com>
* omx/gstomxh264dec.c:
omxh264dec: implement is_format_change
The omxvideodecoder class only checks some of the caps parameters but if
other fields change such as h264 profile and/or level it wouldn't trigger a
reconfiguration.
https://bugzilla.gnome.org/show_bug.cgi?id=752376
2015-07-03 00:26:48 +0200 Aurélien Zanelli <aurelien.zanelli@darkosphere.fr>
* omx/gstomxvideodec.c:
omxvideodec: unref allocator after getting it from allocation query
Otherwise a reference will be leaked for each allocator. It only happens
when target platform is Raspberry Pi and when we have GL support.
https://bugzilla.gnome.org/show_bug.cgi?id=751867
2015-07-03 21:59:54 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From f74b2df to 9aed1d7
2015-06-16 17:50:14 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>
* common:
Automatic update of common submodule
From 6015d26 to f74b2df
2015-06-09 11:30:49 +0200 Edward Hervey <bilboed@bilboed.com>
* common:
Automatic update of common submodule
From d9a3353 to 6015d26
2015-06-08 23:08:28 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From d37af32 to d9a3353
2015-06-07 23:07:22 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 21ba2e5 to d37af32
2015-06-07 17:32:25 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From c408583 to 21ba2e5
2015-06-07 17:16:43 +0200 Stefan Sauer <ensonic@users.sf.net>
* autogen.sh:
* common:
Automatic update of common submodule
From c8fb372 to c408583
2015-05-19 18:21:40 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
* omx/gstomxaudiodec.h:
omxaudiodec: Add an output adapter for chunking the output into codec frames
Otherwise the base class will be confused.
See https://bugzilla.gnome.org/show_bug.cgi?id=685730
2015-04-26 18:24:13 +0100 Tim-Philipp Müller <tim@centricular.com>
* Android.mk:
* omx/Makefile.am:
Remove obsolete Android build cruft
This is not needed any longer.
2015-04-22 10:40:22 +0200 Sebastian Dröge <sebastian@centricular.com>
* INSTALL:
Remove INSTALL file
autotools automatically generate this, and when using different versions
for autogen.sh there will always be changes to a file tracked by git.
2015-04-08 15:57:59 +0100 Tim-Philipp Müller <tim@centricular.com>
* .gitignore:
* Makefile.am:
* configure.ac:
* m4/Makefile.am:
Add m4 directory so aclocal doesn't complain in autogen.sh
Might come in handy, and these warnings seem to be
fatal in some environments.
You may need to git clean -x -d -f your tree before
git pulling/merging.
2015-04-07 22:25:57 +0100 Tim-Philipp Müller <tim@centricular.com>
* INSTALL:
* autogen.sh:
Update autogen.sh to latest version
2015-04-03 18:58:17 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From bc76a8b to c8fb372
2015-03-06 12:12:49 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaacdec.c:
omxaudiodec: add comment explaining duplicate code path
2015-03-06 12:09:06 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaacdec.c:
Revert "omxaudiodec: remove duplicate code path"
This reverts commit a8d26ff27a8b43f589424a59294f9057641b2a46.
2015-03-06 12:03:56 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomx.c:
omx: handle both errors in the two steps of update_port_definition
Also consider potential errors in the _get_parameter() in the return of the
update_port_definition function.
CID #1287052
2015-03-06 10:57:53 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaudioenc.c:
omxaudioenc: impossible if statement
ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible
for it to be anything else at the if check. Remove the if check.
CID #1287053
2015-03-06 10:54:43 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaudiodec.c:
omxaudiodec: impossible if statement
ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible
for it to be anything else at the if check. Remove it.
CID #1287054
2015-03-06 10:50:30 +0000 Luis de Bethencourt <luis.bg@samsung.com>
* omx/gstomxaacdec.c:
omxaudiodec: remove duplicate code path
2014-12-19 11:19:55 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
omx: call handle_messages() only once in acquire_buffer() to avoid potential deadlock
There is one rare case where calling handle_messages() more than once can cause a deadlock
in the video decoder element:
- sink pad thread starts the src pad task (gst_omx_video_dec_loop())
- _video_dec_loop() calls gst_omx_port_acquire_buffer() on dec_out_port
- blocks in gst_omx_component_wait_message() releasing comp->lock and comp->messages_lock
(initially, there are no buffers configured on that port, so it waits for OMX_EventPortSettingsChanged)
- the sink pad thread pushes a buffer to the decoder with gst_omx_port_release_buffer()
- _release_buffer() grabs comp->lock and sends the buffer to OMX, which consumes it immediately
- EmptyBufferDone gets called at this point, which signals _wait_message() to unblock
- the message from EmptyBufferDone is processed in gst_omx_component_handle_messages()
called from gst_omx_port_release_buffer()
- gst_omx_port_release_buffer releases comp->lock
- the src pad thread now gets to run, grabbing comp->lock while it exits from _wait_message()
- _acquire_buffer() calls the _handle_messages() on the next line after _wait_message(),
which does nothing (no pending messages)
- then it goes to "retry:" and calls _handle_messages() again, which also does nothing
(still no pending messages)
- scheduler switches to a videocore thread that calls EventHandler, informing us about the
OMX_EventPortSettingsChanged event that just arrived
- EventHandler graps comp->messages_lock, but not comp->lock, so it can run in parallel at
this point just fine.
- scheduler switches back to the src pad thread (which is in the middle of _acquire_buffer())
- the next _handle_messages() which is right before if (g_queue_is_empty (&port->pending_buffers))
processes the OMX_EventPortSettingsChanged
- the buffer queue is still empty, so that thread blocks again in _wait_message()
- the sink pad thread tries to acquire the next input port buffer
- _acquire_buffer() also blocks this thread in:
if (comp->pending_reconfigure_outports) { ... _wait_message() ... }
- DEADLOCK. gstreamer is waiting for omx to do something, omx waits for gstreamer to do something.
By removing those extra _handle_messages() calls, we can ensure that all the checks of
_acquire_buffer() will re-run. In the above case, after the scheduler switches back to
the middle of _acquire_buffer(), the code will enter _wait_message(), which will see that
there are pending messages and will return immediately, going back to "retry:" and
re-doing all the checks properly.
https://bugzilla.gnome.org/show_bug.cgi?id=741854
2015-02-26 09:27:44 +0900 Wonchul Lee <chul0812@gmail.com>
* omx/gstomx.c:
omx: cleanup code a bit to remove else statement
https://bugzilla.gnome.org/show_bug.cgi?id=745191
2015-01-12 16:13:35 +0100 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From f2c6b95 to bc76a8b
2014-12-18 10:56:15 +0100 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From ef1ffdc to f2c6b95
2014-11-27 17:12:42 +0100 Edward Hervey <bilboed@bilboed.com>
* common:
Automatic update of common submodule
From 7bb2bce to ef1ffdc
2014-11-13 09:55:02 +0900 Jun Ji <jun.ji@lge.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxamrdec.c:
* omx/gstomxamrdec.h:
omx: Add omxamrdec
https://bugzilla.gnome.org/show_bug.cgi?id=739333
2014-10-27 18:00:50 +0100 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From 84d06cd to 7bb2bce
2014-10-21 13:03:44 +0100 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From a8c8939 to 84d06cd
2014-10-21 13:00:10 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 1f5d3c3 to a8c8939
2014-09-30 10:47:20 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Clean up code a bit to get rid of useless NULL checks
2014-09-30 10:50:07 +0900 junji <jun.ji@lge.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Unmap input buffers after usage
https://bugzilla.gnome.org/show_bug.cgi?id=736314
2014-08-31 20:30:13 +0000 Michal Lazo <michal.lazo@mdragon.org>
* omx/gstomxvideoenc.c:
omxvideoenc: Setup aspect ratio on RPi
Needs firmware from yesterday or newer to work with all possible
aspect ratios. Before that it only supported a fixed list.
https://bugzilla.gnome.org/show_bug.cgi?id=732533
2014-08-28 10:44:31 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE
2014-08-28 10:43:22 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Use the base class' open/close vfuncs instead of calling them ourselves
2014-08-26 22:13:53 -0500 Peng Liu <pengliu.mail@gmail.com>
* config/rpi/gstomx.conf:
* omx/gstomxvideoenc.c:
omxvideoenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE
Fix a video encoder stall problem on RPi when changing the aspect ratio.
https://bugzilla.gnome.org/show_bug.cgi?id=732533
2014-08-14 17:36:11 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
* omx/gstomxaudiodec.h:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omx: Let base classes handle EOS
https://bugzilla.gnome.org//show_bug.cgi?id=734774
2014-08-14 17:33:07 +0300 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Fix flushing logic and make it more similar to the video decoder
=== release 1.2.0 ===
2014-07-23 11:28:12 +0200 Sebastian Dröge <sebastian@centricular.com>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
* omx/Makefile.am:
Release 1.2.0
2014-07-22 09:23:00 +0200 Sebastian Dröge <sebastian@centricular.com>
* config/bellagio/gstomx.conf:
* config/rpi/gstomx.conf:
config: Update ranks to PRIMARY+1 to have higher preference than avdec_*
See https://bugzilla.gnome.org/show_bug.cgi?id=732161
2014-07-20 17:46:30 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiosink.c:
omxaudiosink: Set port to not flushing in prepare() and keep it at flushing in unprepare()
https://bugzilla.gnome.org/show_bug.cgi?id=733168
2014-07-13 22:15:18 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaacdec.c:
* omx/gstomxaudiodec.c:
* omx/gstomxaudiodec.h:
* omx/gstomxmp3dec.c:
omxaudiodec: Implement setting of fallback channel positions
2014-07-13 18:22:39 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxaacdec.c:
* omx/gstomxaacdec.h:
* omx/gstomxmp3dec.c:
omx: Add AAC audio decoder
2014-07-02 09:22:28 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Get PCM parameters from the out port, not the in port
2014-05-15 13:24:39 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiodec.c:
omxaudiodec: Implement hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
2014-05-10 23:12:54 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxaudiodec.c:
* omx/gstomxaudiodec.h:
* omx/gstomxmp3dec.c:
* omx/gstomxmp3dec.h:
omx: Add audio decoder base class and a subclass for MP3
2014-07-01 09:38:01 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* omx/Makefile.am:
omx: Link to gmodule-2.0-no-export for being able to use the g_module_*() API
https://bugzilla.gnome.org/show_bug.cgi?id=732518
2014-06-30 15:00:54 +0200 Sebastian Dröge <sebastian@centricular.com>
* examples/egl/testegl.c:
examples: #define GST_USE_UNSTABLE_API for libgstgl
2014-06-29 19:10:19 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: Properly accumulate headers and push before the next frame
Fixes output of encoding on RPi, where each header buffer (SPS and PPS)
is in a separate OMX buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=726669
2014-06-29 19:04:54 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Implement flush() instead of the deprecated reset()
2014-06-25 17:14:18 +0200 Sebastian Dröge <sebastian@centricular.com>
* config/rpi/gstomx.conf:
rpi: It's 44100Hz, not 41400Hz
2014-06-25 11:12:51 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* configure.ac:
configure.ac: require gstgl >= 1.3.3
2014-04-25 13:25:05 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* Makefile.am:
* configure.ac:
example: enable testegl
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-06-25 10:19:54 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/testegl.c:
testegl: do matrix mutlplication in the shader
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-06-25 09:36:38 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/testegl.c:
testegl: add a comment for the parse command
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-04-25 17:32:16 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/Makefile.am:
* examples/egl/cube_texture_and_coords.h:
* examples/egl/testegl.c:
testegl: convert code from GLESv1 to GLESv2
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-04-25 13:21:59 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/Makefile.am:
* examples/egl/testegl.c:
testegl: port to gstgl API
- append a glfilter just before fakesink
So that we get gltexture or eglimages
- propagate our EGLDisplay to the pipeline
see GST_QUERY_CONTEXT
- share our EGLContext with the iternal gl context
of the pipeline, see GST_QUERY_ALLOCATION
- use GstVideoGLTextureUploadMeta to upload
the incoming gltexture or eglimage to our gl texture
TODO: convert from GLESv1 to GLESv2
See https://bugzilla.gnome.org/show_bug.cgi?id=728940
2014-06-24 14:52:58 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxbufferpool.c:
* omx/gstomxbufferpool.h:
* omx/gstomxvideodec.c:
omxbufferpool: Copy buffers if the stride does not match and we can't use video meta
https://bugzilla.gnome.org/show_bug.cgi?id=731672
2014-06-24 14:52:43 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* omx/gstomx.h:
* omx/gstomxvp8dec.h:
omx: Only include OMX_VideoExt.h conditionally
It does not exist on the RPi for example.
2014-06-24 13:59:44 +0200 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
configure.ac: Require GStreamer core/base >= 1.2.2
Needed at least for gst_video_decoder_release_frame().
2014-06-24 13:02:13 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxbufferpool.c:
omxbufferpool: Fix format string compiler warning
2014-06-22 21:11:45 +0000 Michal Lazo <xlazom00@gmail.com>
* omx/gstomxbufferpool.c:
omxbufferpool: Initialize debug category
2014-06-24 12:42:22 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxbufferpool.c:
omxbufferpool: Properly convert OMX alignment to GStreamer alignment
GStreamer uses a bitmask for the alignment while OMX uses the
alignment itself. Let's convert.
https://bugzilla.gnome.org/show_bug.cgi?id=710564
2014-06-24 11:11:28 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxh264enc.c:
omxh264enc: Don't let baseclass finish frames for SPS/PPS buffers
Otherwise we a) send them twice, and b) finish a frame for something
that does not even include a frame.
https://bugzilla.gnome.org/show_bug.cgi?id=726669
2014-06-24 10:22:37 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideo.h:
omxvideo: Include the separate headers too for compatibility with 1.0.x
2014-03-24 16:09:40 +0800 Zhao, Halley <halley.zhao@intel.com>
* configure.ac:
* omx/gstomxvp8dec.h:
omxvp8dec: use VP8 definition from OMX_VideoExt.h
https://bugzilla.gnome.org/show_bug.cgi?id=726957
2014-03-24 15:33:26 +0800 Zhao, Halley <halley.zhao@intel.com>
* configure.ac:
configure: add --with-omx-header-path option for external omx headers
https://bugzilla.gnome.org/show_bug.cgi?id=726957
2014-06-18 23:04:33 +0200 Aurélien Zanelli <aurelien.zanelli@darkosphere.fr>
* omx/gstomxvideodec.c:
omxvideodec: fix a query leak
Also add a debug message if query fails.
https://bugzilla.gnome.org/show_bug.cgi?id=731898
2014-05-30 15:29:15 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideodec.c:
omxvideodec: release frames with old PTS to avoid memory issue
Interlaced stream could make the decoder use two input frames to produce
one output frame causing the gstvideodecoder frame list to grow.
Assuming the video decoder output frame in display order rather than in
decoding order, this commit add a way to release frames with PTS less
than current output frame.
https://bugzilla.gnome.org/show_bug.cgi?id=730995
2013-06-27 21:59:29 +0900 Kazunori Kobayashi <kkobayas@igel.co.jp>
* omx/gstomx.c:
omx: Fix a missing g_free() in error path
This fixes a memory leak with g_strdup() when an error occurs.
https://bugzilla.gnome.org/show_bug.cgi?id=731141
2014-06-02 15:34:09 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideodec.c:
omxvideodec: add missing stream unlock in error path
2014-05-31 15:12:05 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Don't handle disabling/enabling ports exactly like flushing
Otherwise we might abort a flush operation in another thread when
enabling/disabling ports, leading to deadlocks sometimes.
https://bugzilla.gnome.org/show_bug.cgi?id=730989
2014-05-26 11:02:10 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Don't leak buffer pool config in error cases
CID 1216158
2014-05-21 10:53:43 +0200 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From 211fa5f to 1f5d3c3
2014-05-19 09:10:07 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Don't forget to unref codec state
CID 1214603
2014-05-19 09:08:33 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Make output buffer pointer always initialized
CID 1214605
2014-05-19 09:06:42 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Check return value of gst_buffer_map()
CID 1214599
2014-05-19 09:04:09 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Check return value of gst_omx_port_set_enabled() for errors
CID 1214589
2014-05-19 09:01:46 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Check return values of buffer pool config parsing functions
CID 1214588
2014-05-19 08:48:50 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Remove dead code, buf can never be NULL here as we just check for that the line above
CID 1214596
2014-05-19 08:47:36 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Fix comparisons in gst_omx_state_to_string() case to actually make sense
CID 1214593
2014-05-19 08:45:10 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Make sure to compare the error codes as unsigned integers so that comparisons >2**31 actually work
CID 1214592
2014-05-19 08:40:23 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
omx: Fix comparisons in gst_omx_command_to_string() default cause to actually work
CID 1214591
2014-05-15 13:22:56 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Implement hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
2014-05-15 13:21:07 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Implement hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
2014-05-15 10:58:34 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Add a hack for not disabling the output port after set_format until the output format is known
Needed on some OMX implementations, e.g. the one from Atmel. It does
not send the settings-changed event on the output port if it is
disabled.
2014-05-12 12:33:32 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxaudiosink.c:
omxaudiosink: implement _delay only in the RaspberryPI
Make code implementation conditionally built for RaspberryPI because
OMX_IndexConfigAudioRenderingLatency seems to be a Broadcom extension.
On other targets the query position might not be accurate without
implementing _delay appropriatelly.
2014-05-12 08:56:15 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Correctly scale nTickCount by OMX_TICKS_PER_SECOND
2014-05-10 22:48:23 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Drain encoder on NULL buffer and don't drain on flushing
2014-05-10 22:47:56 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideodec.c:
omxvideodec: Set nTickCount based on the buffer's duration instead of something wrong
2014-05-10 22:47:21 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Set nTickCount to the whole duration of the buffer instead of a wrong calculation
2014-05-10 22:46:51 +0200 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudiosink.c:
omxaudiosink: Fix format string compiler warnings
2014-04-04 14:11:58 +0200 Josep Torra <n770galaxy@gmail.com>
* config/rpi/gstomx.conf:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxanalogaudiosink.c:
* omx/gstomxanalogaudiosink.h:
* omx/gstomxaudiosink.c:
* omx/gstomxaudiosink.h:
* omx/gstomxhdmiaudiosink.c:
* omx/gstomxhdmiaudiosink.h:
omxaudiosink: Implements OpenMAX based audio sinks
Provides omxanalogaudiosink and omxhdmiaudiosink elements on
the Raspberry PI.
- omxanalogaudiosink is capable to render raw mono or stereo audio
through the jack output.
- omxhdmiaudiosink is capable to render raw audio up to 8 channels
and transmit ac3/dts(IEC 61937) through the HDMI output.
- sinks provide a clock derived from rendered samples
- sinks support the GstStreamVolume interface by implementing
the volume and mute properties.
https://bugzilla.gnome.org/show_bug.cgi?id=728962
2014-05-03 10:17:35 +0200 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From bcb1518 to 211fa5f
2014-04-29 15:16:16 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: can negotiate caps with memory:EGLImage feature when using EGLImage allocator
Previously when using gst EGLImage allocator the caps was
video/x-raw, format=RGBA instead of
video/x-raw(memory:EGLImage), format=RGBA
Kepp previous behavior in case negotiation fails with caps feature.
It means it will still have a chance to use EGLImage even if the
feature is not in the caps.
https://bugzilla.gnome.org/show_bug.cgi?id=729196
2014-04-23 09:57:48 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvp8dec.h:
omxvp8dec: fix typo in GST_TYPE_OMX_VP8_DEC define
https://bugzilla.gnome.org/show_bug.cgi?id=728774
2014-04-16 11:00:55 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideodec.c:
omxvideodec: don't unref caps before logging field from it
https://bugzilla.gnome.org/show_bug.cgi?id=728322
2014-04-15 17:30:13 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* Makefile.am:
* configure.ac:
example: disable testegl since libgstegl has been removed
As decided in bug #703343
Not compatible with the new libgstgl API.
A portage has been started, attachment 272800.
https://bugzilla.gnome.org/show_bug.cgi?id=703343
2014-04-15 17:11:08 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: use new libgstgl API since libgstegl has been removed
There is no point to retrieve a ref/unref type
instead of an EGLDisplay directly. It's like for EGLImage.
https://bugzilla.gnome.org/show_bug.cgi?id=703343
2014-04-15 17:06:38 +0100 Julien Isorce <julien.isorce@collabora.co.uk>
* configure.ac:
* examples/Makefile.am:
* omx/Makefile.am:
* omx/gstomxvideodec.c:
configure.ac: check for libgstgl since libgstegl has been removed
https://bugzilla.gnome.org/show_bug.cgi?id=703343
2014-04-09 18:52:16 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxbufferpool.c:
* omx/gstomxvideodec.c:
omxvideodec: add support of more color format
Add support for ABGR, ARGB, RGB16, BGR16, YUY2, UYVY, YVYU, GRAY8 and
NV16 color format.
2014-04-09 18:51:57 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideodec.c:
omxvideodec: simplify color format conversion in fill_buffer function
2014-04-09 18:51:41 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxbufferpool.c:
omxbufferpool: make video stride and offset calculation easier
It will be easier to support more color format.
2014-04-09 18:51:12 +0200 Aurélien Zanelli <aurelien.zanelli@parrot.com>
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
omx: add an helper to convert OMX color format to GStreamer color format
2014-03-10 17:43:50 +0100 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
* omx/gstomxvideodec.c:
omxvideodec: Implement pipeline draining to support adaptive scenarios
When draining due a format change also drain
the pipeline to reclaim back all buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=726107
2014-03-27 13:57:32 +0100 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: fix several memory leaks in the testegl example
Ensure to call to image_data_free in order to release GPU resources.
Also ensure to destroy EGLImage and GLTexture from proper
thread/context.
https://bugzilla.gnome.org/show_bug.cgi?id=726107
2014-03-25 17:16:31 +0000 Julien Isorce <julien.isorce@collabora.co.uk>
* examples/egl/testegl.c:
examples: keep a ref on the buffer instead of the memory
Like in eglglessink
https://bugzilla.gnome.org/show_bug.cgi?id=726107
2014-03-07 20:08:05 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: fixes race condition during seeks
Acording 6.1.3 Seek Event Sequence in the OpenMAX IL 1.1.2 spec
document in order to flush the component it needs to be in
paused state.
https://bugzilla.gnome.org/show_bug.cgi?id=726038
2014-01-29 18:31:26 +0000 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: use flush because reset is deprecated
https://bugzilla.gnome.org/show_bug.cgi?id=726038
2014-01-27 17:03:50 +0000 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: populate the most downstream output port on reset
Make seeking work when using egl_render component
https://bugzilla.gnome.org/show_bug.cgi?id=726038
2014-03-24 17:49:59 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxbufferpool.c:
omxbufferpool: return buffers to the pool instead of freeing them
We have to return the buffers back to the pool in when stopping to
not mess with the GstBufferPool accounting.
The OMX buffers will be freed when those won't be in charge of the
pool in the chained up call to 'stop'.
Fixes segfaults on finalize and pool not being properly deactivated.
https://bugzilla.gnome.org/show_bug.cgi?id=726337
2014-03-19 12:12:49 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: add missing unlock in the error path
Signed-off-by: Christian König <christian.koenig@amd.com>
https://bugzilla.gnome.org/show_bug.cgi?id=726958
2014-03-18 23:36:59 +0100 Michal Lazo <xlazom00@gmail.com>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
fix filemode
2014-03-17 09:57:11 +0000 Julien Isorce <julien.isorce@collabora.co.uk>
* omx/gstomxbufferpool.c:
omxbufferpool: fix memory leak if used on output port
When using GstOMXBufferPool on an output port, it internally uses
a GPtrArray to manage the GstBuffers instead of the default queue
from the GstBufferPool base class.
In this case GstBufferPool::default_free_buffer is not called when
the pool is stopped. Because the queue is empty. So explicitely
call gst_omx_buffer_pool_free_buffer on each buffer contained in
the GPtrArray.
https://bugzilla.gnome.org/show_bug.cgi?id=726337
2014-03-16 17:32:05 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxh264enc.c:
omxh264enc: Fix compiler warnings
2014-03-16 17:19:08 +0100 Michal Lazo <xlazom00@gmail.com>
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: IDR interval, SPS and PPS headers for rpi
https://bugzilla.gnome.org/show_bug.cgi?id=720031
2014-03-13 14:26:58 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideo.c:
omxvideo: fix debug category initialisation
https://bugzilla.gnome.org/show_bug.cgi?id=726024
2014-03-13 19:04:47 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxbufferpool.h:
omxbufferpool: add proper type definitions
https://bugzilla.gnome.org/show_bug.cgi?id=726325
2014-03-02 10:30:04 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomx.c:
omx: consolidate message waiting code
Add a wait_message helper function and remove all those duplicated code.
https://bugzilla.gnome.org/show_bug.cgi?id=725493
2014-03-12 12:48:12 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideo.c:
omx: Copy old copyright notice into the new file
2014-03-12 12:47:34 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Rename function from _4_ to _for_ for clarity
2014-03-03 16:15:24 +0100 Christian König <christian.koenig@amd.com>
* omx/Makefile.am:
* omx/gstomxvideo.c:
* omx/gstomxvideo.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo: start sharing more code between video decoder and encoder
Identical functionality spread of two different components.
We can't use a common base class because of different inheritance,
but let's try to share the code anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=726024
2014-03-12 12:43:49 +0100 Sebastian Dröge <sebastian@centricular.com>
* examples/egl/Makefile.am:
examples: Only build RPi EGL example if RPi was chosen as target
2014-03-12 12:42:23 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxbufferpool.h:
omxbufferpool: Fix header include guard
2014-03-05 11:41:02 +0100 Christian König <christian.koenig@amd.com>
* omx/Makefile.am:
* omx/gstomxbufferpool.c:
* omx/gstomxbufferpool.h:
* omx/gstomxvideodec.c:
omxvideodec: separate the buffer pool from the decoder
https://bugzilla.gnome.org/show_bug.cgi?id=726025
2014-03-04 17:41:20 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: simplify tunnel functions
Specifying the component is error prone and unnecessary.
https://bugzilla.gnome.org/show_bug.cgi?id=726021
2014-03-07 17:12:24 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: fix memory leak in gst_omx_video_dec_allocate_output_buffers
https://bugzilla.gnome.org/show_bug.cgi?id=725907
2014-03-07 13:18:49 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: fix memory leak gst_omx_video_dec_negotiate
https://bugzilla.gnome.org/show_bug.cgi?id=725907
2014-03-05 18:54:05 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideoenc.c:
omxvideoenc: fix a memory leak in gst_omx_video_enc_getcaps
https://bugzilla.gnome.org/show_bug.cgi?id=725826
2014-03-05 17:43:33 +0100 Josep Torra <n770galaxy@gmail.com>
* Makefile.am:
Makefile.am: build examples
There's no reason to not build the examples now that are ported to 1.x.
2014-03-05 17:25:09 +0100 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: avoid a clashing name with the recently added GstEGLImagePool
Fixes build with current master.
2013-09-05 03:41:10 -0600 Christian König <christian.koenig@amd.com>
* omx/gstomxvideoenc.c:
omxvideoenc: simplify _find_nearest_frame
Just the same as we did with the decoder. Also give the
function a gst_omx_video_enc prefix to distinct it from
the decoder function.
https://bugzilla.gnome.org/show_bug.cgi?id=724236
2013-09-05 02:23:39 -0600 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: simplify _find_nearest_frame
No need to make it more complicated and error prone than
necessary. Also give the function a gst_omx_video_dec prefix
to distinct it from the encoder function.
https://bugzilla.gnome.org/show_bug.cgi?id=724236
2013-09-05 02:05:52 -0600 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: remove dead code
This code doesn't seems to be used for quite a while,
remove it before it starts to rot.
https://bugzilla.gnome.org/show_bug.cgi?id=724236
2014-03-01 22:28:24 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomx.c:
omx: fix two serious message handling bugs
Waiting for the next message if we already got one
is nonsense and can lead to lockups.
https://bugzilla.gnome.org/show_bug.cgi?id=725468
2014-03-01 18:49:41 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideoenc.c:
omxvideoenc: fix startup race condition
The reset function shouldn't start the src pad
loop if it wasn't started before.
Signed-off-by: Christian König <christian.koenig@amd.com>
2014-03-01 18:48:17 +0100 Christian König <christian.koenig@amd.com>
* omx/gstomxvideodec.c:
omxvideodec: fix startup race condition
The reset function shouldn't start the src pad
loop if it wasn't started before.
Signed-off-by: Christian König <christian.koenig@amd.com>
2014-02-28 09:36:13 +0100 Sebastian Dröge <sebastian@centricular.com>
* common:
Automatic update of common submodule
From fe1672e to bcb1518
2014-02-26 22:15:00 +0100 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 1a07da9 to fe1672e
2014-01-30 10:45:18 +0100 Edward Hervey <bilboed@bilboed.com>
* common:
Automatic update of common submodule
From d48bed3 to 1a07da9
2014-01-25 17:44:14 +0100 Sebastian Dröge <sebastian@centricular.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Don't handle FLUSHING and NOT_LINKED as errors
Also don't stop the task on NOT_LINKED. We're not a demuxer.
2013-12-22 22:35:31 +0000 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From dbedaa0 to d48bed3
2013-11-05 11:22:02 +0000 Tim-Philipp Müller <tim@centricular.com>
* common:
Automatic update of common submodule
From 865aa20 to dbedaa0
2013-09-28 13:32:37 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: simplify the thread synchronization code
Make everithing more simple and fix the races conditions remaining in
the previous approaches.
2013-09-25 19:17:17 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* config/rpi/gstomx.conf:
rpi: The WMV/VC1 decoder can only do WMV9 and VC1, no older versions
2013-09-24 18:34:42 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 6b03ba7 to 865aa20
2013-09-24 18:48:24 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: fix another race condition
Fix a race condition that caused randome deadlocks on EOS.
2013-09-20 17:19:53 +0200 Josep Torra <n770galaxy@gmail.com>
* config/rpi/gstomx.conf:
rpi: fix a copy paste error in the config file
2013-09-20 17:09:52 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: fix a race condition when seeking
Fixes a race condition that caused pipeline deadlock during seeks.
2013-09-20 10:38:12 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: display QoS statistics
2013-09-20 09:34:37 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: use dedicated thread for rendering the scene
Produces smother animation and prevents dropping frames due busy
mainloop.
2013-09-20 08:25:21 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/testegl.c:
examples: don't force an specific audio sink
Let playbin2 choose the audiosink available in the system.
2013-09-20 08:19:48 +0200 Josep Torra <n770galaxy@gmail.com>
* examples/egl/Makefile.am:
examples: drop remnants of initial appsink attempt
2013-09-20 16:18:18 +0200 Edward Hervey <edward@collabora.com>
* common:
Automatic update of common submodule
From b613661 to 6b03ba7
2013-09-19 18:45:36 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 74a6857 to b613661
2013-09-19 17:38:30 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 01a7a46 to 74a6857
2013-08-20 16:00:07 +0100 Tim-Philipp Müller <tim@centricular.net>
* omx/gstomx.c:
* omx/gstomxvideodec.c:
omx: don't use the 'z' modifier to print size_t
gcc will warn in some cases even if the size of the type
is exactly that of size_t on the platform.
https://bugzilla.gnome.org/show_bug.cgi?id=699008
2013-07-01 15:48:47 +0200 Roman Arutyunyan <arutyunyan.roman@gmail.com>
* omx/gstomxvideoenc.c:
gstomxvideoenc: Set bitrate in setcaps
Otherwise it gets lost whenever we configure new caps
https://bugzilla.gnome.org/show_bug.cgi?id=698049
2013-06-30 18:17:05 +0700 Ilya Smelykh <ilya@videoexpertsgroup.com>
* examples/egl/testegl.c:
examples: enable audio in testegl example
2013-06-12 09:38:22 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* configure.ac:
configure: Allow build without gstreamer-egl
2013-06-07 12:39:18 +0700 Ilya Smelykh <ilya@videoexpertsgroup.com>
* examples/egl/Makefile.am:
* examples/egl/testegl.c:
examples: testegl example port to 1.x
https://bugzilla.gnome.org/show_bug.cgi?id=701706
2013-06-05 15:17:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 098c0d7 to 01a7a46
2013-05-20 12:06:34 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Take lock on EOS to update the flow return value
Fixes "GThread-ERROR **: file gthread-posix.c: line 171
(g_mutex_free_posix_impl): error 'Device or resource busy' during
'pthread_mutex_destroy ((pthread_mutex_t *) mutex)'" in _finalize.
2013-05-15 10:54:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 5edcd85 to 098c0d7
2013-04-11 17:35:19 +0200 Josep Torra <n770galaxy@gmail.com>
* Makefile.am:
* configure.ac:
* examples/Makefile.am:
* examples/egl/Makefile.am:
* examples/egl/cube_texture_and_coords.h:
* examples/egl/testegl.c:
examples: add an example aplication based OpenGL ES + EGL
Application that shows how to integrate playbin with an OpenGL ES
scene through EGL. Renders a video on the surfaces of an animated cube.
The code is not ported to 1.x so it's not built by default.
2013-05-10 12:25:07 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: Redesign video size change reconfiguration code
Ensure stop the decoder before clossing the tunnel.
2013-05-06 16:25:27 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
Makefile.am: Add -I common/m4
This allows autoreconf to work correctly and automatic regeneration
of autotools files if something changed.
2013-05-06 19:03:59 +0530 jitendra <jvarshney20@gmail.com>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Add pads based on element type
This allows to later add sources and sink that only have a srcpad
or sinkpad.
https://bugzilla.gnome.org/show_bug.cgi?id=699754
2013-04-27 02:50:25 +0200 Carlos Rafael Giani <dv@pseudoterminal.org>
* omx/gstomx.c:
omx: fixed type error in printf call
%zu expects size_t
https://bugzilla.gnome.org/show_bug.cgi?id=699008
2013-04-08 17:26:16 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstomxvideodec.c:
Check for gstreamer-egl
And don't use if not available.
https://bugzilla.gnome.org/show_bug.cgi?id=697574
2013-04-23 09:53:18 +0100 Tim-Philipp Müller <tim@centricular.net>
* configure.ac:
configure: error out if no OMX target has been set explicitly with --with-omx-target=x
Avoids people building for e.g. the Raspberry Pi and then wondering
why things don't work as expected (since structs are packed differently
there).
2013-04-22 23:55:03 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 3cb3d3c to 5edcd85
2013-04-18 22:07:28 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxaudioenc.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: more printf format fixes
Fix printf formats again, so that gst-omx compiles warning-
free on the Raspberry Pi as well. Unfortunately OMX_UINT32
maybe be typedefed to uint32_t or unsigned long, which
doesn't work well with our debugging printf format strings,
so just use %u for those and cast to guint.
2013-04-18 16:40:06 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomx.c:
omx: fixes unused variable 'comp' when GStreamer is built without debug
2013-04-18 16:03:56 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: don't use 'self->dec_out_port' anymore and use just 'port'
Fixes some criticals.
2013-04-18 15:21:32 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: fixes 'port' may be used uninitialized in this function
2013-04-18 12:03:31 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: silence warnings building for RPI related to 'vcos_*'
2013-04-18 11:19:52 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: Use new type from libgstvideo
2013-04-16 14:50:49 +0530 jitendra <jvarshney20@gmail.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Disable output port before transition to idle state
https://bugzilla.gnome.org/show_bug.cgi?id=698109
2012-10-24 12:19:41 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
gst: Add better support for static plugins
2013-04-14 17:57:34 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From aed87ae to 3cb3d3c
2013-04-12 17:58:30 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
configure: add --disable-fatal-warnings for disabling -Werror
2013-04-09 21:02:09 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 04c7a1e to aed87ae
2013-04-08 17:02:32 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxaudioenc.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: fix printf formats in debug messages
OMX_U32 is typedefed to an unsigned long,
OMX_TICKS to a 64-bit integer.
2013-04-08 16:52:19 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: use the correct printf format in a debug message
2013-04-08 16:31:33 +0200 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: use the correct OMX_IndexParam value
Fixes playback is not smooth in the EGL path.
2013-04-05 13:45:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't use API that is not in master yet
It's not really needed here yet, will be needed in future versions
2013-02-25 11:55:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Add support for egl_render on RPi
2013-03-22 19:26:54 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
Back to development
2013-03-22 19:23:14 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
omx: fix compiler warnings when compiling with -DG_DISABLE_ASSERT
As we do for releases. Fixes 'variable may be used uninitialized'
warnings.
=== release 1.0.0 ===
2013-03-22 17:16:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* AUTHORS:
* ChangeLog:
* Makefile.am:
* NEWS:
* RELEASE:
* configure.ac:
* gst-omx.doap:
Release 1.0.0
2013-03-19 16:40:09 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomxtheoradec.h:
* omx/gstomxvp8dec.h:
omx: fix typo in copyright headers
2013-03-19 13:46:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Fix commit that added the VC1 decoder
2013-03-19 13:27:35 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomxh263dec.c:
* omx/gstomxh264dec.c:
* omx/gstomxmjpegdec.c:
* omx/gstomxmpeg2videodec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxtheoradec.c:
* omx/gstomxvideodec.c:
* omx/gstomxvp8dec.c:
* omx/gstomxwmvdec.c:
omx: Add more constraints to the default sink template caps
2013-03-19 13:10:39 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add VC1/WMV3 decoder
WMV2 and WMV1 (aka WMV 1-8) are not supported by RPi.
2013-03-19 12:59:20 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add MJPEG decoder
2013-03-19 12:56:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add VP8 decoder
2013-03-19 12:55:09 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Set ENDOFFRAME flag for the end of frames
2013-03-19 12:28:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add Theora decoder to the config
2013-03-19 09:36:18 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxtheoradec.c:
* omx/gstomxtheoradec.h:
omx: Add Theora decoder
2013-03-18 16:43:24 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Remove additional comma
2013-03-18 16:34:21 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxmpeg2dec.c:
* omx/gstomxmpeg2dec.h:
* omx/gstomxmpeg2videodec.c:
* omx/gstomxmpeg2videodec.h:
omx: Rename MPEG2 decoder for consistency everywhere
2013-03-18 16:30:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxmjpegdec.c:
* omx/gstomxmjpegdec.h:
omx: Add MJPEG decoder support
2013-03-18 16:06:54 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxvp8dec.c:
* omx/gstomxvp8dec.h:
omx: Add VP8 decoder support
2013-03-18 15:44:23 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
rpi: Add h263 decoder and rename MPEG2 decoder for consistency
2013-03-16 13:20:27 +0000 Tim-Philipp Müller <tim@centricular.net>
* omx/gstomxmpeg2dec.c:
omxmpeg2dec: mpeg-2 decoder should be able to handle mpeg-1 too
https://bugzilla.gnome.org/show_bug.cgi?id=695879
2013-03-16 10:13:06 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomx.c:
omx: minor stylistic change for consistency with other similar code
2013-03-16 10:00:24 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Clarify that loop task is also paused in EOS
2013-03-16 09:59:01 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideoenc.c:
omxvideoenec: Don't forget propagate flow return value upstream
2013-03-15 13:16:39 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
omx: improve debug logging some more
2013-03-15 14:09:45 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure that the first frame we pass to OpenMAX is a sync frame
2013-03-15 11:46:34 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Stop output port task after draining
2013-03-15 10:58:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset EOS flag in more places
2013-03-15 10:38:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Deallocate output buffers with the right function
2013-03-15 01:06:05 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: log commands as strings
Makes logs easier to read.
2013-03-15 00:47:47 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: log states as strings
2013-03-15 00:28:02 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: log component name in debug messages
Useful when we have more different components
active at the same time.
2013-03-15 09:51:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't interpolate timestamps
We will get exactly one frame per input buffer and assigning
timestamps between frames if more than one OMX buffer is required
per frame easily confuses timestamp tracking in OMX.
2013-03-15 09:32:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Give the codec_data the timestamp of the first frame and no duration
2013-03-14 17:31:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
omx: The MPEG4 encoder is not available on RPi and probably never will
2013-03-14 17:26:30 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset some more buffer fields as required
2013-03-14 17:01:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
omx: The hack to disable usage of EOS buffers is not necessary anymore on RPi
2013-03-14 17:00:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset the flags for output ports when releasing a buffer, not for input ports
2013-03-14 15:03:02 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
omx: Only unref caps after usage of its fields
2013-03-14 14:51:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Simplify bufferpool implementation
2013-03-13 13:23:35 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve min/max buffer counts handling
2013-03-14 12:49:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Handle the OMX_EventBufferFlag to detect EOS too
2013-03-13 10:29:23 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Mark OpenMAX buffers as EGLImage if they contain one
Needs special handling in some places, e.g. because nFilledLen
will always be 0.
2013-03-13 10:21:49 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Properly check the nVersion field
2013-03-13 09:34:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: RPi returns garbage for OMX_IndexParamVideoBitrate, work around that
2013-03-12 20:02:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure to always get the right buffer
2013-03-12 19:35:39 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure the buffer is released to the pool if it's not the one we wanted
2013-03-12 19:17:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Drop too late frames instead of finishing them
2013-03-12 19:16:46 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omx: Release buffers to the correct port
2013-03-13 09:37:02 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always load the OpenMAX IL cores with G_MODULE_BIND_LOCAL
2013-03-12 18:20:22 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Lazy-load symbols of libbcm_host.so
It exports eglIntOpenMAXILDoneMarker(), which is also
exported by libopenmaxil.so... but we need the version
from libopenmaxil.so as the other one is just a stub.
2013-03-11 13:59:15 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaacenc.c:
* omx/gstomxh263enc.c:
* omx/gstomxmpeg4videoenc.c:
omx: Don't set profile/level in other encoders if downstream caps don't specify any
2013-03-11 13:49:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: If caps specify no profile/level use the component's defaults
2013-03-11 13:45:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Always allocate output buffers from the loop function
2013-03-11 13:12:57 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: The h264 encoders are supposed to output byte-stream/au
2013-03-11 11:47:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Wait until the Executing state is reached before passing buffers to the component
2013-03-11 10:39:25 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't provide buffers to downstream
This only works reliable if we have a way to tell downstream to
release all our buffers for reconfiguration.
2013-03-11 10:29:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Disable output port when setting a new format
2013-03-11 10:29:30 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Disable output port when setting a new format
2013-03-11 10:22:07 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Disable output port when setting a new format
Based on a patch by Josep Torra <n770galaxy@gmail.com>
2013-03-11 10:04:10 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Catch errors when releasing buffers to a port and handle them
2013-03-10 12:09:23 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Use the correct video codec state when filling an input buffer
2013-03-10 12:05:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Store correct input state
2013-03-10 11:27:34 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Allocate output buffers as early as possible
2013-03-10 11:01:57 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Log unknown events
2013-03-09 14:14:40 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix deadlock in encoders and add explainatory comments.
2013-03-09 13:27:08 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: fix printf format identifier
2013-03-09 13:07:59 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omx: Minor changes on debuging info
2013-03-09 13:00:33 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: avoid a deadlock
2013-03-08 15:56:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't forget to populate output port
2013-03-08 15:11:27 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Flush and stop srcpad when configuring new caps
2013-03-07 17:40:21 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
Revert "omx: use no-component-reconfigure hack on the Raspberry PI"
This reverts commit e123b2089f69a413241f30a2428ea6edd8f231e7.
It's not required anymore after the fix from the last commit.
2013-03-07 17:38:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Only negotiate a color format with downstream on the initial caps
2013-03-07 17:29:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure the output port is disabled while we allocate buffers
2013-03-07 17:27:05 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Also wait for disabled output ports to be reconfigured
2013-03-07 14:10:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Add buffer pool for sharing OpenMAX memory with downstream
2013-03-07 11:11:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Add timeout to the flush operation and move buffer populating to a separate function
2013-03-06 17:33:23 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
* omx/gstomx.h:
omx: Remove min buffer count hack for RPi again
It's not necessary anymore
2013-03-06 17:05:51 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Do number of buffers configuration explicitely
2013-03-07 11:24:54 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: fixes reconfiguration
Avoid having fixed fields from previous caps on reconfiguration.
2013-03-07 11:02:39 +0100 Josep Torra <n770galaxy@gmail.com>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
omx: use no-component-reconfigure hack on the Raspberry PI
2013-03-07 00:03:28 +0000 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 2de221c to 04c7a1e
2013-03-01 15:32:47 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideoenc.h:
omxvideoenc: drop unused data member
2013-03-01 12:23:54 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
omxvideoenc: And set it actually on the right port
2013-03-01 12:18:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
omxvideoenc: Set the coding type in the subclasses to the specific codec
2013-03-01 11:49:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: gst_omx_port_update_port_definition() returns a OMX_ERRORTYPE, not a gboolean
2013-03-01 11:44:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo{dec,enc}: Don't use the input state if it wasn't set yet
2013-03-01 11:25:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Only enable the output port after we know the output format
2013-03-01 11:24:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Only enable the output port after we know the output format
2013-02-28 17:02:31 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Only enable the output port after we know the output format
2013-03-01 11:18:18 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Handle errors more gracefully
2013-02-28 15:48:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxh263dec.c:
* omx/gstomxh264dec.c:
* omx/gstomxmpeg2dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
* omx/gstomxwmvdec.c:
omx: Return the OMX_ERRORTYPE from gst_omx_port_update_port_definition
2013-02-28 15:37:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Return port definition update errors
2013-02-28 13:57:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/rpi/gstomx.conf:
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add hack for RPi for the minimum number of buffers required for a port
The value in the port definition is invalid and the initial actual
buffer count should be used.
2013-02-28 13:26:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always tell the component about the right number of buffers that we're going to allocate
2013-02-28 13:07:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Invert assertion to let it express what was intended
2013-02-28 11:19:07 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Add API for allocating a specific number of buffers and using EGLImages or buffers allocated elsewhere
2013-02-27 16:55:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Refactor code flow a bit if output port settings have changed
2013-02-27 15:49:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Clean up port settings change handling
2013-02-27 11:30:14 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: initialize param structure before using it
2013-02-27 10:21:39 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideoenc.c:
omxvideoenc: prevent a NULL pointer access
2013-02-26 17:25:49 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideodec.c:
omxvideodec: prevent a NULL pointer access
2013-02-25 13:11:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Fix deadlock during reconfiguration
2013-02-25 12:38:27 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Auto-detect the port indizes if possible
2013-02-25 11:42:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Refactor querying of component supported caps into its own function
2013-02-25 10:41:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Refactor waiting for buffers to be released by the component to a separate function
2013-01-11 17:44:13 +0000 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add methods to set up and close a tunnel between components
2013-02-25 09:15:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaacenc.c:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Rename component variable
2013-02-25 09:15:46 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Rename component variable
2013-02-25 09:12:22 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Rename component variable
2013-02-22 16:27:33 +0100 Josep Torra <n770galaxy@gmail.com>
* omx/gstomxvideoenc.c:
omxvideoenc: remove duplicated line
2013-02-22 10:42:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
Retry loading libbcm_host.so without an absolute path if that failed
2013-02-21 20:32:42 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/bellagio/Makefile.am:
Add missing file from last commit
2013-02-21 11:01:28 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/Makefile.am:
* config/bellagio/gstomx.conf:
* configure.ac:
* omx/Makefile.am:
* omx/gstomx.conf:
Add OpenMAX IL target for Bellagio
Not tested since a very long time though.
2013-02-21 10:59:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
Allow using external OpenMAX IL headers
2013-02-21 10:14:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* .gitignore:
Update .gitignore
2013-02-21 10:13:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/Makefile.am:
* config/raspberry-pi.conf:
* config/rpi/Makefile.am:
* config/rpi/gstomx.conf:
* configure.ac:
Install the RPI config when the RPI target is selected
2013-02-21 10:08:07 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
Set default hacks for the RPI target and always initialize bcm_host
2013-02-21 10:05:37 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
Add configure parameter for setting the OpenMAX IL target
2013-02-12 11:55:39 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add FIXME for the future
2013-02-12 11:49:21 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omx: Some minor refactoring and cleanup
2013-02-12 11:45:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Don't access the port's buffers array if it wasn't allocated yet
2013-02-12 11:44:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Mark an array as const
2013-02-12 11:41:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Split enabling/disabling of port into sending the command and waiting for it
This allows to do anything necessary after sending the command to actually let it finish
2013-02-12 11:37:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Flushing is also allowed in Paused state
2013-02-12 11:28:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Set stride, slice height and buffer size
2013-02-12 11:09:30 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* config/raspberry-pi.conf:
config: Add h264 and mpeg2 encoders to the raspberry pi config
Not completely working yet though.
2013-02-12 11:03:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Properly negotiate OMX color format with the component
2013-02-12 10:53:24 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Implement getcaps() vfunc
2013-01-29 21:32:53 +0000 Tim-Philipp Müller <tim@centricular.net>
* configure.ac:
configure: use 1.0 gstconfig.h to detect disabled subsystems
Update unused configure check for GStreamer core subsystem
features from 0.10 to 1.0.
2013-01-28 20:44:41 +0100 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From a942293 to 2de221c
2013-01-24 14:02:36 +0100 Julian Scheel <julian@jusst.de>
* config/raspberry-pi.conf:
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxmpeg2dec.c:
* omx/gstomxmpeg2dec.h:
omx: add mpeg2 video decoder
This adds a decoder class for mpeg2, as well as an extended
configuration for raspberry pi.
https://bugzilla.gnome.org/show_bug.cgi?id=692446
Signed-off-by: Julian Scheel <julian@jusst.de>
2013-01-18 16:47:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Minimize the time when the messages lock is held
Fixes a deadlock if any OMX functions are called when the
messages are handled.
Thanks to Nicolas Dufresne for noticing.
2013-01-18 15:28:20 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomx.c:
omx: improve debug message when we can't find the config file
Mention where we looked for the config file.
2013-01-18 12:34:38 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
build: fix autogen.sh with automake 1.13
AM_CONFIG_HEADER -> AC_CONFIG_HEADERS
2013-01-17 18:07:41 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
* omx/gstomxaudioenc.h:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.h:
omx: Fix includes to properly work with the 1.0 releases
2013-01-15 15:08:28 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* common:
Automatic update of common submodule
From a72faea to a942293
2013-01-15 14:34:45 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Update port definition when changing some port setting
2013-01-14 11:41:57 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
omx: Rename from libgstopenmax.so to ligstomx.so for consistency
2013-01-11 15:32:22 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* omx/gstomx.c:
omx: Add a method to send message
2013-01-11 15:44:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Atomic ops are not required anymore for the reconfiguration
2013-01-11 12:52:10 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix some memory leaks and suboptimal locking
2013-01-11 12:34:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Don't forget to unmap frame in error cases
2013-01-11 12:29:20 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix copying of the video frames to the OMX buffers
2013-01-11 12:24:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix copying of the video frames from the OMX buffers
2013-01-10 14:44:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omx: Implement new approach for locking that should solve all deadlocks on RPi
No mutex is locked while calling any OpenMAX functions anymore
and everything from the OpenMAX callbacks is inserted into a message
queue and handled from outside the callbacks.
Also there's only a single mutex and condition variable per component
now for handling anything from OpenMAX callbacks and a single mutex
for keeping our component/port state sane.
2012-12-20 19:30:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Set the OMX buffer nFilledLength field properly
2012-12-20 18:48:21 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omxrecmutex: Fix another race condition when two threads are trying to lock for recursion at the same time
2012-12-20 18:16:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omxrecmutex: Fix yet another race condition that resulted in deadlocks
2012-12-20 17:46:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omx: Fix another race condition in the recursive mutex
Between lock() and begin_recursion() it was possible for another thread to
try to do a recursive_lock(). This would block because the mutex was already
locked(), but not ready for recursive locking yet. unlock() would never
happen in the original thread because it was waiting for the other thread
to finish first.
Happened on the Raspberry Pi.
2012-12-20 14:45:18 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
omxrecmutex: Fix a small race condition when unlocking a non-recursive lock
2012-12-20 12:30:05 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix ununsed variable compiler warning
2012-12-20 12:27:47 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: No need to start the srcpad task in ::start() already
It will be started properly after the caps are set.
2012-12-20 12:23:49 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: OMX_ErrorNoMore is no error and just means we ended iteration
2012-12-20 12:20:31 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Improve debug output
2012-12-20 12:02:30 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't forget to free a GList
2012-12-20 11:56:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Map OMX_COLOR_FormatYUV420PackedPlanar to I420 too
This is used on the Raspberry Pi.
2012-12-20 11:55:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: During negotiation of the output format make sure we use the correct OpenMAX format
2012-12-20 11:42:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: If negotiation fails this could also mean that the component can't do it at this point yet
2012-12-20 11:40:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve format negotiation a bit
Don't leak caps and make sure to fixate caps.
2012-12-19 13:05:28 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
omx: Also initialize nStep field of the OMX structures
2012-12-19 13:03:37 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
omx: Initialize struct version with the OMX version we compiled with
2012-12-19 12:44:31 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Extract data from the input buffer, not the codec data
2012-12-19 12:19:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* tools/listcomponents.c:
omx: Use has_suffix() instead of has_prefix() for the Broadcom hack
2012-12-19 12:08:35 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
* configure.ac:
* tools/Makefile.am:
* tools/listcomponents.c:
tools: Add tool to list all components and their roles
2012-12-19 11:31:51 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add hack to load and initialize libbcm_host.so
Needed on the Raspberry Pi. Patch based on a patch by
George Kiagiadakis <george.kiagiadakis@collabora.com>
2012-12-19 11:22:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/gstomx.h:
configure: Add configure option to pack OpenMAX structures
This is required to set to 4 for the Raspberry Pi for example.
2012-12-19 11:07:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
configure: Require GStreamer 1.0.0
2012-04-20 17:13:52 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.h:
omx: Initialize structures to version 1.1.2
2012-12-19 09:51:22 +0000 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
* config/Makefile.am:
* config/raspberry-pi.conf:
* configure.ac:
* omx/gstomx-raspberry.conf:
config: Add raspberry-pi configuration in a different directory
2012-05-20 20:11:59 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx-raspberry.conf:
raspberry: Add a gstomx.conf for the Raspberry Pi
2012-12-12 17:45:39 +0000 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
* omx/gstomxvideoenc.h:
omx: Fix some compilation errors caused by circular includes
2012-11-19 11:29:44 +0000 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 6bb6951 to a72faea
2012-11-12 15:14:09 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix refcount problem with frames being dropped because of decoder bugs
2012-11-12 11:29:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omx: Update to new GLib thread API
2012-10-22 14:34:53 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Use open/close vfuncs
2012-10-22 14:28:04 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Handle video meta correctly
2012-06-20 13:11:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
* omx/gstbasevideoutils.c:
* omx/gstbasevideoutils.h:
* omx/gstomxh263dec.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
* omx/gstomxwmvdec.c:
omx: Port to video base classes from -base
2012-10-17 17:57:43 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstomxaacenc.c:
* omx/gstomxh263dec.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxwmvdec.c:
omx: gst_element_class_set_details_simple() -> set_static_metadata()
2012-10-06 15:01:11 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 6c0b52c to 6bb6951
2012-09-22 16:10:38 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 4f962f7 to 6c0b52c
2012-06-21 20:22:13 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
omx: fix debug statement
2012-06-21 20:21:03 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
omx: use recursive_lock inside set_last_error(), since this function may be called from an event handler
2012-08-22 13:31:59 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 668acee to 4f962f7
2012-08-05 16:42:43 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 94ccf4c to 668acee
2012-08-03 19:32:13 +0100 Tim-Philipp Müller <tim@centricular.net>
* omx/gstomx.c:
omx: fix plugin name for new GST_PLUGIN_DEFINE API
2012-07-23 08:47:32 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 98e386f to 94ccf4c
2012-07-10 09:57:09 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
omx: Update for allocation query API changes
2012-06-20 11:09:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Fix compilation after gst_pad_start_task() API changes
2012-06-08 15:06:35 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From 03a0e57 to 98e386f
2012-06-06 18:20:18 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From 1fab359 to 03a0e57
2012-06-01 10:30:27 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From f1b5a96 to 1fab359
2012-05-31 13:10:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 92b7266 to f1b5a96
2012-05-30 12:47:59 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From ec1c4a8 to 92b7266
2012-05-30 11:26:30 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 3429ba6 to ec1c4a8
2012-05-13 15:58:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From dc70203 to 3429ba6
2012-05-08 16:13:32 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
omx: Fix spelling mistake found by lintian: s/Seperate/Separate/
2012-04-30 23:58:43 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxrecmutex.c:
* omx/gstomxrecmutex.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
Implement a new custom recursive mutex type and fix locking in callbacks so that in-context calls are allowed.
According to the OMX specification, implementations are allowed to call
callbacks in the context of their function calls. However, our callbacks
take locks and this causes deadlocks if the unerlying OMX implementation
uses this kind of in-context calls.
A solution to the problem would be a recursive mutex. However, a normal
recursive mutex does not fix the problem because it is not guaranteed
that the callbacks are called from the same thread. What we see in Broadcom's
implementation for example is:
- OMX_Foo is called
- OMX_Foo waits on a condition
- A callback is executed in a different thread
- When the callback returns, its calling function
signals the condition that OMX_Foo waits on
- OMX_Foo wakes up and returns
The solution I came up with here is to take a second lock inside the callback,
but only if recursion is expected to happen. Therefore, all calls to OMX
functions are guarded by calls to gst_omx_rec_mutex_begin_recursion() / _end_recursion(),
which effectively tells the mutex that at this point we want to allow calls
to _recursive_lock() to succeed, although we are still holding the master lock.
2012-04-20 14:51:34 +0000 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add hack to disable setting roles to components.
Conflicts:
omx/gstomx.c
2012-04-30 23:20:24 +0000 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omxvideodec: Implement no-empty-eos-buffer hack, as in omxvideoenc.
Conflicts:
omx/gstomxvideodec.c
2012-04-30 23:19:55 +0000 George Kiagiadakis <george.kiagiadakis@collabora.com>
* omx/gstomxvideodec.c:
omxvideodec: Fix coding style in the drain-may-not-return hack code
2012-04-25 19:03:48 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* omx/gstomx.c:
omx: Fix trivial debug print bug
2012-04-25 19:01:32 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omxvideodec: Add hack for Ducati components not returning from drain
This happens on the Galaxy Nexus, and causes the pipeline to hang waiting
endlessly for a drain. The hack replaces the wait with a wait + 500ms timeout.
2012-04-25 16:35:40 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* omx/gstomx.c:
omx: Fix deadlock between ending a flush and the event handler
gst_omx_port_set_flushing() calls OMX_FillThisBuffer at the end of a flush
without releasing the port lock, and this can cause a deadlock with the
EventHandler. This patches fixes this by dropping the lock for the duration of
the fill buffer call.
2012-04-24 15:41:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
omx: Update video encoder/decoder base classes from gst-plugins-bad
2012-04-16 09:16:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
configure: Modernize autotools setup a bit
Also we now only create tar.bz2 and tar.xz tarballs.
2012-04-16 09:12:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
2012-04-16 08:34:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Use gst_buffer_extract() to copy the input buffer data to the OpenMAX buffer
2012-04-13 17:16:42 -0400 Alessandro Decina <alessandro.decina@collabora.com>
* omx/Makefile.am:
Fix relative/absolute path glitch
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@collabora.com>
2012-04-12 15:57:32 -0400 Olivier Crête <olivier.crete@collabora.com>
* common:
* configure.ac:
* omx/Makefile.am:
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaacenc.c:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxh263dec.c:
* omx/gstomxh263enc.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
* omx/gstomxwmvdec.c:
Port to Gst 0.11
2012-01-18 16:53:16 -0300 Reynaldo H. Verdejo Pinochet <reynaldo@collabora.com>
* Android.mk:
* omx/Makefile.am:
Enable building with Android's buildsystem
This change adds prelimary buildsystem hooks to
build gst-omx with the Android buildsystem. Like
the rest of GStreamer's Android hooks, the process
relies on the availability of androgenizer. A tool
developed by Collabora to automatically generate
Android.mk files from within the auto* setup.
Androgenizer is currently available at:
http://cgit.collabora.com/git/user/derek/androgenizer.git/
2011-12-13 10:17:41 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
basevideocodec: Don't use G_TYPE_REGISTER_BOXED() yet
This would require GLib 2.26.
2011-12-14 10:09:34 +0100 Jonas Larsson <Jonas.Larsson@palm.com>
* omx/gstomxaudioenc.c:
omxaudioenc: Add hack for encoder components that don't allow empty EOS buffers
2011-12-14 10:07:29 +0100 Jonas Larsson <Jonas.Larsson@palm.com>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix deadlock when using the EOS hack
2011-12-12 14:26:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Remove workaround for basevideocodec bug
2011-12-12 14:26:34 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Remove workaround for basevideocodec bug
2011-12-05 17:57:01 +0000 Matej Knopp <matej.knopp@gmail.com>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
basevideo: Make GstVideoFrame a reference counted boxed object
...and also clear all existing frames when resetting the decoder or encoder.
2011-12-09 12:17:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideoenc.c:
omx: Add hack for encoder components that don't allow empty EOS buffers
2011-12-09 10:21:47 +0100 Dake Gu <Dake.Gu@palm.com>
* omx/gstomxaacenc.c:
omxaacenc: Generate and set codec_data on the caps for raw AAC
2011-10-31 11:36:06 +0100 Alessandro Decina <alessandro.decina@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: handle failures in start() and stop()
2011-08-26 10:50:38 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoenc: do not try to calculate latency from an unknown framerate
It'll divide by zero, and latency is unknown for an unknown framerate.
Fixes an assert in the schroenc test.
https://bugzilla.gnome.org/show_bug.cgi?id=657419
2011-12-08 11:50:49 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Only make the header buffer metadata writable, not the buffer
2011-12-08 10:18:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Fix handling of force-keyunit events
2011-12-06 13:28:41 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Don't forward EOS events immediately but let all other events be handled by the base class
Previously this logic was inversed, which did not make any sense at all.
2011-12-06 12:47:25 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-06 12:47:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-06 12:46:51 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Use correct timestamp, duration and filled length for the EOS buffers
2011-12-05 13:18:09 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Improve debugging of buffer handling
2011-12-05 08:12:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Drop EOS events in ::finish()
The event will be forwarded downstream from the srcpad
loop function after the last buffer was generated by the
component. Forwarding it after ::finish() will use the
sinkpad streaming thread and does not guarantee that
the encoder is completely drained.
2011-12-01 16:20:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Properly drop frames due to QoS
Instead of finishing them they should be passed to drop(), which
will then send QoS messages.
2011-11-29 12:21:32 +0100 Jonas Larsson <jonas@hallerud.se>
* omx/gstomxh264enc.c:
omxh264enc: Add support for resending headers after a forced-keyframe
2011-11-29 12:12:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.h:
* omx/gstbasevideoencoder.c:
basevideoencoder: Pass the all-headers field of the force-key-unit event to the subclass
2011-11-29 12:12:04 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Implement full support for the new force-key-unit event
Including support for the running-time and count fields.
2011-11-29 09:31:11 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Use new force-keyunit event API from gst-plugins-base
2011-11-29 09:18:19 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Adjusting padding is not required for -bad libraries
2011-11-28 19:48:01 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.h:
basevideoencoder: Move some fields to the private part of the instance struct
2011-11-28 19:36:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Make headers metadata writable before pushing downstream
The timestamp, duration, etc of the headers has to be changed.
2011-11-28 19:35:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Push the downstream force-keyframe event after the next keyframe
Even if the corresponding GstVideoFrame doesn't have the is_sync_point
flag set.
2011-11-28 19:29:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Don't push an upstream force-keyunit event downstream
2011-11-25 11:48:08 +0100 Jonas Larsson <jonas@hallerud.se>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Add initial support for the all-headers field of the force-keyframe event
See bug #607742.
2011-11-25 11:37:39 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: some more debug logging
2011-11-23 20:03:32 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
basevideodecoder: add API to drop a frame and post a QoS message on the bus
https://bugzilla.gnome.org/show_bug.cgi?id=640017
API: gst_base_video_decoder_drop_frame()
2011-11-22 23:04:49 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstbasevideodecoder.c:
docs: fix comment in gst_base_video_decoder_get_max_decode_time() docs
2011-11-22 19:57:07 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: fix weird event list handling
Get rid of weird code that copies a list manually, taking
ownership of the elements and then frees the old list. Instead,
just take over the old list entirely. (If the intent was to
reverse the list, one could use g_list_reverse() instead).
Then, push events in the list out from last to first (since they
were prepended as they came in) instead of just pushing out the
last in the list and leaking the others.
2011-11-25 11:31:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/Makefile.am:
* omx/gstbaseaudiodecoder.c:
* omx/gstbaseaudiodecoder.h:
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
* omx/gstbaseaudioutils.c:
* omx/gstbaseaudioutils.h:
* omx/gstomxaacenc.c:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Use audio base classes from gst-plugins-base instead of having our own copies
2011-11-18 10:00:31 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-18 09:59:43 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-18 09:58:58 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: First set ports to flushing before waiting for the srcpad streaming thread to finish
2011-11-17 14:38:54 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Only disabling of a port is like flushing, enabling is like unflushing
2011-11-17 13:33:35 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Enabling/disabling a port is also like flushing
The component returns all buffers to us and shouldn't get any
new buffers passed anymore.
2011-11-17 11:26:33 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Signal the drain GCond even if downstream returned an error
2011-11-17 11:26:20 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Signal the drain GCond even if downstream returned an error
2011-11-17 11:25:52 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Signal the drain GCond even if downstream returned an error
2011-11-17 10:34:19 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Only call ::reset once in READY->PAUSED
2011-11-17 10:19:35 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-17 10:19:30 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-17 10:19:10 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Shutdown component in PAUSED->READY and deallocate buffers
2011-11-16 12:02:08 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Set force_keyframe to FALSE after handling it
There's no reason why the base class should forward the event
further downstream if we already handled it and will insert a
keyframe.
2011-11-16 11:21:25 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Always push buffers downstream, even if we didn't find a corresponding GstVideoFrame
2011-11-15 09:47:55 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Fix debug level for flushing in wrong state from ERROR to DEBUG
It's not really an error and doesn't matter at all if flush is called
when the component is not running.
2011-11-15 08:40:07 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: Detect bytestream stream format and don't put SPS/PPS into the caps for this format
2011-11-15 08:28:32 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Add vfunc for handling the output frames
This can be used by subclasses to override the buffer flags
or to handle some frames differently than the default behaviour.
2011-11-14 12:50:26 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't release buffers twice if dropping because of QoS
2011-11-14 09:13:06 -0800 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add XXX to the nOffset reset hack comment for QCOM
2011-11-10 15:18:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Make srcpad caps setting threadsafe
2011-11-10 15:17:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Make srcpad caps setting threadsafe
2011-11-10 15:17:41 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make srcpad caps setting threadsafe
2011-11-10 15:10:14 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Make the srcpad task and the sinkpad streaming thread handling threadsafe
2011-11-10 15:03:05 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Always flush the ports and make sure no processing is happening in ::flush
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-10 15:02:22 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Always flush the ports and make sure no processing is happening in ::reset
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-10 15:01:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix minor race condition when draining after upstream signalled EOS
2011-11-10 14:56:19 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Improve EOS handling
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-10 14:56:11 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Improve EOS handling
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-10 14:54:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Improve debugging of EOS and draining
2011-11-10 14:54:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Improve debugging of EOS and draining
2011-11-10 14:51:06 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Log if acquiring buffer for EOS failed
2011-11-10 14:42:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: The component is not started in READY
2011-11-10 14:39:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: No need to signal the drain cond when going from READY to PAUSED
Also the component is not started in READY
2011-11-10 14:40:56 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: No need to signal the drain cond when going from READY to PAUSED
Also the component is not started in READY.
2011-11-09 15:46:02 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Always flush the ports and make sure no processing is happening in ::reset
This fixes a race condition that happened when seeking
very often in a short period of time.
2011-11-09 15:45:20 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix minor race condition when draining after upstream signalled EOS
2011-11-09 15:44:11 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve EOS handling
If downstream return UNEXPECTED we should still signal the
drain cond because nothing will trigger this again later.
2011-11-09 15:43:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve debugging of EOS and draining
2011-11-09 15:42:46 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: The component is not started already when going from READY to PAUSED
2011-11-09 15:42:13 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: No need to signal the drain cond when going from READY to PAUSED
2011-11-09 15:41:02 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always reset buffer flags for output ports, even in flushing/error state
2011-11-09 09:00:57 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Improve debugging in case of QoS-related frame drops
2011-11-08 12:46:31 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Release the video codec stream lock before acquiring an input buffer
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 12:45:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Release the audio encoder stream lock before acquiring an input buffer
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 12:42:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Release the video codec stream lock before acquiring an input buffer
Otherwise the srcpad task might block on this lock and
no buffers ever become available again.
2011-11-08 11:07:01 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Don't try to drain the component after EOS
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 11:03:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Don't try to drain the component after EOS
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 10:46:36 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Don't try to drain the component after EOS
And don't send EOS twice in any case. This most likely
will cause the component to not output it again and
is not necessary anyway.
2011-11-08 09:09:28 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Implement dropping of too late frames via QoS
2011-11-08 08:31:58 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Minor code refactoring
2011-11-08 08:31:43 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Minor code refactoring
2011-11-08 08:31:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Make sure to always release buffers back to OMX
2011-11-08 08:24:19 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Also properly release buffers when in error state
2011-11-08 08:22:08 +0100 Jonas Larsson <Jonas.Larsson@palm.com>
* omx/gstomx.c:
omx: Properly release buffers during flushing
We can't pass them back to OMX_FillThisBuffer() or OMX_EmptyThisBuffer()
but instead of doing nothing we have to put them back into our queue.
Otherwise the buffer is leaked and we will have too few buffers in
the future.
2011-11-07 14:00:47 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Free pending frames after draining component
2011-11-07 14:00:35 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Free pending frames after draining the component
2011-11-07 11:07:01 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Make handling and usage of the base video codec frames threadsafe
2011-11-07 11:05:29 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix deadlock between srcpad stream lock and ::reset()
2011-11-07 11:04:27 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideoenc: Make handling and usage of the base video codec frames threadsafe
2011-11-07 10:58:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Free all pending frames after draining the component
2011-11-07 10:58:24 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Always free all pending frames when caps changes require reconfiguration
2011-11-04 09:43:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Only drain the component a single time and only after processing started
2011-11-04 09:43:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Only drain the component a single time and only after processing started
2011-11-04 09:43:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Only drain the component a single time and only after processing started
2011-11-04 09:04:16 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset buffer flags to 0 after it was consumed by the component or the element
Some implementations don't reset the flags and the standard is not
really clear on the expected behaviour. Let's just always reset the
flags as they're not valid at this point anymore.
2011-11-02 13:50:14 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Better handling of encoder parameters
Only set them if necessary and allow to use the component
defaults.
2011-11-02 13:22:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Make unsupported bitrate/quantizer settings less fatal
2011-11-02 10:39:50 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: If no stride was set for the OMX output port assume GStreamer stride
This is not really correct but there's nothing else we could do.
2011-11-02 10:39:10 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: If no stride was set for the OMX input port assume GStreamer stride
This is not really correct but there's nothing else we could do.
2011-11-01 16:46:09 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Implement draining of the component and use it
This makes sure that all buffers are encoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:41:46 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Implement draining of the component and use it
This makes sure that all buffers are encoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:08:59 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Implement draining of the component and use it
This makes sure that all buffers are decoded and pushed downstream
before flushing the ports and losing some buffers.
2011-10-20 14:32:40 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix deadlock if ::reset is called before finding the corresponding frame of a decoded buffer
2011-11-01 15:10:12 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
* omx/gstomxvideoenc.h:
omxaudioenc: Forward downstream flow returns to upstream
2011-11-01 15:10:01 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Forward downstream flow returns to upstream
2011-11-01 13:58:38 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Forward downstream flow returns to upstream
2011-10-25 14:23:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* README:
omx: Add minimal README file
2011-10-20 15:21:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock
2011-10-20 15:20:47 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock
2011-10-20 14:30:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Move locking at the correct place
2011-10-14 10:27:47 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Remove QCOM hack to reset nOffset in EmptyBufferDone
This is now done in a generic way that does not require any
hacks because it will work without any side effects on any
OMX implementation.
2011-10-14 10:26:00 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset nOffset to 0 in EmptyBufferDone if nFilledLen is 0
Some OMX implementations don't reset nOffset when the complete
buffer is emptied but instead only reset nFilledLen. We reset
nOffset to 0 if nFilledLen == 0, which is safe to do because
the offset *must* be 0 if the buffer is not filled at all.
Seen in QCOM's OMX implementation.
2011-10-04 10:56:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: If one parameter/configuration is not supported don't skip the next
2011-10-03 09:12:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
omxh264dec: Require stream-format=byte-stream
Other stream-formats are unlikely to be supported by OMX components.
2011-09-29 10:37:32 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Add API for subclasses to prepare/convert frames
2011-09-27 15:08:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-27 15:08:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-27 15:05:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Switch to Idle first and wait before switching to Loaded and deallocating buffers
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-27 14:15:06 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omxvideodec: New hack for QCOM to recreate the component instead of reconfiguring it on caps changes
2011-09-27 12:13:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Change a g_assert() into a GST_WARNING_OBJECT()
2011-09-26 13:04:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add hack for Qualcomm's OMX implementation to manually reset nOffset in EmptyBufferDone
2011-09-23 17:02:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Add a check to prevent a zero-sized OMX buffer
2011-09-23 17:02:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Add some more checks for correct OMX buffer sizes
2011-09-23 15:53:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Add some more checks for OMX buffer sizes
2011-09-14 10:15:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxaudioenc.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omx: Wait until the Executing state is reached before calling OMX_FillThisBuffer()
This correctly works around the QCOM race condition that happens when calling
FTB after setting the new state and before reaching it.
2011-09-02 14:43:43 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Negotiate video format with downstream and what the component claims to support
2011-08-25 19:56:58 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: fix element leak
and this concludes an hour of yelling at the bloody test failing,
only to track down the problem not being in the test.
https://bugzilla.gnome.org/show_bug.cgi?id=657368
2011-08-19 09:20:39 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Release basevideocodec stream lock while waiting for a buffer
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-19 09:19:22 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Release basevideocodec stream lock while waiting for a buffer
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-18 10:24:26 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Fix deadlock
2011-08-18 10:03:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
baseaudiodecoder: Don't take the stream lock in the seek handler
This will lead to deadlocks
2011-08-18 10:02:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
basevideo: Fix locking, especially if both pads have different streaming threads
2011-08-18 09:42:02 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
basevideo: Don't call g_type_class_peek_parent() in class_init
This is already done by the GObject boilerplate macro
2011-08-18 09:40:46 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
baseaudiodecoder: Don't call g_type_class_peek_parent() in class_init
This is already done by the boilerplate macro
2011-08-18 09:34:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
* omx/gstbaseaudiodecoder.h:
baseaudiodecoder: Fix thread safety issues if both pads have different streaming threads
2011-08-18 09:17:04 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
baseaudiodecoder: Delay sending of serialized events to finish_frame()
2011-08-17 14:33:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Always require at least OMX_MIN_PCMPAYLOAD_MSEC per input buffer
2011-08-17 14:28:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
baseaudioencoder: Add support for requesting a minimum and maximum number of samples per frame
This extends the special case of a fixed number of samples per frame
that was supported before already.
2011-08-17 14:17:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Handle inbuf==NULL properly in ::handle_frame()
2011-08-17 13:04:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaacenc.c:
omxaacenc: Implement ::get_num_samples() vfunc
2011-08-17 13:03:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Add vfunc to get the number of samples inside a buffer
2011-08-17 11:34:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Release baseaudioencoder stream lock while waiting for a buffer in ::handle_frame()
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-17 11:34:04 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
baseaudioencoder: Fix thread safety issues if both pads have different streaming threads
2011-08-17 09:58:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudioencoder.c:
baseaudioencoder: Taking the OBJECT lock in reset() is not needed
2011-08-16 11:03:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxaudioenc.c:
omxaudioenc: Remove hack that only applies to the video encoder class
2011-08-16 10:49:21 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.conf:
* omx/gstomxaacenc.c:
* omx/gstomxaacenc.h:
omxaacenc: Add initial version of OpenMAX AAC encoder element
2011-08-15 15:10:04 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomxaudioenc.c:
* omx/gstomxaudioenc.h:
omxaudioenc: Add initial version of audio encoder base class
2011-08-15 14:14:11 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudioencoder.c:
baseaudioencoder: Delay sending of serialized events to finish_frame()
2011-08-15 13:06:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstbaseaudiodecoder.c:
* omx/gstbaseaudiodecoder.h:
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
audio: Integrate audio base classes into the build system and fixup
2011-08-15 12:56:00 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbaseaudiodecoder.c:
* omx/gstbaseaudiodecoder.h:
* omx/gstbaseaudioencoder.c:
* omx/gstbaseaudioencoder.h:
* omx/gstbaseaudioutils.c:
* omx/gstbaseaudioutils.h:
audio: Add audio decoder/encoder base classes
Taken from http://cgit.collabora.com/git/user/manauw/gst-plugins-bad.git/log/?h=baseaudio
2011-08-12 12:25:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Proxy the width/height/framerate/PAR constraints of downstream caps to upstream
This allows to specify constraints on the compressed downstream caps
by muxers or capsfilters, which will then be forwarded to upstream
and allows video converters to fulfill the constraints.
Code based on Mark Nauwelaerts audio encoder base class.
2011-08-12 12:13:45 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.h:
basevideoencoder: Remove old ::getcaps() comment
2011-08-12 12:06:23 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Remove ::get_caps() vfunc
Subclasses can set the caps more efficiently and this only
caused additional indirections.
2011-08-10 10:24:21 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideoenc.c:
omxvideoenc: Use "video/x-raw-yuv" as sink template caps instead of strict I420 caps
2011-08-10 10:23:39 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxmpeg4videodec.c:
omxmpeg4videodec: Don't require width/height on sink pad caps
2011-08-10 10:11:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263dec.c:
* omx/gstomxh264dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
* omx/gstomxwmvdec.c:
omxvideodec: Use "video/x-raw-yuv" as src template caps instead of strict I420 caps
2011-08-10 09:56:30 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Set the state back to StateLoaded even if an error happened
2011-08-10 09:49:57 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Don't hold any locks while calling OMX_SendCommand()
It might call into one of the callbacks and lead to deadlocks, e.g.
with the Qualcomm OMX implementation.
2011-08-10 09:32:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Move some code
2011-08-10 09:23:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Reset pending reconfigure output ports when changing the state from Executing to any lower state
2011-08-10 09:08:00 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Fix crash when setting last error after the ports were freed
2011-08-10 09:03:52 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Free component structure
2011-08-10 09:02:52 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Make component destruction safer
2011-08-10 08:53:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Set pAppPrivate of buffers to NULL when deallocating buffers
This prevents usage of freed memory later if the OMX component
has weird behaviour.
2011-08-10 08:52:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Set the state back to StateLoaded even if an error happened
2011-08-10 08:51:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add some assertions to check if the buffer pAppPrivate is still correct
2011-08-08 13:04:30 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
omx: Add parenthesis at correct places in the struct init macro
2011-08-08 12:12:58 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Only prevent setting a higher state if the component is in an error state
2011-08-03 16:02:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Use the cached video frame size instead of recalculating it
2011-08-03 15:35:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Improve debugging in param/config getter/setter wrappers
2011-08-03 13:10:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't abort if the color format is not supported but give a useful error message
2011-08-02 15:14:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh263enc.c:
* omx/gstomxh264enc.c:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxvideoenc.c:
omxvideoenc: Don't fail if setting the bitrate or profile is not supported by the component
Also always set/get the profile, even if there are no peer caps.
2011-08-02 15:14:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Make access to the list of frames threadsafe
2011-08-01 13:22:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add a hacks flag for the Qualcomm 7x30 OMX_FillThisBuffer() race and make it optional
2011-07-29 13:56:59 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Add workaround for QCOM 7x30 race condition
2011-07-29 12:06:21 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh263enc.c:
* omx/gstomxh263enc.h:
omxh263enc: Add H.263 encoder element
2011-07-29 11:26:39 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxmpeg4videoenc.c:
omxmpeg4videoenc: Add support for setting profile/level via caps
2011-07-28 14:14:45 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264enc.c:
omxh264enc: Add support for setting profile/level via caps
2011-07-28 12:58:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Add support for forcing the next frame to be a keyframe
2011-07-28 11:54:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Add support for setting bitrate/quantization related parameters
2011-07-28 10:23:08 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add wrapper functions for OMX_[GS]et{Config,Parameter}
2011-07-28 09:54:53 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Add macro to initialize OpenMAX structures
2011-07-28 09:08:38 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Don't output 0-byte buffers
2011-07-25 15:05:08 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Ensure that the pAppPrivate pointer in OMX buffers is set correctly
2011-07-25 13:19:06 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideoenc.c:
omxvideo{enc,dec}: Only set/unset flushing state on ports if they were created already
2011-07-25 12:01:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxwmvdec.c:
* omx/gstomxwmvdec.h:
omxwmvdec: Add WMV video decoder element
2011-07-25 11:44:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh263dec.c:
* omx/gstomxh263dec.h:
omxh263dec: Add H.263 decoder element
2011-07-25 11:32:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh264enc.c:
* omx/gstomxh264enc.h:
omxh264enc: Add H.264 encoder element
2011-07-25 10:48:58 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Try harder to deallocate the buffers after errors happened
2011-07-25 10:47:28 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Try harder to deallocate the buffers after errors happened
2011-07-25 10:46:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Deallocate port buffers before freeing the component
They should be deallocated by the caller before reaching the
Loaded state but to be on the safe side we will make sure
they're really deallocated here.
2011-07-21 11:15:14 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Add initial support for stride conversion
2011-07-21 10:38:26 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videoenc.c:
omx: Set default roles for the components if none were set from the config file
2011-07-21 10:36:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Failure to set the component role is fatal
2011-07-21 07:53:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Add support for setting codec_data on the srcpad caps
2011-07-21 07:44:34 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Free/drop GstVideoFrames that resulted in an empty buffer
2011-07-21 07:44:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Allow finishing of frames with no src_buffer to drop/free the GstVideoFrame
2011-07-21 07:31:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideoenc.c:
omxvideoenc: Remove obsolete TODO comment
2011-07-20 11:09:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
omx: Use libgstopenmax.so for the plugin filename and openmax for the plugin name
Resolves conflicts with gst-openmax.
2011-07-20 08:34:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.conf:
* omx/gstomx.h:
* omx/gstomxmpeg4videoenc.c:
* omx/gstomxmpeg4videoenc.h:
* omx/gstomxvideoenc.c:
* omx/gstomxvideoenc.h:
omxvideoenc: Add video encoder base class and MPEG4 video encoder
Unfortunately requires lots of hacks again to work properly with
Bellagio.
2011-07-20 10:39:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Only get caps from the subclass if they were not set yet by the subclass
2011-07-20 09:25:28 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Delay sending of serialized sink events until finish_frame()
2011-07-20 09:09:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
basevideoencoder: Add ::reset vfunc and handle ::reset/::finish the same way as in the decoder
2011-07-19 12:50:43 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideoencoder.c:
basevideoencoder: Use a temporary GstVideoState until the subclass accepted the caps
Also store the caps in the GstVideoState and assume a PAR of 1/1 instead
of 0/1 if no PAR is specified in the caps.
2011-07-19 12:29:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomxvideodec.c:
omx: Improve debug output a bit
2011-07-19 10:33:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Rework port reconfiguration again and only use the Bellagio specific hacks with Bellagio
We only reconfigure ports that need to be reconfigured now instead of
always all ports.
2011-07-19 10:33:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.conf:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omx: Add infrastructure to enable special hacks for broken OpenMAX implementations
2011-07-18 13:10:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: When acquiring a buffer from an input port always wait until all output ports are reconfigured
2011-07-18 08:41:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Add support for converting between omx and gst rowstrides
2011-07-14 10:34:09 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Provide all buffers to output ports after enabling them
2011-07-14 08:29:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Add support for NV12 / OMX_COLOR_FormatYUV420SemiPlanar
2011-07-14 07:58:41 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Only flush the component ports after we passed input to them
2011-07-13 21:19:34 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Only change states downwards if an upper state was reached
2011-07-13 20:37:02 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omx: Add support for setting the component-role
2011-07-13 20:22:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Improve error reporting by formatting the error codes better and also providing their string representation
2011-07-13 14:36:14 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
build: Dist autogen.sh
2011-07-13 14:35:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* omx/gstomx.c:
build: Only require GStreamer >= 0.10.29 and GLib >= 2.16
2011-07-13 14:04:47 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
build: Dist gstomx.conf
2011-07-13 14:04:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
build: Clean _stdint.h on "make distclean"
2011-07-13 14:02:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix typo
2011-07-13 13:59:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
omx: Dist gstomx.h
2011-07-13 12:46:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Set SYNCFRAME flag on the OMX buffers for non-delta units
2011-07-13 12:37:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Free all pending frames when resetting the decoder
Workaround for https://bugzilla.gnome.org/show_bug.cgi?id=654529
2011-07-13 09:59:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Handle output buffers without a corresponding GstVideoFrame more gracefully
This can happen on EOS in some cases and when the input is not
properly framed.
2011-07-13 09:31:22 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix deadlock when finishing old frames that are left over by the decoder
2011-07-12 11:37:28 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
omxh264dec: It's called H.264, not H264
2011-07-12 11:36:42 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Make sink/src pad template caps configurable
2011-07-12 11:13:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Allow to set a preferred configuration directory with the GST_OMX_CONFIG_DIR environment variable
2011-07-12 10:55:57 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264dec.c:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
omxvideodec: Make core/component-name and in/outport index configurable
2011-07-12 10:05:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.conf:
* omx/gstomx.h:
omx: Add initial version of configuration system
This now only registers elements that are specified in the
configuration file.
The configuration file is a keyfile in the first XDG configuration
directory with the name gstomx.conf.
2011-07-12 08:53:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh264dec.c:
* omx/gstomxh264dec.h:
* omx/gstomxh264videodec.c:
* omx/gstomxh264videodec.h:
omxh264dec: Rename from omxh264videodec to omxh264dec
2011-07-12 08:40:48 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxh264videodec.c:
omxh264videodec: Require alignment=au and stream-format={avc,bytestream}
2011-07-11 12:59:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: First inform subclass about resetting before resetting/freeing all internal state
The subclass might want to access the old state.
2011-07-11 12:36:42 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Track present position on discont before resetting it
2011-07-11 11:52:33 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Also protect the list of pending frames from concurrent access when pushing all pendings events
2011-07-11 11:28:40 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
basevideocodec: Protect access to the list of pending frames with the object lock
This is required if ::finish_frame() and all buffer output happens
on a different thread than the sinkpad streaming thread.
2011-07-11 09:35:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Set the correct lists to NULL after freeing
2011-07-11 08:54:53 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideodecoder.c:
basevideodecoder: Work with a copy of the GstVideoState in setcaps until the caps are accepted
Also fix a refcount problem with the codec_data.
2011-07-12 08:34:44 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomxh264videodec.c:
* omx/gstomxh264videodec.h:
omxh264videodec: Add h.264 video decoder
2011-07-12 08:29:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxmpeg4videodec.c:
omxmpeg4videodec: Fix debug category name
2011-07-09 11:41:42 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoutils.c:
* omx/gstbasevideoutils.h:
basevideo: Move the utils from the codec header to its own header
2011-07-09 11:32:06 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideodecoder.c:
basevideo: Use GSlice for allocating GstVideoFrame and don't duplicate code in the decoder base class
2011-07-09 11:05:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Use the destroy notify to free the coder_hook
2011-07-09 10:57:52 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
basevideo: Add destroy notify for the coder_hook to prevent memory leaks
Fixes bug #654293.
2011-07-09 10:44:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
basevideo: Fix GType names to not conflict with the public video base classes
It's still not possible to include headers of both in the same file
or compile/link both into the same plugin but that shouldn't be
necessary anyway.
2011-07-08 15:42:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Fix some minor memory leaks
2011-07-08 15:25:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Rework port reconfiguration
We always reconfigure all ports now if the settings of one
port changes to prevent lots of race conditions, dropped
frames and similar issues.
2011-07-08 13:16:45 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Use the frames storage of the base class instead of implementing our own
They could get out of sync and we could store already destroyed frames.
2011-07-07 12:51:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.h:
omx: Clarify GQueue/GPtrArray element types
2011-07-07 12:23:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxvideodec.c:
omx: Add more checks to acquire_buffer() and return the current state additional to the buffer
Also refactor the code flow in the video decoder for this. This makes
the usage of acquire_buffer() easier and more atomic.
2011-07-07 12:22:57 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Also flush/unflush the input port when changing the state PAUSED<->READY
2011-07-07 12:21:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Don't broadcast port->port_cond after allocating buffers successfully
Allocating buffers must happen while no thread is waiting for the
cond and especially must happen from the thread that would acquire
buffers from the port.
2011-07-07 11:27:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Don't leak the codec_data after sending it
2011-07-07 10:27:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always check if the component is in an error state before waiting for a condition variable to be signalled
Otherwise we might wait forever because nothing is going to signal
the condition variable anymore.
2011-07-07 10:22:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always hold port->port_lock before signalling port->port_cond when notifying about errors
Otherwise a port might be in the critical section, has checked the error state
already but waits after port->port_cond is signalled, which will lead
to a deadlock.
2011-07-07 10:07:43 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Remove reconfiguration test hack
2011-07-06 13:27:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Improve debug output a bit
2011-07-06 13:26:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Always try to deallocate buffers, even if there's a component error
2011-07-06 13:26:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
omx: Use G_USEC_PER_SEC for clarity instead of 1000000
2011-07-06 13:19:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Error out if the GStreamer allocated buffer is smaller than the OpenMAX output buffer
Usually this must never happen but currently it happens during reconfigurations
because of a race condition. Still it's better than crashing.
2011-07-06 10:40:13 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Don't use port_def.bEnabled to check if the Enable/Disable command is finished
bEnabled should be set immediately after sending the command, it's only
Bellagio that waits until the command is finished before setting it.
2011-07-06 10:30:11 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxvideodec.c:
omxvideodec: Remove obsolete FIXME comment
2011-07-06 10:29:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomx.c:
* omx/gstomx.h:
omx: Improve error handling and reporting
2011-07-06 08:48:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstomxmpeg4videodec.c:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omxvideodec: Make the inport and outport index configurable by the subclass
2011-06-28 08:51:23 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/Makefile.am:
* omx/gstomx.c:
* omx/gstomx.h:
* omx/gstomxmpeg4videodec.c:
* omx/gstomxmpeg4videodec.h:
* omx/gstomxvideodec.c:
* omx/gstomxvideodec.h:
omx: Add initial version of OpenMAX framework, video decoder base class and MPEG4 video decoder
This currently hardcodes a lot of stuff but works at least.
Also adds a generic framework for handling OpenMAX cores, components
and ports.
2011-06-28 11:47:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
basevideodecoder: Don't reorder serialized src events
And allow to drop EOS by the subclass if ::finish returns
DROPPED.
Fixes bug #653544.
2011-06-27 09:41:40 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
basevideo: Add the caps to the GstVideoState and clean up caps/codec_data properly
2011-06-27 09:37:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/gstbasevideocodec.c:
* omx/gstbasevideocodec.h:
* omx/gstbasevideodecoder.c:
* omx/gstbasevideodecoder.h:
* omx/gstbasevideoencoder.c:
* omx/gstbasevideoencoder.h:
* omx/gstbasevideoutils.c:
basevideo: Add video encoder/decoder base classes from gst-plugins-bad
2011-06-21 11:17:35 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* omx/openmax/OMX_Audio.h:
* omx/openmax/OMX_Component.h:
* omx/openmax/OMX_ComponentExt.h:
* omx/openmax/OMX_ContentPipe.h:
* omx/openmax/OMX_Core.h:
* omx/openmax/OMX_CoreExt.h:
* omx/openmax/OMX_IVCommon.h:
* omx/openmax/OMX_Image.h:
* omx/openmax/OMX_Index.h:
* omx/openmax/OMX_IndexExt.h:
* omx/openmax/OMX_Other.h:
* omx/openmax/OMX_Types.h:
* omx/openmax/OMX_Video.h:
* omx/openmax/OMX_VideoExt.h:
openmax: Add OpenMAX IL 1.1.2 headers