gst-build

GStreamer meson based repositories aggregrator.

Check out this module and run meson on it, and it will git clone the other GStreamer modules as meson subprojects and build everything in one go. Once that is done you can switch into an development environment which allows you to easily develop and test the latest version of GStreamer without the need to install anything or touch an existing GStreamer system installation.

Getting started

Install git and python 3.5+

If you're on Linux, you probably already have these. On macOS, you can use the official Python installer.

You can find instructions for Windows below.

Install meson and ninja

Meson 0.48 or newer is required.

On Linux and macOS you can get meson through your package manager or using:

$ pip3 install --user meson

This will install meson into ~/.local/bin which may or may not be included automatically in your PATH by default.

You should get ninja using your package manager or download the official release and put the ninja binary in your PATH.

You can find instructions for Windows below.

Build GStreamer and its modules

You can get all GStreamer built running:

meson build/
ninja -C build/

This will automatically create the build directory and build everything inside it.

NOTE: On Windows, you must run this from inside the Visual Studio command prompt of the appropriate architecture and version.

Development environment

Building the Qt5 QML plugin

If qmake is not in PATH and pkgconfig files are not available, you can point the QMAKE env var to the Qt5 installation of your choosing before running meson as shown above.

The plugin will be automatically enabled if possible, but you can ensure that it is built by passing -Dgst-plugins-good:qt5=enabled to meson. This will cause Meson to error out if the plugin could not be enabled. This also works for all plugins in all GStreamer repositories.

Development environment target

gst-build also contains a special devenv target that lets you enter an development environment where you will be able to work on GStreamer easily. You can get into that environment running:

ninja -C build/ devenv

If your operating system handles symlinks, built modules source code will be available at the root of gst-build/ for example GStreamer core will be in gstreamer/. Otherwise they will be present in subprojects/. You can simply hack in there and to rebuild you just need to rerun ninja -C build/.

NOTE: In the development environment, a fully usable prefix is also configured in gst-build/prefix where you can install any extra dependency/project.

An external script can be run in development environment with:

./gst-env.py external_script.sh

Update git subprojects

We added a special update target to update subprojects (it uses git pull --rebase meaning you should always make sure the branches you work on are following the right upstream branch, you can set it with git branch --set-upstream-to origin/master if you are working on gst-build master branch).

Update all GStreamer modules and rebuild:

ninja -C build/ update

Update all GStreamer modules without rebuilding:

ninja -C build/ git-update

Custom subprojects

We also added a meson option, custom_subprojects, that allows the user to provide a comma-separated list of subprojects that should be built alongside the default ones.

To use it:

cd subprojects
git clone my_subproject
cd ../build
rm -rf * && meson .. -Dcustom_subprojects=my_subproject
ninja

Run tests

You can easily run the test of all the components:

meson test -C build

To list all available tests:

meson test -C build --list

To run all the tests of a specific component:

meson test -C build --suite gst-plugins-base

Or to run a specific test file:

meson test -C build/ --suite gstreamer gst_gstbuffer

Run a specific test from a specific test file:

GST_CHECKS=test_subbuffer meson test -C build/ --suite gstreamer gst_gstbuffer

Optional Installation

gst-build has been created primarily for development usage, but you can also install everything that is built into a predetermined prefix like so:

meson --prefix=/path/to/install/prefix build/
ninja -C build/
meson install -C build/

Note that the installed files have RPATH stripped, so you will need to set LD_LIBRARY_PATH, DYLD_LIBRARY_PATH, or PATH as appropriate for your platform for things to work.

Checkout another branch using worktrees

If you need to have several versions of GStreamer coexisting (eg. master and 1.14), you can use the checkout-branch-worktree script provided by gst-build. It allows you to create a new gst-build environment with new checkout of all the GStreamer modules as git worktrees.

For example to get a fresh checkout of gst-1.14 from a gst-build in master already built in a build directory you can simply run:

./checkout-branch-worktree ../gst-build-1.14 origin/1.14 -C build/

This will create a new gst-build-1.14 folder at the same level of gst-build pointing to the given branch ie 1.14 for all the subprojects ( gstreamer, gst-plugins-base etc.)

Add information about GStreamer development environment in your prompt line

Bash prompt

We automatically handle bash and set $PS1 accordingly.

If the automatic $PS1 override is not desired (maybe you have a fancy custom prompt), set the $GST_BUILD_DISABLE_PS1_OVERRIDE environment variable to TRUE and use $GST_ENV when setting the custom prompt, for example with a snippet like the following:

...
if [[ -n "${GST_ENV-}" ]];
then
  PS1+="[ ${GST_ENV} ]"
fi
...

Using powerline

In your powerline theme configuration file (by default in {POWERLINE INSTALLATION DIR}/config_files/themes/shell/default.json) you should add a new environment segment as follow:

{
  "function": "powerline.segments.common.env.environment",
  "args": { "variable": "GST_ENV" },
  "priority": 50
},

Windows Prerequisites Setup

On Windows, some of the components may require special care.

Git for Windows

Use the Git for Windows installer. It will install a bash prompt with basic shell utils and up-to-date git binaries.

During installation, when prompted about PATH, you should select the following option:

Python 3.5+ on Windows

Use the official Python installer. You must ensure that Python is installed into PATH:

You may also want to customize the installation and install it into a system-wide location such as C:\PythonXY, but this is not required.

Ninja on Windows

The easiest way to install Ninja on Windows is with pip3, which will download the compiled binary and place it into the Scripts directory inside your Python installation:

pip3 install ninja

You can also download the official release and place it into PATH.

Meson on Windows

IMPORTANT: Do not use the Meson MSI installer since it is experimental and known to not work with gst-build.

You can use pip3 to install Meson, same as Ninja above:

pip3 install meson

Note that Meson is written entirely in Python, so you can also run it as-is from the git repository if you want to use the latest master branch for some reason.

Setup a mingw/wine based development environment on linux

Install wine and mingw

On fedora x64

sudo dnf install mingw64-gcc mingw64-gcc-c++ mingw64-pkg-config mingw64-winpthreads wine

FIXME: Figure out what needs to be installed on other distros

Get meson from git

This simplifies the process and allows us to use the cross files defined in meson itself.

git clone https://github.com/mesonbuild/meson.git

Build and install

BUILDDIR=$PWD/winebuild/
export WINEPREFIX=$BUILDDIR/wine-prefix/ && mkdir -p $WINEPREFIX
# Setting the prefix is mandatory as it is used to setup symlinks during uninstalled development
meson/meson.py $BUILDDIR --cross-file meson/cross/linux-mingw-w64-64bit.txt -Dgst-plugins-bad:vulkan=disabled -Dorc:gtk_doc=disabled --prefix=$BUILDDIR/wininstall/ -Djson-glib:gtk_doc=disabled
meson/meson.py install -C $BUILDDIR/

NOTE: You should use meson install -C $BUILDDIR each time you make a change instead of the usual ninja -C build as the environment is not uninstalled.

The development environment

You can get into the development environment the usual way:

ninja -C $BUILDDIR/ devenv

After setting up binfmt to use wine for windows binaries, you can run GStreamer tools under wine by running:

gst-launch-1.0.exe videotestsrc ! glimagesink