15 KiB
Basic tutorial 13: Playback speed
This page last changed on Jul 06, 2012 by xartigas.
Goal
Fast-forward, reverse-playback and slow-motion are all techniques collectively known as trick modes and they all have in common that modify the normal playback rate. This tutorial shows how to achieve these effects and adds frame-stepping into the deal. In particular, it shows:
- How to change the playback rate, faster and slower than normal, forward and backwards.
- How to advance a video frame-by-frame
Introduction
Fast-forward is the technique that plays a media at a speed higher than its normal (intended) speed; whereas slow-motion uses a speed lower than the intended one. Reverse playback does the same thing but backwards, from the end of the stream to the beginning.
All these techniques do is change the playback rate, which is a variable equal to 1.0 for normal playback, greater than 1.0 (in absolute value) for fast modes, lower than 1.0 (in absolute value) for slow modes, positive for forward playback and negative for reverse playback.
GStreamer provides two mechanisms to change the playback rate: Step Events and Seek Events. Step Events allow skipping a given amount of media besides changing the subsequent playback rate (only to positive values). Seek Events, additionally, allow jumping to any position in the stream and set positive and negative playback rates.
In Basic tutorial 4: Time management seek events have already been shown, using a helper function to hide their complexity. This tutorial explains a bit more how to use these events.
Step Events are a more convenient way of changing the playback rate, due to the reduced number of parameters needed to create them; however, their implementation in GStreamer still needs a bit more polishing so Seek Events are used in this tutorial instead.
To use these events, they are created and then passed onto the pipeline,
where they propagate upstream until they reach an element that can
handle them. If an event is passed onto a bin element like playbin2,
it will simply feed the event to all its sinks, which will result in
multiple seeks being performed. The common approach is to retrieve one
of playbin2’s sinks through the video-sink or
audio-sink properties and feed the event directly into the sink.
Frame stepping is a technique that allows playing a video frame by frame. It is implemented by pausing the pipeline, and then sending Step Events to skip one frame each time.
A trick mode player
Copy this code into a text file named basic-tutorial-13.c.
 |
This tutorial is included in the SDK since release 2012.7. If you cannot find it in the downloaded code, please install the latest release of the GStreamer SDK. |
basic-tutorial-13.c
#include <string.h>
#include <gst/gst.h>
typedef struct _CustomData {
GstElement *pipeline;
GstElement *video_sink;
GMainLoop *loop;
gboolean playing; /* Playing or Paused */
gdouble rate; /* Current playback rate (can be negative) */
} CustomData;
/* Send seek event to change rate */
static void send_seek_event (CustomData *data) {
gint64 position;
GstFormat format = GST_FORMAT_TIME;
GstEvent *seek_event;
/* Obtain the current position, needed for the seek event */
if (!gst_element_query_position (data->pipeline, &format, &position)) {
g_printerr ("Unable to retrieve current position.\n");
return;
}
/* Create the seek event */
if (data->rate > 0) {
seek_event = gst_event_new_seek (data->rate, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_ACCURATE,
GST_SEEK_TYPE_SET, position, GST_SEEK_TYPE_NONE, 0);
} else {
seek_event = gst_event_new_seek (data->rate, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_ACCURATE,
GST_SEEK_TYPE_SET, 0, GST_SEEK_TYPE_SET, position);
}
if (data->video_sink == NULL) {
/* If we have not done so, obtain the sink through which we will send the seek events */
g_object_get (data->pipeline, "video-sink", &data->video_sink, NULL);
}
/* Send the event */
gst_element_send_event (data->video_sink, seek_event);
g_print ("Current rate: %g\n", data->rate);
}
/* Process keyboard input */
static gboolean handle_keyboard (GIOChannel *source, GIOCondition cond, CustomData *data) {
gchar *str = NULL;
if (g_io_channel_read_line (source, &str, NULL, NULL, NULL) != G_IO_STATUS_NORMAL) {
return TRUE;
}
switch (g_ascii_tolower (str[0])) {
case 'p':
data->playing = !data->playing;
gst_element_set_state (data->pipeline, data->playing ? GST_STATE_PLAYING : GST_STATE_PAUSED);
g_print ("Setting state to %s\n", data->playing ? "PLAYING" : "PAUSE");
break;
case 's':
if (g_ascii_isupper (str[0])) {
data->rate *= 2.0;
} else {
data->rate /= 2.0;
}
send_seek_event (data);
break;
case 'd':
data->rate *= -1.0;
send_seek_event (data);
break;
case 'n':
if (data->video_sink == NULL) {
/* If we have not done so, obtain the sink through which we will send the step events */
g_object_get (data->pipeline, "video-sink", &data->video_sink, NULL);
}
gst_element_send_event (data->video_sink,
gst_event_new_step (GST_FORMAT_BUFFERS, 1, data->rate, TRUE, FALSE));
g_print ("Stepping one frame\n");
break;
case 'q':
g_main_loop_quit (data->loop);
break;
default:
break;
}
g_free (str);
return TRUE;
}
int main(int argc, char *argv[]) {
CustomData data;
GstStateChangeReturn ret;
GIOChannel *io_stdin;
/* Initialize GStreamer */
gst_init (&argc, &argv);
/* Initialize our data structure */
memset (&data, 0, sizeof (data));
/* Print usage map */
g_print (
"USAGE: Choose one of the following options, then press enter:\n"
" 'P' to toggle between PAUSE and PLAY\n"
" 'S' to increase playback speed, 's' to decrease playback speed\n"
" 'D' to toggle playback direction\n"
" 'N' to move to next frame (in the current direction, better in PAUSE)\n"
" 'Q' to quit\n");
/* Build the pipeline */
data.pipeline = gst_parse_launch ("playbin2 uri=http://docs.gstreamer.com/media/sintel_trailer-480p.webm", NULL);
/* Add a keyboard watch so we get notified of keystrokes */
#ifdef _WIN32
io_stdin = g_io_channel_win32_new_fd (fileno (stdin));
#else
io_stdin = g_io_channel_unix_new (fileno (stdin));
#endif
g_io_add_watch (io_stdin, G_IO_IN, (GIOFunc)handle_keyboard, &data);
/* Start playing */
ret = gst_element_set_state (data.pipeline, GST_STATE_PLAYING);
if (ret == GST_STATE_CHANGE_FAILURE) {
g_printerr ("Unable to set the pipeline to the playing state.\n");
gst_object_unref (data.pipeline);
return -1;
}
data.playing = TRUE;
data.rate = 1.0;
/* Create a GLib Main Loop and set it to run */
data.loop = g_main_loop_new (NULL, FALSE);
g_main_loop_run (data.loop);
/* Free resources */
g_main_loop_unref (data.loop);
g_io_channel_unref (io_stdin);
gst_element_set_state (data.pipeline, GST_STATE_NULL);
if (data.video_sink != NULL)
gst_object_unref (data.video_sink);
gst_object_unref (data.pipeline);
return 0;
}
|
 Need help? (Click to expand)
If you need help to compile this code, refer to the Building the tutorials section for your platform: Linux, Mac OS X or Windows, or use this specific command on Linux:
If you need help to run this code, refer to the Running the tutorials section for your platform: Linux, Mac OS X or Windows This tutorial opens a window and displays a movie, with accompanying audio. The media is fetched from the Internet, so the window might take a few seconds to appear, depending on your connection speed. The console shows the available commands, composed of a single upper-case or lower-case letter, which you should input followed by the Enter key. Required libraries: |
Walkthrough
There is nothing new in the initialization code in the main function: a
playbin2 pipeline is instantiated, an I/O watch is installed to track
keystrokes and a GLib main loop is executed.
Then, in the keyboard handler function:
/* Process keyboard input */
static gboolean handle_keyboard (GIOChannel *source, GIOCondition cond, CustomData *data) {
gchar *str = NULL;
if (g_io_channel_read_line (source, &str, NULL, NULL, NULL) != G_IO_STATUS_NORMAL) {
return TRUE;
}
switch (g_ascii_tolower (str[0])) {
case 'p':
data->playing = !data->playing;
gst_element_set_state (data->pipeline, data->playing ? GST_STATE_PLAYING : GST_STATE_PAUSED);
g_print ("Setting state to %s\n", data->playing ? "PLAYING" : "PAUSE");
break;
Pause / Playing toggle is handled with gst_element_set_state() as in
previous tutorials.
case 's':
if (g_ascii_isupper (str[0])) {
data->rate *= 2.0;
} else {
data->rate /= 2.0;
}
send_seek_event (data);
break;
case 'd':
data->rate *= -1.0;
send_seek_event (data);
break;
Use ‘S’ and ‘s’ to double or halve the current playback rate, and ‘d’ to
reverse the current playback direction. In both cases, the
rate variable is updated and send_seek_event is called. Let’s
review this function.
/* Send seek event to change rate */
static void send_seek_event (CustomData *data) {
gint64 position;
GstFormat format = GST_FORMAT_TIME;
GstEvent *seek_event;
/* Obtain the current position, needed for the seek event */
if (!gst_element_query_position (data->pipeline, &format, &position)) {
g_printerr ("Unable to retrieve current position.\n");
return;
}
This function creates a new Seek Event and sends it to the pipeline to
update the rate. First, the current position is recovered with
gst_element_query_position(). This is needed because the Seek Event
jumps to another position in the stream, and, since we do not actually
want to move, we jump to the current position. Using a Step Event would
be simpler, but this event is not currently fully functional, as
explained in the Introduction.
/* Create the seek event */
if (data->rate > 0) {
seek_event = gst_event_new_seek (data->rate, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_ACCURATE,
GST_SEEK_TYPE_SET, position, GST_SEEK_TYPE_NONE, 0);
} else {
seek_event = gst_event_new_seek (data->rate, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_ACCURATE,
GST_SEEK_TYPE_SET, 0, GST_SEEK_TYPE_SET, position);
}
The Seek Event is created with gst_event_new_seek(). Its parameters
are, basically, the new rate, the new start position and the new stop
position. Regardless of the playback direction, the start position must
be smaller than the stop position, so the two playback directions are
treated differently.
if (data->video_sink == NULL) {
/* If we have not done so, obtain the sink through which we will send the seek events */
g_object_get (data->pipeline, "video-sink", &data->video_sink, NULL);
}
As explained in the Introduction, to avoid performing multiple Seeks,
the Event is sent to only one sink, in this case, the video sink. It is
obtained from playbin2 through the video-sink property. It is read
at this time instead at initialization time because the actual sink may
change depending on the media contents, and this won’t be known until
the pipeline is PLAYING and some media has been read.
/* Send the event */
gst_element_send_event (data->video_sink, seek_event);
The new Event is finally sent to the selected sink with
gst_element_send_event().
Back to the keyboard handler, we still miss the frame stepping code, which is really simple:
case 'n':
if (data->video_sink == NULL) {
/* If we have not done so, obtain the sink through which we will send the step events */
g_object_get (data->pipeline, "video-sink", &data->video_sink, NULL);
}
gst_element_send_event (data->video_sink,
gst_event_new_step (GST_FORMAT_BUFFERS, 1, data->rate, TRUE, FALSE));
g_print ("Stepping one frame\n");
break;
A new Step Event is created with gst_event_new_step(), whose
parameters basically specify the amount to skip (1 frame in the example)
and the new rate (which we do not change).
The video sink is grabbed from playbin2 in case we didn’t have it yet,
just like before.
And with this we are done. When testing this tutorial, keep in mind that backward playback is not optimal in many elements.
 |
Changing the playback rate might only work with local files. If you cannot modify it, try changing the URI passed to |
Conclusion
This tutorial has shown:
- How to change the playback rate using a Seek Event, created with
gst_event_new_seek()and fed to the pipeline withgst_element_send_event(). - How to advance a video frame-by-frame by using Step Events, created
with
gst_event_new_step().
It has been a pleasure having you here, and see you soon!
Attachments:
basic-tutorial-13.c (text/plain)
vs2010.zip (application/zip)
Document generated by Confluence on Oct 08, 2015 10:27