Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_chain):
Properly set the last_stop position on GstSegment. This will only happen
if there is a buffer to push out.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
always_in_place does not mean that the sink and source caps are the
same! Make sure we don't blindly proxy the buffer_alloc in this case.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_activate):
Make sure streaming has finished before calling the ::stop() vfunc,
since that vfunc might clear state which is being used in the
streaming thread. This fixes a race that caused crashes in
audioresample when shutting down a pipeline (#420106).
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_check_get_range):
Implement a checkgetrange function instead of relying on the default
core behaviour that assumes we can operate in pull mode if we have a
getrange function. First step at fixing #385084.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (gst_base_transform_activate):
Factor start/stop into this private function instead of partially
in activate functions and partially in the change_state function.
Fixes setup before the element has changed from READY->PAUSED, as
is the case in pull-mode pipelines.
(gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull): Refactor to use
gst_base_transform_activate().
(gst_base_transform_change_state): Removed, not needed any more.
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Truncate before fixating.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (_GstBaseTransformPrivate):
(gst_base_transform_init, gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull):
Track the activation mode.
(gst_base_transform_setcaps): In pull mode, when activating the
src pad, after activating the sink pad, activate the sink pad's
peer, as discussed in part-negotiation.txt.
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesrc.c (gst_base_src_fixate): Add fixate
vmethod, as in basesink.
* libs/gst/base/gstbasesink.h: Reformat docs, add fixate vmethod.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_setcaps): In pull
mode, first proxy the setcaps to the peer pad.
(gst_base_sink_pad_fixate): Add a fixate function that calls the
new fixate vmethod.
(gst_base_sink_default_activate_pull): Rename from
gst_base_sink_activate_pull.
(gst_base_sink_negotiate_pull): New function, performs negotiation
in pull mode before calling ::activate_pull().
(gst_base_sink_pad_activate_pull): Actually call the activate_pull
vmethod instead of the default implementation. I have no idea how
this worked before. Negotiate before calling activate_pull.
Original commit message from CVS:
* gst/gstevent.h:
Add small comment.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
Debug segment values *after* updating them as this is more
interesting.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check if requested caps are the same as the sinks caps IF
->have_same_caps is TRUE. If they are not, act as if have_same_caps
is FALSE.
This fixes the renegotiation issues stated in #352827.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstcaps.c: (gst_structure_is_equal_foreach),
(gst_caps_merge):
* gst/gstcaps.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
API: Add gst_caps_merge() and use it in basetransform, fixes#345444
in a better way
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Only call downstream buffer_alloc if transform element is passthrough
or always_in_place. Closes#350449.
Original commit message from CVS:
* gst/gst.c:
* gst/gstpad.c: (gst_pad_set_active):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Simplify caps to get rid of duplicates, fixes#345444
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Even if we can't figure out the proper format to request downstream,
call buffer_alloc() downstream with the input parameters without setting
the caps on the srcpad. This will force negotiation in the chain
function.
Closes#350449
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Use OBJECT_LOCK and refcounting to get the pad caps in the
buffer_alloc function because the caps could change while we are
busy with them. Fixes#349105
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Extra debug output
* tests/check/libs/gdp.c: (gst_dp_suite):
Take a whack at fixing the ppc compile using a different define to
disable the broken test.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Remove excess g_print()
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
Make sure the buffer we pass to transform_ip has a refcount of
1 and thus is writable. Fixes#343196
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Forgot to remove two unneeded unrefs.
Simplify a check _is_equal allready checks the obvious case.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_replace):
Fix crasher when passed NULL. Doc clarification.
Optimize for the trivial case.
* gst/gstpipeline.c: (gst_pipeline_change_state):
Small cleanups.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Small documentation cleanup.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't use silly gst_pad_get_negotiated_caps, GST_PAD_CAPS
is what we need and it avoids a whole lot of redundant
refcount operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_preroll_object), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
Don't randomly and silently reset a segment when the format
changes as this is a bug somewhere upstream. Fixes#330379.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
make sure GstBaseTransformClass shows up in the docs
* libs/gst/base/gstbasetransform.c:
* libs/gst/base/gstbasetransform.h:
move docs so gtk-doc picks it up now
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
Original commit message from CVS:
2006-04-05 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_set_blocked_async): More debug.
* libs/gst/base/gstbasetransform.c
(gst_base_transform_sink_eventfunc): When resetting our segment on
FLUSH_STOP, also update the flag saying we haven't seen a
newsegment.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Make sure caps are writable before passing them to
gst_caps_append().
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_change_state): Fix a stupid bug. I was
sure i compiled that.
------------------------------------------------------
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_change_state): Make basetransform reusable.
(Closes#331898)
------------------------------------------------------
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstcollectpads.c (gst_collect_pads_chain): Only
update last_stop if we're in TIME format and the timestamp is
valid.
* libs/gst/base/gstcollectpads.c (gst_collect_pads_event)
* libs/gst/base/gstbasetransform.c (gst_base_transform_eventfunc):
* libs/gst/base/gstbasesink.c (gst_base_sink_configure_segment):
If we get a new newsegment with a different format, adapt
accordingly.
* gst/gstclock.c (gst_clock_set_calibration): Accept a numerator
of 0. Not a problem, really.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_buffer_alloc):
Treat a pad alloc with new caps the same as if we were not
negotiated, in order to allow a changing upstream output
to produce a new format of data.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event):
Check if the caps are NULL, this can happen if the element
is shutting down and the pad caps are set to NULL.
