Commit graph

285 commits

Author SHA1 Message Date
Thiago Santos
b7a0be23c6 adaptivedemux: replace ghostpad with a standard pad
Handling the ghostpad and its internal pad was causing more issues
than helping because of their coupled activation/deactivation
actions.

As we have to install custom chain,event and query functions it is
better to use a floating sink pad internally in the demuxer and just
use those pad functions to push through a standard pad in the demuxer

https://bugzilla.gnome.org/show_bug.cgi?id=757951
2016-01-15 11:32:37 -03:00
Tim-Philipp Müller
17f0faa368 hlsdemux: put boolean values into gboolean variables
And remove superfluous assignments.
2016-01-06 15:25:04 +00:00
Thiago Santos
bf57be7fc7 hlsdemux: fix reverse playback seek with snap flags
Properly handle snap flags during reverse seeking. In this case
the before/after are also reversed, so handle those as such.

For example: with a sequence of 1s fragments:

|-- 0 --|-- 1 --|-- 2 --|-- 3 --|

If you seek to 1.5s it is inside fragment 1. With reverse and

snap-before: should play from the end of fragment 1
snap-after: should play from the end of fragment 0
2016-01-06 10:23:13 -03:00
Thiago Santos
5d87f68f6c hlsdemux: simplify snap flags checking
Replace:
if (boolean) var = true;

with:
var = (boolean);
2016-01-06 10:23:13 -03:00
Thiago Santos
b8e0c365c4 hlsdemux: respect keyunit flag for position
Set the segment start position when keyunit flag is active
2016-01-06 10:23:13 -03:00
Alex Ashley
f6bff8f5f5 hlsdemux: unquote all the quoted-string attributes
The URI attribute from the EXT-X-KEY tag and the URI attribute from the
EXT-X-I-FRAMES-ONLY tag are both quoted-string attibutes that have their
quotation marks removed during parsing. The CODECS attribute of the
EXT-X-STREAM-INF is also a quoted-string attribute, but this attribute
was not being un-quoted.

This commit changes the parser to always unquote all quoted-string
attributes and adjusts the unit tests to this new bevahiour for the
CODECS attribute.

An additional test is added to check that parsing of all of the fields
in the EXT-X-STREAM tag is correct, including those that contain comma
characters.

https://bugzilla.gnome.org/show_bug.cgi?id=758384
2015-12-22 11:15:32 -03:00
Thiago Santos
a072101441 hlsdemux: make sure every bad update_playlist return sets an error
Otherwise it segfaults when reporting the error in the bus
2015-12-22 10:16:16 -03:00
Tim-Philipp Müller
d5e115171b hlsdemux: reflow update_playlist a bit
Reduce indentation by erroring out directly on failure.
2015-12-19 21:12:17 +00:00
Tim-Philipp Müller
8be5551dff hlsdemux: fix potential error leak
Clear error as soon as we determine that the download failed,
otherwise there are code paths where we might return without
clearing it ever, which would leak the GError then. Also, we
can pass a NULL GError pointer to _fetch_uri(), so just do that
instead of passing one that we're going to just free again
right away anyway.
2015-12-19 21:06:02 +00:00
Thiago Santos
29de588e2f hlsdemux: always set timestamp on reverse playback
Downstream needs to be able to restore the timestamps after a discont
to do reverse playback

https://bugzilla.gnome.org/show_bug.cgi?id=759592
2015-12-18 18:52:03 -03:00
Duncan Palmer
612f16936c hlsdemux: add support for seeking to fragment boundaries
Setting the seek flags to GST_SEEK_FLAG_SNAP_* will change the seek
target time to a segment boundary.

Based on original work by Ben Willers <bwillers@digisoft.tv>.

https://bugzilla.gnome.org/show_bug.cgi?id=759108
2015-12-08 09:57:24 +02:00
Sebastian Dröge
821320fbc4 hlsdemux: Resync live playlists to the 3rd newest fragment if we fall off the playlist
As HLS does not provide any way of knowing the server's clock, and we do
buffering of "live" streams, at some point we will fall behind the server in
many cases and would have to advance to a fragment that is not in the playlist
anymore.

Previously we would've just resynced to the next oldest fragment that is still
there, but this causes problems as from this point onwards we would always
fall off the playlist again all the time.
Instead we now resync and move to the 3rd newest fragment like we would do
when starting playback of a live stream.

https://bugzilla.gnome.org/show_bug.cgi?id=758987
2015-12-04 18:06:30 +02:00
Tim-Philipp Müller
fe1923e1e6 hls: m3u8: remove superfluous gst_m3u8_copy() implementation
No need to implement _copy() when we just copy a list that
we're freeing three lines later anyway. Instead just steal
the new main list.
2015-12-03 18:25:12 +00:00
Maroš Ondrášek
905158a055 hlsdemux: update current variant if connection speed is set
If connection speed is set, playlist according
to connection speed is selected as current playlist.

Problem is that the current variant of main playlist still
points to previously set variant.
If previously set variant doesn't correspond to current
playlist, then it causes unnecessary change of playlist
to the same playlist after first fragment is downloaded,
because of not updated current variant.

To fix this, we need to make sure that current variant
of main playlist corresponds to the current playlist

https://bugzilla.gnome.org/show_bug.cgi?id=758946
2015-12-02 14:39:12 +02:00
Jan Schmidt
77b302b5da hlsdemux: Tell the base class the fragment duration
adaptivedemux uses the fragment duration as a delay
in some cases, so make sure to set it.
2015-12-02 22:29:38 +11:00
Jan Schmidt
952275ad99 hlsdemux: When switching bitrate variants, don't jump back
Don't jump backward to 3 files from the end of the playlist
when switching variants - it just means we downloaded
fragments fast and caught up to the end of the playlist.

Disable that by treating a variant switch as a playlist
update, not a restart due to a seek or so.
2015-12-02 22:29:38 +11:00
Alex Ashley
0745d567a7 hlsdemux: correct the calculation of seek range of non-live streams
The seek range calculation for on-demand streams was incorrectly
excluding the last three segments of the stream. This three segment
rule should only be applied to live streams [1].

[1] https://tools.ietf.org/html/draft-pantos-http-live-streaming-17#section-6.3.3

https://bugzilla.gnome.org/show_bug.cgi?id=758386
2015-12-02 10:16:25 +02:00
Tim-Philipp Müller
64adb1998d hlsdemux: fix crash when decryption key can't be downloaded
Happened with
http://sslhls.m6tv.cdn.sfr.net/hls-live/livepkgr/_definst_/m6_hls_aes/m6_hls_aes_856.m3u8
if glib-networking was not installed (since key has https uri).
2015-12-01 18:01:36 +00:00
Tim-Philipp Müller
97ea56e91c hls: m3u8: remove pointless client_has_main() function
We always have a main list.
2015-12-01 17:51:34 +00:00
Tim-Philipp Müller
0ed4620033 hls: m3u8: remove unused _get_current_fragment_duration() function 2015-12-01 17:51:34 +00:00
Tim-Philipp Müller
e68914eeec hls: m3u8: remove unused m3u8 client update_failed_count field 2015-12-01 17:51:34 +00:00
Tim-Philipp Müller
5443cca406 hls: m3u8: remove helper var that's only used during parsing from structure
Just keep that local to the parsing function.
2015-12-01 17:51:34 +00:00
Tim-Philipp Müller
efe62292a3 hls: rename plugin from fragmented to hls 2015-12-01 17:51:34 +00:00
Sebastian Dröge
fac4ed18d4 hlsdemux: Always give timestamps if we're discont and don't mark stream discont if a playlist change was not successful
If the stream is discont, we must provide a timestamp in any case. Elements
like tsdemux are not going to output anything if we give a NONE timestamp
after a discont.

Also marking a stream as discont if a playlist change was not successful would
lead to the above situation, but in that case we are not required at all to
mark the stream discont as we're still at the old playlist.
2015-12-01 19:47:59 +02:00
Reynaldo H. Verdejo Pinochet
86ec812429 Remove unnecessary NULL checks before g_free()
g_free() is NULL-safe
2015-11-18 16:05:42 -08:00
Tim-Philipp Müller
3015cd75e4 hls: m3u8: don't leak GList nodes when matching up variant lists after master list update 2015-11-06 00:48:42 +00:00
Florin Apostol
eab158a669 adaptivedemux: fixed multithread support
https://bugzilla.gnome.org/show_bug.cgi?id=755169
2015-10-29 10:20:45 +00:00
André Draszik
e0b4290998 hlsdemux: don't crash or leak memory on broken master playlist
If a (master) playlist contains a variant list entry without a
URI then during parsing of the next variant list entry we are
a) leaking the entry we're currently parsing (new_list), and
b) free'ing the pointer to the previous list entry (list) without
   updating the pointer.

Hence when then adding the URI for the latest parsed entry, incorrect
information is stored, as the information is used from 'list' which
is not valid memory anymore, also leading to crashes.

Fix this by correctly storing the new variant list entry pointer
as needed.

https://bugzilla.gnome.org/show_bug.cgi?id=756861
2015-10-25 09:26:34 +00:00
Tim-Philipp Müller
344d100b1c hlsdemux: change dispose function to finalize 2015-10-23 18:51:43 +01:00
Tim-Philipp Müller
b8a155c17d hlsdemux: remove helper function only used once 2015-10-23 18:51:43 +01:00
Tim-Philipp Müller
917b034238 hlsdemux: remove deprecated 'fragments-cache' property
It's been non-functional for two cycles now, let's
get rid of it.
2015-10-23 18:51:18 +01:00
Tim-Philipp Müller
1c8d844ece hlsdemux: m3u8: move file lookup by sequence directly into code
Nicer to read, two lines of code less, and also the callback
function should've been a GCompareFunc that returns a gint
and not a boolean (it did work correctly, was just confusing).
2015-10-23 18:20:01 +01:00
Tim-Philipp Müller
28ac033773 hlsdemux: m3u8: clean-up: remove unused argument in function call 2015-10-23 18:19:55 +01:00
Tim-Philipp Müller
da682fc130 hlsdemux: m3u8: clean-up: reindent header for better readability
And remove duplicate define.
2015-10-23 18:19:49 +01:00
Edward Hervey
f7c4bb5ac6 hls/m3u8: Update current position in all cases
In order to ensure the sequence_position will always be consistently updated,
store the current file duration.

This way, when we advance, we can always increment the position based on what
was previously outputted.

https://bugzilla.gnome.org/show_bug.cgi?id=752132
2015-10-19 14:45:42 +02:00
Thiago Santos
d5f79b8529 hls: if media sequence is not specified, use 0
Allows playlists that are missing the mediasequence information to
be correctly parsed. If the playlist was updated without reseting
the mediasequence it would constantly increase over subsequent updates,
leading to issues during playback.
2015-10-14 21:33:27 -03:00
Edward Hervey
0e663fca94 hls: Allow debugging of the playlist
Helps debugging issues
2015-10-14 18:01:04 +02:00
Edward Hervey
8d86a8b75d hlsdemux: Avoid negative sequence numbers
For live streams, we want to make sure there's a certain distance
between the sequence to play and the last (earliest) fragment.

The problem is that it assumes there are at least 3 fragments in
the playlist, which might not always be the case (like in the case
of a server restarting and gradually adding fragments).

In order to avoid ending up with negative sequence numbers (which
will just loop forever), limit the new target sequence number to
the highest of:
* either the first sequence number of the playlist (fallback)
* or 3 fragments from the last one (standard behaviour)
2015-10-14 18:01:04 +02:00
Sebastian Dröge
f5dd41d710 Update GLib dependency to 2.40.0 2015-10-02 22:24:19 +03:00
Tim-Philipp Müller
cec0ef105f hls: m3u8playlist: more clean-ups
Remove unused functions; move GstM3U8 struct into .c file,
and indent the header so it's nice to read.
2015-09-30 00:43:26 +01:00
Tim-Philipp Müller
cae2fa0cef hls: m3u8playlist: fix silly queue iteration code 2015-09-30 00:43:26 +01:00
Tim-Philipp Müller
4a9a0da50f hls: m3u8playlist: more minor playlist_render() clean-ups
Move the TAG defines directly into the code, not sure what
their purposes is, these are printf format strings so having
them directly as literals in the code where they're used
makes the code easier to follow.
2015-09-30 00:43:26 +01:00
Tim-Philipp Müller
386f173eaf hls: m3u8playlist: move entry rendering into render_playlist()
Makes the code easier to follow and avoids unnecessary temporary
strings, since we can just append to the playlist GString directly.
2015-09-30 00:43:26 +01:00
Tim-Philipp Müller
54e1753da4 hls: m3u8playlist: simplify gst_m3u8_playlist_render()
Remove playlist_str GString variable from GstM3U8Playlist struct,
since it's only used temporarily in playlist_render(). Might just
as well keep it local then.
2015-09-30 00:43:26 +01:00
Tim-Philipp Müller
019cdea1bd hls: remove unused macro and direct gio usage 2015-09-30 00:43:26 +01:00
Philippe Normand
261d8daca0 adaptivedemux: prefix the statistics message name macro
Keep old define around for now.

https://bugzilla.gnome.org/show_bug.cgi?id=754686
2015-09-17 17:39:27 +01:00
Tim-Philipp Müller
536e3742aa Fix file permissions of some files 2015-08-28 19:55:59 +01:00
Athanasios Oikonomou
22456ce032 hlsdemux: select correct position for live streams that don't remove fragments
Some live streams (eg youtube) don't remove fragments in order to allow
seeking back in time (live + vod).

When gst_m3u8_client_has_next_fragment is called, we are getting wrong fragment
because current_file points in first file of the fragments list resulting in
watching the stream from the beginning again.

This patch sets current_file to nth fragment for live streams, then on
gst_m3u8_client_has_next_fragment will keep up with the live stream.

https://bugzilla.gnome.org/show_bug.cgi?id=753344
2015-08-26 12:11:57 +03:00
Arnaud Vrac
a4cb032355 hlsdemux: abort playlist update when cancelled
Otherwise the download thread will get stuck, since the downloader is
disabled.
2015-08-19 16:22:44 +03:00
Thiago Santos
bc33d22635 hlsdemux: don't warn about duration if it is not known
And also print the values in case of warning
2015-08-07 11:24:52 -03:00
Thiago Santos
2ed8a819f6 hlsdemux: demote error to warning
It is not fatal and can be quite normal when the network is
too slow
2015-07-24 10:09:19 -03:00
Jimmy Ohn
1270afae44 hlsdemux: Fix wrong gst-launch command in the description
Fix wrong gst-lauch command in the description.
This patch may help people to get right testing results using the script.

https://bugzilla.gnome.org/show_bug.cgi?id=750143
2015-06-05 12:21:41 -03:00
Thiago Santos
0a63fa7a01 hlsdemux: drop TODO that doesn't need a solution
Connection speed is only checked at that point in hlsdemux so there
is no real need to refactor it.

https://bugzilla.gnome.org/show_bug.cgi?id=749328
2015-06-05 09:43:31 -03:00
Thiago Santos
581d8c0b8d Revert "hlsdemux: Simplify logic in process_manifest"
This reverts commit 4ca3a22b6b.

The connection-speed=0 is used as a special value in the property
of hlsdemux to mean 'automatic' selection, m3u8.c doesn't need
to know about that as it should be as simple as possible.

So this patch hides this automatic selection documented in hlsdemux
into m3u8 logic and I think the gets harder to understand the code.

It also makes the hlsdemux unit tests work again

https://bugzilla.gnome.org/show_bug.cgi?id=749328
2015-06-05 09:43:10 -03:00
Edward Hervey
04b010a883 hlsdemux: Search more when advancing fragment
In live situations, it is not uncommon for the current fragment to end
up out of the (updated) play range (lowest/highest sequence). But the next
fragment to play *is* present in the play range.

When advancing, if we can't find the current GstM3U8MediaFile, don't abort
straight away. Instead, look if a GstM3U8MediaFile with the next sequence value
is present, and if so switch to it.

https://bugzilla.gnome.org/show_bug.cgi?id=750028
2015-05-28 14:56:36 +02:00
Thiago Santos
6f1c58dedf hlsdemux: remove more unused attributes
Those are not used or only read
2015-05-27 06:17:49 -03:00
Thiago Santos
030700a24b hlsdemux: remove unused attribute
It is never read for anything useful
2015-05-27 05:36:10 -03:00
Jimmy Ohn
4ca3a22b6b hlsdemux: Simplify logic in process_manifest
Simplify logic in process_manifest and remove a TODO item.

https://bugzilla.gnome.org/show_bug.cgi?id=749328
2015-05-18 10:52:35 +03:00
Tim-Philipp Müller
699452ef31 Remove obsolete Android build cruft
This is not needed any longer.
2015-04-26 18:59:32 +01:00
Sebastian Dröge
7c2a5da125 hlsdemux: Use the downloader of the base class instead of creating our own
The one of the base class is completely unused because we override all
the downloading here, so let's just use that one instead.
2015-04-23 17:47:18 +02:00
Sebastian Dröge
5fd2fc3050 hlsdemux: Don't error out if we can't match variant playlists after updating
It's better to just select some random variant playlist instead of stopping,
chances are that it's still continuing to work and we might just have to
select a different variant again later.
2015-04-23 17:47:18 +02:00
Sebastian Dröge
bb36ffb633 hlsdemux: Fix how the playlists are refreshed
We should only refresh the currently selected variant playlist (if any,
otherwise the main playlist), not the main playlist. And only try to
refresh the main playlist if updating the variant playlist fails.

Some servers (Wowza) use the request of the main playlist to create a
"session", which is then part of the URI of the variant playlist and
also the fragments. Refreshing the main playlist would generate a new
session, and the server rate limits that usually. And after a few retries
the server just kicks us out.

Also as a side effect we now use the same downloader for all playlists, so
that we only have 2 instead of 3 connections to the server. And also
previously we just ignored the downloaded data from the main playlist that
the base class gave to us.
2015-04-23 17:47:18 +02:00
Sebastian Dröge
0cd3938345 adaptivedemux: Allow subclasses to override how a new manifest would be downloaded 2015-04-23 17:47:18 +02:00
Thiago Santos
86a503a29b hlsdemux: handle too short segments
When the segment is very short it might be the case that the
typefinding fails and when finishing the segment hlsdemux would
consider the remaining data (pending_buffer) as an encryption
leftover.

This patch fixes it and makes sure an error is properly posted
if typefind failed by refactoring buffer handling to a function
and using it from the data_received and finish_fragment functions.
2015-04-22 20:21:02 -03:00
Thiago Santos
6c513a9d1e hlsdemux: use correct variable type
gst_buffer_resize needs gssize and not gsize. This makes gdb
print it correctly when debugging.
2015-04-22 19:04:43 -03:00
Sebastian Dröge
6c968ed3da hlsdemux: Fix seeking
We also have to update the current_file GList pointer in the M3U playlist
client, otherwise we are just continuing playback from the current position
instead of seeking.
2015-04-21 18:30:33 +02:00
Sebastian Dröge
1e1e73a0f2 hlsdemux: Don't call unlock() just to call lock() immediately afterwards 2015-04-21 18:30:33 +02:00
Thiago Santos
75c9a5f129 hlssink: write the playlist end marker on EOS
Catch EOS from the multifilesink and add the endlist marker to
the playlist when it happens

https://bugzilla.gnome.org/show_bug.cgi?id=747319
2015-04-04 11:00:10 -03:00
Thiago Santos
f00aec48fa hlssink: implement a chain_list to request key unit for segments
upstream might send buffer lists instead of buffers and hlssink's
probe won't get called and a new segment won't be created when needed.

This patch fixes it by adding a chain_list function to the sink pad
that will just pass through the whole bufferlist if no segment needs
to be requested at the moment or convert the list into buffers to
check the proper timestamp to request the next key-unit that will
start the segment.

https://bugzilla.gnome.org/show_bug.cgi?id=746906
2015-03-30 12:31:08 -03:00
Thiago Santos
87f8d7890c hlsdemux: set timestamp on discont buffers
Make sure discont buffers have its timestamp set to allow downstream
to resync if needed
2015-03-04 08:00:48 -03:00
Alex Ashley
a08dd85608 hlsdemux: select correct starting position for live streams
When playing live HLS streams, the media playback starts from the
beginning of the media playlist. When playing a live HLS stream,
media playback should start from 3 fragments from the end of the
playlist.

See section 6.3.3. of the HLS draft [1]

This commit changes the logic to select 3 fragments from the end when
playing a live stream.

[1] http://tools.ietf.org/html/draft-pantos-http-live-streaming-12#page-29

https://bugzilla.gnome.org/show_bug.cgi?id=727742
2015-02-20 19:00:01 -03:00
Guillaume Seguin
b75f64d72e hlssink: reduce playlist's EXT-X-VERSION to 3
We are not using any features greater than the 3rd version,
so reduce to what we actually use to make it compatible with
more players

https://bugzilla.gnome.org/show_bug.cgi?id=744689
2015-02-19 12:17:21 -03:00
Thiago Santos
f79d9522c5 hlsdemux: remove unused define 2015-02-17 11:53:49 -03:00
Thiago Santos
f7a1649c77 adaptivedemux: add bitrate-limit property
Move the property from subclasses to adaptivedemux, it allows
selecing the percentage of the measured bitrate to be used when
selecting stream bitrates
2015-02-17 11:12:42 -03:00
Thiago Santos
00bdac51a3 hlssink: allow creation of 'infinite' playlist
Allow the playlist-length to accept '0' as a value, indicating
that no segment should be removed from the playlist. This allows
generating playlists to be used as VOD when complete.
2015-02-17 11:12:42 -03:00
Thiago Santos
6ec5904d46 hlssink: remove unused attribute
the GFile attribute is never used
2015-02-17 11:12:41 -03:00
Thiago Santos
e9ab79dc36 adaptivedemux: add connection-speed property
Allows to set a bitrate directly instead of measuring it internally
based on the received chunks. The connection-speed was removed from
mssdemux and hlsdemux as it is now in the base class
2015-02-17 11:12:41 -03:00
Thiago Santos
229a15b393 adaptivedemux: refactor chunk downloading flow
Add more power to the chunk_received function (renamed to data_received)
and also to the fragment_finish function.

The data_received function must parse/decrypt the data if necessary and
also push it using the new push_buffer function that is exposed now. The
default implementation gets data from the stream adapter (all available)
and pushes it.

The fragment_finish function must also advance the fragment. The default
implementation only advances the fragment.

This allows the subsegment handling in dashdemux to continuously download
the same file from the server instead of stopping at every subsegment
boundary and starting a new request
2015-01-19 15:30:04 -03:00
Vincent Penquerc'h
d1e8b88eaa hlsdemux: remove unused fragments_cache field 2015-01-16 11:43:22 +00:00
Vincent Penquerc'h
b5860af143 hlsdemux: a few leak fixes 2015-01-16 11:43:22 +00:00
Thiago Santos
d310c0c460 hlsdemux: cache current file position in the list
Avoids iterating the list everytime to look for the next segment
to be used (or to advance to the next one).
2015-01-08 17:55:33 -03:00
Thiago Santos
308b2e5aaf hlsdemux: simplify next segment checking functions
Optimize loop by moving condition outside of it and reuse the
find_next_fragment function to check if there is next instead of
replicating the same loop
2015-01-08 17:55:33 -03:00
Thiago Santos
e21abb62e0 hlsdemux: cache total duration to avoid iterating at every query
Duration queries can be done a few times per second and would cause
the segment list to be traversed for every one. Caching the duration
prevents that.
2015-01-08 17:55:33 -03:00
Luis de Bethencourt
9dcf650a17 hlsdemux: g_return_if_fail in function with return type
Need to use g_return_val_if_fail() when the function returns a type, in this
case a gboolean
2015-01-08 15:54:18 +00:00
Thiago Santos
dd7cb8f632 hlsdemux: implement _has_next_fragment to avoid busy looping
It will allow the demuxer to wait for a fragment to be available instead
of busy looping polling the playlist for a new fragment
2015-01-08 09:59:01 -03:00
Thiago Santos
3a6c2b6b67 hlsdemux: remove duplicate call to uri_join 2015-01-07 10:23:31 -03:00
Thiago Santos
3e9b89111a hlsdemux: skip checking '#EXT-X-' token for all entries
Put this common check before to avoid repeating it for all possible
entries to save some cycles
2015-01-07 09:39:56 -03:00
Thiago Santos
c79e8a78ac hlsdemux: avoid using g_list_append for creating segments list
Use g_list_prepend and reverse it at the end to skip traversing the
same list for every new segment
2015-01-07 09:30:40 -03:00
Thomas Bluemel
cd6069f5af hlsdemux: Don't use approximate duration for fragment buffer pts
The duration values in playlists are approximate only, and for
playlist versions 2 and older they are only rounded integer values.
They cannot be used to timestamp buffers.  This resulted in playback
gaps and skips because the actual duration of fragments is slightly
different.  The solution is to only set the pts of the very first
buffer processed, not for each fragment.
2015-01-07 09:30:40 -03:00
Alex Ashley
50b5d94b2a hlsdemux: Implement live seeking
hlsdemux assumes that seeking is not allowed for live streams,
however seek is possible if there are sufficient fragments in the
manifest. For example the BBC have live streams that contain 2 hours
of fragments.

The seek code for both live and on-demand is common code. The
difference between them is that an offset has to be calculated
for the timecode of the first fragment in the live playlist.

When hlsdemux starts to play a live stream, the possible seek range
is between 0 and A seconds. After some time has passed, the beginning of
the stream will no longer be available in the playlist and the seek
range is between B and C seconds.

Seek range:
start          0 ........... A
later               B ........... C

This commit adds code to keep a note of the B and C values
and the highest sequence number it has seen. Every time it updates the
media playlist, it walks the list of fragments, seeing if there is a
fragment with sequence number > highest_seen_sequence. If so, the values
of B and C are updated. The value of B is used when timestamping
buffers.

It also makes sure the seek range is never closer than three fragments
from the end of the playlist - see 6.3.3. "Playing the Playlist file"
of the HLS draft.

https://bugzilla.gnome.org/show_bug.cgi?id=725435
2015-01-05 17:59:08 -03:00
Thiago Santos
104bd7cf02 hlsdemux: only typefind when we have a minimum amount of data
For small amounts some data might be mistyped and it would cause
the pipeline to fail. For example if you have AAC inside mpegts,
for small amounts, the AAC samples would cause the typefinder to
think it is AAC and not mpegts.

https://bugzilla.gnome.org/show_bug.cgi?id=736061
2014-12-30 08:35:21 -03:00
Vijay Jayaraman
68e77265a0 hlsdemux: typefind might fail if first buffer is too short
If typefind fails, check to see if the buffer is too short for typefind. If this is the case,
prepend the decrypted buffer to the pending buffer and try again the next time around.

https://bugzilla.gnome.org/show_bug.cgi?id=740458
2014-12-23 10:08:57 -03:00
Thiago Santos
1e9ce11efd hlsdemux: port to adaptive base class
Conflicts:
	ext/hls/gsthlsdemux.c
	ext/hls/gsthlsdemux.h
2014-12-23 10:08:57 -03:00
Flávio Ribeiro
c306e0dfa7 hlssink: remove unnecessary title on EXTINF tag
According to the HLS spec the remainder of the line following
the comma on EXTINF tag is not required. This patch removes
the fake title and saves some bytes on the playlist.

https://bugzilla.gnome.org/show_bug.cgi?id=741096
2014-12-04 17:52:08 +01:00
Tim-Philipp Müller
f216b7bb11 Sprinkle some G_PARAM_DEPRECATED and #ifndef GST_REMOVE_DEPRECATED 2014-11-02 17:19:34 +00:00
Tim-Philipp Müller
69ee564d5c hls: fix indentation 2014-11-02 17:17:46 +00:00
Matthieu Bouron
7fb584b087 hlsdemux: reset end_of_playlist attribute when we receive a seek
https://bugzilla.gnome.org/show_bug.cgi?id=738696
2014-10-21 12:55:42 +02:00
Thomas Bluemel
c87835a79f hlsdemux: Fix accessing invalidated memory
In gst_hls_demux_get_next_fragment() the next fragment URI gets
stored in next_fragment_uri, but the gst_hls_demux_updates_loop()
can at any time update the playlist, rendering this string invalid.
Therefore, any data (like key, iv, URIs) that is taken from a
GstM3U8Client needs to be copied. In addition, accessing the
internals of a GstM3U8Client requires locking.

https://bugzilla.gnome.org/show_bug.cgi?id=737793
2014-10-07 15:22:27 +03:00
Philippe Normand
6d67b5263f hlsdemux: lock client mutex before entering the retry_failover block
This is consistent with the case where the block execution is
triggered by the goto invoked after the current_variant update.

https://bugzilla.gnome.org/show_bug.cgi?id=736919
2014-09-18 23:28:15 +01:00
George Kiagiadakis
f4546b64ea hlsdemux: synchronize with the download loop thread to signal it to continue
If EOS or ERROR happens before the download loop thread has reached its
g_cond_wait() call, then the g_cond_signal doesn't have any effect and
the download loop thread stucks later.

https://bugzilla.gnome.org/show_bug.cgi?id=735663
2014-09-18 13:38:27 -03:00