Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
Use a bigger type in integer mode for the intermediate results to
prevent overflows. This fixes the crippled sound when using the
equalizer in integer mode. Fixes bug #510865.
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/spectrum/Makefile.am:
Fix includes order
* tests/check/Makefile.am:
Exclude v4l2src from the states test - it takes too long to start.
* tests/check/elements/spectrum.c:
Make the test run properly with CK_FORK=no
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_finalize):
Unparent all bands from the equalizer when finalizing to stop
leaking them.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Remove preset iface again. We'll re-add this after its been released
in -good.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Activate preset iface and upload two presets here.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
* gst/equalizer/gstiirequalizernbands.c:
And continue to update docs. Also include some sample code
for the n-band equalizer in the docs.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_class_init):
* gst/equalizer/gstiirequalizer3bands.c:
(gst_iir_equalizer_3bands_class_init):
* gst/equalizer/gstiirequalizernbands.c:
Update docs and property ranges to the real values.
Original commit message from CVS:
* gst/equalizer/demo.c: (main):
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_class_init), (setup_filter):
Allow setting 0 as bandwidth and handle this correctly.
Also handle a bandwidth of rate/2 properly.
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_class_init):
Make it possible to generate a N-band equalizer with 1 bands. The
previous limit of 2 was caused by a nowadays replaced calculation
doing a division by zero if number of bands was 1.
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/demo.c: (on_window_destroy), (on_configure_event),
(on_gain_changed), (on_bandwidth_changed), (on_freq_changed),
(draw_spectrum), (message_handler), (main):
Add small demo application based on the spectrum demo applications
that gets white noise as input, pushes it through an equalizer and
paints the spectrum. For every equalizer band it's possible to set
gain, bandwidth and frequency.
* gst/equalizer/gstiirequalizer.c: (setup_filter):
Add some guarding against too large or too small frequencies and
bandwidths. Also improve debugging a bit.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init), (arg_to_scale),
(setup_filter), (gst_iir_equalizer_compute_frequencies):
Replace filters with a bit better filters for which we can actually
find documentation, which don't change anything on zero gain, etc.
Make the frequency property of the bands writable, rename the
band-width property to bandwidth and change the meaning to the
frequency difference between bandedges, change the meaning of the
gain property to dB instead of a weird scale between -1 and 1 that
has no real meaning.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init), (gst_iir_equalizer_band_init),
(gst_iir_equalizer_band_get_type), (gst_iir_equalizer_class_init),
(setup_filter), (gst_iir_equalizer_setup):
* gst/equalizer/gstiirequalizer.h:
Move bandwidth property to the separate bands and add float64 support.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_child_proxy_get_child_by_index),
(gst_iir_equalizer_child_proxy_get_children_count),
(gst_iir_equalizer_child_proxy_interface_init),
(gst_iir_equalizer_class_init), (arg_to_scale), (setup_filter),
(gst_iir_equalizer_compute_frequencies):
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_class_init):
* gst/equalizer/gstiirequalizer3bands.c:
(gst_iir_equalizer_3bands_class_init):
* gst/equalizer/gstiirequalizernbands.c:
Better algorith for the center frequencies. Subtract band filters from
input for negative gains. Rework the gain mapping.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_init):
A 10 band EQ should be initialized to 1 bands and not to 3.
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/gstiirequalizer.c: (_do_init),
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init),
(gst_iir_equalizer_band_get_type),
(gst_iir_equalizer_child_proxy_get_child_by_index),
(gst_iir_equalizer_child_proxy_get_children_count),
(gst_iir_equalizer_child_proxy_interface_init),
(gst_iir_equalizer_base_init), (gst_iir_equalizer_class_init),
(gst_iir_equalizer_finalize), (setup_filter),
(gst_iir_equalizer_compute_frequencies),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_setup), (plugin_init):
* gst/equalizer/gstiirequalizer.h:
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_base_init),
(gst_iir_equalizer_nbands_class_init),
(gst_iir_equalizer_nbands_init),
(gst_iir_equalizer_nbands_set_property),
(gst_iir_equalizer_nbands_get_property):
* gst/equalizer/gstiirequalizernbands.h:
Refactor plugin into a base class and a first subclass (nband eq). The
nband eq uses GstChildProxy and is controlable. More subclasses will
follow.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_class_init),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_filter_inplace):
Rename "values" property to "band-values" and change type into a
GValueArray, so it's more easily bindable and the range of the
values passed in is defined and checked etc.; also do some
locking.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c: (gst_audiofilter_link):
fix link function to always query channels and query width for
floats
* configure.ac:
add equalizer dir
* gst/equalizer/Makefile.am:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_get_type),
(gst_iir_equalizer_base_init), (gst_iir_equalizer_class_init),
(gst_iir_equalizer_init), (gst_iir_equalizer_finalize),
(arg_to_scale), (setup_filter),
(gst_iir_equalizer_compute_frequencies),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_filter_inplace), (gst_iir_equalizer_setup),
(plugin_init):
add an equalizer
