Use of subframe API from videodecoder base class.
This subframe allows to decode subframe instead of
waiting for a whole frame.
The subframe uses the same frame over the whole
subframe passing process and will wait
for a signal to know the last subframe.
In this implementation it will use
GST_VIDEO_BUFFER_FLAG_MARKER as the
end of batch of subframes.
This implement subframe mode negotation for the Zynq based on caps
negotation. This mode can be combined with low-latency mode, in order to
reach the lowest possible latency (assuming the stream is within the
low-latency constraints for the HW).
... ! video/x-h264,alignment=nal ! omxh264dec ! ...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-omx/-/merge_requests/49>
The current setting of color properties are not very correct and
we will get some kind of "unknown Color Standard for YUV format"
warnings printed out by drivers. The video-color already provides
some standard APIs for us, and we can use them directly.
We also change the logic to: Finding the exactly match or explicit
standard first. If not found, we continue to find the most similar
one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2385>
A video decoder can now receive subframes and start decoding
instead of waiting for the full frame to be complete.
Subframe support will reduce latency as described in the
video encoder base class.
A unit test illustrating this API is available in
tests/check/libs/videodecoder.c.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/454>
if there is no pad name, the representation id
was NULL, causing a crash when writing the mpd file.
gst-launch-1.0 videotestsrc num-buffers=900 ! video/x-raw, width=800,
height=600, framerate=30/1 ! x264enc ! video/x-h264, profile=high !
dashsink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2064>
There may be leading frames after the IRAP frames, which has negative
POC. This kind of frames are allowed and they will be displayed before
the IRAP frame. So the warning should not be triggered for them. Init
the last_output_poc to G_MININT32 can avoid this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2380>
There may be leading frames after the IDR frame, which has negative
POC. This kind of frames are allowed and they will be displayed before
the IDR frame. So the warning should not be triggered for them. Init
the last_output_poc to G_MININT32 can avoid this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2380>
Instead of using the new "application/x-cbcs" caps, we are just adding
a new structure field "ciphe-mode", to indicate which encryption scheme
is used: "cenc", "cbcs", "cbc1" or "cens".
Similarly for the protection metadata, we add the "cipher-mode" field
to specify the encryption mode with which the buffers are encrypted.
"cenc": AES-CTR (no pattern)
"cbc1": AES-CBC (no pattern)
"cens": AES-CTR (pattern specified)
"cbcs": AES-CBC (pattern specified, using a constant IV)
Currently only "cenc" and "cbcs" are supported.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/1013>
Qualcomm GPU works fine with current implementation now.
Noticeable difference between when it was disabled and current
d3d11 implementation is that we now support GstD3D11Memory
pool, so there will be no more frequent re-binding decoder surface anymore.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2377>
When receiving RTCP packets early the funnel is not ready yet and
GST_FLOW_FLUSHING will be returned when pushing data to it's srcpad.
This causes the thread that handle RTCP packets to go to pause mode.
Since this thread is in pause mode there will be no further callbacks to
handle keep-alive for incoming RTCP packets. This will make the session
time out if the client is not using another keep-alive mechanism.
Change-Id: Idb29db05f59c06423fa693a2aeeacbe3a1883fc5
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-rtsp-server/-/merge_requests/211>
When getting backtraces, we were always creating a new Dwfl context and then
discarding it. The problem with that is that it resulted in having to re-scan a
lot of information for every single backtrace.
In order to fix that issue, use a global on-demand Dwfl context and use it with
a lock.
Furthermore, we were scanning the mappings of the
process (dwfl_linux_proc_report) for *every single step* in the backtrace, and
that function is horrendously expensive (does sscanf on /proc/PID/maps
...). While there is a possibility that new mappings might be available (new
plugins being loaded for example), we can limit ourselves to just do it once per
backtrace.
These two modifications speed up the elements_leaks unit test (which traces all
pads with full backtraces) by a factor of 6.
Partially fixes#567
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/504>
Adding the compatile profiles when we decide the final profile used for decoding.
The final profile candidates include:
1. The profile directly specified by SPS, which is the exact one.
2. The compatile profiles decided by the upstream element such as the h265parse.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2322>
This is a work-around to identify some main profile streams having
wrong profile_idc. There are some wrongly encoded main profile streams
which doesn't have any of the profile_idc values mentioned in Annex-A,
instead, general_profile_idc has been set as zero and the
general_profile_compatibility_flag[general_profile_idc] is TRUE.
Assuming them as MAIN profile for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2322>
The segmentation is stateful, its information may depend on the previous
segmentation setting. For example, if loop_filter_delta_enabled is TRUE,
the filter_level[GST_VP9_REF_FRAME_INTRA][1] should inherit the previous
frame's value and can not be calculated by the current frame's segmentation
data only. So we need to maintain the segmentation state inside the vp9
decoder and update it when the new frame header comes.
We also fix the CLAMP issue of lvl_seg and intra_lvl because of their wrong
uint type here.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2369>
The current way of DMA buffer mapping is simply forwarding the job
to parent's map function, which is a mmap(). That can not handle the
non-linear buffers, such as tiling, compressed, etc. The incorrect
mapping of such buffers causes broken images, which are recognized
as bugs. We should directly block this kind of mapping to avoid the
misunderstanding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2353>
